N4008524R2564 - Section J Annexes.pdf

Section J – 0200000

Management and Administration

Attachment Number Attachment Title

J-0200000-01 Definitions and Acronyms

J-0200000-02 Wage Determinations

J-0200000-03 Directives, Instructions, and References

J-0200000-04 Invoice Form

J-0200000-05 Forms

J-0200000-06 Government-Furnished Property, Materials, and Services (Not Applicable to this Solicitation)

J-0200000-07 Service Provider Information

J-0200000-08 Asset Information

J-0200000-09 Specification Information (Not Applicable to this Solicitation)

J-0200000-10 Characteristic Meter Readings Information

J-0200000-11 NAVFAC Maximo Data Reporting

J-0200000-12 Installation Spill Prevention, Control, and Countermeasure Plan

J-0200000-13 Contractor Hazardous Material Inventory Log

J-0200000-14 Exhibit Line Item Numbers (ELINs)

J-0200000-15 Contractor Self Performance and Notification of Subcontracting

J-0200000-16 Corporate Experience Form

J-0200000-17 Past Performance Questionnaire

Attachment J-0200000-01

Definitions and Acronyms

Definition Description

Assessment A general term referring to either a survey or inspection of a facility to determine condition.

Asset A general term used to refer to an item, such as a component, system, building or facility, which is managed by an automated data management program.

Competent Person A person who has the professional experience and training necessary to identify existing and predictable hazards at a work or service environment, and who has the authority to take prompt and corrective action to eliminate or remove dangers from the environment.

One who can identify existing and predictable hazards in the working environment or working conditions that are dangerous to personnel and who has authorization to take prompt corrective measures to eliminate them.

Component Inventory

Management Unit

(CIMU)

An organization of like-kind real property into manageable maintenance units. CIMU is a building component, group of components or component assemblies, serving a specific purpose in a facility that can be expected to follow a common and predictable lifecycle behavior. This class of non-equipment will include items such as exterior walls, exterior windows, interior finish, and roofs. This class of equipment will include items such as fan coil units, air handling units, lighting, and water closets. CIMUs can include one or more items of installed equipment typically subject to routine scheduled maintenance.

Confined Work Space A space that is large enough and so configured that a person may bodily enter a space

(such as in tanks, vessels, silos, storage bins, hoppers, vaults, pits, and like spaces where there is limited means of entry) and is hindered or restricted from escaping during an emergency.

Construction Equipment Construction equipment refers to specialized heavy machinery that covers one industry and is specifically designed for executing construction work. Construction equipment requirements shall include a list of equipment establishing the size, quality, number of units, and unit prices. Construction equipment prices provided by the Contractor shall be the lowest price available considering the availability of equipment and the time constraints of the job. The direct equipment price shall be adjusted by all discounts and rebates that accrue to the Contractor.

All indirect cost associated with construction equipment, such as: the Contractor’s hourly composite trade wage, adjusted to allow for workforce productivity; sub-contractor cost, costs for pre-expended bin materials, shipping and handling, union agreements, crew sizes, hand tools, universal equipment (excluding construction equipment), mobilization, demobilization, payroll burdens and fringes, overtime, job

(field) overhead, clerical support, supervision, inspection, fees, taxes, licenses, permits, and insurance, general and administrative (home office) overhead, profit, and all other associated markups shall not be included in the construction equipment price since the cost for these items were included in the labor hour unit price bid. Additionally, time for job preparation, safety standby personnel, and similar indirect labor elements shall not be included.

Contracting Officer (KO) That individual with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings. The term includes certain authorized representatives of the Contracting Officer acting within the limits of their authority as delegated by the Contracting Officer.

Contracting Officer’s

Representative (COR)

The individual appointed by the KO responsible for monitoring the Contractor’s technical compliance and progress, relative to assigned contract(s)/orders(s), based on the contract requirements specified in the PWS and in accordance with the PAP. The

COR performs a variety of contract administration duties that includes oversight of PA, documenting and rating Contractor performance, reviewing invoices, and acceptance of http://en.wikipedia.org/wiki/Vehicle http://en.wikipedia.org/wiki/Construction work. Assignment as a COR is a collateral duty typically performed by the FSCM or

SPAR.

Contractor That entity or its representative responsible for the delivery of the services or materials specified in this contract, as designated by contract award. The term Contractor as used herein refers to both the prime Contractor and any subcontractors. The prime Contractor shall insure that subcontractors comply with the provision of this contract.

Contractor Representative That individual appointed by the Contractor, either orally or in writing, who has been assigned responsibility for executing the requirements of this contract.

Crane, Category 1 Portal cranes, Hammerhead cranes, Locomotive cranes, Derricks, Floating cranes (YD), Tower cranes, Container cranes, Mobile cranes (except those indicated as category 4), including truck, cruiser, crawler, warehouse/industrial cranes, and cranes used for dragline, pile driving, clamshell, magnet, bucket work, and Aircraft crash cranes.

Crane, Category 2 & 3 Cranes with rated capacities of 20,000 pounds or greater are category 2. Examples are

Overhead traveling cranes, Gantry cranes (rail mounted), Wall cranes, Jib cranes, Pillar cranes, Pillar jib cranes, Monorails and associated hoists, Fixed hoists including chain falls. Pedestal mounted commercial boom assemblies (fixed length, telescoping, and articulating types) attached to stake trucks, trailers, flatbeds, or railcars, or stationary mounted to piers, etc., with OEM rated capacities less than 2,000 pounds.

