9274V000-00646-CDRL A015-Technical Documentation.doc
DOC document 87 KB Posted
- Attached to
- CASK Containers Federal contract opportunity
- Solicitation number
- N4523A20Q4008
About this file
This data item description outlines engineering drawing requirements for a shielded shipping cask. The contractor must provide pre-fabrication drawings including materials of construction prior to start of fabrication. The drawings must be submitted electronically in unprotected searchable PDF format to the Navy technical point of contact. The Navy will have 10 working days to review and approve the drawings based on technical content and compliance with requirements. If revisions are required, the contractor has another 10 working days to resubmit.
The related solicitation seeks proposals for CASK containers under a small business set-aside. The NAICS code is 332439. The government anticipates a single award firm fixed price commercial contract with a base period and three option periods. Proposals are due by the date specified in the solicitation. The solicitation is issued under FAR Part 12 commercial item procedures.
View the file
Other files for this federal contract opportunity
Show all 21
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SHIPYARD ENGINEERING AND PLANNING PROCEDURES MANUALADVANCE \D 3.60
ADVANCE \D 9.35
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
Form Approved
OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Please DO NOT RETURN your form to either of these address. Send completed form to the Government issuing Contracting Officer for the Contract/PR No. Listed in Block E.
A. CONTRACT LINE ITEM NO.
| B. EXHIBIT |
| C. CATEGORY |
| TBD |
| A |
| TDP ______ TM ____________________ OTHER DRPR |
D. SYSTEM/ITEM
SHIELDED SHIPPING CASK
E. CONTRACT/PR NO
N4523A9274V000
F. CONTRACTOR
TBD
1. DATA ITEM NO.
A015
2. TITLE OF DATA ITEM
Engineering Drawings
3. SUBTITLE
Technical Documentation
4. AUTHORITY (Data Acquisition Document No.)
DI-DRPR-80651
5. CONTRACT REFERENCE
SOW
6. REQUIRING OFFICE
PSNS&IMF C/2310.3
7. DD 250 REQ
N/A
9. DIST STATEMENT REQUIRED
10. FREQUENCY
ASREQ
12. DATE OF FIRST SUBMISSION
SEE BLOCK 16
14. DISTRIBUTION
See Block 16
b. COPIES
8. APP CODE
A
11. AS OF DATE
SEE BLOCK 16
13. DATE OF SUBSEQUENT SUBMISSION
A. ADDRESSEE
Final
N/A
| Draft |
| Reg |
| Repr |
16. REMARKS
Block 3: THE CONTRACTOR SHALL PROVIDE IN THE CONTRACTOR’S FORMAT:
a complete set of pre-fabrication DRAWINGS FOR THE CASK INCLUDING MATERIALS OF CONSTRUCTION REQUIRED PER SPECIFICATION PARAGRAPH 3.2.1.7.
Block 8: THE pre-fabrication DRAWINGS FOR THE CASK INCLUDING MATERIALS OF CONSTRUCTION REQUIRED PER SPECIFICATION PARAGRAPH 3.2.1.7 SHALL BE SUBMITTED FOR GOVERNMENT APPROVAL. Approval will be based on technical content and compliance with requirements. THE GOVERNMENT WILL HAVE 10 WORKING DAYS FOR REVIEW. THE CONTRACTOR SHALL HAVE 10 WORKING DAYS TO REVISE (IF REQUIRED) AND RESUBMIT FOR A NEW REVIEW.
BLOCKS 11 & 12: THE CONTRACTOR SHALL PROVIDE pre-fabrication DRAWINGS FOR THE CASK INCLUDING MATERIALS OF CONSTRUCTION REQUIRED PER SPECIFICATION PARAGRAPH 3.2.1.7 prior to the start of fabrication.
BLOCK 14: THE CONTRACTOR SHALL PROVIDE pre-fabrication DRAWINGS FOR THE CASK INCLUDING MATERIALS OF CONSTRUCTION REQUIRED PER SPECIFICATION PARAGRAPH 3.2.1.7 IN ELECTRONIC UNPROTECTED SEACHABLE PDF FORMAT TO THE GOVERNMENT TECHNICAL POINT OF CONTACT (BELOW).
JERRY NAHRING
C/2310.3, PSNS & IMF
jerry.nahring@navy.mil
| PSNS C/2310 |
| 1 |
| 1 |
| 0 |
| TOTAL |
| 1 |
| 1 |
| 0 |
| G. PREPARED BY |
| H. DATE |
| I. APPROVED BY |
| J. DATE |
| Mike Baker |
| 31 October 2019 |
| Marcus Kile |
| 31 October 2019 |
DD Form 1423-1, FEB 2001 previous edition may be used. Page 1 of 2 Pages
DATA ITEM DESCRIPTION
Title: Engineering Drawings
Number: DI-DRPR-80651 Approval Date: 880718 AMSC Number: N4494 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility: N/SEA 55Z3 Applicable Forms: N/A
Distribution Statement A: Approved for public release, distribution is unlimited.
Description/Purpose: The Engineering Drawings are the documentation necessary to satisfy the Government’s requirements of Level 1 (Conceptual and Developmental Design); Level 2 (Production Prototype and Limited Production); and Level 3 (Production), as defined in DOD-D-1000.
Application/Interrelationship: This Data Item Description (DID) contains the format and content preparation instructions for engineering drawings generated by the specific and discrete task requirement as delineated in the contract. The applicable specification containing the technical content for the engineering drawings shall be stated in Block 16 of the DD Form 1423, Contract Data Requirements List.
Preparation Instructions:
1 Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.
2 Technical Content. Technical content shall be in accordance with DD Form 1423, Contract Data Requirements List.
Page 2 of 2 Pages
18. ESTIMATED� TOTAL PRICE
17. PRICE GROUP
Original
File details come from the government source that posted it. Updated .