L-7_ATTACHMENT_SAMPLE_TASK_SOW.pdf

SOLICITATION NUMBER: N00173-14-R-RK02

ATTACHMENT L-7

SAMPLE TASK

STATEMENT OF WORK

Tactical Electronic Warfare Division, Digital Technology

1.0 INTRODUCTION

The purpose of this Task Order is to provide personnel to perform aircraft and support services to accomplish airborne-related S&T requirements for the NRL Digital Technology Section.

2.0 SCOPE

The Contractor will modify, prepare, install, operate, support as needed, and de-install EO/IR captive carry simulators on certified commercial aircraft in order to support field testing. This field testing will be conducted within the USA and may require logistical support away from the laboratory. During the execution of this field test the contractor maybe required to troubleshoot existing electronics and cabling as well as maintain the simulators in safe work condition.

3.0 TASK DESCRIPTION

3.1 Simulator Preparation

The Contractor shall participate in design, development, fabrication, and pre-installation test of simulators and supporting test equipment.

1) Analyze system and support system flight certification, mechanical wiring and component function, and electrical modification requirements.

2) Modify and update test asset documentation for the simulation and support assets.

3) Design, develop, and fabricate installation provisions.

4) Perform systems validation/verification testing of legacy flight essential

5) Assist with repair and troubleshooting of identified legacy equipment failures. Where applicable, order, repair, or replace non- functional systems, and/or components.

6) Perform on-aircraft pre-installation form/fit and bench testing of aircraft installation components.

7) Prepare for test asset transportation and movement to field test.

3.2 Simulator Support (During Field Test)

The Contractor shall provide technical support for the installation, modification, checkout, de-installation, pack up and operation of simulator systems and support equipment used for field test.

1) Prepare simulator pods and rack for aircraft install. to include system checks, pod readiness issue relating Electro Optical and Infrared Pods.

2) Install pods and racks in the aircraft.

3) Install interconnecting cables and communications gear.

4) Perform technical electronics checkout.

5) Verify operation of simulator and data acquisition system

6) Perform needed troubleshoot of any systems issue.

7) Fly in aircraft operating system collecting data, coordinating other operators

8) Report, troubleshoot systems issues, repair simulators for continued operations.

9) Participate and assist in conducting EO/IR field-test.

10) The contractor will pay for flight services as material cost from flight international L3. These flight hours will be for the duration of the test as specified in the test plan. It will also include per diem. This will be no more than a week and within the lower 48 states.

SOLICITATION NUMBER: N00173-14-R-RK02

ATTACHMENT L-7

3.3 Post Test Phase

1) The Contractor shall perform system de-install and bring systems and support equipment to laboratory.

2) Remove pods and racks from aircraft.

3) Handle logistics needs of simulators and support systems in order to return systems to NRL.

4) Document any changes to the systems while at the test.

5) Provide inputs to post analysis teams after test.

6) Deliver removed items to VXS-1 Maintenance Control for storage/disposition.

4.0 PERIOD OF PERFORMANCE

1) The project shall be completed no later than December 31, 2014.

5.0 TASK ORDER DOCUMENTS, EXHIBITS OR ATTACHMENTS

1) Attachment 1 - Cost Summary Format

2) Attachment 2 - Supporting Cost Data