Crane, Category 4 Commercial truck mounted cranes, Truck mounted articulating boom cranes, Pedestal mounted commercial boom assemblies (fixed length, telescoping, and articulating types) attached to stake trucks, trailers, flatbeds, or railcars, or stationary mounted to piers, etc., with OEM rated capacities of 2,000 pounds and greater. Commercial truck mounted cranes and truck mounted articulating boom cranes with OEM capacities of 2,000 pounds and greater require a licensed operator even if the cranes are down rated below

2,000 pounds capacity for administrative purposes.

Direct Material Costs The actual vendor invoice charges for materials used for performance of work under this contract. Direct material costs shall include sales tax and transportation charges when such charges are included on the invoice by the vendor, as well as any discounts allowed for prompt payment and discounts or rebates for core value or salvage value that accrue to the Contractor. When questions arise concerning the cost of direct materials, direct material costs will be based on the lowest of quotes provided by the Contractor from at least three different commercial vendors for the direct material cost. The Government retains the right to obtain additional quotes in questionable situations. The lowest price will be used.

All other cost such as sub-contractor cost, costs for pre-expended bin materials, shipping and handling, union agreements, crew sizes, hand tools, universal equipment, mobilization, demobilization, time for job preparation, safety standby personnel, payroll burdens and fringes, overtime, job (field) overhead, clerical support, supervision, inspection, fees, taxes, licenses, permits, and insurance, general and administrative

(home office) overhead, profit, and all other associated markups shall not be included in the direct material price since the cost for these items are included in the UPL Hour unit price bid.

Electronic Operation And

Maintenance And

Support Information

(eOMSI)

A set of consultant-prepared data and document files that contain detailed, as-built technical information that describes the efficient, economical and safe operation, maintenance and repair of a facility, plant, equipment or system throughout its life cycle.

Generally, it is prepared during construction and submitted upon completion of a new facility or major facility upgrade. eOMSI’s typically include asset information, staffing and budgeting information, supply support including critical spare parts, operating procedures, troubleshooting and diagnostic guides, extended warranty data, maintenance task frequencies and documentation, technical data, repair procedures and manufacturer’s product data. eOMSI data and document files are provided in electronic formats.

Equipment Tangible asset that is functionally complete for its intended purpose, durable, and non-expendable.

Facility A building or structure designed and created to serve a particular function.

Fixed Burden Rate (FBR) The additional costs (expressed in percent of direct material cost) for ordering, handling, and stockpiling materials and repair parts. For example, if the offeror's Fixed Burden

Rate for materials in the Base Period is 10% then:

$100,000.00 + ($100,000.00 x 10%) = $110,000.00

The Government will compensate the Contractor for the required parts and materials and not the total amount shown in Schedule of Indefinite Delivery Indefinite Quantity Work.

Frequency Of Service Annual (A). Services performed once during each 12-month period of the contract at intervals of 335 to 395 days.

Biennial (B). Services performed once during each 24-month period of the contract at internals of 670 to 790 days.

Daily (D5). Services performed once each calendar day, Monday through Friday, including holidays unless otherwise noted.

Daily (D7). Services performed once each calendar day, seven days per week, including weekends and holidays.

Monthly (M). Services performed 12 times during each 12-month period of the contract at intervals of 28 to 31 calendar days.

Quarterly (Q). Services performed four times during each 12-month period of the contract at intervals of 80 to 100 calendar days.

Semiannual (SA). Services performed twice during each 12-month period of the contract at intervals of 160 to 200 calendar days.

Semimonthly (SM). Services performed 24 times during each 12-month period of the contract at intervals of 14 to 16 calendar days.

Three times weekly (3W). Services performed three times a week, such as Monday, Wednesday, and Friday.

Twice weekly (2W). Services performed twice a week, such as Monday and Thursday or Tuesday and Friday.

Weekly (W). Services performed 52 times during each 12-month period of the contract at intervals of six to eight calendar days.

Government Furnished

Property (GFP)

Property in the possession of, or directly acquired by, the Government and subsequently furnished to the contractor for performance of a contract. Government furnished property includes, but is not limited to, spares and property furnished for repairs, maintenance, overhaul, or modification. Government furnished property also includes contractor acquired property if the contractor acquired property is a deliverable under a cost contract when accepted by the Government for continued use under the contract.

Hazardous Material (HM) A material that because of its quality, concentration, physical, chemical or infectious nature may pose a threat to human health or the environment if released or spilled into the environment or any material designated by the Department of Transportation (DOT) or any materials that require a SDS form as posing a potential threat while being transported. Hazardous materials are listed in 49 CFR Part 172.

Hazardous Waste (HW) Any discarded solid waste (liquid, semi-solid, solid, or gaseous) that meets the definition of a hazardous waste by USEPA, state authorities, or the Navy. In accordance with

RCRA, a solid waste is a listed hazardous waste if it is specifically listed, or it is a characteristic hazardous waste if it exhibits the characteristics of ignitability, corrosivity, reactivity, or toxicity.

Hazardous Waste

Management Plan

In accordance with OPNAVINST 5090.1C, every Navy shore activity that generates HW shall develop and use a Hazardous Waste Management Plan or a Hazardous Waste management component in its P2 Plan and EMS. A Hazardous Waste Management Plan shall:

• Identify applicable federal, state, and local regulations pertaining to the generation and management of hazardous waste.

• Identify training requirements and describe procedures for obtaining training and maintaining training records.

• Assign responsibilities for the generation, designation, handling, storage, treatment, disposal, and all documentation.

