Attach 1. C_1503030, Rev.pdf

1503030 – Integrated Solid Waste Management Table of Contents

Spec Item Title 1 General Information

1.1 Outline of Services

2 Management and Administration

2.1 Definitions and Acronyms

2.2 Personnel

2.2.1 Certification, Training, and Licensing

2.3 Special Requirements

2.3.1 Weight Tickets (Non-Recyclable)

2.3.2 Permits and Licenses

2.3.3 Payment of Waste Disposal Fees

2.3.4 Records and Reports

2.3.5 Description of CFI

2.4 References and Technical Documents

3 Recurring Work

3.1 Solid Waste Collection

3.1.1 Residential

3.1.1.1 General Household Waste

3.1.1.2 Recyclable Waste

3.1.1.3 Bulky Items

3.1.2 Non-Residential

3.1.2.1 General Waste

3.1.2.2 Recyclable Waste

3.1.2.3 Bulky Waste

3.1.3 Medical Waste (MW) Collection and Transportation

3.1.3.1 Medical Waste (MW) Collection

3.1.3.2 Unscheduled Medical Waste Collection

3.1.3.3 Medical Waste Transportation

3.2 Solid Waste Disposal

3.2.1 Non-Recyclable

3.2.2 Recyclable

3.2.3 Medical Waste

3.3 Vehicles and Equipment

3.4 Solid Waste Containers

3.4.1 Refuse

3.4.2 Government-Owned Solid Waste Storage Containers

3.4.3 Medical Waste Containers

3.5 Compactors and Containers

3.6 Relocate Incinerated Ash Container

4 Non-Recurring Work

1503030 - Integrated Solid Waste Management Spec Item Title Description 1 General Information

1.1 Outline of Services The intent of 1503030 Integrated Solid Waste Management is to specify the requirements related to the collection and disposal of solid waste and recyclable materials.

The following services are not included in this Template:

Waste removal from inside buildings and service locations to waste collection points. This is under a separate contract.

ISWM services do not include any repair work of facilities or fixtures. This is under a separate contract.

2 Management and

Administration

2.1 Definitions and

Acronyms

Definitions and Acronyms are listed in J-1503030-01.

2.2 Personnel The Contractor shall provide personnel with the qualifications, technical knowledge, experience and skills required for efficient operations within the Integrated Solid Waste Management function.

2.2.1 Certification, Training, and Licensing

Personnel operating vehicles for collection and transportation of ISWM shall be licensed IAW Japanese Road Traffic Laws and regulations.

The Contractor shall submit proof of all certification, training, and licensing requirements per Section F.

2.3 Special Requirements

2.3.1 Weight Tickets

(Non-Recyclable) The Contractor shall weigh all industrial waste collected, and submit a ticket that certifies the actual weight (metric tons) measured to the KO and COR. No tare weight (weight of truck and containers) shall be included in a certificate. Weight measurements shall be made at Bldg. 1844 or a designated truck scale approved by the Government of Japan. The Contractor shall pay all weight measurement fees. Individual weight tickets denoting the date, vehicle number, and tonnage disposed shall be submitted with the Contractor's monthly invoice. The Contractor shall also provide the total tabulated tonnage disposed during the month per Section F.

Issuance of Manifest:

Industrial waste leaving the U.S. Government premises shall be accompanied by a manifest that will be signed by the KO or the Government's authorized personnel designated by the KO as Waste Generator. Blank forms of manifest shall be furnished by the Contractor.

The Contractor shall submit and maintain all manifest copies of industrial waste generated, transported and disposed of, Off-Base under this contract in accordance with Japanese laws.

Completion of Transport: The Contractor shall provide to the KO and COR, written documentation certifying that the industrial waste was properly delivered to an approved disposal Off-Base facility per section F.

Completion of Disposal: The Contractor shall provide the KO and COR, written documentation including a description and certification of how the industrial waste was disposed per section F.

2.3.2 Permits and Licenses The Contractor shall be licensed by the appropriate local city or prefectural authorities. Japanese Waste Law prohibits a generator of industrial waste from contracting with a licensed transporter and requiring the transporter to subcontract with a disposal facility; therefore, the Contractor shall be licensed to transport industrial waste and to dispose of industrial waste required under this contract in its own name. All industrial solid waste leaving the U.S. Government premises to a Japanese facility shall be accompanied by a serialized numbered manifest to ensure a complete audit trail from point of origin to ultimate disposal. The Contractor shall perform the work required by this contract as the Prime Contractor.

