ATT 5 HQMC Approved Products List APL.pdf

M95494-22-R-0006 HQMC Law Enforcement Program (MCLEP) Approved Products List (APL)

# Item Description Graphic

Police Duty Belt

Suggested:

Item Name - Belt, Utility, Police Duty

The Police Duty Belt shall be 2-1/4 inch wide and interoperable with approved Police Inner Belt (optional) and Police Duty Belt Keepers and shall maintain the approved Police Holster and accessory gear in a stable tactically ready configuration. Shall include a quick release buckle or fasten around waist by hook-and-loop closure on both ends. Shall attach to the approved Police Inner Belt (optional) by means of 1 inch wide strip of hook-and-loop hook. Shall have a free sliding keeper that holds the belt tip in place. Shall be adjustable for height and angle to accommodate different body types. Shall be adjustable for height below/above the belt (with different length mounts or attachments), and angle adjustable (with spacers) to slant the approved Police Holster slightly in or away from the user’s hips. The construction shall be natural leather completely wrapped in a synthetic nonwoven fabric of nylon fiber that is composed of approximately 50% nylon and 50% Polyurethane that is made in a continuous staple fiber. The finish shall be Plain Black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the Police Duty Belt construction or function.

Police Inner Belt (Optional)

Suggested:

Item Name - Buckleless Belt, Under (AKA: Inner)

NSN - 8465-01-625-2342

The Police Inner Belt shall be 1 ½ inch wide with 1 ½ inch wide strip of hook-and-loop pile lining extending the full length of the belt. Mated for use with approved Police Duty Belt and interoperable with all approved accessories. The Police Inner Belt shall have a section of hook-and-loop hook on inside that mates with hook-and-loop pile on outside to fasten around the entire circumference of the waist. The Police Inner Belt shall be buckleless. Hook-and-loop pile, when worn on the outside, shall fasten to hook-and-loop hook lined approved Police Duty Belt. The finish shall be Plain Black Matte on one side. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the utility inner belt construction or function. The Police Inner Belt is an optional item.

Police Duty Belt Keepers

Suggested:

Item Name - Belt Keepers, Police Duty

The Police Duty Belt Keepers shall act as an anchoring system to provide a stable, stationary foundation for all approved accessories on the approved Police Duty Belt. Shall have four (4) keepers on the approved Police Duty Belt to provide a balanced system. Dimensions shall be 7 7/8 inch long by 1 inch wide. Shall have snaps that are concealed or hidden on the inside of the tips of the flaps, with no hardware that is exposed on the outside of the keeper. The finish shall be Plain Black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the Police Duty Belt Keeper construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Holster

Suggested:

Item Name - Holster, Double Retention Police

NSN -TBD

Same form, fit, function as Safariland MHH-HOL-BLK-RH-1007/MHH-HOL-BLK-LH-1008 (Approved Program of Record)

# Item Description Graphic

Police Magazine Pouch

Suggested:

Item Name - Pouch, Magazine, Slim Line

The Police Magazine Pouch shall be interoperable with the approved Police Duty Belt and ammunition magazines issued from Marine Corps inventory. Shall carry at least two (2) magazines in two (2) separate holders in a stable, tactically ready configuration with water drain holes. The magazines shall be positioned to ride “face out” instead of “side out”in order to conserve space. Shall allow a 5/8 inch space between each pouch for easy grip and be cut low for access to magazines by the individual wearing the system. The Police Magazine Pouch shall slide on to the approved Police Duty Belt and shall ride in the vertical or horizontal position. Shall have a tension screw located between the two pouches for magazine retention adjustment. The finish shall be Plain Black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the pouch construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Handcuff Pouch

Suggested:

Item Name - Pouch, Handcuff, Tapered

NSN - 8465-01-625-9205

The Police Handcuff Pouch shall be interoperable with the approved Police Duty Belt and approved Police Handcuffs. Shall be 5 inches by 2 inches by 4 inches. It shall carry one pair of approved Police Handcuffs in a stable, tactically ready configuration. The Police Handcuffs shall ride with locking mechanism at the bottom.

Flap closure device snaps over approved Police Handcuffs to hold them securely in place. Female regular snap on tip of flap mates with a regular snap on pouch body. Snaps shall be hidden and shall have a finger cut-out in front to facilitate removal of the approved Police Handcuffs. Shall slide on to the approved Police Duty Belt and ride in the vertical position. Shall include a water drain hole. The finish shall be Plain Black Matte.

Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the pouch construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Oleoresin Capsicum (OC) Spray Carrier

Suggested:

Item Name - Carrier, OC/Pepper Spray 3.0 oz

MK-4

NSN - 8465-01-626-0368

The Police OC Spray Carrier shall be interoperable with approved Police Duty Belt and OC Spray issued from Marine Corps inventory. Shall carry the OC Spray canister in a stable, tactically ready configuration. The OC Pepper Spray canister shall sit with top in upright position. Shall have flap closure device snaps over canisters to hold it firmly in place. Female regular snap on tip of flap mates with male regular snap on carrier body and snaps shall be hidden. Open side area at top facilitates removal of canister. Shall slide on to the approved Police Duty Belt and ride in vertical position with a closed bottom. Shall include a water drain hole. The finish shall be Plain Black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the carrier construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Radio Carrier

Suggested:

Item Name - Carrier, Radio, Open Top with Swivel Belt

The Police Radio Carrier shall be interoperable with approved Police Duty Belt and radio issued from Marine Corps inventory. Shall carry one police radio in a stable, tactically ready configuration. Shall allow the radio to sit in upright position. Shall have an adjustable bungee cord tie-down with a snap closure. Shall slide onto the approved Police Duty Belt and shall ride in a vertical position. Finish shall be of Plain black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the carrier construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

# Item Description Graphic

Police Surgical Glove Pouch

Suggested:

Item Name - Pouch, Surgical Glove

The Police Surgical Glove Pouch shall be interoperable with approved Police Duty Belt and approved Surgical Gloves. Shall carry at least three pairs of approved Surgical Gloves. Shall have a snap or hook-and-loop closure and reinforced belt slot. The finish shall be Plain Black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the pouch construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Human Electro- Muscular Incapacitation (HEMI) Device Holster

Suggested:

Item Name - Holster, Synthetic, Electronic Discharge Weapon (EDW) (i.e. TASER X- 26)

The Police HEMI Device Holster shall be interoperable with approved Police Duty Belt and HEMI Device issued from Marine Corps inventory. The holster retention system hood adapted for the HEMI Device shall include a detachable belt loop to permit the user the ability to exchange the Police HEMI Device Holster without having to remove other items from their approved Police Duty Belt. Shall be adjustable to an array of different degrees of cant, including FBI, cross draw, and any other extreme angles to fit the user’s needs.

Finish shall be of Plain Black Matte. Surface shall block absorption of blood-borne or other biological fluid pathogens and also be able to be cleaned/disinfected/decontaminated by an end-user using commercial cleaning chemicals, without damage to the holster construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Baton Holder

Suggested:

Item Name - Holder, Baton, Monadnock

The Police Baton Holder shall be interoperable with approved Police Duty Belt and approved Police Expandable Baton. The Police Baton Holder shall be constructed of hard thermoplastics and stainless steel and allow the approved Police Expandable Baton to rotate from 0-45 degrees. When the approved Police Expandable Baton is in the stowed position, the Police Baton Holder shall provide proper standoff distance to ensure that there is no interference with the body of the user. Proper standoff distance shall accommodate for use with optional end cap accessories. Finish shall be of Plain Black Matte. Surface shall block absorption of blood-borne or other biological fluid pathogens and also be able to be cleaned/disinfected/decontaminated by an end-user using commercial cleaning chemicals, without damage to the holder construction or function.

Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Flashlight Holster

Suggested:

Item Name - Flashlight , Holster, Synthetic

The Police Flashlight Holster shall be interoperable with approved Police Duty Belt and approved Police Flashlight. Shall store the approved Police Flashlight in either a head-up or head-down position. Shall be constructed of a rigid polymer material that will protect the approved Police Flashlight from impact. Shall include an "open mouth" for fumble free reholstering. The finish shall be Plain Black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/disinfected/decontaminated by an end-user using commercial cleaning chemicals without damage to the holster construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

# Item Description Graphic

Police Flashlight

Suggested:

Item Name - Flashlight, Police

NSN -TBD

The Police Flashlight shall be high efficiency LED. It shall provide two light output levels: a pre-focused 400 lumen beam, and a 15 lumen low output setting that allows for extended runtime per charge. It shall have a switch that allows for various modes and on/off. It shall be constructed of lightweight, durable materials that can withstand normal daily use. The Police Flashlight shall be rechargeable and can accommodate (optional) filters of various colors. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/disinfected/decontaminated by an end-user using commercial cleaning chemicals without damage to the flashlight construction or function. The Police Flashlight color shall be black and it must be compatible with approved Police Flashlight Holster.

# Item Description Graphic

Police Key Ring Holder

Suggested:

Item Name - Holder, Key Ring

NSN -TBD

The Police Key Ring Holder must be interoperable with the approved Police Duty Belt. The Police Key Ring Holder must be capable of holding standard key rings and features a wraparound closure that holds keys securely and silently. The finish shall be Plain Black Matte. Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/ disinfected/ decontaminated by an end-user using commercial cleaning chemicals without damage to the holder construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

Police Gloves

Suggested:

Item Name - Gloves, Police

NSN -TBD

The Police Gloves must meet ASTM F1342, Standard Test Method for Protective Clothing Material Resistance to Puncture and must be NIJ Certified. The color shall be black.

Oleoresin Capsicum (OC) Canister (Live) - MK-4, 3.0 oz

Must be issued via Marine Corps Inventory only.

Human Electro- Muscular Incapacitation (HEMI) Device

Must be the Taser 2013 Model X26P.

Police Expandable Baton

Suggested:

Item Name - Baton, Expandable, Auto-Lock

NSN -TBD

The Police Expandable Baton must be expandable to 21" - 23" and must include a hard rubber tip. The Police Expandable Baton shall include a "auto lock" feature that ensures it will stay open and locked while striking, blocking or jabbing. Shall accommodate optional end cap accessories (i.e. wedge or Hindi). The Police Expandable Baton will collapse when a button or similar mechanism is engaged. It must open using both passive and high profile techniques. The Police Expandable Baton shall be constructed of steel and include a firm foam grip handle. Must be compatible with approved Police Baton Holder.

Police Equipment Bag

Suggested:

Item Name - Carrier, Equipment, Police

NSN -TBD

The Police Equipment Bag shall contain a spacious interior compartment with adjustable dividers, a removable rigid bottom, multiple zippered cargo pockets and pen/pencil pockets. The exterior shall include a combination of multiple zippered cargo pockets, flip-top pockets and/or open-top pockets. The Police Equipment Bag shall be constructed of water-resistant nylon with PVC backing and include a removable nylon web shoulder strap.

The color shall be black.

Police Citation Holder

Suggested:

Item Name - Holder, Citation, Police

NSN -TBD

The Police Citation Holder shall include a top opening storage compartment with 1 inch capacity. The exterior must include a high capacity clip with swivel bar and a latch to ensure the holder will stay closed. It shall include a hinged writing plate that prevents write-through on unused forms. The Police Citation Holder must accommodate a form size up to 6 inches by 11 inches. It shall be constructed of aluminum or other equivalent solid material that can withstand normal daily use.

# Item Description Graphic

Police Clipboard

Suggested:

Item Name - Clipboard, Police

NSN -TBD

The Police Clipboard must be no less than 13 inches by 9 inches by 1-1/2 inch. The Police Clipboard interior shall contain two areas of storage space and include an inside magnet to secure items. The clipboard interior shall contain storage for securing pens/pencils. The Police Clipboard exterior shall include a rubber non-skid bottom and a high capacity spring clip on top. It must include a latch to ensure the compartments stay closed.

The Police Clipboard exterior shall be constructed of aluminum or other equivalent solid material that can withstand normal daily use.

# Item Description Graphic

Police Handcuffs

Suggested:

Item Name - Handcuffs, Police

NSN -TBD

The Police Handcuffs shall be interoperable with the approved Police Handcuff Pouch. The Police Handcuffs shall be constructed of heavy duty steel, with 18 tooth, 3-retaining bar system for security. The Police Handcuffs should have positive swing-through action with built-in backloading for fast handcuffing. Shall have reinforced steel swivels for added strength and durability. Must meet NIJ Standard 0307.01 and be NIJ Certified.

Surgical Gloves

Suggested:

Item Name - Gloves, Surgical, Police

NSN -TBD

Surgical Gloves must be latex and powder free. The surgical gloves will be designed for single-use only and must be ambidextrous.

Police Reflective Safety Vest

Suggested:

Item Name - Vest, Safety, Police

NSN -TBD

The Police Reflective Safety Vest shall be lightweight and meet ANSI/ISEA207-2006 American National Standards for HI-VIS Public Safety Vests . It shall include a 5-point tear-away construction and dual zipper/hook-and-loop front closure. The back shall be long for extra coverage and mesh for comfort. The Police Reflective Safety Vest shall have dual sizing for comfort and include dual shoulder heavy-duty mic holders. It shall include a clear plastic badge holder. The Police Reflective Safety Vest shall be flame retardant. The Police Reflective Safety Vest must be blue or yellow and be marked, clearly, with "POLICE" on both the front and back. It must be able to be cleaned/disinfected/decontaminated by an end-user using commercial cleaning chemicals without damage to the vest construction or function.

Police Replacement Cartridge Holder for Human Electro- Muscular Incapacitation (HEMI) Device

Suggested:

Item Name - Holder, Cartridge, Electronic Discharge Weapon (EDW) (i.e. TASER X- 26)

NSN -TBD

The Police Replacement Cartridge Holder shall be interoperable with approved Police Duty Belt and Police HEMI Device Replacement Cartridges issued from Marine Corps Inventory. It shall contain a flap closure device that is secured by either a snap or hook-and-loop closure. The finish shall be Plain Black Matte.

Surface shall block absorption of blood-borne pathogens and also be able to be cleaned/disinfected/decontaminated by an end-user using commercial cleaning chemicals without damage to the holder construction or function. Must be of the same material and look as the approved Police Holster and other accessories on the approved Police Duty Belt.

# Item Description Graphic

Police Whistle

Suggested:

Item Name - Whistle, Police

NSN -TBD

The Police Whistle must be constructed of plastic. Shall include a lanyard.

APL