• Describe all hazardous waste generation and management procedures.

• Include or reference the hazardous waste minimization plan and goals.

• Include or reference contingency plans and emergency response procedures.

The plan shall be kept up to date to include changes in hazardous waste generation and management procedures, as well as changes in applicable federal, state, and local hazardous waste regulations. The plan shall include or reference minimization procedures sufficient to achieve DOD minimization goals. Tenant activities are covered by the host CO's Hazardous Waste Management Plan.

Hazardous Waste

Manifest

A hazardous waste manifest as defined in 40 CFR 260 is required for the transport of hazardous waste. The installation commanding officer (ICO) or the ICO’s designated representative shall retain signature authority for hazardous waste manifests.

Infrastructure Condition

Assessment Program

(ICAP)

A Navy automated data management program that utilizes historical asset lifecycle data and a structured assessment process to evaluate the condition facilities and their components.

Inspection A rigorous, detailed assessment of the condition of a facility performed to generate a fundable scope and cost estimate for prioritization and funding of maintenance and repair.

Integrated Maintenance

Program (IMP)

IMP is a recurring state-of-the-art, reliability-centered inspection, testing, maintenance and repair program that determines best practices for managing the functions and consequences of failures of facilities equipment and system components. IMP encompasses accepted commercial practices, including reactive, preventive, predictive and proactive maintenance, into one optimal program. The IMP approach gives the

Contractor full responsibility to maintain systems and equipment and perform repairs whenever necessary to ensure equipment and systems are operational and remain in a constant state of readiness. Service orders will not be issued for accomplishment of repairs on systems and equipment maintained under IMP.

Job or Work Order An authorization for work that requires planning and estimating and has an individual line of accounting for financial and performance evaluation.

Life-Cycle Costs A form of economic analysis that considers the total cost of owning, operating, and maintaining a building or system over its useful life.

Less-than-90-day

Accumulation Areas or

Storage Facilities

Temporary HW storage areas where HW may be stored for up to 90 days without a RCRA permit.

Maintenance and Repair The preservation or restoration of a piece of equipment, system, or facility to such condition that it may be effectively used for its designated purposes. Maintenance/repair may be adjustment, overhaul, reprocessing, or replacement of constituent parts or materials that are missing or have deteriorated by action of the elements or usage, or replacement of the entire unit or system if beyond economical repair.

Monthly On-Site Labor

Report

A compilation of all Contractor and subcontractor employee-hours involved in delivering contract services on a Government property.

NAVFAC MAXIMO A specially configured software version of MAXIMO®, a commercially available computerized maintenance management system (CMMS), adopted by NAVFAC for enterprise facility asset data management. The terms “MAXIMO”, “NAVFAC

MAXIMO” or “Government’s MAXIMO” shall be used interchangeably in the document.

Non-RCRA Regulated

Waste

Waste that is not regulated as a hazardous waste under RCRA; however, is waste may be regulated by other federal, state or local regulations including but not limited to TSCA, Clean Air Act, Clean Water Act or other regulations and statues. Examples include

Used Oil, Universal Waste, Oily Water, antifreeze, etc.

Non-RCRA regulated waste (while not meeting the definition of a Hazardous Waste) must be managed according to its applicable regulations and may not be discarded into the general trash.

Non-Regulated Solid

Waste (Debris and

Rubbish)

Waste not associated with an industrial process such as refuse and scraps resulting from preparation, cooking, dispensing, and consumption of food. Non-hazardous construction and demolition wastes such as dimension and non-dimension lumber, plywood, chipboard, and hardboard are included.

Partnering The terms “partnering”, and “partnership” used herein shall mean a relationship of open communication and close cooperation that involves both Government and Contractor personnel working together for the purpose of establishing a mutually beneficial, proactive, cooperative environment within which to achieve contract objectives and resolve issues and implementing actions as required.

Performance Assessment A method used by the Government to provide some measure of control over the quality of purchased goods and services received.

Performance Assessment

Representative (PAR)

The individual(s) assigned as a Technical Point of Contact (TPOC) / Subject Matter

Expert (SME) to the COR to perform duties as the on-site representative who assesses

Contractor performance. The PAR periodically observes Contractor performance, reviews delivered services, reviews quality management corrective actions, periodically assesses and documents Contractor performance on PAWs and the MPAS, and communicates findings as necessary with the Contractor, SPAR, and COR.

Pre-Expended Bin

Materials And Supplies

The minor materials and supplies that are incidental to the job, for which the total direct cost of any one material line item shown on the material estimate is $10.00 or less.

Examples of pre-expended bin materials and supplies include, but are not limited to, solder, lead, flux, electrical connectors, electrical tape, fuses, nails, screws, bolts, nuts, washers, spacers, masking tape, sand paper, solvent, cleaners, lubricants, grease, oil, rags, mops, glue, epoxy, spackling compound, joint tape, plumbers tape and compound, clips, welding rods, and touch up paint.

Property Administrator An authorized representative of the Contracting Officer who is responsible for administering contract property requirements, terms and conditions of the contract

Property Management

Program

A Government program established for the purpose of reviewing and approving the

Contractor’s Property Management Plan and System through performance of a system analysis whenever government property is in the possession of the Contractor.

Quality Assurance (QA) The planned and systematic activities implemented in a quality system so that quality requirements for a product or service will be fulfilled.

Quality Control (QC) The observation techniques and activities used to fulfill requirements for quality.

