ATT 5-NUWC B-990 HVAC Renovation_Bid Schedule and Summary of Work rev 2.pdf

NUWC B-990 HVAC System Renovation eProjects#1621549

DOCUMENT 00 22 13.00 20

SUPPLEMENTARY INSTRUCTIONS TO OFFERORS

PART 1 GENERAL

1.1 CONTRACT LINE ITEMS

The terms Offeror and Bidder and versions thereof (offer/bid) have the same definition as used within this contract.

Provide the Contract Line Item (CLIN) lump sum price for the following items:

CLIN 0001 - BASE PRICE. Price includes the following:

CLIN 0001AA. Price for the entire work for NUWC B-990 HVAV System Renovation and related work in accordance with the drawings and specifications.

CLIN DESCRIPTION TOTAL PRICE FOR CLIN

0001AA

0001AA NUWC B-990 HVAV system Renovation

1.2 GENERAL BID NOTES

a. Award will be made on the lump sum of Contract Line Item 0001AA.

PART 2PRODUCTS

Not used.

PART 3 EXECUTION

Not used.

-- End of Document --

DOCUMENT 00 22 13.00 20 Page 1

NUWC B-990 HVAC System Renovation eProjects#1621549

SECTION 01 11 00

SUMMARY OF WORK

PART 1 GENERAL

1.1 SUBMITTALS

Government approval is required for all submittals, submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:

SD-01 Preconstruction Submittals Salvage Plan

1.2 WORK COVERED BY CONTRACT DOCUMENTS

1.2.1 Project Description

The work includes the renovation of the HVAC system at Bldg. 990, NUWC and incidental related work.

1.2.2 Location

The work is located at B-990, NUWC, approximately as indicated.

1.3 OCCUPANCY OF PREMISES

Building will be unoccupied for 18 months within the overall period of performance of this Contract. Contractor will give the government three months notice when to vacate the building so they may start this 18 month unoccupied period.

Before work is started, arrange with the Contracting Officer a sequence of procedure, means of access, space for storage of materials and equipment, and use of approaches, corridors, and stairways.

1.4 EXISTING WORK

In addition to FAR 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements:

a. Remove or alter existing work in such a manner as to prevent injury or damage to any portions of the existing work which remain.

b. Repair or replace portions of existing work which have been altered during construction operations to match existing or adjoining work, as approved by the Contracting Officer. At the completion of operations, existing work must be in a condition equal to or better than that which existed before new work started.

1.5 LOCATION OF UNDERGROUND UTILITIES

If necessary, obtain digging permits prior to start of excavation, and comply with Installation requirements for locating and marking underground utilities. Contact local utility locating service a minimum of 15 days prior to excavating, to mark utilities, and within sufficient time required if work occurs on a Monday or after a Holiday. Verify existing utility locations indicated on contract drawings, within area of work.

SECTION 01 11 00 Page 1