Attachment (2) DD254 PMRF Helicopters 6 16 26 CLEAN signed.pdf
PDF 439 KB Posted
- Attached to
- N00421-26-R-0002
- Solicitation number
- N00421-26-R-0002
About this file
This is a DD Form 254, Contract Security Classification Specification, dated January 26, 2026, for a Contracted Air Services (CAS) requirement at Pacific Missile Range Facility (PMRF) in Kauai, Hawaii. The solicitation number is N0042126R0002 with a due date marked as TBD. This is an original specification for proposal purposes only (not valid for performance) and represents a follow-on to a preceding contract (N0042122D0004). The actual performance location is identified as Pacific Missile Range Facility, Barking Sands, Kauai, Hawaii.
The requirement involves Contractor Owned Contractor Operated (COCO) commercial helicopter assets to replace U.S. Navy H-3 helicopters that have been removed from inventory. Tasking for the commercial assets includes target recovery, visual surveillance, range clearing, transport of military and government personnel to and from ships or shore facilities, movement of hazardous materials (ordnance), and firefighting support when required. A Secret facility security clearance is required, with no safeguarding requirements at the contractor facility. The contractor will have access to classified information only at another contractor's facility or government activity and must perform services only. Security requirements include access to NATO information, Foreign Government Information, Non-SCI National Intelligence Information, and Controlled Unclassified Information. The contracting activity is Fleet Readiness Center (FRC) East, located in Cherry Point, North Carolina, with Shane Dalpiaz identified as the point of contact. The certifying official is Nicholas R. Drake, Contracting Officer Security Representative.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CLASSIFICATION (When filled in): Unclassified
01.26.2026
PREVIOUS EDITION IS OBSOLETE. Page 1 of 4DD FORM 254, APR 2018
DEPARTMENT OF DEFENSE
CONTRACT SECURITY CLASSIFICATION SPECIFICATION
(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)
OMB No. 0704-0567 OMB approval expires:
June 30, 2025
The public reporting burden for this collection of information, 0704-0567, is estimated to average 36 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.
1. CLEARANCE AND SAFEGUARDING
a. LEVEL OF FACILITY SECURITY CLEARANCE (FCL) REQUIRED
(See Instructions)
Secret
b. LEVEL OF SAFEGUARDING FOR CLASSIFIED INFORMATION/
MATERIAL REQUIRED AT CONTRACTOR FACILITY
None (See instructions)
2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)
a. PRIME CONTRACT NUMBER (See instructions.)
For Proposal Purposes - Not Valid For Performance (NVFP)
b. SUBCONTRACT NUMBER
c. SOLICITATION OR OTHER NUMBER
N0042126R0002
DUE DATE (YYYYMMDD)
TBD
3. THIS SPECIFICATION IS: (X and complete as applicable.)
a. ORIGINAL (Complete date in all cases.)
DATE (YYYYMMDD)
20260126
b. REVISED (Supersedes all previous specifications.)
REVISION NO. DATE (YYYYMMDD)
c. FINAL (Complete Item 5 in all cases.) DATE (YYYYMMDD)
4. IS THIS A FOLLOW-ON CONTRACT? No Yes If yes, complete the following:
Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.N0042122D0004
5. IS THIS A FINAL DD FORM 254? No Yes If yes, complete the following:
In response to the contractor's request dated , retention of the classified material is authorized for the period of:
6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)
a. NAME, ADDRESS, AND ZIP CODE
TBD
b. CAGE CODE
TBD
c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)
TBD
7. SUBCONTRACTOR(S) (Click button if you choose to add or list the subcontractors -- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor) Add Row Remove Last Row Delete All Rows
a. NAME, ADDRESS, AND ZIP CODE N/A
b. CAGE CODE
N/A
N/A
8. ACTUAL PERFORMANCE (Click button to add more locations.) Add Row Remove Last Row Delete All Rows
a. LOCATION(S) (For actual performance, see instructions.)
Pacific Missile Range Facility Barking Sands, Kauai, HI
b. CAGE CODE (If applicable, see Instructions.)