R. S. Means A data collection and organization system developed by R. S. Means Company which can be used to prepare accurate, dependable construction estimates and budgets in a variety of ways. The Contractor shall use the latest edition. Material prices are based on a national average and computed labor costs are based on a 30-city national average.

An estimate prepared using this data is called a "Means estimate"; data may simply be referred to as "Means".

Real Property Land and improvements to land (i.e., facilities). It includes equipment affixed and built into the facility as an integral part of the facility (such as heating systems), but not movable equipment (e.g., plant equipment, industrial equipment, buoys).

Real Property Inventory

Equipment (RPIE)

A Government owned or leased individual pieces of equipment, apparatus, or fixture that are essential to the function of the real property (i.e. plumbing, electrical, heating, cooling and elevators). It is physically attached to, integrated into, and built in or on the property.

Individual RPIE’s can be combined to make a CIMU to facilitate facilities management.

An individual RPIE can also be a CIMU if the equipment is complex enough to require its own management planning.

Regulated Waste Any hazardous, non-hazardous, industrial process waste (aka special waste), e-waste, and/or off-specification HM, which because of its physical characteristics, chemical make-up or biological nature requires either special handling procedures and permitting, or poses an unusual threat to human health, equipment, property, or the environment.

Examples include (but are not limited to) liquid sludge, pastes, and/or filter cakes, chemical compounds and/or petroleum products, fine powders or highly dusty materials, spent blast media and/or grit, demolition wastes from industrial facilities, debris and/or residues from spill cleanup work, underground storage tank remediation materials, pollution control wastes, ash from fires, furnaces, boilers or incinerators, off-specification products, other materials that have the potential to be a hazardous waste.

All RW may be used or unused excess hazardous materials. Laboratory analysis may be required to verify the waste is not a RCRA-regulated hazardous waste.

Response Time The time allowed the Contractor after initial notification of a work requirement to be physically on the premises at the work site with appropriate personnel, tools, equipment, and materials, ready to perform the work required.

Restoration Restoration of real property to such a condition that it can be used for its intended purpose. Includes repair or replacement work to restore facilities damaged by inadequate sustainment, excessive age, natural disaster, fire, accident or other causes.

Sampling Plan Plan and procedures to conduct sampling, field testing and laboratory analysis for a defined testing objective.

Satellite Accumulation

Areas

Designated approved areas, at or near the point of generation and under the control of the operator generating the waste, where no more than 55 gallons (cumulative total) of all types of HW or 1 quart of acutely HW may be accumulated. The 55-gallon limit does not include non RCRA regulated waste, universal waste and used oil etc.

Spill Prevention Control and Countermeasure

(SPCC) Plan

The SPCC Plan establishes engineering controls including procedures, methods, equipment and other requirements to prevent the discharge of oil into or upon navigable waters. The Plan includes procedures for oil spill prevention, measures to contain spills and an established spill drill exercises to ensure effective countermeasures in the event of oil spill.

Sustainment Maintenance and repair activities necessary to keep a typical inventory of facilities in

“normal working condition”. Sustainment includes regularly scheduled maintenance as well as cyclical major repairs or replacement of components that occur periodically over the expected service life of the facilities.

System An assemblage of mechanically and/or electrically interlocked parts, equipment and/or components forming a unitary whole.

Unit Priced Labor (UPL)

Hour

The fully burdened unit price bid by the Contractor to perform one hour of work-in-place. With the exception of direct material and construction equipment costs, the unit priced labor hour price shall include all indirect and direct costs associated with performing work, such as: the Contractor’s hourly composite trade wage, adjusted to allow for workforce productivity; sub-contractor cost, costs for pre-expended bin materials, shipping and handling, wage determinations, union agreements, crew sizes, hand tools, equipment, universal equipment (excluding construction equipment), mobilization, demobilization, payroll burdens and fringes, overtime, job (field) overhead, clerical support, supervision, inspection, fees, taxes, licenses, permits, and insurance, general and administrative (home office) overhead, profit, and all other associated markups. Any indirect cost or additional markups not allowed in the definition of direct materials shall be included in the UPL price. Additionally, time for job preparation, safety standby personnel, and similar indirect labor elements are included.

Uniformat Classification A standard classification of building components established by the National Institute of

Standards and Technology.

Universal Equipment Universal equipment refers to equipment that can cover two or more industries and is commercially employed in execution of operation, maintenance, and repair work, such as: Aerial Work Platforms, Backhoes, Cranes, Dump Trucks, Excavators, Generators, Graders, Lifts, Loaders, Man Lifts, Monitoring and Test Equipment, Pumps, Tractors, Trailers, etc.

Universal Waste (UW) Universal Waste (UW) (defined in 40 CFR Part 273) means batteries, fluorescent lamps, some pesticides, and mercury-containing equipment formally classified as a HW, but that are now subject to less stringent regulations, when recycled if recycling is available.

Utility Infrastructure

Condition Assessment

Program (UICAP)

A comprehensive assessment processes for planning, managing, and executing Navy utility infrastructure inspections.

