Exhibit_L_CDRLs__N55236-15-R-0008.docx

CONTRACT DATA REQUIREMENTS LIST (CDRL)

(1 Data Item) Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

17. PRICE GROUP

III

18. ESTIMATED

TOTAL PRICE

N/A

BLOCKS: 10, 11, 12 AND 13: THE PROCEDURE SHALL BE SUBMITTED ELECTRONICALLY TO THE PROJECT MANAGER OR SHIP BUILDING SPECIALIST (SBS), SOUTHWEST REGIONAL MAINTENANCE CENTER'S (SWRMC) ENGINEERING DEPARTMENT. SPECIFIC SUBMISSION REQUIREMENTS WILL BE CALLED OUT BY EACH DELIVERY ORDER'S STATEMENT OF WORK.

BLOCK 14: MEDIA REQUIREMENT - THE REPORT SHALL BE COMPATIBLE WITH MICROSOFT OFFICE SUITE, VERSION 2007 OR NEWER, AND EMAIL ATTACHEMENT WITH NOTIFICATION TO ALL ADDRESSEES:

ASSIGNED PROJECT MANAGER OR SHIP BUILDING SPECIALIST

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 6 Pages

CONTRACT DATA REQUIREMENTS LIST (CDRL)

Form Approved

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

17. PRICE GROUP

III

18. ESTIMATED

TOTAL PRICE

N/C

BLOCK 9: DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED; UNLESS PROPRIETARY OR GOVERNMENT CLASSIFIED INFORMATION APPLIES THEN DISTRIBUTION STATEMENT B APPLIES: U.S. GOVERNMENT AGENCIES ONLY.

BLOCKS: 10, 11,12 AND 13: THE PROCEDURE SHALL BE SUBMITTED ELECTRONICALLY TO THE PROJECT MANAGER (PM) OR SHIP BUILDING SPECIALIST (SBS), SOUTHWEST REGIONAL MAINTENANCE CENTER'S (SWRMC) ENGINEERING DEPARTMENT. SPECIFIC SUBMISSION REQUIREMENTS WILL BE CALLED OUT BY EACH DELIVERY ORDER'S STATEMENT OF WORK.

BLOCK 14: MEDIA REQUIREMENT - THE REPORT SHALL BE COMPATIBLE WITH MICROSOFT OFFICE SUITE, VERSION 2007 OR NEWER, AND EMAIL ATTACHEMENT WITH NOTIFICATION TO ALL ADDRESSEES:

RODELIO.TALIMAN@NAVY.MIL OR CURRENT SHIP BUILDING SPECIALIST

DATA ITEM DESCRIPTION

Title: Logistics Engineering Data/Commercial Off-the-shelf (COTS) Manuals/Data

Office of Primary Responsibility: SH/SWRMCC300 Applicable Forms: N/A

Use/relationship: This data will be used by the government to verify that NAVSEA Standard Items (SI) and Standard Work Items (SWI) were adhered and is on schedule relating in accordance to the task milestones and/or completion dates.

This DID contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID is for One-Time use on solicitation N55236-15-R-0008 only.

Requirements:

The Contractor shall provide the original equipment manufacturer's commercial manuals and documentation for all equipment(s) installed. Submission shall be provided along with a brief letter listing all documentation submitted and referencing this CDRL. If no commercial manuals/data exist for the system or equipment installed, provide written notification to the Government Contracting Officer Representative (COR). The Contractor shall obtain and provide all available Commercial-Off-the-Shelf (COTS) manuals/data including, but not limited to, operation, maintenance, parts lists, wiring diagrams, sketches and other available instructions applicable to equipment/systems installed.

Format: Style, format, and media of COTS manuals/data shall be in the original manufacturer's style, format, and media. The Contractor shall not deviate from commercially available format without approval of the COR.

END OF OT DID

CONTRACT DATA REQUIREMENTS LIST (CDRL)

Form Approved

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

17. PRICE GROUP

III

18. ESTIMATED

TOTAL PRICE

N/C

BLOCK 9: DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS. REFER OTHER REQUESTS TO SWRMC CODE 370, 3755 BRINSER STREET, SUITE 4, SAN DIEGO, CA 92136-5205.

