Att_2_-_WBM_Spec_Response_Matrix.xlsx
XLSX spreadsheet 26 KB Posted
- Attached to
- Work Boat Medium
- Solicitation number
- N00024-16-R-2211
About this file
Attachment 2 - Work Boat Medium Specification Response Matrix
View the file
Other files
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix
| ATTACHMENT 2 |
| CNIC WORK BOAT MEDIUM |
| SPECIFICATION RESPONSE MATRIX |
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.
2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.
3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft |
[Maximum of 15.0 ft]
| 070-1 | Enter Beam at waterline: xx.x ft |
| 070-1 | Enter Height, Keel to Fixed Structure: xx.x ft |
| 070-1 | Enter Height, Keel to Moveable Structure: xx.x ft |
| 070-1 | Enter Height, Waterline to Fixed Structure or Equipment: xx.x – xx.x ft |
[Maximum of 13 ft]
| 070-1 | Enter Total Installed Fuel Capacity: xxx gallons |
| 070-1 | Enter Full Load Weight (as defined in Section 070-3): xx,xxx lbs incl x% margin |
| 070-1 | Enter Longitudinal Center of Gravity (LCG) in Full Load: xx.x ft forward of transom/keel intersect |
| 070-1 | Enter Vertical Center of Gravity (VCG) in Full Load: |
xx.x ft above reference baseline 070-1 Enter Full Load Draft to lowest extremity: x.x ft at Full Load [Maximum of 8 feet]
| 070-1 | Enter Full Load Draft to center of propulsor: x.x ft |
| 070-1 | Enter Full Load Freeboard (Forward): x.x ft |
| 070-1 | Enter Full Load Freeboard (Aft): x.x ft |
[Maximum of 24 inches] 070-1 Enter Bollard Thrust: x.x ft [Minimum of 14,000 lbs]
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water |
| 070-9 | Enter list of submitted drawings describing the proposed boat. |
| 080-2 | Proposed Delivery Schedule - Verify Attachment 4 submitted in Vol I. |
| 083-1 | Initial Spares List - Verify Attachment 3 submitted in Vol II for each configuration. |
| 100 | General Requirements for Hull Structure - Verify that a description of the builder's welding qualification program is included in Vol I. |
| 233-1 | Inboard Diesel Engines - Verify speed and static bollard pull required in Spec can be achieved on proposed boat using specified engines. |
| All | CNIC Work Boat Medium Specification - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. |
| Offeror's Notes: |
&12RFP N00024-16-R-2211
Example Response
| ATTACHMENT 2 |
| CNIC WORK BOAT MEDIUM |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) | 30.0 ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft | 29.0 ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft | 15.0 ft |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 1,800 rpm |
| 070-3 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| 083-1 | Initial Spares List - Verify Attachment 2 submitted in Vol II for each configuration. | Verified |
| 223-1 | Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines. | Verified |
| All | CNIC Work Boat Medium Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 313-3: Exception: Builder has no local distributor for Blue Seas voltmeters. Builder proposes a BrandX Model xxx123 voltmeter in lieu of a Blue Seas voltmeter specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Builder has used BrandX voltmeters in 300 boats in similar applications. |
File details come from the government source that posted it. Updated .