Acronym Title

ACO Administrative Contracting Officer

AFFF Aqueous Film Forming Foam

BFR Basic Facility Requirements

BW Biweekly

CBMM Condition Based Maintenance Management Program

CDR Contract Discrepancy Report

CIA Controlled Industrial Area

CIMU Component Inventory Management Unit

CMMS Computerized Maintenance Management System

CNSSI Committee on National Security Systems Instruction

COR Contracting Officer Representative

COR Condition of Readiness

DBH Diameter at Breast Height

DCR Direct Condition Rating

DoD Department of Defense

DoDI Department of Defense Instruction

DoN Department of Navy

DRMO Defense Reutilization Management Office

EPA Environmental Protection Agency

EPCRA Emergency Planning and Community Right-to-Know Act

FAR Federal Acquisition Regulation

FFP Firm Fixed Price

FIFRA Federal Insecticide, Fungicide, and Rodenticide Act

FSC Facility Support Contract

FSCM Facility Support Contract Manager

GIS Geospatial Information System

GFE Government-furnished Equipment

GFF Government-furnished Facilities

GFM Government-furnished Materials

HCA Head Contracting Agency

ICAP Infrastructure Condition Assessment Program

ICP Integrated Contingency Plan

IDIQ Indefinite Delivery Indefinite Quantity iNFADS Internet Navy Facilities Asst Data Store

IPM Integrated Pest Management

IPMIS Integrated Pest Management Information System

IPMP Integrated Pest Management Plan

KO Contracting Officer

LAN Local Area Network

M Monthly

MAP Maintenance Action Plan

MDI Mission Dependency Index

MEP Mechanical, Electrical and Plumbing

MILCON Military Construction

MPAS Monthly Performance Assessment Summary

MRI Mission Readiness Index

MSDS Material Safety Data Sheets

NAVFAC Naval Facilities Engineering Command

NIST National Institute of Standards and Technology

NIST SP National Institute of Standards and Technology Special Publication

NMCI Navy Marine Corps Intranet

Acronym Title

NOSC Navy-On-Scene Coordinator

PAP Performance Assessment Plan

PAR Performance Assessment Representative

PAW Performance Assessment Worksheet

PEO Program Executive Officer

PM Project Manager

PM Planned Maintenance or Preventative Maintenance

POAM Plan of Action and Milestones

PRCSP Permit Required Confined Space Program

PWS Performance Work Statement

PWO Public Works Officer

Q Quarterly

QC Quality Control

RSIP Regional Shore Infrastructure Plan

RPIE Real Property Inventory Equipment

RSL Remaining Service Life

SC Security Clearances

SM Semimonthly

SPAR Senior Performance Assessment Representative

TE Technical Exhibit

VIQ Variation in Quantity

WBS Work Breakdown Structure

Attachment J-0200000-03

Directives, Instructions, and References

Reference Title

CNSSI 1253 Security Categorization and Control Selection for National Security Systems

DoD Directive 5200.2 DoD Personnel Security Program (PSP)

DoDI 8582.01 Security of Unclassified DoD Information on Non-DoD Information Systems

DODD 6055.9 DoD Explosives Safety Management and the DoD Explosives Safety Board

EM 385-1-1 U.S. Army Corps of Engineers Safety and Health Requirements

NAVFACINST 4161.1 Accountability, Tracking, and Management of Government-Furnished Property

NAVFACINST 11010.45 Regional Planning Instruction (Site Approval Process)

NAVFAC P-78 Real Property Inventory Procedures Manual

NIST SP 800-171

Revision 1

Protecting Controlled Unclassified Information in Nonfederal Information Systems and

Organizations

NIST SP 800-53 Security and Privacy Controls for Federal Information Systems and Organizations

OPNAVINST 11000.16 Command Responsibility for Shore Activity Land and Facilities

OPNAVINST 11010.20 Navy Facilities Projects

OPNAVINST 11011.10 Utilization of Navy Real Property

P.L. 91-596 Occupational Safety and Health Act

SECNAVINST 11011.47 Acquisition, Management, and Disposal of Real Property and Real Property Interests by the Department of the Navy

UFC 2-000-5N Facility Planning Criteria for Navy/Marine Corps Shore Installations

UFC 3-560-01 Operation and Maintenance: Electrical Safety

Attachment J-0200000-02

Wage Determinations

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4089

Daniel W. Simms Division of | Revision No.: 27

Director Wage Determinations| Date Of Last Revision: 07/22/2024

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order

14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to |

|after January 30, 2022, or the |the contract. |

|contract is renewed or extended (e.g., |The contractor must pay all covered workers |

|an option is exercised) on or after |at least $17.20 per hour (or the applicable |

|January 30, 2022: |wage rate listed on this wage determination,|

| |if it is higher) for all hours spent |

| |performing on the contract in 2024. |

|If the contract was awarded on or |Executive Order 13658 generally applies to |

|between January 1, 2015 and January 29,|the contract. |

|2022, and the contract is not renewed |The contractor must pay all covered workers |

|or extended on or after January 30, |at least $12.90 per hour (or the applicable |

|2022: |wage rate listed on this wage determination,|

| |if it is higher) for all hours spent |

| |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

This wage determination is applicable to the following cities and towns in

RHODE ISLAND:

BRISTOL COUNTY: Barrington, Bristol, Warren

KENT COUNTY: Coventry, East Greenwich, Warwick, West Greenwich, West Warwick

NEWPORT COUNTY: Jamestown, Little Compton, Middletown, Newport, Portsmouth, Tiverton

PROVIDENCE COUNTY: Cranston, East Providence, Foster, Gloucester, Johnston, North Providence, Scituate

WASHINGTON COUNTY: Charlestown, Exeter, Narragansett, North Kingstown, Richmond, South Kingstown