The Contractor shall possess all required permits, licenses, and authorizations to perform work under this contract and comply with all the applicable national, prefectural and local laws and regulations. Provide evidence of such permits and licenses to the KO and COR per Section F.

The name of the company specified on the following official business licenses for the requirement to be held by the prime Contractor shall be the same as the name of the prime Contractor, the same shall apply to the JV.

If it is not a same specified company name, shall be not deemed responsive and will be not eligible.

Waste Business License: License for collection and disposal work required by Government of Japan (GOJ), and the Law Concerning Waste Disposal and Public Cleanliness. The waste business licenses consist of three types:

1) Collection/Transportation License for collection work.

2) Final Disposal or Intermediate Processing License for disposal work.

3) Transfer/Temporary Storage License for loading and unloading work on the way to collection, and temporary waste custody.

The Contractor shall not subcontract work for the collection and disposal services under this contract, except for emergency cases such as shutdown of a disposal facility. If such an emergency arises, the Contractor shall submit a request in accordance with "The Law Concerning Waste Disposal and Public Cleanliness, GOJ to the KO immediately for approval.

General Waste: The Contractor shall possess a valid license issued by Yokosuka City for collection and transportation of Ordinary General Waste (OGW) as the Prime Contractor under this contract.

Industrial Waste: The Contractor shall possess valid licenses/permits of applicable Ordinary Industrial Waste (OIW) issued by the local, prefectural or national Japanese governing authority for collection/transportation and disposal of industrial waste under this contract. The Contractor shall possess licenses of intermediate processing and temporary storage depending on his waste treatment process. Licenses issued by Yokosuka city and/or Kanagawa prefecture, cities or prefectures that disposal facilities are located in, are required for collection, intermediate processing, disposal, and/or temporary storage.

1) Waste Glass and Pottery, (Ordinary Industrial Waste, OIW)

2) Waste Plastic, OIW

3) Waste Metal, OIW

4) Waste Wood, OIW

Medical Waste (MW): The Contractor shall possess licenses of infectious and non-infectious MW (Kansen-sei Iryou Haikibustu) collection, transportation and disposal licenses, in order to provide MW collection and transportation at CFAY and NAF Atsugi in Kanagawa prefecture, at USMC Camp Fuji in Shizuoka prefecture and The NEW SANNO HOTEL in Tokyo capital city for disposal service in Japan. The Contractor shall obtain all required permits, licenses, and authorizations to perform work under this contract and comply with the Waste Disposal and Public Cleansing Act (Haiki-butsu no Shori Oyobi Seisou ni Kansuru Houritsu), Ryuji.Matsumoto.JA Line

JEGS, and all other applicable host nation (Japanese), prefectural, and local laws, regulations, and standards.

The Contractor shall possess all required licenses in its own name. Only for disposal of amalgam waste, the Contractor may utilize and submit a subcontractor's license. In this case, the Contractor shall obtain an acceptance of subcontracting (SAI-ITAKU) from the USNH.

2.3.3 Payment of Wastes

Disposal Fees

The Contractor shall be responsible for all fees associated with the disposal of general waste, industrial waste and medical waste. Proof of payment shall be submitted per Section F from approved waste disposal facilities.

2.3.4 Records and Reports Monthly Tonnage Report:

The Contractor shall prepare and submit a monthly CFAY Solid Waste Tonnage Report to the KO and COR per Section F. The monthly tonnage report shall have daily quantities of solid wastes collected and disposed of during the month and separately listed by waste category.

Annually Tonnage Report (General Waste Only):

The Contractor shall prepare and submit an annual tonnage report to the KO and COR per Section F. The annual tonnage report shall have monthly quantities of general waste transported and disposed of during the year and separately listed by waste category.

The tonnage Report is provided in J-0200000-04.

MW Monthly Reports:

The Contractor shall prepare and submit a monthly MW report to the KO and COR per section F. The monthly MW report shall include the following:

Description of completed previous month work Summary of monthly infectious and non-infectious medical waste collection Copy of disposal tickets (manifest)

2.3.5 Description of CFI The Contractor shall furnish following material:

Bag, Plastic 19-1/2 x 38-1/2 x 14-1/2 inches, for lining of 50 Gallon

Containers.

Medical Waste Containers, descripted J-1503030-01.

The Contractor shall record quantities used for above item per month and submit report per section F, unless direction by COR.

2.4 References and

Technical Documents

References and Technical Documents are listed in J-1503030-02.

Spec Item

Title Performance Objective

Related Information Performance Standard

3 Recurring Work

The Contractor shall provide refuse collection, disposal and recycling services to ensure refuse and recyclables are properly collected and disposed.

Service Level Standards are defined by Commander, Navy Installations Command (CNIC) for Navy Shore Commands.

Service Level Standards for Integrated Solid Waste Management are specified as shown in J-1503050-03.

Refuse and recyclables are properly collected and disposed consistent with the Service Level Standards listed in J- 1503030-03.

Pickups are scheduled at the minimum number that will prevent waste container overflow.

Recycling is performed to reduce solid waste volume.

3.1 Solid Waste

Collection

The Contractor shall provide collection of residential, commercial, and industrial solid wastes to ensure refuse and recyclables are properly collected.

The Contractor shall develop and submit a schedule that has been optimized for solid waste collection per Section F.

The Contractor shall submit changes to the solid waste collection schedule in writing to the KO for acceptance.

If the scheduled collection day falls on an observed holiday, pickup shall be on the following work day. The Contractor shall collect solid waste during periods of inclement weather.

Exceptions to this may be authorized by the KO. When exceptions are granted, the Contractor shall accomplish all collections for each day missed in order to make up all missed collections within 24 hours after the severe weather has terminated. If all make-up collections cannot be made in 24 hours, the Contractor shall submit a revised schedule to the KO and COR for approval.

Rescheduling to provide make-up collections shall not be a basis for a claim by the Contractor for additional compensation.

Residential, commercial, and industrial solid wastes are collected per the Contractor’s schedule.

Waste collection areas are free of waste following collection operations.

Item

Title Performance Objective

Related Information Performance Standard

The Contractor shall collect and dispose of any spillage.

Descriptions and locations of waste containers are shown in Maps and Locations as provided in J-1503030-05.

Informational Note: The Government has found on previous contracts that solid waste collection at the frequencies listed in the Location and Frequency Historical Data as provided in J- 1503030-06 has maintained services at an acceptable level.

3.1.1 Residential The Contractor shall

remove general household, recyclable, and bulky item waste from waste collection areas to ensure refuse and recyclables are properly collected.

The Contractor shall return each waste container to its original location.

Residential waste is removed from waste collection areas per the Contractor’s schedule.

3.1.1.1 General

Household Waste

The Contractor shall remove general household waste from containers to ensure refuse is properly collected.

Waste containers are shown in Maps and Locations as provided in J-1503030-05.

The Contractor shall dispose of household wastes exhibiting hazardous characteristics properly in accordance with applicable GOJ regulations and requirements. These wastes will not be accepted by the Government (Bldg. 1822 hazardous waste yard) for disposal unless they are proven to be properties of the Government.

General household waste is removed from waste collection areas per the Contractor’s schedule.

Containers are returned to an upright position and lids are secured.

3.1.1.2 Recyclable

Waste

The Contractor shall remove recyclable waste to ensure it is properly collected.

All recyclable waste will be placed curbside by residents in designated containers.

Recyclable Waste shall be collected as per Service Level Standards specified in J- 1503030-03.

Recyclable Waste Collection Points are designated in J- 1503030-05.

Recyclable waste is removed from waste collection areas per the Contractor’s schedule.

Containers are returned to an upright position and lids are secured.

Item

Title Performance Objective

Related Information Performance Standard

3.1.1.3 Bulky Items The Contractor shall

remove bulky items to ensure they are properly collected.

Bulky items include large items of refuse including, but not limited to: appliances, furniture, auto parts, tires, tree branches and stumps, which cannot be handled by normal solid waste processing, collection and disposal methods, and debris and other boxed or bagged waste placed outside of a container but in a waste deposit area.

Size and Weight Limitation:

Bulky waste items less than 3 cubic meters (CM) in volume, and less than 100 kilogram (kg) in weight.

Any large item(s) that exceeds either the size or weight limitations is not considered bulky waste and is not covered under the recurring work portion of this contract. The Contractor shall notify the KO and COR when items are out of scope per Section F. The Government may order non-recurring work to remove these items.

The Contractor shall collect and transportation home appliance from CFAY family housing areas IAW GOJ law to include home appliance disposal ticket fee. The Contractor shall provide collection and transportation services to prevent overflow of the collected home appliance from the storage area in YSK Bldg.

1828 at least once per month, unless otherwise specified by the

COR.

Historical estimated quantities for Family Housing home appliances is listed below:

Television - 120 EA.

Air conditioner - 12 EA.

Refrigerator - 26 EA.

Bulky items are removed from waste collection areas and waste deposit areas per the Contractor’s schedule.

Notification to the KO and COR made within 24 hours of discovery of any large item(s) that exceeds either the size or weight limitations of bulky items.

Item

Title Performance Objective

Related Information Performance Standard

Washing machine/Clothes dryer - 12 EA.

Total quantities of all home appliance waste historical data for the last three years is estimated at about 170 EA annually.

3.1.2 Non-

Residential

The Contractor shall remove non-residential waste from containers to ensure refuse and recyclables are properly collected.

The Contractor shall return each waste container to its original location.

The Contractor shall separate dirty waste such as food containers made of plastic, steel and glass/pottery with clinging food residue from the solid waste. Colored plastic bags may be included in this category.

Non-residential waste is removed from waste collection areas per the Contractor’s

3.1.2.1 General Waste The Contractor shall

remove general waste from containers to ensure refuse is properly collected.

Waste containers are shown in Maps and Locations as provided in J-1503030-05.

General waste is removed from waste collection areas per the Contractor’s schedule.

Containers are returned to an upright position and lids are secured.

3.1.2.2 Recyclable

Waste

The Contractor shall remove recyclable waste from containers to ensure it is properly collected.

All recyclable waste will be placed in designated containers that are segregated by the type of recyclable waste, including paper, plastics, glass, metals, clean cardboard and PET.

Recyclable Waste shall be collected as per Service Level Standards specified in J- 1503030-03.

Recyclable Waste Collection Points are designated in J- 1503030-05.

Recyclable waste is removed from waste collection areas per the Contractor’s schedule.

Containers are returned to an upright position and lids are secured.

3.1.2.3 Bulky Waste The Contractor shall

remove bulky waste to ensure it is properly collected.

Bulky waste includes all refuse too large or heavy to be placed in designated containers but is within a waste deposit area.

Bulky waste is removed from waste collection areas per the Contractor’s schedule.

3.1.3 Medical Waste

(MW)

The Contractor shall collect and transport

The Contractor shall develop and submit a schedule that has

MW storage area is free of waste

Item

Title Performance Objective

Related Information Performance Standard

Collection and Transportation infectious and non-infectious MW to ensure it is properly collected and transported, and complies with all applicable local, Japanese, prefectural, laws and regulations.

been optimized for MW collection per Section F.

The Contractor shall submit changes to the MW collection schedule in writing to the KO for acceptance.

If the scheduled collection day falls on an observed holiday, pickup shall be on the following work day.

The Contractor shall collect and dispose of any spillage.

Descriptions and locations of MW containers are shown in Maps and Locations as provided in J-1503030-05.

Informational Note: The Government USNH has found on previous contracts that solid waste collection at the frequencies listed in the location and frequency historical data as provided in J-1503030-06 has maintained services at an acceptable level.

Informational Note: The Government will properly segregate infectious waste (Sharps waste, Body Fluids, and Pathology Waste) and non-infectious MW in accordance with USNH Hazardous Material and Waste Management Plan.

The Government will dispose infectious MW into Contractor provided containers and dispose non-infectious waste into the Government provided blue bags, and store them at the Government MW disposal storage until the scheduled collection.

following collection operations.

All spills immediately cleaned and areas restored to safe and sanitary conditions.

Manifests properly filled out and endorsed prior to departure and returned to waste generator.

3.1.3.1 Medical Waste

(MW)

Collection

The Contractor shall remove infectious and non-infectious MW to ensure it is properly collected.

The Contractor shall collect MW from the designated storage locations. Location maps are provided in J-1503030-05.

MW is removed from waste collection areas per the Contractor’s

Item

Title Performance Objective

Related Information Performance Standard

3.1.3.2 Un-scheduled

Medical Waste Collection

The Contractor shall provide infectious and non-infectious MW un-scheduled collection services to ensure it is properly collected.

The Contractor shall collect MW from the designated storage locations. Location maps are provided in J-1503030-05.

The Contractor shall collect all MW from designated waste storage locations within two calendar days after the Government’s request.

Historically there has been two unscheduled MW collections per year.

MW are removed from designated waste storage locations within the specified timeframe.

3.1.3.3 Medical Waste

Transportation

The Contractor shall transport MW from Government facilities to an approved off-base disposal facility to ensure compliance with all applicable local, Japanese, prefectural, laws and regulations.

The Contractor shall comply with JEGS Chapter 8, Japanese law (Haiki-hou), related local regulations, Infectious Waste Processing Manual (Kansensei Haikibustu Syori Manual), and other applicable requirements.

The transport driver shall keep the signed manifest during transportation.

The Contractor shall immediately collect and clean up all spillage, and conform to the transportation plan should an emergency situation occur in route to the disposal facility.

MW transported properly per the Contractor’s schedule.

MW transport services are performed and complies with all applicable local, Japanese, prefectural, laws and regulations.

Accumulated amalgam transportation complies with all applicable local, Japanese, prefectural, laws and regulations.

3.2 Solid Waste

Disposal

The Contractor shall dispose of residential, commercial, and industrial solid waste to ensure compliance with all applicable local, state, and federal laws and regulations.

All fees associated with disposal shall be paid by the Contractor.

Open burning is prohibited and is not an authorized means of solid waste disposal.

The Contractor shall collect and dispose of any spillage.

Solid waste disposal segregation work descriptions are provided in J-1503030-07.

Solid waste disposal complies with all applicable local, state, and federal laws and regulations.

3.2.1 Non-

Recyclable

The Contractor shall dispose of non-recyclable solid waste to ensure compliance with all applicable local, state, and

Prior to disposal, all solid wastes shall be sorted to remove recyclable materials.

Solid waste disposal complies with all applicable local, state, and federal laws and regulations.

Item

Title Performance Objective

Related Information Performance Standard federal laws and regulations.

3.2.2 Recyclable The Contractor shall

recycle solid waste to ensure compliance with the installation’s waste reduction policy.

The Contractor shall process recyclables as per Services Level Standards specified in J- 1503030-03.

The Contractor shall perform recycle/disposal of recoverable resources to comply with all applicable local, prefectural, and Japanese laws and regulations.

The Contractor shall transport and recycle recoverable resources outside of U.S.

Government controlled areas, within seven calendar days, to an approved facility in accordance with local, prefectural, and national Japanese laws and regulations, unless directed by KO. Specific recycle/disposal requirements of recoverable resources is as follows:

Aluminum/Steel Cans and

Cardboard: QRP will have the option of accepting the aluminum/steel beverage cans and cardboard segregated by the Contractor. The QRP will collect aluminum/steel cans and cardboard at the Material Recovery Facility (Bldg.

5004) accordingly. If QRP rejects or does not collect such cans or cardboard, the Contractor shall recycle such recoverable resources at an approved off-base facility.

Weekly, on the same day each week, weigh metals at the Truck Scale, Bldg. 1844.

Complete Material Requirements/Issue document

(MRI), NAVFAC 9-11014/8

and obtain acknowledgement from the KO, submit MRI to the KO who will issue a turn-in document to the Contractor.

(The form will be given to the Contractor at the pre-

Solid waste is recycled in accordance with installation policy.

Item

Title Performance Objective

Related Information Performance Standard performance conference after the award).

Transport segregated metals with the CFAY Solid Waste Disposal Summary (appropriate turn-in document) to QRP at Bldg. 1822 and transfer the custody of the metals to QRP. See Contractor Solid Waste Tonnage Report form J- 0200000-04.

Revenues generated from the sale of recoverable resources, except for recoverable resources of which title is transferred to the QRP, will remain with the Contractor.

3.2.3 Medical Waste

Disposal

The Contractor shall dispose of MW to ensure compliance with all applicable local, Japanese, prefectural, laws and regulations.

The Contractor shall properly dispose infectious and non-infectious MW at an approved off-base disposal facility.

MW disposal complies with all applicable local, Japanese, prefectural, laws and regulations.

3.3 Vehicles and

Equipment

The Contractor shall maintain vehicles and equipment in a manner to ensure a clean appearance, minimal foul odors, and normal working condition.

The Contractor shall not clean vehicles and equipment on Government property.

Vehicles and equipment are clean, have minimal foul odors, and are maintained in normal working condition.

3.4 Solid Waste

Containers

The Contractor shall provide containers suitable for the collection and disposal of solid waste.

The Contractor shall submit recommended changes to the size and location of solid waste containers in writing to the KO for acceptance.

The Contractor's name and phone number shall be prominently displayed on each container.

All doors, lids, hinges, rollers, breaking devices, and other moving parts shall be maintained to keep containers in normal working condition.

Bent, damaged, leaking, rusting, and unsightly containers shall be

All containers are of standard commercial-industrial grade and are clean, have minimal foul odors, and maintained in normal working condition.

Item

Title Performance Objective

Related Information Performance Standard repaired or replaced in a timely manner.

The Contractor shall not clean containers on Government property unless requested by COR or KO.

Containers shall be placed in waste collection areas as shown on the Maps and Locations provided in J-1503030-05.

The Contractor shall submit product data of containers per Section F.

3.4.1 Refuse The Contractor shall

provide containers suitable for the collection and disposal of refuse.

Containers shall be specifically designed for food waste and shall be leak-proof and rust-proof.

The Contractor shall provide containers at the segregation site in performance of segregation work.

All containers are suitable for the collection and disposal of refuse.

Containers do not leak.

3.4.2 Government-

Owned Solid Waste Storage Containers

The Contractor shall clean and maintenance of Government-owned solid waste storage containers to serviceable, sanitary and properly condition.

The Government will furnish serviceable solid waste containers to the Contractor at no cost.

Inventory of Government own containers is provided in J- 1503030-04.

The Contractor shall perform cleaning and maintenance to Government-owned solid waste storage containers to ensure they are serviceable, sanitary and in proper operating condition.

The Contractor shall conduct regular surveillance and inspections of Government-owned solid waste storage containers and compile a report to be submitted monthly to the COR upon request per section F.

The Contractor shall notify NAVFAC PRY35 POC via the COR of unserviceable

Government-owned solid waste storage containers are serviceable, sanitary and in proper operation condition.

Item

Title Performance Objective

Related Information Performance Standard

Government owned solid waste storage containers within two days.

Unserviceable 32 and 50 gallon solid waste storage containers shall be disposed of by the Contractor at no additional cost to the Government outside of Government premises in accordance with applicable Japanese laws and regulations.

The Contractor shall replace unserviceable Government-furnish containers at no additional cost to the Government. Replaced containers shall become Government property at the end of the contract. Historically there has been two solid waste storage containers replaced per year.

3.4.3 Medical Waste

Containers

The Contractor shall provide containers suitable for the collection and disposal of MW.

Medical waste containers shall be meet following:

a) The container shall fit into the Government storage area.

b) The container shall be new and clean.

c) The container shall be rigid having such durability, resistance and strength as to prevent rupture and leaks during ordinary use per JEGS C8.3.6 (a product approved by Japan Industrial Waste Technology Center “Nihon- Sangyo-Haikibutsu Syori Shinko” Center is preferable).

d) The exterior of the container shall be marked with universal biohazard symbol per JEGS C 8.3.7 in Japanese and English.

All containers are of standard commercial-industrial grade and are clean, have minimal foul odors, and maintained in

Item

Title Performance Objective

Related Information Performance Standard

The Contractor shall submit product data of the containers per Section F.

3.5 Compactors

and Containers

The Contractor shall provide compactors and containers suitable for the collection and disposal of solid waste.

The Contractor shall make electrical connections to compactors in accordance with local policy.

The Contractor shall maintain compactors and containers in accordance with the manufacturer’s instructions.

Compactors and containers provided by the Contractor shall be of the capacities specified in Maps and Locations provided in J-1503030-05, and specifically designed to handle commercial and industrial solid waste.

Compactors and containers are suitable for the collection and disposal of solid waste.

Compactors and containers are of standard commercial-industrial grade and in

3.6 Relocate

Incinerated Ash Container

The Contractor shall relocate and move containers of incinerated ash, including fly ash to the sites around Bldg.

1829 to ensure it is properly collected.

The Contractor shall relocate and move containers of incinerated ash, including fly ash properly to locations around Bldg. 1829 as specified in J- 0200000-09 at the Government’s request.

Historically this has been requested at least two times per week.

All containers of incinerated ash properly relocated and moved.

Item

Title Performance Objective Related Information Performance Standard

4 Non-Recurring Work

Non-recurring work may be ordered utilizing DoD FEDMALL in accordance with Section H or on a task order in accordance with the

PROCEDURES FOR

ISSUING ORDERS clause in Section G. The order will specify the exact locations and types of work to be accomplished. The period of performance will be specified in each order.

Refer to non-recurring work ELINs for task listings, descriptions, and related requirements. All periods of performance are measured from issue date of order to acceptance of the work.

Performance standards for non-recurring work will be the same as those in Spec Item 3 where applicable.