UFGS_01_75_00.pdf

UFGS 01 75 00

SECTION 01 75 00

STARTING AND ADJUSTING

05/12

1 PART 1 GENERAL

1.1 SUMMARY

Requirements of this Section apply to, and are a component part of, each section of the specifications.

1.2 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for Contractor Quality Control approval. Submit the following in accordance with Section 01 33 00

SUBMITTAL PROCEDURES:

SD-01 Preconstruction Submittals

Verification of Prior Experience; G

Documentation of Manufacturer's Prior Experience; G

Quality Control Plan; G

Manufacturer's Sample Warranty; G

Operation and Maintenance Data; G

Provide Evidence; G

SD-02 Shop Drawings

Drawings, Diagrams and Schedules; G

Diagrams and Instructions; G

Coordination Drawings; G

SD-03 Product Data

Catalog Cuts; G

Samples of Warranty Language; G

SD-05 Design Data file:///D:/Documents%20and%20Settings/bradley.CRAWFORD/My%20Documents/01%2033%2000.doc

Design Calculations; G

SD-06 Test Reports

Factory Tests; G

Functional Field Test; G

Final Acceptance Test; G

Test Procedures; G

SD-07 Certificates

Qualification of Manufacturer; G

Qualification of Installer; G

SD-08 Manufacturer's Instructions

Manufacturer's Administrative Requirements; G

Demonstration and Training Information; G

Manufacturer's Procedural Requirements; G

SD-09 Manufacturer's Field Reports

Documentation of the Testing and Verification Actions; G

SD-10 Operation and Maintenance Data

Operation and Maintenance Data; G

Safety and Security Data or Posters; G

1.2.1 Preconstruction and Pre-Testing Requirements

Deliver equipment and services to meet the requirements and specifications of their respective contract. Ensure all equipment is free of latent manufacturing and installation defects. The Government reserves the option to elect performance of acceptance testing by internal personnel, or a designated third party. Regardless of who performs the acceptance testing, ensure the requirements of acceptance are.

Submit the following for review and approval prior to the commencement of work and any testing, whether such testing is on site or elsewhere:

a. Verification of prior experience and expertise with similar project scope

b. Documentation of manufacturer's prior experience and expertise with similar project materials and systems

c. Quality control plan

d. Manufacturer's sample warranty and operation and maintenance data, with details regarding start-up procedures

e. Manufacturer's administrative requirements

f. Manufacturer's procedural requirements

g. Demonstration and training information

Submit the following certifications:

a. Provide evidence that products used within this specification are manufactured in the United States.

b. Qualification of manufacturer, including current licenses and insurance.

c. Qualification of [applicator][installer], including licenses and insurance.

1.2.2 Shop Drawings and Diagrams

Submit the following shop drawings, record drawings, and diagrams as required to correctly execute the installation of the work:

a. Diagrams and instructions from a manufacturer or fabricator for use in producing the product and as aids to the Contractor for integrating the product or system into the project;

b. Coordination drawings prepared by or for the Contractor to show how multiple systems and interdisciplinary work will be coordinated.

1.2.3 Product and Design Data

Submit all product data and any design calculations, mix designs, analyses or other data pertaining to the work to ensure a complete functional installation; including, but not limited to:

a. Catalog cuts, illustrations, schedules, diagrams, performance charts, instructions and brochures illustrating size, physical appearance and other characteristics of materials, systems or equipment for some portion of the work

b. Samples of warranty language when the contract requires [extended][no dollar limit] product warranties

c. Operation and maintenance data provided by the manufacturer to ensure the safe and efficient operation, maintenance and repair of the system or equipment provided

d. Safety and security data or posters provided by the manufacturer to be posted in a conspicuous visible location for operational and maintenance personnel

1.2.4 Tests Required

Perform tests to verify proper functioning of fire protection, fire suppression, HVAC, compressed air, electrical switchgear, protective relaying, fluid and gas systems, pump/motor combinations, boiler systems, hydraulic and pneumatic control, condition/performance monitoring systems, energy control and monitoring systems, and other assemblies and components that need to be tested as an interrelated whole.

1.2.4.1 Factory Tests

Submit certified copies of required tests performed at the factory to verify proper build. These test results will be used in the "Final Acceptance

Test" section to verify no shipping damage and proper installation.

1.2.4.2 Functional Field Test

Perform functional field tests test to verify that the system and components have been properly installed and are functioning properly. Perform test(s) in the presence of the Contracting Officer. Acceptance will be issued when system has performed per other sections and referenced industry standards.

Coordinate and submit documentation of the testing and verification actions taken by manufacturer's representative at the job site, in the vicinity of the job site, or on a sample taken from the job site to confirm compliance with manufacturer's standards or instructions.

1.2.4.3 Final Acceptance Test

Perform a formal test with full documentation using the approved recording form. Contracting Officer will witness this test and issue a written final acceptance. Provide final test data to the Contracting Officer with a cover letter clearly marked with the system name, date, and the words "Final Test

Data - Forward to the Systems Engineer/Condition Monitoring

Office/Predictive Testing Group for inclusion in the Maintenance Database."

1.2.4.4 Test Procedures

Submit test procedure and recording forms that document the test steps for approval to the Contracting Officer 21 calendar days prior to the proposed test date. Ensure procedures clearly state step by step instruction to verify system parameters, components, and functions.

2 PART 2 PRODUCTS

Not Used

3 PART 3 EXECUTION

Not Used

-- End of Section --