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 19.01

01012 - Accounting Clerk II 21.33

01013 - Accounting Clerk III 23.86

01020 - Administrative Assistant 36.49

01035 - Court Reporter 27.46

01041 - Customer Service Representative I 16.80***

01042 - Customer Service Representative II 18.33

01043 - Customer Service Representative III 20.57

01051 - Data Entry Operator I 18.20

01052 - Data Entry Operator II 19.86

01060 - Dispatcher, Motor Vehicle 22.67

01070 - Document Preparation Clerk 20.83

01090 - Duplicating Machine Operator 20.83

01111 - General Clerk I 17.62

01112 - General Clerk II 19.22

01113 - General Clerk III 21.57

01120 - Housing Referral Assistant 26.44

01141 - Messenger Courier 18.47

01191 - Order Clerk I 17.69

01192 - Order Clerk II 19.30

01261 - Personnel Assistant (Employment) I 20.04

01262 - Personnel Assistant (Employment) II 22.42

01263 - Personnel Assistant (Employment) III 24.99

01270 - Production Control Clerk 29.28

01290 - Rental Clerk 17.73

01300 - Scheduler, Maintenance 21.20

01311 - Secretary I 21.20

01312 - Secretary II 23.71

01313 - Secretary III 26.44

01320 - Service Order Dispatcher 20.26

01410 - Supply Technician 36.49

01420 - Survey Worker 24.79

01460 - Switchboard Operator/Receptionist 18.11

01531 - Travel Clerk I 18.41

01532 - Travel Clerk II 19.68

01533 - Travel Clerk III 20.57

01611 - Word Processor I 18.68

01612 - Word Processor II 20.96

01613 - Word Processor III 23.45

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 26.87

05010 - Automotive Electrician 21.93

05040 - Automotive Glass Installer 21.06

05070 - Automotive Worker 21.06

05110 - Mobile Equipment Servicer 19.31

05130 - Motor Equipment Metal Mechanic 22.82

05160 - Motor Equipment Metal Worker 21.06

05190 - Motor Vehicle Mechanic 22.82

05220 - Motor Vehicle Mechanic Helper 18.39

05250 - Motor Vehicle Upholstery Worker 20.14

05280 - Motor Vehicle Wrecker 21.06

05310 - Painter, Automotive 21.93

05340 - Radiator Repair Specialist 21.06

05370 - Tire Repairer 17.80

05400 - Transmission Repair Specialist 22.82

07000 - Food Preparation And Service Occupations

07010 - Baker 15.88***

07041 - Cook I 21.17

07042 - Cook II 23.09

07070 - Dishwasher 15.65***

07130 - Food Service Worker 15.27***

07210 - Meat Cutter 21.97

07260 - Waiter/Waitress 15.11***

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 22.72

09040 - Furniture Handler 15.90***

09080 - Furniture Refinisher 22.24

09090 - Furniture Refinisher Helper 18.63

09110 - Furniture Repairer, Minor 20.42

09130 - Upholsterer 22.23

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 16.74***

11060 - Elevator Operator 16.74***

11090 - Gardener 26.03

11122 - Housekeeping Aide 17.33

11150 - Janitor 17.33

11210 - Laborer, Grounds Maintenance 21.15

11240 - Maid or Houseman 16.61***

11260 - Pruner 20.01

11270 - Tractor Operator 24.78

11330 - Trail Maintenance Worker 21.15

11360 - Window Cleaner 18.31

12000 - Health Occupations

12010 - Ambulance Driver 21.57

12011 - Breath Alcohol Technician 29.51

12012 - Certified Occupational Therapist Assistant 29.97

12015 - Certified Physical Therapist Assistant 31.81

12020 - Dental Assistant 23.21

12025 - Dental Hygienist 40.40

12030 - EKG Technician 46.27

12035 - Electroneurodiagnostic Technologist 46.27

12040 - Emergency Medical Technician 21.57

12071 - Licensed Practical Nurse I 26.39

12072 - Licensed Practical Nurse II 29.51

12073 - Licensed Practical Nurse III 32.90

12100 - Medical Assistant 21.00

12130 - Medical Laboratory Technician 33.50

12160 - Medical Record Clerk 22.90

12190 - Medical Record Technician 25.62

12195 - Medical Transcriptionist 21.63

12210 - Nuclear Medicine Technologist 50.54

12221 - Nursing Assistant I 14.51***

12222 - Nursing Assistant II 16.33***

12223 - Nursing Assistant III 17.82

12224 - Nursing Assistant IV 20.00

12235 - Optical Dispenser 27.44

12236 - Optical Technician 20.00

12250 - Pharmacy Technician 18.72

12280 - Phlebotomist 21.94

12305 - Radiologic Technologist 39.44

12311 - Registered Nurse I 30.31

12312 - Registered Nurse II 37.06

12313 - Registered Nurse II, Specialist 37.06

12314 - Registered Nurse III 44.84

12315 - Registered Nurse III, Anesthetist 44.84

12316 - Registered Nurse IV 53.75

12317 - Scheduler (Drug and Alcohol Testing) 36.58

12320 - Substance Abuse Treatment Counselor 25.72

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 25.53

13012 - Exhibits Specialist II 31.63

13013 - Exhibits Specialist III 38.70

13041 - Illustrator I 25.53

13042 - Illustrator II 31.63

13043 - Illustrator III 38.70

13047 - Librarian 35.03

13050 - Library Aide/Clerk 16.66***

13054 - Library Information Technology Systems 31.63

Administrator

13058 - Library Technician 24.64

13061 - Media Specialist I 22.82

13062 - Media Specialist II 25.53

13063 - Media Specialist III 28.47

13071 - Photographer I 22.23

13072 - Photographer II 24.87

13073 - Photographer III 30.81

13074 - Photographer IV 37.69

13075 - Photographer V 45.58

13090 - Technical Order Library Clerk 20.91

