Section_J_Part1.pdf

Section J Contract # N40083-14-R-1015

MCRTC Newburgh, NY MCRTC Syracuse, NY MCRTC Brooklyn, NY

MCRTC Red Bank, NJ

SECTION J

DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

TABLE OF CONTENTS

ATTACHMENT

NUMBER

ATTACHMENT

TITLE

J-0200000-01 Definitions & Acronyms J-0200000-02 Wage Determination J-0200000-03 References, Instructions & Directives J-0200000-04 Invoicing Procedures J-0200000-05 Forms J-0200000-06 Exhibit Line Item Numbers

J-1502000-01 Facility Investment Definitions & Acronyms J-1502000-02 Facility Investment References & Technical Documents J-1502000-03 Facility Systems Inventory J-1502000-04 Temperature Settings for HVAC Systems

J-1503010-01 Custodial Service Frequencies J-1503010-02 Custodial Room Inventory J-1503010-03 Custodial Service Floor Plans J-1503010-04 Custodial Service Levels

J-1503020-01 Definitions and Acronyms J-1503020-02 Planned Pesticide Use Sheet J-1503020-03 References and Technical Documents J-1503020-04 Guidance for Contractor Work Plan J-1503020-05 Frequencies for Scheduled Work J-1503020-06 Nuisance Pest Requirements J-1503020-07 Disease Vector or Health Pest Requirements J-1503020-08 Structure Damaging Pest Requirements J-1503020-09 Lawn, Turf and Ornamental Plant Pest Requirements J-1503020-10 Vegetation Management J-1503020-11 Vertebrate Pest Requirements J-1503020-12 Termite Control Specifications J-1503020-13 Pest Management Operations Report

J-1503030-01 Refuse Inventory & Frequencies

J-1503050-01 Grounds Maintenance & Snow Removal Site Maps J-1503050-02 Grounds Acreage Schedule J-1503050-03 Common Output Level Chart

J-1503060-01 Snow Removal Inventory

ATTACHMENT J-0200000-01

DEFINITIONS AND ACRONYMS

Definition Description Competent Person A person who has the professional experience and training necessary to identify existing and predictable hazards at a work or service environment, and who has the authority to take prompt and corrective action to eliminate or remove dangers from the environment.

Contracting Officer

(KO)

That individual with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings. The term includes certain authorized representatives of the Contracting Officer acting within the limits of their authority as delegated by the Contracting Officer.

Contractor That entity or its representative responsible for the delivery of the services or materials specified in this contract, as designated by contract award. The term Contractor as used herein refers to both the prime Contractor and any subcontractors. The prime Contractor shall insure that subcontractors comply with the provision of this contract.

Contractor Representative

That individual appointed by the Contractor, either orally or in writing, who has been assigned responsibility for executing the requirements of this contract.

Direct Material Costs The actual vendor invoice charges for materials used for performance of work under this contract. Direct material costs shall include transportation charges when such charges are included on the invoice by the vendor, as well as any discounts allowed for prompt payment and discounts or rebates for core value or salvage value that accrue to the Contractor. When questions arise concerning the cost of materials, material costs will be based on the lowest of quotes provided by the Contractor from at least three different commercial vendors for the direct material cost. The Government retains the right to obtain additional quotes in questionable situations. The lowest price will be used.

Equipment Tangible asset that is functionally complete for its intended purpose, durable, and non-expendable.

Facility A building or structure designed and created to serve a particular function.

Frequency Of Service Annual (A). Services performed once during each 12-month period of the contract at intervals of 335 to 395 days.

Monthly (M). Services performed 12 times during each 12-month period of the contract at intervals of 28 to 31 calendar days.

Quarterly (Q). Services performed four times during each 12-month period of the contract at intervals of 80 to 100 calendar days.

Semiannual (SA). Services performed twice during each 12-month period of the contract at intervals of 160 to 200 calendar days.

Five times weekly (5W). Services performed Monday thru Friday.

Three times weekly (3W). Services performed three times a week, such as Monday, Wednesday, and Friday.

Twice weekly (2W). Services performed twice a week, such as Monday and Thursday or Tuesday and Friday.

Weekly (W). Services performed 52 times during each 12-month period of the contract at intervals of six to eight calendar days.

Monthly On-Site Labor Report

A compilation of all Contractor and subcontractor employee-hours involved in delivering contract services on a Government property.

Performance Assessment

A method used by the Government to provide some measure of control over the quality of purchased goods and services received.

Property Administrator An authorized representative of the Contracting Officer who is responsible for administering contract property requirements, terms and conditions of the contract

Quality Control (QC) A method used by the Contractor to control the quality of goods and services produced.

Response Time The time allowed the Contractor after initial notification of a work requirement to be physically on the premises at the work site with appropriate personnel, tools, equipment, and materials, ready to perform the work required.

Unit Priced Labor (UPL) Hour

The unit price bid by the Contractor to perform one hour of work-in-place. With the exception of direct material and construction equipment costs, the unit price includes all indirect and direct costs associated with performing work. The price includes the Contractor’s hourly composite trade wage, adjusted to allow for workforce productivity;

costs for pre-expended bin materials, union agreements, crew sizes, hand tools, payroll burdens and fringes, overtime, job (field) overhead (including clerical support, supervision, inspection, fees, taxes, licenses, permits, and insurance), general and administrative (home office) overhead, and profit. Additionally, time for job preparation, safety standby personnel, and similar indirect labor elements are included.

Acronym Title ACO Administrative Contracting Officer BW Biweekly CDR Contract Discrepancy Report COR Condition of Readiness DBH Diameter at Breast Height DoD Department of Defense DoN Department of Navy DRMO Defense Reutilization Management Office EPA Environmental Protection Agency EPCRA Emergency Planning and Community Right-to-Know Act FAR Federal Acquisition Regulation FFP Firm Fixed Price FIFRA Federal Insecticide, Fungicide, and Rodenticide Act FSC Facility Support Contract GFE Government-furnished Equipment GFF Government-furnished Facilities GFM Government-furnished Materials HCA Head Contracting Agency ICP Integrated Contingency Plan IDIQ Indefinite Delivery Indefinite Quantity IPM Integrated Pest Management IPMIS Integrated Pest Management Information System IPMP Integrated Pest Management Plan KO Contracting Officer M Monthly MCRTC Marine Corps Reserve Training Center MSDS Material Safety Data Sheets NAVFAC Naval Facilities Engineering Command NMCI Navy Marine Corps Intranet NOSC Navy-On-Scene Coordinator PM Project Manager PWS Performance Work Statement Q Quarterly QC Quality Control SC Security Clearances SM Semimonthly TE Technical Exhibit VIQ Variation in Quantity WBS Work Breakdown Structure

(Custodial – 1503010) Definition Description Clean Free of dirt, dust, spots, streaks, graffiti, smudges, smears, litter, bugs, debris, liquids, and other foreign residue.

Clean Room A room designed and environmentally controlled to be dust free, humidity and temperature controlled for a specific type of work. Special entrance and work policies must be adhered to when working in these spaces.

Coating Applying a sealing coat (or finish) to a floor, sometimes referred to as waxing.

Coffee Mess An area for beverage preparation either in a designated food preparation area or in the general work area.

Debris Includes, but is not limited to, paper, cans, bottles, large limbs and branches, and other similar items.

Disinfect To cleanse of microorganisms by application of a chemical agent, also sanitize.

Dispenser A dispensing container, machine, etc. which is used to store and release products in single usage portions. Dispensers under this definition include but are not limited to paper towel dispensers, toilet paper dispensers, toilet seat cover dispensers, and soap dispensers.

Dust Free Spaces Areas requiring specific controls on emission of dust particles from cleaning processes or equipment.

Interior Glass Surfaces All glass, plexi-glass, transparent or semi-transparent plastic surfaces within a building.

Including but not limited to: walls, doors, room dividers, display cases, etc.

Restroom A room or facility with sinks, urinals, toilets, showers and other similar fixtures.

Sanitary Free of microorganisms.

Service Class Category that describes frequency of work for each work item.

Sightly Attractive, tasteful, or pleasing to the sight and consistent with its intended purpose.

Space An area to receive janitorial services which may or may not be considered a room by common definition, e.g., definable sections of hallways, stairwells, lobbies, offices, entrances, and elevators.

Waste Containers Trash receptacles, wastebaskets, trashcans, wastepaper baskets, or any container holding trash, paper, or refuse of any type.

Window Any glass opening on the exterior wall of a building or facility. Includes the interior and exterior of the glass, sill, frame; as well as the associated screens and storm windows.

(Integrated Solid Waste Management)– 1503030) Definition Description Ashes The residue from burned wood, coal, coke, and other combustible material.

Container A receptacle designed for holding and transporting various types of solid waste.

CY Cubic Yard Debris Grass cuttings, tree trimmings, leaves, pine straw, limbs, stumps, street sweepings, roofing and construction wastes, and similar waste material.

Foreign Port Origin Garbage

Garbage subject to special treatment and disposal requirements.

Garbage Animal and vegetable waste (and containers thereof) resulting from the handling, preparation, cooking, and consumption of foods. Edible or hog food garbage is that portion of waste food which has been segregated for salvage.

Hazardous Waste A solid waste or combination of solid wastes, which because of its quantity, concentration, or physical, chemical, or infectious characteristics may: (1) cause, or significantly contribute to, an increase in mortality or an increase in serious irreversible, or incapacitating reversible, illness; or (2) pose a substantial present or potential hazard to human health or the environment when improperly treated, stored, transported, disposed of, or otherwise managed.

Open Burning The combustion of solid waste without (a) control of combustion air to maintain adequate temperature for efficient combustion, (b) containment of the combustion reaction in an enclosed device to provide sufficient residence time and mixing for complete combustion, or (c) control of the emission of the combustion products.

Recyclable Waste Waste material which can be transformed into new products in such a manner that the original product may lose its identity.

Refuse All garbage, ashes, debris, rubbish, and other similar waste materials. Not included are explosive and incendiary waste and contaminated waste from medical and radiological processes.

Rubbish A variety of unsalvageable waste materials such as metal, glass, crockery, floor sweepings, paper, wrapping, containers, cartons, and similar articles not used in preparing or dispensing food.

Sanitary Free of microorganisms.

Solid Waste Refuse and other discarded solid materials resulting from commercial, industrial, residential, and community activities. It does not include hazardous wastes, infectious/medical wastes, solids or dissolved materials in domestic sewage, or other significant pollutants in water resources such as silt, dissolved or suspended solids in industrial waste, water effluents, dissolved materials in irrigation return flow, or other common water pollutants.

Spillage Any refuse dislodged from containers and/or solid waste collecting equipment in the course of collection and disposal.

Waste Deposit Area Designated points where solid wastes will be placed for collection by the Contractor. May also be referred to as collection station, collection point, pick-up stations, or collection site.

(Grounds Maintenance - 1503050)

Definition/Acronym Description Aeration Introduction of air into the soil by mechanical means to promote health and growth.

Appearance Where there is a sense impression or outward aspect of an area or thing that is consistent, uniform and neat in and around the surroundings.

ATFP Anti-Terrorism Force Protection Berm A mound or bank of earth typically used as a barrier.

Brow Ditch A drainage ditch with sufficient slope to prevent erosion of adjacent grading.

Bruising of Lawn An injury to grass areas resulting in discolored blades of grass, usually caused by mowing with a dull blade.

De-thatch Removal of unwanted thatch from mowed areas to promote health and growth.

Debris Includes, but is not limited to, paper, cans, bottles, limbs and branches, pine straw and pinecones, leaves, rocks, and other similar items.

Edging Creating a uniform edged cut to promote a neat appearance and prevent ground structures from vegetation encroachment.

Ground Cover A plant which is chosen for the special task of providing a dense low attractive cover that prevents weeds and erosion. Varieties include, but are not limited to Vinca, Hosta, Ivy, Alyssum, Ajuga, and Liriope.

Hedge Shrubs or other plants planted closely together so as to form an unbroken line during trimming.

Improved Area Improved grounds apply to areas within the built-up section of an installation which contains lawns and landscape development parade grounds, drill fields, athletic facilities, cemeteries, golf courses (except roughs), and similar areas, and include the maintenance and care of ornamental and decorative growth, such as shrubs and flowers and other plantings that are appurtenant to and within lawn areas.

Irrigation System A permanent system used for apply water to lawns and plants. The irrigation system includes all pumps, controls, piping and, sprinkler heads. The irrigation system starts at the valve supplying to the system.

Parcel A designated area of land which may be indicated on installation maps or other attachments.

Pruning The selective removal of unwanted growth to restore a plant or tree to its natural symmetry and appearance. Pruning involves selection and judgment, and does not include the practice of cutting off all branches to an even length. This may include re-sculpting, changing the size, or any other form of work that directly affects the look and growth pattern of the plant.

Rut Depressions made in soil or grass by tires of vehicles or heavy equipment.

Shrub A woody perennial plant generally smaller than a tree, usually having many permanent stems branching from or near the ground, and does not have a definite crown shape. Shrubs may be deciduous or evergreen, and in the area covered by this contract, may be very large in height and width.

Sightly Attractive, tasteful, or pleasing to the sight and consistent with its intended purpose.

Thatch A layer of slowly decomposing organic residues situated above the soil surface and constituting the upper stratum of the medium that supports turf grass growth.

Usually associated with warm season grasses.

Trimming Removal of unwanted vegetation around trees, shrubs, flower and shrub beds, cultivated areas, poles, walls, valves, and other similar objects to match the height and appearance of the surrounding grass. Shrub and hedge trimming includes removal of unwanted vegetation to maintain a uniform, and well-shaped appearance, and to prevent interference with pedestrians, vehicle traffic and building encroachment.

Xeriscape A trademark for a method of landscaping that emphasizes water conservation in its use of drought-resistant plants

(Pavement Clearance - 1503060) Definition/Acronym Description Bare Pavement Free of frozen precipitation down to the surface of the pavement. Bare pavement does not mean completely dry and may still have frozen and/or liquid precipitation in the holes, pores, divots, seams and cracks.

Clear Free of debris, as defined below.

DOT U.S. Department of Transportation Debris Includes, but is not limited to, paper, cans, bottles, limbs and branches, pine straw and pinecones, leaves, sand, soil, aggregates, grass, metals, and other similar items.

End of Cleanup Defined as when the Contractor has met all performance objectives.

End of Precipitation The end of the hour during which the Contractor and the KO or designated representative mutually agree the precipitation has ended EPA Environmental Protection Agency Finished Street, Road, or Parking Lot

A paved or improved area in which the following conditions are met:

Clear, Dry Area – The entire area of responsibility is as close as possible to clear and dry. Not more than one inch of snow shall remain on the area, including hard packed snow.

Full Width – Snow is from the full width of the paved and improved area of the streets, roads, or parking lots. The snow is removed to at least the outer edge of the entire area of responsibility, so that the outer edge is exposed, unless otherwise specified.

Obstructions – Where obstructions such as utility poles, sign posts, fire hydrants, and trees exist between or in the midst of the streets, roads or parking area: snow shall be cleared around these objects down to the required finished depth (by hand if necessary) so that streets, roads, or parking areas are blocked with snow.

Foreign Object Debris

(FOD)

Any foreign object external to an aircraft that can cause damage. Examples include nuts, bolts, safety wire, baggage tags, misplaced tools, sand, rocks, asphalt chunks, birds, snakes and, rodents. Any item(s) on a runway that may be picked up by any aircraft and potentially cause damage to any part of the aircraft.

Initiation of Work The Contractor shall initiate work as required to maintain streets, roads, and parking lots within the performance standard for snow removal and sanding.

New Storm Any precipitation occurring after the “End of Precipitation” defined above.

Passage The movement of persons or vehicles across paved surfaces.

Snow (on the ground).

(Taken from FAA AC 150/5200-30C)

A porous, permeable aggregate of ice grains, which can be predominately single crystals or close groupings of several crystals.

Snow Event Any occurrence of frozen precipitation that results in visible accumulation of snow or ice on paved surfaces.

Snow King Person or persons designated by the Government to act as the overall responsible party for all snow and ice operations. The Snow King has no authority to change, alter, or modify the contract.

Twenty-Four (24) Hour Lot

Parking Lots that have to be cleared during designated shift changes or maintained during the course of an intense storm.

ATTACHMENT J-0200000-02

WAGE DETERMINATIONS

ATTACHED

ATTACHMENT J-0200000-03

REFERENCES, INSTRUCTIONS, DIRECTIVES

Reference Title 1502000 – Management & Administration

EM 385-1-1 U.S. Army Corps of Engineers Safety and Health Requirements P.L. 91-596 Occupational Safety and Health Act UFGS 01 35 26 Unified Facilities Guide Specifications

1503050 – Grounds Maintenance ANSI Z133.1 American National Standard of Tree Care Operations-Pruning, Trimming, Repairing, Maintaining, and Removing and Cutting Brush-Safety Requirements.

ANSI A-300 American National Standard of Tree Care Operations-Tree, Shrub and Other

Woody Plant Maintenance-Standard practices, Secretariat-National Arborist Association, Incorporated.

Irrigation Association - Water Management Committee

Turf and Landscape Irrigation Best Management Practices April 2005

NAVFAC P-73 Natural Resources Management Procedural Manual NAVFAC MO-100.1 Natural Resources Land Management NAVFAC MO-100.3 Natural Resources Fish and Wildlife Management NAVFAC MO-100.4 Natural Resources Outdoor Recreation and Cultural Values NAVFAC P-905 Planting and Maintenance of Trees, Shrubs, and Vines NAVFAC P-960 Installation Design, Chapter 1 “Planting Design” https://portal.navfac.navy.mil/portal/page/portal/3A0949534E9132E3E04400144F23AD64

ATTACHMENT J-0200000-04

INVOICING PROCEDURES

ATTACHMENT J-0200000-05

FORMS

Form Title Form Description Remarks CSIR Contractor Significant Incident Report Provided by KO upon request Planned Pesticide Use Sheet Utilized for Tracking and Reporting

Pesticide Usage Reference J-1503020-03 for Electronic

Reporting Procedures Certification of Load Test and Condition Inspection Form

Utilized for routine inspections and applicable certifications

Reference NAVFAC P-307

ATTACHMENT J-0200000-06

EXHIBIT LINE ITEM NUMBERS

ATTACHMENT J-1502000-01

Facility Investment Definitions & Acronyms

Definition Description Crane, Category 1 Portal cranes, Hammerhead cranes, Locomotive cranes, Derricks, Floating cranes (YD), Tower cranes, Container cranes, Mobile cranes (except those indicated as category 4), including truck, cruiser, crawler, warehouse/industrial cranes, and cranes used for dragline, pile driving, clamshell, magnet, bucket work, and Aircraft crash cranes.

Crane, Category 2 & 3 Cranes with rated capacities of 20,000 pounds or greater are category 2.

Examples are Over head traveling cranes, Gantry cranes (rail mounted), Wall cranes, Jib cranes, Pillar cranes, Pillar jib cranes, Monorails and associated hoists, Fixed hoists, including chain falls. Pedestal mounted commercial boom assemblies (fixed length, telescoping, and articulating types) attached to stake trucks, trailers, flatbeds, or railcars, or stationary mounted to piers, etc., with OEM rated capacities less than 2,000 pounds.

Crane, Category 4 Commercial truck mounted cranes, Truck mounted articulating boom cranes, Pedestal mounted commercial boom assemblies (fixed length, telescoping, and articulating types) attached to stake trucks, trailers, flatbeds, or railcars, or stationary mounted to piers, etc., with OEM rated capacities of 2,000 pounds and greater. Commercial truck mounted cranes and truck mounted articulating boom cranes with OEM capacities of 2,000 pounds and greater require a licensed operator even if the cranes are down rated below 2,000 pounds capacity for administrative purposes.

Equipment, Collateral Encompasses built-in and large substantially affixed equipment/property that is normally acquired and installed as part of a facility project.

Equipment, Installed Encompasses building-type equipment, built-in equipment, and large, substantially affixed equipment/property, and is normally acquired and installed as part of a facility project. Installed equipment is normally required to make a facility useful and operable. Removing such equipment would impair the usefulness, safety, or environment of the facility or the facility restoration work required after its removal, is substantial.

Equipment, Personal Property Personal property equipment includes all equipment other than collateral equipment. Such equipment, when acquired and used in a facility or a test apparatus, can be severed and removed aster erection or installation without substantial loss of value or damage thereto or to the premises where installed.

Facilities Life Cycle A facilities life cycle is divided into four stages, requirements (planning and design), acquisition (construction and acceptance), stewardship (operations, maintenance and repair), and disposal.

Facilities Maintenance Management

The planning, prioritizing, organizing, controlling, reporting, evaluating, and adjusting of facilities maintenance operations to support the CNO/NAVFAC facilities policy and objectives and satisfy customers’ facility needs. Defined by the International Facility Management Association as “the practice of coordinating the physical workplace with the people and work of the organization.”

Life-Cycle Costs A form of economic analysis that considers the total cost of owning, operating, and maintaining a building or system over its useful life.

Maintenance, Preventative Maintenance designed to increase the availability of the facilities/equipment by reducing the number of unexpected breakdowns or service interruptions.

It is any planned maintenance activity that improves equipment life and avoid any unplanned maintenance requirements.

Repair Repair is the restoration of facilities or equipment to such a condition that it may be effectively utilized for its designated purposes by overhaul, reconstruction, or replacement of constituent parts or materials which have deteriorated by action of the elements or usage, and which have not been corrected through maintenance. This term also applies to replacement of the entire unit or system if beyond economical repair. The intent of repair is to have the equipment at normal working condition.

Replacement Replacement, as a distinct work element, is confined to a program of planned replacement of a facility or its components. It may be further limited to major components such as air conditioning compressors, furnaces or hot water heaters. Replacement is performed when the equipment has reached the end of its useful life; when it no longer can perform due to degradation of its internal components and repair is no longer cost effective. Included under the replacement would be the major rebuilding of any component, since rebuilding also restores performance.

Restoration Restoration of real property to such a condition that it can be used for its intended purpose. Includes repair or replacement work to restore facilities damaged by inadequate sustainment, excessive age, natural disaster, fire, accident or other causes.

Sustainment Maintenance and repair activities necessary to keep a typical inventory of facilities in “normal working condition”. Sustainment includes regularly scheduled maintenance as well as cyclical major repairs or replacement of components that occur periodically over the expected service life of the facilities.

Service Order Any work required to return a facility, system, equipment or component to normal working condition. Trouble calls are minor facility problem requests or requests for facilities-related work that are too small to be planned and estimated.

Service Order Cycle Count down starts when the customer is notified that the work has been accepted to be accomplished to the time when the work chit is turned in by the craftsmen as complete is one complete cycle period for a service call.

Service Order, Emergency Emergency trouble call is work to prevent immediate danger to personnel and equipment, prevent loss or damage to property, and/or preclude fulfillment of an essential activity operation or training mission.

Service Order, Service Maintenance and repair work that requires a minimal amount of planning or processing and can be accomplished in a short time, but is not of an emergent nature

Weight Handling Equipment, (WHE)

Weight handling equipment consists of cranes (e.g., portal cranes, jib cranes), rigging gear (e.g., slings, shackles), and associated equipment (e.g., portable hoists, dynamometers).

Acronym Title BPVC Boiler and Pressure Vessel Code HVAC Heating, Ventilation, and Air Conditioning RPIE Real Property Inventory Equipment SCADA Supervisory Control And Data Acquisition SRM Sustainment, Restoration and Modernization UFC Unified Facilities Criteria UPV Unfired Pressure Vessel VTE Vertical Transportation Equipment

ATTACHMENT J-1502000-02

Facility Investment References & Technical Documents

Reference Title UFC 3-430-07 Operations and Maintenance: Inspection and Certification of Boilers and

Unfired Pressure Vessels NAVFAC P-307 Management of Weight Handling Equipment UG-2029-ENV Cross-Connection Control and Backflow Prevention Program MO-118 Inspection of Vertical Transportation Equipment OPNAVINST 5090.1 Chapter 6 Management of Ozone Depleting Substances NAVFAC MO-200 Facilities Engineering – Electrical Exterior Facilities UFC 3-600-02 Inspection, Testing and Maintenance of Fire Protection Systems UFC 3-410-01FA Heating, Ventilating, And Air Conditioning UFC 3-230-02 Operation & Maintenance: Water Supply Systems NAVFAC MO-206 Maintenance and Operation of Air Compressor Plants NAVFAC MO-209 Maintenance of Steam, Hot Water & Compressed Air Distribution Systems ASME 17.1 Safety Code for Elevators & Escalators

Reference Link UFC 3-430-07 http://www.wbdg.org/ccb/DOD/UFC/ufc_3_430_07.pdf NAVFAC P-307 https://portal.navfac.navy.mil/portal/page/portal/navfac/navfac_ww_pp/navfac_ncc_pp/ tab66035/tab67623/p307%202009%20%20with%20change%201%20and%202.pdf UG-2029-ENV https://portal.navfac.navy.mil/portal/page/portal/navfac/navfac_ww_pp/navfac_nfesc_pp/ environmental/productsandservices.htm/waterandwastewater/water/ug-2029-envmay1998.pdf

MO-118 http://www.wbdg.org/ccb/NAVFAC/OPER/mo118.pdf

OPNAVINST 5090.1

Chapter 6 http://5090.dandp.com/pdfs/5090-1C%20Chap%206%2010%20October%20Draft.pdf

NAVFAC MO-200 http://armypubs.army.mil/eng/DR_pubs/dr_a/pdf/tm5_684.pdf UFC 3-600-02 http://www.wbdg.org/ccb/DOD/UFC/ARCHIVES/ufc_3_600_02.pdf UFC 3-410-01FA http://www.wbdg.org/ccb/DOD/UFC/ufc_3_410_01fa.pdf UFC 3-230-02 http://www.wbdg.org/ccb/DOD/UFC/ufc_3_230_02.pdf NAVFAC MO-206 http://www.wbdg.org/ccb/NAVFAC/OPER/mo206.pdf NAVFAC MO-209 http://www.wbdg.org/ccb/NAVFAC/OPER/mo209.pdf https://portal.navfac.navy.mil/portal/page/portal/navfac/navfac_ww_pp/navfac_ncc_pp/ https://portal.navfac.navy.mil/portal/page/portal/navfac/navfac_ww_pp/navfac_nfesc_pp/

ATTACHMENT J-1502000-03

Facility Systems Inventory

Equipment Description QTY Facility Equipment Type Manufacturer Model No. Capacity

Crane - Overhead Bridge 2 Newburgh - B300 Crane Spanmaster/Yale 3 Ton Crane - Overhead Monorail (Manual) 3 Newburgh - B302 Crane Chester 3 Ton Crane - Overhead Monorail (Manual) 3 Newburgh - B302 Crane Chester 1 Ton

Crane - Trolley Hoist 1 Newburgh - B302 Crane 1 Ton Crane - Overhead Monorail (Manual) 1 Newburgh - B200 Crane 2 Ton

Crane - Overhead Straddle Hoist 1 Newburgh - B304 Crane 5 Ton Crane (STAK) 2 Newburgh-B204A Crane Stanley Vidmar 1 Ton

Hydraulic Lift (Loading Dock) 2 Newburgh-B204A Dock Lift Crane - Overhead Monorail (Manual) 1 Syracuse - B2 Crane Chester Hoist 10 Ton

Crane - Overhead Bridge 1 Syracuse - B3 Crane EMH (Engineered Material Handler) 25 Ton Hydraulic Lift (Vehicle) 1 Red Bank - Main Vehicle Lift Hydra-lift 27/28/29/31 9K LBS

Weight Handling Equipment (WHE) - Vehicle Lifts - Elevators

FACILITY LOCATION RED BANK

BUILDING NUMBER 271 516 520 706 710 801 807 811 815 921 1 2 3 2 3 44 Main

QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY

FACP 1 Note #1 Note #1 Note #1 Note #1 Note #1 Note #1 Note #1 Note #1 1 1 Note #1 Note #1 1 1 1 1 FACP BATTERY CABINET --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

DACT MODULE --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

MANUAL PULL --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

SMOKE DETECTORS --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

HORNS/STROBES --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

FLOW SWITCH --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

HEAT DETECTORS --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

WET SYSTEM 1 --- --- --- --- --- --- --- --- 1 1 --- --- 1 1 1 1

DRY SYSTEM --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

MASS NOTIFICATION --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

PIV'S --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

RISER --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

ALARM BELL --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

FIRE EXTINGUISHERS 9 5 5 5 5 7 5 5 3 13 20 8 4 4 5 12 18

FIRE SYSTEM (HAZMAT LOCKERS) --- --- --- --- --- --- --- --- --- --- --- --- 2 --- --- 2 1

FIRE PROTECTION INVENTORY

NOTE #1 - These buildings have detection systems only, BROOKLYN SYRACUSE

ATTACHMENT J-1502000-04

Temperature Settings for HVAC Systems

NOTE: *Degrees F. dry bulb

Area Cooling Season* Heating Season* Living & Admin. Areas (Inactive Employment) 78 68

Working Areas (Active Employment) 78 68 Storage Areas 78 40

Computer Areas 70 68 Training Areas 75 68

ATTACHMENT J-1503010-01

Custodial Service Frequencies