N/A
N/A
9. GENERAL UNCLASSIFIED DESCRIPTION OF THIS PROCUREMENT
Pacific Missile Range Facility (PMRF), Kauai, Hawaii (HI) has a requirement for Contracted Air Services (CAS) in support of the PMRF range. Due to the United States Navy’s (USN) H-3 helicopters being removed from inventory, Contractor Owned Contractor Operated (COCO) commercial assets replaced military helicopters. Tasking for the COCO assets will include but is not limited to target recovery, visual surveillance, range clearing, transport of military/government personnel to/from ships or shore facilities, movement of hazardous material (ordinance), and when required, firefighting support..
01.26.2026
PREVIOUS EDITION IS OBSOLETE. Page 2 of 4DD FORM 254, APR 2018
10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)
a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION f. SPECIAL ACCESS PROGRAM (SAP) INFORMATION
b. RESTRICTED DATA g. NORTH ATLANTIC TREATY ORGANIZATION
(NATO) INFORMATION
c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION (CNWDI) (If CNWDI applies, RESTRICTED DATA must also be marked.) h. FOREIGN GOVERMENT INFORMATION
d. FORMERLY RESTRICTED DATA i. ALTERNATIVE COMPENSATORY CONTROL MEASURES
(ACCM) INFORMATION
e. NATIONAL INTELLIGENCE INFORMATION:
(1) Sensitive Compartmented Information (SCI)
(2) Non-SCI
j. CONTROLLED UNCLASSIFIED INFORMATION (CUI) (See instructions.)
k. OTHER (Specify) (See instructions.)
Access to SIPRNet authorized, Secure Terminal Equipment (STE) or Secure Facsimile use authorized.
11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)
a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT
ANOTHER CONTRACTOR'S FACILITY OR A GOVERNMENT
ACTIVITY
(Applicable only if there is no access or storage required at contractor facility.
See instructions.)
b. RECEIVE AND STORE CLASSIFIED DOCUMENTS ONLY
c. RECEIVE, STORE, AND GENERATE CLASSIFIED
INFORMATION OR MATERIAL
d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE
e. PERFORM SERVICES ONLY
f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE
THE U.S.,PUERTO RICO, U.S. POSSESSIONS AND TRUST
TERRITORIES
g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE
TECHNICAL INFORMATION CENTER (DTIC) OR OTHER
SECONDARY DISTRIBUTION CENTER
h. REQUIRE A COMSEC ACCOUNT
i. HAVE A TEMPEST REQUIREMENT
j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS
k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE
l. RECEIVE, STORE, OR GENERATE CONTROLLED UNCLASSIFIED
INFORMATION (CUI).
(DoD Components: refer to DoDI 5200.48, only for specific CUI protection requirements. Non-DoD Components: see instructions.)
m. OTHER (Specify) (See instructions.)
12. PUBLIC RELEASE
Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority.
Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)
DIRECT THROUGH (Specify below)
Transmissions by non-secure facsimile or e-mail is NOT authorized (by prime or subcontractor(s))
Public Release Authority:
Submit ALL Public Releases to: PMA226_CAS@us.navy.mil. NAVAIR FORM
5720.10 must be completed and submitted.
13. SECURITY GUIDANCE Add Signature Remove Last Signature Delete All Signatures
The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract;
and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.
(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.)
Technical papers, briefings, presentations, either classified or unclassified to be presented at classified symposia must be submitted to A0N0000 for approval prior to presentation. Unclassified material submitted for public release (that is not to be presented at classified symposia) shall be forwarded for review prior to release as stated in item 12 above. All controlled unclassified and classified technical information shall be appropriately marked with distribution statements as specified in DoDI 5230.24 (Distribution Statements on Technical Documents)
Determination of need-to-know in connection with a classified visit is the responsibility of the individual/host who will disclose the classified information.
All contracts with non-Sensitive Compartmented Information and Non-Compartmented work that may reveal mission-related information of a sensitive activity or sensitive operation should be routed to the NAVAIR SIO for approval.
The COR, TPOC, and Government Security Office, concerning instances of possible loss, compromise, and electronic spillage of classified or controlled unclassified information shall be notified immediately upon discovery and/or no later than 72 hours of discovery.