13110 - Video Teleconference Technician 25.73

14000 - Information Technology Occupations

14041 - Computer Operator I 21.88

14042 - Computer Operator II 24.46

14043 - Computer Operator III 27.27

14044 - Computer Operator IV 30.32

14045 - Computer Operator V 33.56

14071 - Computer Programmer I (see 1) 25.43

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 21.88

14160 - Personal Computer Support Technician 30.32

14170 - System Support Specialist 33.56

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 35.52

15020 - Aircrew Training Devices Instructor (Rated) 42.98

15030 - Air Crew Training Devices Instructor (Pilot) 51.51

15050 - Computer Based Training Specialist / Instructor 35.52

15060 - Educational Technologist 31.03

15070 - Flight Instructor (Pilot) 51.51

15080 - Graphic Artist 33.41

15085 - Maintenance Test Pilot, Fixed, Jet/Prop 51.51

15086 - Maintenance Test Pilot, Rotary Wing 51.51

15088 - Non-Maintenance Test/Co-Pilot 51.51

15090 - Technical Instructor 29.89

15095 - Technical Instructor/Course Developer 36.56

15110 - Test Proctor 24.12

15120 - Tutor 24.12

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 17.21

16030 - Counter Attendant 17.21

16040 - Dry Cleaner 19.67

16070 - Finisher, Flatwork, Machine 17.21

16090 - Presser, Hand 17.21

16110 - Presser, Machine, Drycleaning 17.21

16130 - Presser, Machine, Shirts 17.21

16160 - Presser, Machine, Wearing Apparel, Laundry 17.21

16190 - Sewing Machine Operator 20.49

16220 - Tailor 21.30

16250 - Washer, Machine 18.03

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 26.12

19040 - Tool And Die Maker 30.40

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 21.58

21030 - Material Coordinator 29.28

21040 - Material Expediter 29.28

21050 - Material Handling Laborer 18.02

21071 - Order Filler 17.68

21080 - Production Line Worker (Food Processing) 21.58

21110 - Shipping Packer 19.64

21130 - Shipping/Receiving Clerk 19.64

21140 - Store Worker I 17.30

21150 - Stock Clerk 20.84

21210 - Tools And Parts Attendant 21.58

21410 - Warehouse Specialist 21.58

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 37.65

23019 - Aircraft Logs and Records Technician 31.54

23021 - Aircraft Mechanic I 36.29

23022 - Aircraft Mechanic II 37.65

23023 - Aircraft Mechanic III 39.10

23040 - Aircraft Mechanic Helper 29.11

23050 - Aircraft, Painter 34.35

23060 - Aircraft Servicer 31.54

23070 - Aircraft Survival Flight Equipment Technician 34.35

23080 - Aircraft Worker 32.97

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 32.97

I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 36.29

II

23110 - Appliance Mechanic 25.99

23120 - Bicycle Repairer 25.80

23125 - Cable Splicer 48.07

23130 - Carpenter, Maintenance 29.35

23140 - Carpet Layer 31.11

23160 - Electrician, Maintenance 32.70

23181 - Electronics Technician Maintenance I 30.09

23182 - Electronics Technician Maintenance II 31.35

23183 - Electronics Technician Maintenance III 32.63

23260 - Fabric Worker 29.77

23290 - Fire Alarm System Mechanic 23.68

23310 - Fire Extinguisher Repairer 28.53

23311 - Fuel Distribution System Mechanic 38.74

23312 - Fuel Distribution System Operator 32.78

23370 - General Maintenance Worker 23.98

23380 - Ground Support Equipment Mechanic 36.29

23381 - Ground Support Equipment Servicer 31.54

23382 - Ground Support Equipment Worker 32.97

23391 - Gunsmith I 28.53

23392 - Gunsmith II 31.11

23393 - Gunsmith III 33.71

23410 - Heating, Ventilation And Air-Conditioning 29.85

Mechanic

23411 - Heating, Ventilation And Air Contidioning 31.00

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 33.06

23440 - Heavy Equipment Operator 33.37

23460 - Instrument Mechanic 33.71

23465 - Laboratory/Shelter Mechanic 32.42

23470 - Laborer 18.02

23510 - Locksmith 32.90

23530 - Machinery Maintenance Mechanic 29.07

23550 - Machinist, Maintenance 27.23

23580 - Maintenance Trades Helper 21.49

23591 - Metrology Technician I 33.71

23592 - Metrology Technician II 35.01

23593 - Metrology Technician III 36.36

23640 - Millwright 33.71

23710 - Office Appliance Repairer 25.62

23760 - Painter, Maintenance 23.12

23790 - Pipefitter, Maintenance 36.19

23810 - Plumber, Maintenance 34.79

23820 - Pneudraulic Systems Mechanic 33.71

23850 - Rigger 31.48

23870 - Scale Mechanic 31.11

23890 - Sheet-Metal Worker, Maintenance 30.15

23910 - Small Engine Mechanic 23.85

23931 - Telecommunications Mechanic I 42.27

23932 - Telecommunications Mechanic II 43.89

23950 - Telephone Lineman 47.73

23960 - Welder, Combination, Maintenance 28.35

23965 - Well Driller 33.71

23970 - Woodcraft Worker 33.71

23980 - Woodworker 28.53

24000 - Personal Needs Occupations

24550 - Case Manager 20.19

24570 - Child Care Attendant 15.68***

24580 - Child Care Center Clerk 19.55

24610 - Chore Aide 17.68

24620 - Family Readiness And Support Services 20.19

Coordinator

24630 - Homemaker 20.19

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 29.69

25040 - Sewage Plant Operator 28.37

25070 - Stationary Engineer 29.69