BLOCKS: 10, 11,12 AND 13: THE PROCEDURE SHALL BE SUBMITTED ELECTRONICALLY TO THE PROJECT MANAGER (PM) OR SHIP BUILDING SPECIALIST (SBS), SOUTHWEST REGIONAL MAINTENANCE CENTER'S (SWRMC) ENGINEERING DEPARTMENT. SPECIFIC SUBMISSION REQUIREMENTS WILL BE CALLED OUT BY EACH DELIVERY ORDER'S STATEMENT OF WORK.

BLOCK 14: MEDIA REQUIREMENT - THE REPORT SHALL BE COMPATIBLE WITH MICROSOFT OFFICE SUITE, VERSION 2007 OR NEWER, AND EMAIL ATTACHEMENT WITH NOTIFICATION TO ALL ADDRESSEES:

Title: Logistics Engineering Data/Configuration Removal Data

Office of Primary Responsibility: SH/SWRMCC300 Applicable Forms: N/A

Use/relationship: This data will be used by the government to verify that any configuration identification data is accounted for on all removed equipment.

This DID contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID is for One-Time use on solicitation N55236-15-R-0008 only.

Requirements:

The Contractor shall provide configuration identification data for all removed equipment. The Contractor shall also report if there were no equipment removals in accomplishment of the work tasking. For all equipment removals, the Contractor shall report, at a minimum, the equipment Manufacturer/CAGE, Part Number/NSN, Item Name, and quantity removed. Data submission is not required for equipment repairs that do not result in a change to the installed configuration data.

Format: Style, format, and media of data shall be in Contactor's style, format, and media.

CONTRACT DATA REQUIREMENTS LIST (CDRL)

Form Approved

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

17. PRICE GROUP

III

18. ESTIMATED

TOTAL PRICE

N/C

BLOCK 9: DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED; UNLESS PROPRIETARY OR GOVERNMENT CLASSIFIED INFORMATION APPLIES THEN DISTRIBUTION STATEMENT B APPLIES; U.S. GOVERNMENT AGENCIES ONLY.

BLOCKS: 10, 11,12 AND 13: THE PROCEDURE SHALL BE SUBMITTED ELECTRONICALLY TO THE SHIP BUILDING SPECIALIST (SBS), SOUTHWEST REGIONAL MAINTENANCE CENTER'S (SWRMC) ENGINEERING DEPARTMENT. SPECIFIC SUBMISSION REQUIREMENTS WILL BE CALLED OUT BY EACH DELIVERY ORDER'S STATEMENT OF WORK.

BLOCK 14: MEDIA REQUIREMENT - THE REPORT SHALL BE COMPATIBLE WITH MICROSOFT OFFICE SUITE, VERSION 2007 OR NEWER, AND EMAIL ATTACHEMENT WITH NOTIFICATION TO ALL ADDRESSEES:

Title: Logistics Engineering Data/Commercial Vendor Descriptive Data

Office of Primary Responsibility: SH/SWRMCC300 Applicable Forms: N/A

Use/relationship: This data will be used by the government to verify that the contractor has provided descriptive data information for any equipment(s) installed which deviate from that specified in the alteration or repair specifications.

This DID contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID is for One-Time use on solicitation N55236-15-R-0008 only.

Requirements:

The Contractor shall provide commercial vendor descriptive data for any equipment(s) installed which deviate from that specified in the alteration or repair specifications. The Contractor shall also affirmatively report the case where installed equipment(s) conforms completely with the alteration or repair specifications. The Contractor shall report deviant equipment(s) identification and vendor descriptive data consisting of, at a minimum, the Original Equipment manufacturer (OEM)/CAGE, Part Number/NSN, Item Name, Price (U.S. Dollars), and quantity of equipment(s) installed. In addition, the Contractor shall report the function and location of installed equipment(s) which deviates from that specified in the alteration or repair specification. Equipment(s) is defined as any item of production, either by itself or in conjunction with other items that constitutes an end item of supply identified by a manufacturer's part or reference number. Part or reference numbers include manufacturers or Government part drawing, model, type and source controlling numbers, and specifications or standard part, drawing, or type numbers.

Format: Style, format, and media of data shall be in Contactor's style, format, and media.