10e(2) – The contractor is authorized access to Non-SCI National Intelligence Information and/or Foreign Intelligence Information on behalf of Rebecca Ahne, NAVAIR Senior Intelligence Officer. A final security clearance at the appropriate level is required for access to Non-SCI National Intelligence Information and/or Foreign Intelligence
01.26.2026
PREVIOUS EDITION IS OBSOLETE. Page 3 of 4DD FORM 254, APR 2018 information. Further security guidance for reproduction, release, retention, return, and destruction of National Intelligence Information is stipulated in the attached NAVAIR Memorandum titled POLICY GOVERNING RELEASE OF INTELLIGENCE TO CONTRACTORS dated 01 MARCH 2022. Written concurrence of the Technical Point of Contact/Contracting Officer Representative/ Industrial Security Representative (as applicable) is required prior to subcontracting.
10.g – Access to NATO information requires a final U.S. Government clearance at the appropriate level and a NATO access brief. Special briefings are required for access to NATO. Written concurrence of the Contracting Officer Representative for Security is required prior to subcontracting
10.h –Foreign Government Information (FGI) is not releasable to contractor employees who have not received a final security clearance at the appropriate level. Written concurrence of the Contracting Officer Representative for Security is required prior to subcontracting.
10.j/11.l – Controlled Unclassified Information including Legacy FOUO and Covered Defense Information (meeting the definition of DFARS Clause 252.204–7012 Safeguarding covered defense information and cyber incident reporting) generated and/or provided under this contract shall be marked and safeguarded as specified in DoD Instruction 5200.48 (Controlled Unclassified Information) (CUI)) available at https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520048p.PDF. Any product containing Covered Defense Information shall be assigned the appropriate distribution statement using the criteria set forth in DoDI 5230.24 (Distribution Statements on DoD Technical Information); and have this statement displayed per DoDI 5230.24, Enclosure 3-4.
All Covered Defense Information (CDI), Legacy FOUO, and program Controlled Unclassified Information (CUI) data transmitted and safeguarded via electronic means shall use approved encryption. The Contractor shall ensure that when transmitting CUI/Legacy FOUO/CDI over non-secure e-mail (e.g. not connected to the Navy Marine Corps Intranet through Broadband Unclassified Remote Access System/Virtual Private network), those transmissions are encrypted using Department of Defense Public Key Infrastructure (PKI), or an approved DoD External Certificate Authority, in accordance with Public Key Infrastructure & Public Key Enabling, DoDI 8520.02, 18 May 2023.
11.a – All classified information/material shall be provided by the contractor facility or Government Contracting Activity (GCA) and safeguarded at the approved actual performance site.
11.j – PMA226 has made a determination that BASIC Operations Security (OPSEC) measures are sufficient to protect the contracted related Critical Information associated with this Contract. The NAVAIR DD254 OPSEC Annex, dated Jan 2013, shall be included as an attachment to this DD254. When basic OPSEC measures are prescribed, there shall be no required OPSEC CDRLs associated with this contract. However, the contractor will adhere to all OPSEC requirements specified in the NAVAIR DD254 OPSEC Annex. The Contractor shall be responsible for subcontractor implementation of the OPSEC Program requirements for this contract.
11.j – OPSEC: While performing aboard NAVAIR or other U.S. military sites, the contractor shall comply with the provisions of SECNAVINST 3070.2A, the local Command/Facility 3070.2A Instruction Series (OPSEC), as well as any procedures identified in Program-Specific Operations Security Plans and Program Protection Plans (PPP) as applicable. The contractor shall comply with any and all additional OPSEC security plans and requirements of the Hosting Command. All applicable OPSEC Plans will be provided by TPOC identified in Block 16. The prime contractor is responsible for subcontractor implementation of Operations Security.
*************************************END DD254 ADDITIONAL DATA SHEET*************************************
List of Attachments (All Files Must be attached Prior to Signing, i.e., for any digital signature on the form) Hide Attachment Bar
NAME & TITLE OF REVIEWING OFFICIAL SIGNATURE
14. ADDITIONAL SECURITY REQUIREMENTS
Requirements, in addition to NISPOM requirements for classified information, are established for this contract.
No Yes If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted.
(See instructions for additional guidance or use of the fillable PDF.)
OPSEC Annex
15. INSPECTIONS
Elements of this contract are outside the inspection responsibility of the CSO.
No Yes If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item
13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted.
(See instructions for additional guidance or use of the fillable PDF.)
16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)
a. GCA NAME
Fleet Readiness Center (FRC) East
b. ACTIVITY ADDRESS CODE (AAC) OF THE CONTRACTING OFFICE (See Instructions)
N00421
c. ADDRESS (Include ZIP Code)
FRC East PSC Box 8026 Cherry Point, NC 28533-0021
d. POC NAME Shane Dalpiaz
e. POC TELEPHONE (Include Area Code)
+1 (760) 677-5501
f. EMAIL ADDRESS (See Instructions) shane.m.dalpiaz.civ@us.navy.mil
17. CERTIFICATION AND SIGNATURES
01.26.2026
PREVIOUS EDITION IS OBSOLETE. Page 4 of 4DD FORM 254, APR 2018
Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked.
a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions)
Drake, Nicholas R
b. TITLE
Contracting Officer Security Representative (COSR)
c. ADDRESS (Include ZIP Code)
ATTN: Security 47123 Buse, Bldg 2272, Suite 350 Patuxent River, MD 20670-1547
d. AAC OF THE CONTRACTING OFFICE (See Instructions)
N00421
e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.)
N/A
f. TELEPHONE (Include Area Code)
+1 (240) 808-9058
g. EMAIL ADDRESS (See Instructions) nicholas.r.drake8.civ@us.navy.mil
h. SIGNATURE
i. DATE SIGNED (See Instructions)
18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL
a. CONTRACTOR
b. SUBCONTRACTOR
c. COGNIZANT SECURITY OFFICE FOR PRIME AND
SUBCONTRACTOR
d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY
ADMINISTRATION
e. ADMINISTRATIVE CONTRACTING OFFICER
f. OTHER AS NECESSARY (If more room is needed, continue in Item 13 or on additional page if necessary.)
TPOC, COSR
DD-254
OPSEC Attachment
CUI
NAVAIR OPERATIONS SECURITY (OPSEC) REQUIREMENTS
1. All work is to be performed in accordance with Department of Defense (DoD) and Department of
Navy (DON) Operations Security (OPSEC) requirements, per the following:
a) National Security Decision Directive 298
b) DoDD 5205.02, DoD Operations Security (OPSEC) Program
c) DoD 5205.02-M, DoD Operations Security (OPSEC) Program Manual
d) SECNAVINST 3070.2A, DON Operations Security
2. The contractor shall accomplish the following minimum requirements in support of the Naval Air
Systems Command (NAVAIR) OPSEC Program:
a) Determine Critical Information (CI) in accordance with DoD 5205.02-M (Appendix 1 through
Encl 3). CI includes those facts, which individually, or in the aggregate, reveal sensitive details about NAVAIR or the contractor’s security or operations related to the support or performance of this Statement of Work (SOW), and thus require a level of protection from adversarial collection or exploitation not normally afforded to unclassified information.
b) Practice OPSEC and implement countermeasures to protect CI and other sensitive unclassified information and activities, especially those activities or information which could compromise classified information or operations, or degrade the planning and execution of military operations performed or supported by the contractor in support of the mission. Protection of
CI will include the adherence to and execution of countermeasures which the contractor initiates or provided by NAVAIR, for CI on or related to the SOW.
c) Sensitive unclassified information is that information marked Controlled Unclassified
Information (CUI), Privacy Act of 1974, COMPANY PROPRIETARY, and also information as identified by NAVAIR or NAVAIR Contracting Officer Security Representative (COSR).
d) NAVAIR has identified the following baseline CI:
DAILY ACTIVITIES
1) Details regarding military operations, missions and exercises
2) Details of U.S. systems supporting combat operations (numbers, timelines, locations effectiveness, unique capabilities, etc.)
3) Operational characteristics for new or modified weapon systems (Probability of Kill
(PK), Countermeasures, Survivability, etc.)
4) Required performance characteristics of U.S. systems using leading edge or greater technology (new, modified or existing)
5) Test or evaluation information pertaining to schedules of events during which CI may be captured
6) Details of NAVAIR unique Test or Evaluation capabilities (disclosure of unique capabilities)
7) Any material designated at Controlled Unclassified Information (CUI) such as
NOFORN, and other distribution statement-controlled documents as well as
Proprietary, or Business Sensitive Information (to include Source Selection
Information or other sensitive competitive information)
8) Known or probable vulnerabilities to any U.S. system and their direct support systems
SECURITY RESPONSIBILITIES
9) Government personnel information that would reveal force structure and readiness
10) Detailed facility maps or installation overhead photography (photo with annotation of
Command areas or greater resolution than commercially available)
11) Force Protection specific capabilities or response protocols
12) Vulnerabilities in Command processes, disclosure of which could allow circumvention of security, financial, personnel safety, or operations procedures
13) Details of COOP, NAVAIR emergency evacuation or emergency recall procedures
14) Network User ID’s and Passwords and access codes to restricted/controlled spaces
15) Existence and/or details of intrusions into or attacks against DoD Networks or
Information Systems, including, but not limited to, tactics, techniques and procedures used, network vulnerabilities exploited, and data targeted for exploitation
16) Compilations of information that directly disclose Command CI
17) Command leadership and VIP agendas, reservations, plans/routes, etc.
3. All CI developed by the contractor and/or NAVAIR, in electronic or hardcopy form, shall be protected by a minimum of the following countermeasures:
a) All emails containing CI must be DoD Public Key Infrastructure (PKI) signed and PKI encrypted
b) CI may not be sent via unclassified fax when practical
c) CI may not be discussed via non-secure phones when practical
d) CI may not be provided to individuals that do not have a need to know it in order to complete their assigned duties
e) CI may not be disposed of in recycle bins or trash containers unless made unusable (i.e.
shredded)
f) CI may not be left unattended in uncontrolled areas
g) CI in general should be treated with the same care as CUI or Proprietary information
h) CI must be destroyed in the same manner as CUI
i) CI must be destroyed at contract termination or returned to the government at the government’s discretion
4. The contractor shall document items of CI that are applicable to contractor operations involving information on or related to the SOW. Such determinations of CI will be completed using the DoD
OPSEC Five-Step process as described in National Security Decision Directive (NSDD) 298 and
DoDMAN 5205.02 (App 1 to Encl 3).
5. Per DoDM 5205.02M (Encl 6), OPSEC training must be included as part of the contractors ongoing security awareness program. Basic OPSEC training, produced by the Interagency OPSEC
Support Staff (IOSS), can be found here - OPSE1301 OPSEC Fundamentals If this link does not work, please request a CD copy via NAVAIR Operations Officer.
6. If contractor cannot resolve an issue concerning OPSEC they will contact the COR (who will consult with the appropriate OPSEC Manager).
8. All above requirements shall be passed to all Sub-contractors.
Controlled by: NAWCAD Industrial Security
CUI Category: OPSEC and INDUSEC
Distribution/Dissemination Control: FEDCON
POC: mark.a.davis15.civ@us.navy.mil https://www.iad.gov/ioss/department/opsec-fundamentals-course-opse1300-opse1301-opse1300e-10045.cfm
DEPARTMENT OF THE NAVY
NAVAL AIR SYSTEMS COMMAND IN REPLY REFER TO
RADM WILLIAM A MOFFETT BUILDING 5510
47123 BUSE ROAD BLDG 2272 Ser V52/22-001 PATUXENT RIVER MARYLAND 20670-1547 01 Mar 2022
MEMORANDUM
From: Senior Intelligence Officer, Naval Air Systems Command, 48150 Shaw Road, Bldg 2109, Patuxent River, Maryland 20670
To: Distribution
Subj: POLICY GOVERNING RELEASE OF INTELLIGENCE TO CONTRACTORS
Ref: (a) DoDM 5105.21 SENSITIVE COMPARTMENTED INFORMATION (SCI)
ADMINISTRATIVE SECURITY MANUAL Vol 1, 16 MAY 2018
(b) DoD Directive 5148.13 INTELLIGENCE OVERSIGHT, 26 APR 2017
1. Per reference (a), the Command Senior Intelligence Officer is the official approving authority for release of intelligence information via NAVAIR contracts.
a. Contractors are not authorized to disclose further or release intelligence without the prior written notification and approval of the Senior Intelligence Officer. Contractors are not authorized to release intelligence information to sub-contractors without a sub-contract DD-254 signed by an Intelligence Officer with DD-254 signature authority appointed by the Senior Intelligence Officer.
i. All contracts and sub-contracts authorizing access to non-SCI intelligence information must include a copy of this memorandum and the following language in the DD-254:
The contractor is authorized access to non-SCI National Intelligence Information and/or Foreign Intelligence Information on behalf of Rebecca Ahne, NAVAIR Senior Intelligence Officer. A final security clearance at the appropriate level is required for access to Non-SCI National Intelligence Information and/or Foreign Intelligence information. Further security guidance for reproduction, release, retention, return, and destruction of National Intelligence Information is stipulated in the attached NAVAIR Memorandum titled POLICY GOVERNING RELEASE OF INTELLIGENCE TO CONTRACTORS dated 24 JANUARY 2022. Written concurrence of the Technical Point of Contact/Contracting Officer Representative/Contracting Officer Representative for Security (as applicable) is required prior to subcontracting.
ii. All contracts and sub-contracts authorizing access to the SECRET Internet Protocol Router Network, but not authorizing access to non-SCI intelligence, must include the following language in the DD-254:
The contractor is authorized access to the SECRET Internet Protocol Router Network; however, access to non-SCI intelligence information is not authorized.
iii. Contracts and sub-contracts authorizing access to the SECRET Internet Protocol Router Network, but DD-254 block 10e(2) is not selected meaning the contractor is not authorized access to non-SCI intelligence information, do not require review or signature by the Senior Intelligence Officer.
b. Intelligence released to contractors, all reproductions thereof, and all other material generated based on, or incorporating data there from, including authorized reproduction, remain the property of the US Government. Unless otherwise specified in the contract, the contractor shall return all intelligence documents to the Scientific and Technical Intelligence Liaison Office within 24 months of date of receipt, or the termination date of the contract. The contractor shall properly destroy and dispose of the intelligence information as soon as possible after it has served the purpose for which it was released by the government, developed, prepared, or retained after completion or termination of the contract in accordance with the NISPOM.
c. All intelligence information will be reviewed and validated by the Senior Intelligence
Officer prior to being utilized and/or delivered in a finished product. Intelligence information intended to be utilized form other contractual efforts satisfying this contract will be coordinated and approved prior to execution by all parties.
2. Per reference (b), contractor personnel involved in intelligence and intelligence-related activities are required to report any significant highly sensitive matter, or questionable intelligence activities, to the NAVAIR Senior Intelligence Officer.
3. The contractor must restrict access to only those individuals who are actually providing services under the contract with a valid need to know.
R. L. Ahne
2022-02-28T08:18:10-0500
AHNE.REBECCA.L.1113773843
PREVIOUS EDITION IS OBSOLETE.
Page of
DD FORM 254, APR 2018
NEEDS DD67
DEPARTMENT OF DEFENSE
CONTRACT SECURITY CLASSIFICATION SPECIFICATION
(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)
OMB No. 0704-0567 OMB approval expires:
June 30, 2025 The public reporting burden for this collection of information, 0704-0567, is estimated to average 36 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.
1. CLEARANCE AND SAFEGUARDING
2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)
3. THIS SPECIFICATION IS: (X and complete as applicable.)
a. ORIGINAL (Complete date in all cases.)
b. REVISED (Supersedes all previous specifications.)
4. IS THIS A FOLLOW-ON CONTRACT?
If yes, complete the following:
Classified material received or generated under
5. IS THIS A FINAL DD FORM 254?
If yes, complete the following:
6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)
7. SUBCONTRACTOR(S) (Click button if you choose to add or list the subcontractors -- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor)
8. ACTUAL PERFORMANCE (Click button to add more locations.)
10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)
e. NATIONAL INTELLIGENCE INFORMATION:
11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)
12. PUBLIC RELEASE
Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)
13. SECURITY GUIDANCE
The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.
(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.)
List of Attachments (All Files Must be attached Prior to Signing, i.e., for any digital signature on the form)
14. ADDITIONAL SECURITY REQUIREMENTS
Requirements, in addition to NISPOM requirements for classified information, are established for this contract.
If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)
15. INSPECTIONS
Elements of this contract are outside the inspection responsibility of the CSO.
If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)
16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)
17. CERTIFICATION AND SIGNATURES
Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked.
18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL
9.0.0.2.20120627.2.874785 DD 254, "DoD Contract Security Classification Specification" Hide Attachment Bar
| CurrentPage: |
| PageCount: |
| Classification (when form is filled in) (automatically filled from previous drop-down list): Unclassified |
| Serial Number: 01.26.2026 |
| 1. CLEARANCE AND SAFEGUARDING - a. LEVEL OF FACILITY SECURITY CLEARANCE (FCL) REQUIRED |
(See Instructions) - Select from drop-down list: 2
| 1. CLEARANCE AND SAFEGUARDING - b. LEVEL OF SAFEGUARDING FOR CLASSIFIED INFORMATION/MATERIAL REQUIRED AT CONTRACTOR FACILITY - select from drop-down list: 4 |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "a. ORIGINAL (Complete date in all cases.) ": 0 |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "a. ORIGINAL (Complete date in all cases.) ": 1 |
| 2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - a. PRIME CONTRACT NUMBER (See instructions.): For Proposal Purposes - Not Valid For Performance (NVFP) |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "b. REVISED (Supersedes all previous specifications.)": 0 |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "b. REVISED (Supersedes all previous specifications.)": 0 |
| 2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - b. SUBCONTRACT NUMBER: |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "c. FINAL (Complete Item 5 in all cases.)": 1 |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "c. FINAL (Complete Item 5 in all cases.)": 0 |
| 2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - c. SOLICITATION OR OTHER NUMBER: N0042126R0002 |
| 2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - c. SOLICITATION OR OTHER NUMBER - DUE DATE (YYYYMMDD): TBD |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - a. ORIGINAL (Complete date in all cases.) : 20260126 |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - b. REVISED (Supersedes all previous specifications.) - REVISION NUMBER: |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - b. REVISED (Supersedes all previous specifications.) - DATE (YYYYMMDD): |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - c. FINAL (Complete Item 5 in all cases.): |
| 3. THIS SPECIFICATION IS: (X and complete as applicable.) - c. FINAL (Complete Item 5 in all cases.) - DATE (YYYYMMDD): |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 0 |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 1 |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 0 |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 1 |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 1 |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 0 |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 1 |
| 15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 0 |
| 4. IS THIS A FOLLOW-ON CONTRACT? - If yes - Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract. - Enter preceding contract number.: N0042122D0004 |
| 5. IS THIS A FINAL DD FORM 254? - In response to the contractor's request dated (date), retention of the classified material is authorized for the period of (period) - Enter contractor's request date in format YYYYMMDD.: |
| E5. IS THIS A FINAL DD FORM 254? - In response to the contractor's request dated (date), retention of the classified material is authorized for the period of - Enter period.: |
| 17. CERTIFICATION AND SIGNATURES - Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked. - a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions): |
TBD
| 17. CERTIFICATION AND SIGNATURES - Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked. - a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions): N/A |
| 17. CERTIFICATION AND SIGNATURES - Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked. - a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions): Drake, Nicholas R |
| 17. CERTIFICATION AND SIGNATURES - e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.): TBD |
| 17. CERTIFICATION AND SIGNATURES - e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.): N/A |
| 17. CERTIFICATION AND SIGNATURES - e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.): N/A |
| 17. CERTIFICATION AND SIGNATURES - e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.): N/A |
| 8. ACTUAL PERFORMANCE - c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional): |
TBD
8. ACTUAL PERFORMANCE - c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional):
N/A
8. ACTUAL PERFORMANCE - c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional):
N/A
| 8. ACTUAL PERFORMANCE (Click button to add more locations.) - Select to add row : |
| 8. ACTUAL PERFORMANCE - Select to remove last row: |
| 13. SECURITY GUIDANCE - Select to delete all signature rows: |
| 8. ACTUAL PERFORMANCE - a. LOCATION(S) (For actual performance, see instructions.): |
Pacific Missile Range Facility Barking Sands, Kauai, HI Enter general unclassified description of this procurement.:
Pacific Missile Range Facility (PMRF), Kauai, Hawaii (HI) has a requirement for Contracted Air Services (CAS) in support of the PMRF range. Due to the United States Navy’s (USN) H-3 helicopters being removed from inventory, Contractor Owned Contractor Operated (COCO) commercial assets replaced military helicopters. Tasking for the COCO assets will include but is not limited to target recovery, visual surveillance, range clearing, transport of military/government personnel to/from ships or shore facilities, movement of hazardous material (ordinance), and when required, firefighting support..