25190 - Ventilation Equipment Tender 23.92

25210 - Water Treatment Plant Operator 28.37

27000 - Protective Service Occupations

27004 - Alarm Monitor 24.35

27007 - Baggage Inspector 18.45

27008 - Corrections Officer 35.68

27010 - Court Security Officer 32.37

27030 - Detection Dog Handler 20.64

27040 - Detention Officer 35.68

27070 - Firefighter 31.14

27101 - Guard I 18.45

27102 - Guard II 20.64

27131 - Police Officer I 31.38

27132 - Police Officer II 34.89

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 17.89

28042 - Carnival Equipment Repairer 18.79

28043 - Carnival Worker 14.45***

28210 - Gate Attendant/Gate Tender 20.90

28310 - Lifeguard 15.00***

28350 - Park Attendant (Aide) 23.38

28510 - Recreation Aide/Health Facility Attendant 17.07***

28515 - Recreation Specialist 28.97

28630 - Sports Official 18.63

28690 - Swimming Pool Operator 20.49

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 31.72

29020 - Hatch Tender 31.72

29030 - Line Handler 31.72

29041 - Stevedore I 30.34

29042 - Stevedore II 33.04

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 51.07

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 35.22

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 38.79

30021 - Archeological Technician I 22.31

30022 - Archeological Technician II 23.23

30023 - Archeological Technician III 28.79

30030 - Cartographic Technician 28.79

30040 - Civil Engineering Technician 28.67

30051 - Cryogenic Technician I 31.88

30052 - Cryogenic Technician II 35.22

30061 - Drafter/CAD Operator I 22.31

30062 - Drafter/CAD Operator II 23.23

30063 - Drafter/CAD Operator III 25.91

30064 - Drafter/CAD Operator IV 31.88

30081 - Engineering Technician I 20.74

30082 - Engineering Technician II 23.27

30083 - Engineering Technician III 26.03

30084 - Engineering Technician IV 32.25

30085 - Engineering Technician V 39.46

30086 - Engineering Technician VI 47.72

30090 - Environmental Technician 31.49

30095 - Evidence Control Specialist 28.79

30210 - Laboratory Technician 25.09

30221 - Latent Fingerprint Technician I 31.88

30222 - Latent Fingerprint Technician II 35.22

30240 - Mathematical Technician 30.42

30361 - Paralegal/Legal Assistant I 24.62

30362 - Paralegal/Legal Assistant II 30.50

30363 - Paralegal/Legal Assistant III 37.31

30364 - Paralegal/Legal Assistant IV 45.14

30375 - Petroleum Supply Specialist 35.22

30390 - Photo-Optics Technician 28.79

30395 - Radiation Control Technician 35.22

30461 - Technical Writer I 30.14

30462 - Technical Writer II 36.87

30463 - Technical Writer III 44.62

30491 - Unexploded Ordnance (UXO) Technician I 32.46

30492 - Unexploded Ordnance (UXO) Technician II 39.27

30493 - Unexploded Ordnance (UXO) Technician III 47.07

30494 - Unexploded (UXO) Safety Escort 32.46

30495 - Unexploded (UXO) Sweep Personnel 32.46

30501 - Weather Forecaster I 31.88

30502 - Weather Forecaster II 38.78

30620 - Weather Observer, Combined Upper Air Or (see 2) 25.91

Surface Programs

30621 - Weather Observer, Senior (see 2) 28.79

31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 39.27

31020 - Bus Aide 17.25

31030 - Bus Driver 22.15

31043 - Driver Courier 19.50

31260 - Parking and Lot Attendant 16.75***

31290 - Shuttle Bus Driver 17.70

31310 - Taxi Driver 15.90***

31361 - Truckdriver, Light 20.48

31362 - Truckdriver, Medium 21.37

31363 - Truckdriver, Heavy 28.13

31364 - Truckdriver, Tractor-Trailer 28.13

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 19.15

99030 - Cashier 15.00***

99050 - Desk Clerk 16.10***

99095 - Embalmer 30.74

99130 - Flight Follower 32.46

99251 - Laboratory Animal Caretaker I 20.66

99252 - Laboratory Animal Caretaker II 21.69

99260 - Marketing Analyst 35.69

99310 - Mortician 30.74

99410 - Pest Controller 22.00

99510 - Photofinishing Worker 17.06***

99710 - Recycling Laborer 25.26

99711 - Recycling Specialist 29.61

99730 - Refuse Collector 23.66

99810 - Sales Clerk 16.67***

99820 - School Crossing Guard 19.32

99830 - Survey Party Chief 32.19

99831 - Surveying Aide 25.20

99832 - Surveying Technician 31.07

99840 - Vending Machine Attendant 22.61

99841 - Vending Machine Repairer 25.90

99842 - Vending Machine Repairer Helper 22.61

***Workers in this classification may be entitled to a higher minimum wage under

Executive Order 14026 ($17.20 per hour) or 13658 ($12.90 per hour). Please see the

Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands. The minimum wage requirements of Executive Order 14026 also are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal

Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $5.36 per hour, up to 40 hours per week, or $214.40 per week or

$929.07 per month

HEALTH & WELFARE EO 13706: $4.93 per hour, up to 40 hours per week, or $197.20 per week, or $854.53 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal

Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 10 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of twelve paid holidays per year: New Year's Day, Martin

Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination…