N3904026Q4819 Solicitation Amendment 0001 Conformed.pdf

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

Created On:

22 Jun 2026, 13:25 PM Greenwich Mean Time

Section A - Solicitation/Contract Form

Barge Overhaul Services

N3904026Q48190001

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Barge Overhaul services for the YC 1679. To be completed in accordance with Attachment 1 - SOW Barge Work Items and Exhibit A - CDRLS.

0001AA

Work item 110-11-001 / Underwater Hull inspect and repair. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AB

Work item 123-21-001 / Void - clean, inspect and preserve. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AC

Work item 123-21-002 / Miscellaneous Attachment, remove. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AD

Work item 582-11-001 / Mooring and Towing fitting, inspect and repair. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AE

Work item 582-11-002 / Mooring and towing fitting, inspect, repair and test. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AF

Work item 611-11-001 / Cloverleaf tie down fitting, inspect and repair. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AG

Work item 612-11-001 / Stanchion and lifeline, install. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AH

Work item 631-11-001 for PCN: SERV-L053 / Main deck exterior, clean and preserve. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AJ

Work item 631-11-001 for PCN: SERV-L058 / Underwater Hull and freeboard preservation, accomplish. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AK

Work item 633-11-001 / Hull cathodic protection sacrificial anode, replace. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AL

Work item 634-21-001 / Nonskid deck covering, replace. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AM

Work item 992-11-001 / Towing service, provide. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AN

Work item 992-11-002 / Temporary service, provide. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AP

Work item 992-31-001 / Cleaning and pumping , accomplish. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AQ

Work item 997-11-001 / Drydock fleet and undock, accomplish. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

0001AR

Work item 998-41-001 / Hazardous waste produced on naval vessel, control. To be performed in accordance with Attachment 1 - SOW Barge Work Items.

Pricing Arrangement: Firm Fixed Price

1 Job

Barge Overhaul services for the YC 1600. To be completed in accordance with Attachment 2 - SOW Barge Work Items YC1600 and Exhibit B - CDRLS.

0002AA

Work item 110-11-001 / Underwater Hull inspect and repair. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AB

Work item 123-21-001 / Void - clean, inspect and preserve. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600. 1 Job

Pricing Arrangement: Firm Fixed Price

0002AC

Work item 582-11-002 / Mooring and towing fitting, inspect, repair and test. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AD

Work item 612-11-001 / Stanchion and lifeline, install. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AE

Work item 631-11-001 for PCN: SERV-L078 / Main deck exterior, clean and preserve. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AF

Work item 631-11-001 for PCN: SERV-L079 / Underwater Hull and freeboard preservation, accomplish. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC 1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AG

Work item 633-11-001 / Hull cathodic protection sacrificial anode, replace. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AH

Work item 634-21-001 / Nonskid deck covering, replace. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AJ

Work item 992-11-001 / Towing service, provide. To be performed in accordance with Attachment 2 - SOW Barge Work Items

YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AK

Work item 992-11-002 / Temporary service, provide. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AL

Work item 992-31-001 / Cleaning and pumping , accomplish. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AM

Work item 997-11-001 / Drydock fleet and undock, accomplish. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0002AN

Work item 998-41-001 / Hazardous waste produced on naval vessel, control. To be performed in accordance with Attachment 2 - SOW Barge Work Items YC1600.

Pricing Arrangement: Firm Fixed Price

1 Job

0003 See Exhibits: A Contract Data Requirements List - Exhibit A

A001 Data Item 001 - Diver Hull Inspection Report to be completed in accordance with SOW item 110-11-001 paragraph 3.1.1.

Pricing Arrangement: Firm Fixed Price

1 Set

A002 Data Item 002 - Ultrasonic Test (UT) Report to be completed in accordance with SOW item 110-11-001 paragraph 3.2.2, 3.2.2.1 and 3.2.2.2.

Pricing Arrangement: Firm Fixed Price

1 Set

A003 Data Item 003 - Test/Inspection Report to be completed in accordance with SOW item 123-21-001 paragraph 3.1, 3.1.1, 3.3 and 3.3.1.

Pricing Arrangement: Firm Fixed Price

1 Set

A004

Data Item 004 - Test/Inspection Report to be completed in accordance with SOW items:

581-11-001 paragraph 3.1.1 and 3.1.2.

582-11-002 paragraph 3.1.1 and 3.1.2.

Pricing Arrangement: Firm Fixed Price

1 Set

A005 Data Item 005 - Test/Inspection Report to be completed in accordance with SOW item 582-11-002 paragraph 3.3, 3.1.1 and 3.3.2.

Pricing Arrangement: Firm Fixed Price

1 Set

A006 Data Item 006 - Test/Inspection Report to be completed in accordance with SOW item 582-11-002 paragraph 3.3.3 and 3.3.3.1.

Pricing Arrangement: Firm Fixed Price

1 Set

A007 Data Item 007 - Test/Inspection Report to be completed in accordance with SOW item 611-11-001 paragraph 3.1 and 3.1.1.

Pricing Arrangement: Firm Fixed Price

1 Set

A008 Data Item 008 - Government Property (GP) Inventory Report to be completed in accordance with SOW item 992-31-001 paragraph 3.1.4.

Pricing Arrangement: Firm Fixed Price

1 Set

A009 Data Item 009 - Contractor's Personnel Roster to be completed in accordance with SOW item 992-31-001 paragraph 3.3.3. 1 Set

Pricing Arrangement: Firm Fixed Price

A010 Data Item 010 - Vessel Docking and Undocking Plan to be completed in accordance with SOW item 997-11-001 paragraph

3.1. through 3.2.

Pricing Arrangement: Firm Fixed Price

1 Set

A011 Data Item 011 - Test/Inspection Report to be completed in accordance with SOW item 997-11-001 paragraph 3.4 through 3.5.2.1.

Pricing Arrangement: Firm Fixed Price

1 Set

A012 Data Item 012 - Work Completion Certification Certificate to be completed in accordance with SOW item 997-11-001 paragraph 3.8.

Pricing Arrangement: Firm Fixed Price

1 Set

A013 Data Item 013 - Vessel Final Docking Report to be completed in accordance with SOW item 997-11-001 paragraph 3.12.

Pricing Arrangement: Firm Fixed Price

1 Set

A014 Data Item 014 - Uniform Hazardous Waste Manifest to be completed in accordance with SOW item 998-41-001 paragraph 3.1.3.

Pricing Arrangement: Firm Fixed Price

1 Set

A015 Data Item 015 - Hazardous Waste Report to be completed in accordance with SOW item 998-41-001 paragraph 3.7.

Pricing Arrangement: Firm Fixed Price

1 Set

A016 Data Item 016 - Test/Inspection Report to be completed in accordance with SOW item 123-21-001 paragraph 3.1.2, 3.1.2.1,

3.6 and 3.6.1.

Pricing Arrangement: Firm Fixed Price

1 Set

0004 See Exhibits: B Contract Data Requirements List - Exhibit B

B001 Data Item 001 - Diver Hull Inspection Report to be completed in accordance with SOW item 110-11-001 paragraph 3.1.1.

Pricing Arrangement: Firm Fixed Price

1 Set

B002 Data Item 002 - Ultrasonic Test (UT) Report to be completed in accordance with SOW item 110-11-001 paragraph 3.2.2, 3.2.2.1 and 3.2.2.2.

Pricing Arrangement: Firm Fixed Price

1 Set

B003

Data Item 003 - Test/Inspection Report to be completed in accordance with SOW items:

123-21-001-11-001 paragraph 3.1, 3.1.1, 3.3 and 3.3.1.

631-11-001 paragraph 3.1.1 and 3.1.1.1.

631-21-001 paragraph 3.1.1.1.

634-21-001 paragraph 3.1.1 and 3.1.1.1.

Pricing Arrangement: Firm Fixed Price

1 Set

B004 Data Item 004 - Test/Inspection Report to be completed in accordance with SOW item 581-11-002 paragraph 3.1.1, 3.1.2,

3.6.3 and 3.6.3.1.

Pricing Arrangement: Firm Fixed Price

1 Set

B005 Data Item 005 - Test/Inspection Report to be completed in accordance with SOW item 582-11-002 paragraph 3.3, 3.1.1 and 3.3.2.

Pricing Arrangement: Firm Fixed Price

1 Set

B006 Data Item 006 - Test/Inspection Report to be completed in accordance with SOW item 582-11-002 paragraph 3.3.3 and 3.3.3.1.

Pricing Arrangement: Firm Fixed Price

1 Set

B007 Data Item 007 - Test/Inspection Report to be completed in accordance with SOW item 611-11-001 paragraph 3.1 and 3.1.1.

Pricing Arrangement: Firm Fixed Price

1 Set

B008 Data Item 008 - Government Property (GP) Inventory Report to be completed in accordance with SOW item 992-31-001 paragraph 3.1.4.

Pricing Arrangement: Firm Fixed Price

1 Set

B009 Data Item 009 - Contractor's Personnel Roster to be completed in accordance with SOW item 992-31-001 paragraph 3.3.3.

Pricing Arrangement: Firm Fixed Price

1 Set

B010 Data Item 010 - Vessel Docking and Undocking Plan to be completed in accordance with SOW item 997-11-001 paragraph

3.1. through 3.2.

Pricing Arrangement: Firm Fixed Price

1 Set

B011 Data Item 011 - Test/Inspection Report to be completed in accordance with SOW item 997-11-001 paragraph 3.4 through 3.5.2.1.

Pricing Arrangement: Firm Fixed Price

1 Set

B012 Data Item 012 - Work Completion Certification Certificate to be completed in accordance with SOW item 997-11-001 paragraph 3.8.

Pricing Arrangement: Firm Fixed Price

1 Set

B013 Data Item 013 - Vessel Final Docking Report to be completed in accordance with SOW item 997-11-001 paragraph 3.12.

Pricing Arrangement: Firm Fixed Price

1 Set

B014 Data Item 014 - Uniform Hazardous Waste Manifest to be completed in accordance with SOW item 998-41-001 paragraph 3.1.3.

Pricing Arrangement: Firm Fixed Price

1 Set

B015 Data Item 015 - Hazardous Waste Report to be completed in accordance with SOW item 998-41-001 paragraph 3.7.

Pricing Arrangement: Firm Fixed Price

1 Set

B016 Data Item 016 - Test/Inspection Report to be completed in accordance with SOW item 123-21-001 paragraph 3.1.2, 3.1.2.1,

3.6 and 3.6.1.

Pricing Arrangement: Firm Fixed Price

1 Set

Section C - Description/Specifications/Statement of Work

Requirements Barge Overhaul Services

Additional Regulation or Supplemental Clauses Incorporated by Full Text

C-202-H001 ADDITIONAL DEFINITIONS--BASIC (Oct 2018)

(a) Department means the Department of the Navy.

(b) Commander, Naval Sea Systems Command means the Commander of the Naval Sea Systems Command of the Department of the Navy or his duly appointed successor.

(c) References to The Federal Acquisition Regulation (FAR) All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.

(d) National Stock Numbers Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:

(1) . The number assigned to each approved Item Identification under the National Item Identification Number (NIIN) Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit nonsignificant number.

(2) . The National Stock Number (NSN) for an item of supply consists of the applicable National Stock Number (NSN) four-position Federal Supply Class (FSC) plus the applicable nine-position NIIN assigned to the item of supply.

(Endof Text)

C-204-H001 USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES (Oct 2018)

(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as "protected information". File room management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:

(1) The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.

(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors should enter into separate non-disclosure agreements with the file room contractor. Contact the Procuring Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.

(End of Text)

C-211-H020 PROTECTION OF THE VESSEL (NAVSEA) (MAR 2019) (Mar 2019)

(a) The Contractor shall exercise reasonable care, as agreed upon with the Supervisor, to protect the vessel from fire, and shall maintain a system of inspection over the activities of its welders, burners, riveters, painters, pipe fitters, and similar workers, and of its subcontractors, particularly where such activities are undertaken in the vicinity of the vessel's magazines, fuel oil tanks, or store rooms containing inflammable materials. All ammunition, fuel oil, motor fuels, and cleaning fluids shall have been offloaded and the tanks cleaned, except as may be mutually agreed upon between the Contractor and the Supervisor prior to work on the vessel by the Contractor. Fire hose lines shall be maintained by the Contractor ready for immediate use on the vessel at all times while the vessel is berthed alongside the Contractor's pier or in dry dock. All tanks under alteration or repair shall be cleaned, washed, and steamed out or otherwise made safe to the extent necessary, and the Contractor shall furnish the vessel's Gas Free Officer and the Supervisor with a "Gas Chemists' Certificate" before any hot work is done. The Contractor shall maintain a fire watch aboard the vessel in areas where the Contractor is working. All other fire watches aboard the vessel shall be the responsibility of the Government.

(b) Except as otherwise provided in contractually invoked technical specifications or NAVSEA furnished directives, while the vessel is at the Contractor's plant and when the temperature becomes as low as thirty five degrees Fahrenheit, the Contractor shall assist the Government when requested in keeping all pipelines, fixtures, traps, tanks, and other receptacles on the vessel drained to avoid damage from freezing, or if this is not practicable, the vessel shall be kept heated to prevent such damage. The vessel's stern tube and propeller hubs shall be protected by the Contractor from frost damage by applied heat through the use of a salamander or other proper means.

(c) The work shall, whenever practicable, be performed in such manner as not to interfere with the work performed by military personnel attached to the vessel, and provisions shall be made so that personnel assigned shall have access to the vessel at all times, it being understood that such personnel will not unduly interfere with the work of the Contractor's workmen.

(d) The Contractor shall at all times keep the site of the work on the vessel free from accumulation of waste material or rubbish caused by its employees, or the work performed by the Contractor in accordance with this contract, and at the completion of such work shall remove all rubbish from and about the site of the work, and shall leave the work in its immediate vicinity "broom clean", unless more exactly specified by the Supervisor.

(End of Text)

C-211-H005 PLANT PROTECTION (NAVSEA) (APR 2024) (Apr 2024)

(a) In accordance with NAVSEA STANDARD ITEM (SI) 009-72 dated 01 October 2023 the Contractor shall develop, maintain, and implement, as necessary, a Plant Protection Plan or a prior approved plan which prescribes the actions and procedures and assigns responsibilities for actions to be taken to provide adequate protection of the ship(s) and the materials and equipment to be installed therein. A copy of SI 009-72 can be obtained from the purchasing office representative listed in Section G of the contract or via the internet by going to http://www.navsea.navy.mil/Home/RMC/CNRMC/OurPrograms/SSRAC/NSI/ and selecting the NAVSEA Standard Items (NSI) tab then select the applicable FY standard item link and then select SI 009-72.

(b) The Contractor shall establish and maintain, for its plant and the work in process under this contract, physical security boundaries and other security measures to provide safeguards against hazards, including unauthorized entry, malicious mischief, theft, espionage, sabotage, and terrorism to U.S. Naval Vessels and their crews, in accordance with SI 009-72 and Attachment A thereto. The Contractor shall also provide reasonable safeguards against vandalism and fire.

(c) The Contractor shall meet the requirements of Force Protection Condition NORMAL (as defined in SI 009-

72) at all times. In addition, and in accordance with SI 009-72, the Contractor shall meet the requirements of increased levels of Force Protection as may be required or approved by the Contracting Officer, or when notified by the Supervisor, for the protection of its plant and the work in process under this contract against any threats including terrorism, espionage, sabotage, and enemy action.

(d) At the Supervisor's discretion, the Contractor and the Supervisor shall negotiate a cost rate agreement applicable to each level of increased Force Protection above the NORMAL level. In addition to material costs, the labor cost rates shall be negotiated using the contractor's and the Supervisor's accepted common business practices. The labor and material costs to the Contractor for all safeguards so required or approved shall, to the extent allowable and allocable to this contract, be reimbursed to the Contractor in the same manner as if the Contractor has furnished such safeguards pursuant to a change order issued under the clause of this contract entitled "Changes-Fixed Price" (FAR 52.2431) or "Changes-CostReimbursement" (FAR 52.2432), as applicable.

Such costs shall not include any allowance on account of overhead expense, except shop overhead charges incident to the construction or installation of such devices or equipment.

(e) Upon payment, in accordance with the Payments provision of this contract, by the Government of the cost to the Contractor for any device or equipment required or approved under paragraph (c) above, title thereto shall vest in the Government, and the Contractor shall comply with the instructions of the Contracting Officer respecting the identification and disposition thereof. No part or item of any such devices or equipment shall be or become a fixture by reason of affixation to any realty not owned by the Government.

(f) The plant protection plan and rate agreements required by this requirement shall be completed and implemented, within sixty (60) days of contract award for new construction and prior to ship arrival for conversion, repair or overhaul.

(End of text)

C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019) (Jan 2019)

Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.

(End of Text)

C-211-H004 HEAVY WEATHER PLAN (NAVSEA) (APR 2024) (Apr 2024)

(a) In order to ensure that Naval vessel(s), material and Government property are protected during destructive weather such as gales, storms, hurricanes, high winds, heavy snow, ice and high water, the Contractor is required to have a written Heavy Weather Plan (HWP) which assigns responsibilities and prescribes actions to be taken on the approach of and during heavy weather conditions as delineated in NAVSEA Standard Item (SI) 009-69 dated . A copy of Standard Item (SI) 009-69 can be obtained from via the internet by going to:

http://www.navsea.navy.mil/Home/RMC/CNRMC/OurPrograms/SSRAC/NSI/ and selecting the NAVSEA Standard Items (NSI) tab then select the applicable FY standard item link and then select SI 009-69. In accordance with SI 009-69, the Contractor shall furnish to the cognizant Regional Maintenance Center (RMC), a copy of such HWP, and shall make such changes in the plan as the RMC considers necessary and reasonable to protect and care for vessel(s), material and Government property.

(b) In the event the RMC directs the Contractor to implement the HWP pursuant to SI 009-69 the Contractor may submit to the Contracting Officer a request for reimbursement for costs resulting from such actions together with any documentation that the Contracting Officer may reasonably require. The Government shall reimburse the Contractor for all reasonable, allowable and allocable costs resulting from the Contractor's implementation of the HWP based on such Government direction.

(End of text)

C-211-H010 TUG AND PILOT SERVICES (NAVSEA) (OCT 2018) (Oct 2018)

The Contractor shall provide necessary tug and pilot services to move the vessel(s) from the fairway of the plant to the pier or dock, and upon completion of all work from the pier or dock, to the fairway of the plant.

(End of Text)

C-212-W001 CONTRACT TERMS AND CONDITIONS—COMMERCIAL ITEMS ADDENDUM

TO 52.212-4 (NAVSEA) (OCT 2018)

(Oct 2018)

(o) Warranty -- append the following to paragraph (o):

The contractor shall extend to the Government the full coverage of any standard commercial warranty normally offered in a similar commercial sale at no additional cost to the Government. Acceptance of the standard commercial warranty does not waive the Government's rights under the "Inspection" clause nor does it limit the Government's rights with regard to the other terms and conditions of this contract. In the event of a conflict, the terms and conditions of the contract shall take precedence over the standard commercial warranty. The standard commercial warranty period shall begin upon final acceptance of the applicable material and/or services listed in the Schedule.

The contractor shall provide a copy of its standard commercial warranty (if applicable) with its offer. The warranty covers a period of months. ( Offeror is to insert number.)

The following information is hereby appended to the clause:

(w) Data Rights. The Government shall have data rights to all data generated under this contract or order in accordance with

DFARS 252.227-7015.

(x) Ordering. The agency authorized to place delivery orders against this contract is: [Add ordering activity name]. Delivery orders will be placed against this contract, by the Government, using the SF 1449.

(End of Text)

C-215-H002 CONTRACTOR PROPOSAL (NAVSEA) (OCT 2018) (Oct 2018)

(a) Performance of this contract by the Contractor shall be conducted and performed in accordance with detailed obligations to which the Contractor committed itself in its Proposal submitted in response to NAVSEA Solicitation No. N3904026Q4819 .

(b) The technical volume(s) of the Contractor's proposal is(are) hereby incorporated by reference and made subject to the "Order of Precedence" (FAR 52.215-8) clause of this contract. Under the "Order of Precedence" clause, the technical volume(s) of the Contractor's proposal referenced herein is (are) hereby designated as item (f) of the clause, following "the specifications" in the order of precedence.

(End of Text)

C-222-H002 DEPARTMENT OF LABOR SAFETY AND HEALTH STANDARDS FOR

SHIPBUILDING (NAVSEA) (OCT 2018)

(Oct 2018)

Attention of the Contractor is directed to Public Law 91596, approved December 29, 1970 (84 Stat. 1590, 29 USC 655) known as the "Occupational Safety and Health Act of 1970" and to the "Occupational Safety and Health Standards for Shipyard Employment" promulgated thereunder by the Secretary of Labor (29 CFR. 1910 and 1915). These regulations apply to all shipbuilding and related work, as defined in the regulations. Nothing contained in this contract shall be construed as relieving the Contractor from any obligations which it may have for compliance with the aforesaid regulations.

(End of Text)

C-222-H001 ACCESS TO THE VESSELS BY NON-U.S. CITIZENS (NAVSEA) (APR 2019) (Apr 2019)

(a) No person not known to be a U.S. citizen shall be eligible for access to naval vessels, work sites and adjacent areas when said vessels are under construction, conversion, overhaul, or repair, except upon a finding by COMNAVSEA or his designated representative that such access should be permitted in the best interest of the United States. The Contractor shall establish procedures to comply with this requirement and NAVSEAINST 5510.2D.

(b) If the Contractor desires to employ non-U.S. citizens in the performance of work under this contract or agreement that requires access as specified in paragraph (a) of this requirement, approval must be obtained prior to access for each contract or agreement where such access is required. To request such approval for non-U.S. citizens of friendly countries, the Contractor shall submit to the cognizant Contract Administration Office (CAO), an Access Control Plan (ACP) which shall contain as a minimum, the following information:

(1) Badge or Pass oriented identification, access, and movement control system for non-U.S. citizen employees with the badge or pass to be worn or displayed on outer garments at all times while on the Contractor's facilities and when performing work aboard ship.

(i) Badges must be of such design and appearance that permits easy recognition to facilitate quick and positive identification.

(ii) Access authorization and limitations for the bearer must be clearly established and in accordance with applicable security regulations and instructions.

(iii) A control system, which provides rigid accountability procedures for handling lost, damaged, forgotten or no longer required badges, must be established.

(iv) A badge or pass check must be performed at all points of entry to the Contractor's facilities or by a site supervisor for work performed on vessels outside the Contractor's plant.

(2) Contractor's plan for ascertaining citizenship and for screening employees for security risk.

(3) Data reflecting the number, nationality, and positions held by nonU.S. citizen employees, including procedures to update data as nonU.S. citizen employee data changes, and pass to cognizant CAO

(4) Contractor's plan for ensuring subcontractor compliance with the provisions of the Contractor's ACP.

(5) These conditions and controls are intended to serve as guidelines representing the minimum requirements of an acceptable ACP. They are not meant to restrict the Contractor in any way from imposing additional controls necessary to tailor these requirements to a specific facility.

(c) To request approval for non-U.S. citizens of hostile and/or communist-controlled countries (listed in Department of Defense Industrial Security Manual, DOD 5220.22-M or available from cognizant CAO), Contractor shall include in the ACP the following employee data: name, place of birth, citizenship (if different from place of birth), date of entry to U.S., extenuating circumstances (if any) concerning immigration to U.S., number of years employed by Contractor, position, and stated intent concerning U.S. citizenship. COMNAVSEA or his designated representative will make individual determinations for desirability of access for the above group. Approval of ACP's for access of non-U.S. citizens of friendly countries will not be delayed for approval of non-U.S. citizens of hostile communist-controlled countries. Until approval is received, Contractor must deny access to vessels for employees who are non-U.S. citizens of hostile and/or communist-controlled countries.

(d) The Contractor shall fully comply with approved ACPs. Noncompliance by the Contractor or subcontractor serves to cancel any authorization previously granted, in which case the Contractor shall be precluded from the continued use of non-U.S.

citizens on this contract or agreement until such time as the compliance with an approved ACP is demonstrated and upon a determination by the CAO that the Government's interests are protected. Further, the Government reserves the right to cancel previously granted authority when such cancellation is determined to be in the Government's best interest. Use of non-U.S.

citizens, without an approved ACP or when a previous authorization has been canceled, will be considered a violation of security regulations. Upon confirmation by the CAO of such violation, this contract, agreement or any job order issued under this agreement may be terminated for default in accordance with the clause entitled "Default (Fixed-Price Supply And Service)" (FAR 52.249-8), "Default (Fixed-Price Research And Development)" (FAR 52.249-9) or "Termination (Cost Reimbursement)" (FAR 52.249-6), as applicable.

(e) Prime Contractors have full responsibility for the proper administration of the approved ACP for all work performed under this contract or agreement, regardless of the location of the vessel, and must ensure compliance by all subcontractors, technical representatives and other persons granted access to U.S. Navy vessels, adjacent areas, and work sites.

(f) In the event the Contractor does not intend to employ non-U.S. citizens in the performance of the work under this contract, but has non-U.S. citizen employees, such employees must be precluded from access to the vessel and its work site and those shops where work on the vessel's equipment is being performed. The ACP must spell out how non-U.S. citizens are excluded from access to contract work areas.

(g) The same restriction as in paragraph (f) above applies to other non-U.S. citizens who have access to the Contractor's facilities (e.g., for accomplishing facility improvements, from foreign crewed vessels within its facility, etc.) except that, with respect to access to the vessel and worksite, the restrictions shall not apply to uniformed U.S. Navy personnel who are non-U.S.

citizens and who are either assigned to the ship or require access to the ship to perform their duties.

(End of Text)

C-223-N002 RESTRICTIONS ON USE OF YELLOW MATERIAL (NAVSEA) (OCT 2018) (Oct 2018)

Yellow colored items are of special significance within the Shipyard and are subject to strict controls. Accordingly, contractors shall not use yellow or orange-yellow colored materials for the following purposes: protective clothing, hoods, sheeting, tarpaulins, polyethylene bottles or other containers, tapes, bags, banding, identification marks on tools, boundary markers, ribbons, vent ducts, etc. Contractor generated yellow colored waste shall be disposed of by the Contractor off-yard. Shipyard refuse containers shall not be used for disposal of yellow colored waste materials. Yellow colored contract generated debris shall be bagged in non-translucent containers, and promptly removed from the Shipyard.

(End of Text)

C-223-W002 ON-SITE SAFETY REQUIREMENTS (NAVSEA) (OCT 2018) (Oct 2018)

(a) The contractor shall ensure that each contractor employee reads any necessary safety documents within 30 days of commencing performance at any Government facility. Required safety documents can be obtained from the respective safety office. Contractors shall notify the Safety office points of contact below to report completion of the required training via email. The email shall include the contractor employee's name, work site, and contract number.

(b) It is expected that contractor employees will have received training from their employer on hazards associated with the areas in which they will be working and know what to do in order to protect themselves. Contractors are required to adhere to the requirements of 29 CFR 1910, 29 CFR 1926 and applicable state and local requirements while in Government spaces. The contractor shall ensure that all on-site contractor work at the Government facility is in accordance with any local safety instructions as provided via the COR. The contractor shall report all work-related injuries/illnesses that occurred while working at the Government site to the COR.

(c) Contractors whose employees perform work within Government spaces in excess of 1000 hours per calendar quarter during a calendar year shall submit the data elements on OSHA Form 300A, Summary of Work Related Injuries and Illnesses, for those employees to the safety office via the COR by 15 January for the previous calendar year, even if no work related injuries or , illnesses occurred. If a contractor's injury/illness rates are above the Bureau of Labor Statistics industry standards, a safety assessment may be performed by the Safety Office to determine if any administrative or engineering controls can be utilized to prevent further injuries/illnesses, or if any additional Personal Protective Equipment or training will be required.

(d) Any contractor employee exhibiting unsafe behavior may be removed from the Government site. Such removal shall not relieve the contractor from meeting its contractual obligations and shall not be considered an excusable delay as defined in FAR 52.249-14.

(e) The Safety Office points of contacts are as follows:

Code 106

Phone: 207-438-2001

(End of Text)

C-223-H004 MANAGEMENT AND DISPOSAL OF HAZARDOUS WASTE (NAVSEA) (MAY 2023) (May 2023)

(a) General

(1) The Contractor shall comply with the Resource Conservation and Recovery Act (RCRA), the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA), 10 U.S.C. 8681 and all other applicable Federal, State and local laws, codes, ordinances and regulations for the management and disposal of hazardous waste.

(2) Nothing contained in this special contract requirement shall relieve the Contractor from complying with applicable Federal, State, and local Laws, codes, ordinances, and regulations, including obtaining licenses and permits, giving notices and submitting reports, in connection with hazardous waste management and disposal in the performance of this contract. Nothing contained herein shall serve to alter either party's liability or responsibility under CERCLA.

(3) Materials contained in ship systems are not waste until after removal from the system.

(b) Identification of Hazardous Wastes as a result of this contract identifies the types and amounts of hazardous wastes that are required to be removed by the Contractor, or that are expected to be generated, during the performance of work under this contract.

(c) Generator Identification Numbers

(1) Documentation related to hazardous waste generated solely by the physical actions of ship's force or Navy employees on board the vessel shall only bear a generator identification number issued to the Navy pursuant to applicable law.

(2) Documentation related to hazardous waste generated solely by the physical actions of Contractor personnel shall only bear a generator identification number issued to the Contractor pursuant to applicable law. Regardless of the presence of other materials in or on the shipboard systems or structures which may have qualified a waste stream as hazardous, where the Contractor performs work on a system or structure using materials (whether or not the use of such materials was specified by the Navy) which by themselves would cause the waste from such work to be a hazardous waste, documentation related to such waste shall only bear a generator identification number issued to the Contractor.

(3) Documentation related to hazardous waste generated by the combined physical actions of Navy and Contractor personnel shall bear a generator identification number issued to the Contractor pursuant to applicable law and shall also cite in the remarks block a generator identification number issued to the Navy pursuant to applicable law.

(4) Notwithstanding paragraphs (c)(1) - (c)(3) above, hazardous wastes are considered to be co-generated in cases where:

(a) the Contractor merely drains a system and such drainage creates hazardous waste or (b) the Contractor performs work on a system or structure using materials which by themselves would not cause the waste from such work to be hazardous waste but such work nonetheless creates a hazardous waste. Documentation related to such co-generated waste shall bear a generator identification number in accordance with the provisions of paragraph (c)(3) above.

(5) In the event of a failure by the parties to agree to the assignment of a generator identification number to any hazardous waste as set forth in paragraphs (c)(1) through (c)(4) above, the Government may direct which party or parties shall provide generator identification numbers for the waste and such number(s) shall be used on all required documentation. Any disagreement with this direction shall be a dispute within the meaning of clause of this contract entitled "Disputes" (FAR 52.233-1). However, the Contractor shall not stop any work but shall continue with performance of all work under this contract as specified in the "DISPUTES" clause.

(6) Hazardous Waste Manifests For wastes described in (c)(2), (c)(3), and (c)(4) above (and (c)(5) as applicable), the Contractor shall sign the generator certification on the Uniform Hazardous Waste Manifest whenever use of the Manifest is required for disposal. The Contractor shall obtain concurrence with the categorization of wastes under the COR's paragraphs (c)(3) and (c)(4) above before completion of the manifest. Manifests prepared pursuant to paragraph (c)(1) above shall be presented to the for completion after the hazardous waste has been identified. the COR

(7) For purposes of paragraphs (c)(2) and (3) herein, if the Contractor, while performing work at a Government facility, cannot obtain a separate generator identification number from the State in which the availability will be performed, the Contractor shall notify within 3 business days of receipt of written notification by the State. After obtaining the COR the contracting officer approval, the Contractor shall use the Navy site generator identification number and insert in the remarks block the contractor generator identification number issued for the site where his main facilities are located. For purposes of paragraph (c)(1) herein, if the work is being performed at a contractor facility and the Government cannot obtain a separate generator identification number for the State, the Government shall use the Contractor site generator identification number and shall cite in the remarks block a Navy generator identification number. In both instances described above, the Contractor shall prepare the Uniform Hazardous Waste Manifest described in paragraph (c)(6) above and present it to for completion.the COR

(End of Text)

C-223-H002 SAFETY, HEALTH AND FIRE REQUIREMENTS FOR SHIP REPAIR (NAVSEA)

(JAN 2019)

(Jan 2019)

(a) Attention of the Contractor is directed to the Occupational Safety and Health Act of 1970 (29 USC 651-678), and to the Safety and Health Regulations for Ship Repairing (29 CFR 1915), promulgated under Public Law 85-742, amending Section 41 of the Longshoremen's and Harbor Workers' Compensation Act (33 USC 941), and adopted by the Department of Labor as occupational safety or health standards under Section 6(a) of the Occupational Safety and Health Act of 1970 (See 29 CFR 1910.13). These regulations apply to all ship repair and related work, as defined in the regulations performed under this contract on the navigable waters of the United States including any dry dock and marine railway. Nothing contained in this contract shall be construed as relieving the Contractor from any obligations which it may have for compliance with the aforesaid regulations.

(b) SAFETY INSPECTOR/FIRE MARSHAL: In addition to the safety standards provided in the specifications, the contractor is responsible for providing an experienced Safety Inspector/Fire Marshal who will accomplish daily inspections of the Contractor's entire work area on the ship, together with the Contracting Office's Safety Representative. This Inspector or Fire Marshal shall not be one of the Contractor's supervisors or superintendents normally assigned to the ship and shall be identified in the contractor's approved Safety Plan.

(c) PERSONAL PROTECTIVE EQUIPMENT: Whenever work is performed aboard U.S. Naval Ships or vessels at piers or dry docks of a Naval Shipyard or Naval Station, Contractor employees (including management personnel) shall have and use at all times the following personal protective equipment:

(1) Protective hard hats that meet the following specifications:

(i) Protective helmets purchased after July 5, 1994 shall comply with ANSI Z89.1-1986, "American National Standard for Personnel Protection-Protective Headwear for Industrial Workers-Requirements," or shall be demonstrated by the Contractor to be equally effective.

(ii) Protective helmets purchased before July 5, 1994 shall comply with ANSI Standard "American National Standard Safety requirements for Industrial Head Protection," Z89.1-1969, or shall be demonstrated by the employer to be equally effective. [Ref. 29 CFR 1910.135 Head Protection]

(2) Approved type Plano or prescription glasses meeting the following specifications:

(i) Protective eye and face devices purchased after July 5, 1994 shall comply with ANSI standard Z87.1-1989, "American National Standard Practice for Occupational and Educational Eye and Face Protection", or shall be demonstrated by the employer to be equally effective.

(ii) Protective eye and face devices purchased before July 5, 1994 shall comply with ANSI "USA standard for Occupational and Educational Eye and Face Protection", Z87.1-1968, or shall be demonstrated by the employer to be equally effective. [Ref. 29 CRF 1910.133 Protective eye and face devices.]

(3) Safety toe shoes, with built-in protective toe box that meet the following specifications:

(i) Protective footwear purchased after July 5, 1994 shall comply with ANSI Standard Z41-1991, "American National Standard for Personal Protection-Protective Footwear", or shall be demonstrated by the employer to be equally effective.

(ii) Protective footwear purchased before July 5, 1994 shall comply with the ANSI standard "USA Standard for Men's Safety Toe Footwear", Z41.1 1967, or shall be demonstrated by the employer to be equally effective [Ref. 29 CFR 1910.136 Protective eye and face devices.]

(End of Text)

C-223-H003 EXCLUSION OF MERCURY (NAVSEA) (MAR 2019) (Mar 2019)

(a) Definitions. As used in this text:

Article means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and

(iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees.

Boundary of containment means a continuous tight seal (barrier) to prevent the release of functional mercury during normal operation and maintenance. Examples include the exterior of a fluorescent lamp, glass capsule of a mercury switch, and container for mercury reagents. A double boundary of containment consists of two independent seals.

Functional mercury means mercury or mercury compound(s) contained in equipment that is required for the equipment to operate properly, such as that found in mercury switches, fluorescent lamps, flat-panel monitors, thermostats, thermostat probes, small coin type batteries, barometers, and dental amalgams.

Hardware means any article, container, piece of material, individual part, subassembly, assembly, component, or system to which mercury control requirements apply.

Mercury-free means hardware that does not contain functional mercury and is not contaminated by mercury or mercury compounds.

Portable means items that are frequently transported during normal operation. Desk lamps, shop lights, and hand-held instruments are considered portable, while bulbs in stationary light…