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "a. CONTRACTOR.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "a. CONTRACTOR.": 1 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "a. CONTRACTOR.": 1 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "f. OTHER AS NECESSARY.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "f. OTHER AS NECESSARY.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "f. OTHER AS NECESSARY.": 1 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "b. SUBCONTRACTOR.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "b. SUBCONTRACTOR.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "b. SUBCONTRACTOR.": 0 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "h. REQUIRE A COMSEC ACCOUNT.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "h. REQUIRE A COMSEC ACCOUNT.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION.": 0 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "i. HAVE A TEMPEST REQUIREMENT.": 0 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "i. HAVE A TEMPEST REQUIREMENT.": 0 |
| 10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.) - e. NATIONAL INTELLIGENCE INFORMATION: Select for "(1) Sensitive Compartmented Information (SCI).": 0 |
| 10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.) - e. NATIONAL INTELLIGENCE INFORMATION: Select for "(2) Non-SCI.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Enter specification for "other." (If more room is needed, continue in Item 13 or on additional page if necessary.): Access to SIPRNet authorized, Secure Terminal Equipment (STE) or Secure Facsimile use authorized. |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Enter specification for "other." (If more room is needed, continue in Item 13 or on additional page if necessary.): TPOC, COSR |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "e. ADMINISTRATIVE CONTRACTING OFFICER.": 0 |
| 18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "e. ADMINISTRATIVE CONTRACTING OFFICER.": 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "l. RECEIVE, STORE, OR GENERATE CONTROLLED UNCLASSIFIED INFORMATION (CUI)." (DoD Components: refer to DoDI 5200.48, only for specific CUI protection requirements. Non-DoD Components: see instructions.): 1 |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "m. OTHER.": 0 |
| 12. PUBLIC RELEASE - Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions) - Select for "DIRECT": 0 |
| 12. PUBLIC RELEASE - Select for "THROUGH": 1 |
| 12. PUBLIC RELEASE - Enter specification for "through".: Transmissions by non-secure facsimile or e-mail is NOT authorized (by prime or subcontractor(s)) |
| 12. PUBLIC RELEASE - Public Release Authority:: Submit ALL Public Releases to: PMA226_CAS@us.navy.mil. NAVAIR FORM 5720.10 must be completed and submitted. |
| 13. SECURITY GUIDANCE - Select to add signature row: |
| 13. SECURITY GUIDANCE - Select to remove last signature row: |
| 13. SECURITY GUIDANCE - The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. |
(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.):
Technical papers, briefings, presentations, either classified or unclassified to be presented at classified symposia must be submitted to A0N0000 for approval prior to presentation. Unclassified material submitted for public release (that is not to be presented at classified symposia) shall be forwarded for review prior to release as stated in item 12 above. All controlled unclassified and classified technical information shall be appropriately marked with distribution statements as specified in DoDI 5230.24 (Distribution Statements on Technical Documents)
Determination of need-to-know in connection with a classified visit is the responsibility of the individual/host who will disclose the classified information.
All contracts with non-Sensitive Compartmented Information and Non-Compartmented work that may reveal mission-related information of a sensitive activity or sensitive operation should be routed to the NAVAIR SIO for approval.
The COR, TPOC, and Government Security Office, concerning instances of possible loss, compromise, and electronic spillage of classified or controlled unclassified information shall be notified immediately upon discovery and/or no later than 72 hours of discovery.
10e(2) – The contractor is authorized access to Non-SCI National Intelligence Information and/or Foreign Intelligence Information on behalf of Rebecca Ahne, NAVAIR Senior Intelligence Officer. A final security clearance at the appropriate level is required for access to Non-SCI National Intelligence Information and/or Foreign Intelligence information. Further security guidance for reproduction, release, retention, return, and destruction of National Intelligence Information is stipulated in the attached NAVAIR Memorandum titled POLICY GOVERNING RELEASE OF INTELLIGENCE TO CONTRACTORS dated 01 MARCH 2022. Written concurrence of the Technical Point of Contact/Contracting Officer Representative/ Industrial Security Representative (as applicable) is required prior to subcontracting.
10.g – Access to NATO information requires a final U.S. Government clearance at the appropriate level and a NATO access brief. Special briefings are required for access to NATO. Written concurrence of the Contracting Officer Representative for Security is required prior to subcontracting
10.h –Foreign Government Information (FGI) is not releasable to contractor employees who have not received a final security clearance at the appropriate level. Written concurrence of the Contracting Officer Representative for Security is required prior to subcontracting.
10.j/11.l – Controlled Unclassified Information including Legacy FOUO and Covered Defense Information (meeting the…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .