Attachment_6_E7901_EO-TK_SL3_Final.pdf

MARCH 2013 SL-3-09863B

PCN 123 098631 00

TAMCN E79012B

MARINE CORPS STOCKLIST

COMPONENTS LIST

FOR

TOOL KIT, ELECTRO-OPTICAL

GOVTK-2171

NSN 5180-01-576-6593

SUPERSEDURE NOTICE: THIS PUBLICATION SUPERSEDES SL-3-09863B, DATED OCTOBER 2010.

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES

AND THEIR CONTRACTORS ONLY. FOR OFFICIAL USE FOR ADMINISTRATIVE OR OPERATIONAL

PURPOSES ONLY AS OF 29 MARCH 2013. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO: COMMANDANT OF THE MARINE CORPS (ARD), WASHINGTON, DC 20380-0001.

DESTRUCTION NOTICE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENTS.

FOR OFFICIAL USE ONLY

ii

DEPARTMENT OF THE NAVY

Headquarters, U.S. Marine Corps

Washington, D.C. 20380-0001

29 March 2013

1. Marine Corps Components Stocklist, SL-3-09863B, TAMCN E79012B, is effective upon receipt.

2. This publication supersedes SL-3-09863B, dated 30 October 2010.

3. Safety issues related to the information contained in this manual should be reported to the Marine Corps Systems Command Safety Office at MCSC_Safety@usmc.mil. All significant safety hazards that have the potential to affect other commands and require widespread dissemination shall be reported via a Hazard Report per MCO P5102.1B.

BY DIRECTION OF THE COMMANDANT OF THE MARINE CORPS

OFFICIAL

W. D. JOHNSON

Product Manager Test, Measurement, and Diagnostic Equipment Marine Corps Systems Command

DISTRIBUTION: EDO

mailto:MCSC_Safety@usmc.mil

SL-3-09863B Marine Corps Stocklist SL-3-09863B iii

PREFACE

SCOPE

1. This publication lists all components and accessories for collection-type supply items, such as major combinations, systems, groups, outfits, kits, sets or assortments. The components to be issued with the end item are identified under the heading of “SUPPLY SYSTEM RESPONSIBILITY” and when required, under the heading “COLLATERAL MATERIEL.” End items requiring collateral materiel are governed by whether the end item is an initial or replacement issue. After initial issue, as directed by the Program Manager, the Commander, Marine Corps Logistics Base, 814 Radford Boulevard, Albany, Georgia 31704-1128, will direct whether subsequent issue of the end item is with or without collateral materiel. Those items listed under the “USING UNIT RESPONSIBILITY” heading, are to be requisitioned separately through the supply system, when applicable. Using Units are also responsible for requisitioning the required publications to support the end item identified by the ID number shown on the cover of the SL-3. The end item will be complete when the total quantity of items, as applicable, shown in the SL-3, are on hand.

LIST OF COMPONENTS

2. This listing comprises the major portion of this publication. The data, arranged in columnar form, present the information needed to identify the item and determine its type of issue.

3. Item Number (Column 1). This column specifies a number assigned to each item as it appears in the list.

Numbers are assigned in sequence and are for reference purposes only.

4. National Stock Number (Column 2). This column furnishes the National Stock Number (NSN) assigned to the item.

5. Figure-Key/Reference Designator (Column 3). This column contains alphabetical and/or numerical designators for referencing an individual component or item to a graphic/illustration. The absence of a designator in the Fig-Key/Ref Des column indicates there is no graphic/illustration for the item identified in column 5.

6. Model (Column 4). This column indicates in alphabetical code the specific application of components, or assemblies, when more than one model of the end item is contained in this publication.

7. Item Identification (Column 5). This column provides the official catalogued item name and description listed under the heading of either “SUPPLY SYSTEM RESPONSIBILITY”, “COLLATERAL MATERIEL”, or “USING UNIT RESPONSIBILITY” in alphabetical order. The common name can be listed in parethesis following the official catalogued item name before the colon. If required, sub-headers can be inserted under the above listed headers for arrangement of compontents, in alphabetical order under the sub-head, to allow for better inventory. See paragraphs 12, 13, and 14.

8. Unit of Measure (Column 6). This column gives the measurement standard of each item. It may or may not be the same as the unit of issue. For example, the unit of issue of a certain wire is coil but only four (4) feet are required for the end item. Therefore, the unit of measure shown will not be used for requisitioning purposes. For the proper unit of issue and other required management data, refer to the applicable Management Data List (MDL) when requisitioning.

9. Quantity Used in Unit (Column 7). This column lists the total quantity of an item, according to the unit of measure required for full functional operation of the end item.

10. Periodic Inventory (Column 8). This column provides space for recording inventory results in accordance with MCO P4790.2_, TM 4700-15/1_, and MCO P4400.150_, or as directed by the Unit Commander.

11. Using Unit Remarks (Column 9). This column provides space for remarks pertaining to the data recorded in the Inventory column (Column 8) when an inventory is conducted.

SL-3-09863B Marine Corps Stocklist SL-3-09863B iv

SUPPLY SUPPORT CATEGORIES

12. Supply System Responsibility (SSR). A list, in alphabetical sequence, of items that are furnished with and must be turned in with the end item. Any item requiring replacement is the responsibility of the holding organization or using unit.

13. Collateral Materiel. A list, in alphabetical sequence, of items that are supplied with the initial issue of the end item and are retained by the unit. Not all collateral materiel is cataloged for NSN assignment. The “9999-xx-xxx-xxxx” NSN shown under the heading of “COLLATERAL MATERIEL” (if applicable) is for control within the distribution system only, and is not authorized for requisitioning purposes.

14. Using Unit Responsibility (UUR). A list, in alphabetical sequence, of items that will not be issued with the end item. They must be requisitioned, as required, through the supply system by the using unit or holding organization.

SUSTAINMENT (DEPOT) LEVEL OF MAINTENANCE REHABILITATION PROGRAM

15. Major items returned under this program will be evacuated under the provision(s) of the applicable Marine Corps Order(s) with the items listed under Supply System Responsibility. Rebuild and replacement under the sustainment (depot) level of maintenance rehabilitation program will be limited to these items only. Those items under the heading “COLLATERAL MATERIEL” and using unit items shall be held by using organizations for application to the replacement end item.

CHANGES

16. Changes to this publication will be kept current by downloading the current edition from the Marine Corps Publications Website or via the SL-1-2/1-3 Resources Website located at https://portal.logcom.usmc.mil/sites/pubs.

REQUISITIONING OF PUBLICATIONS

17. This SL-3 is Electronic Distribution Only (EDO) and can only be downloaded from the Marine Corps Technical Publications Website or SL-1-2/1-3 Resources Website located at https://portal.logcom.usmc.mil/sites/pubs.

PUBLICATIONS FEEDBACK

18. Submit notice of discrepancies or suggested changes on a NAVMC 10772. The NAVMC may be submitted using either of the following:

a. The preferred method of submittal is using https://portal.logcom.usmc.mil/sites/pubs URL which will allow direct entry to the LOGCOM SharePoint Pubs site (LOGCOM SharePoint access and CAC required) where the form (Part I or Part II) can be filled out and submitted to the NAVMC database. Problems or questions regarding the NAVMC 10772 program should be reported by calling DSN 567-7628 or DSN 567-5017 (Commercial number is

(229) 639-7628 or (229) 639-5017).

b. The alternate method of submittal does not require a Common Access Card (CAC) to access the form. Click on https://navalforms.documentservices.dla.mil/web/public/home, click “FORMS”, select the “Keyword Search” button, enter “10772” in the Search Criteria Box. Under “type” click on download page button. Click on PDF icon.

Enter user data in the appropriate fields. Must have users contact information block filled with Unit address and telephone number. Click on the “Envelope” icon in the tool bar. Select “Send Copy”, click on “OK”. When the PDF document is created, an Outlook Email screen will open with the .PDF as an attachment. On the TO: line type SMB.LOG.Tech.Pubs.fct@usmc.mil. In the body of the email, type any additional information you wish to provide.

Click “SEND”.

https://portal.logcom.usmc.mil/sites/pubs https://portal.logcom.usmc.mil/sites/pubs https://portal.logcom.usmc.mil/sites/pubs https://navalforms.documentservices.dla.mil/web/public/home mailto:SMB.LOG.Tech.Pubs.fct@usmc.mil

SL-3-09863B Marine Corps Stocklist SL-3-09863B v

MISCELLANEOUS

19. For full information concerning the Marine Corps Stocklist publications, see the current edition of MCO P5215.17_, The Marine Corps Technical Publications System.

20. Items without NSNs assigned should be requisitioned by part number and Commercial and Government Entity (CAGE) code, or drawing number and CAGE code. When NSNs are assigned to these items, changes to this publication will be published.

SPECIAL NOTES

21. The format of this SL-3 will deviate from the aforementioned format in that no Reference Designator/Figure- Key or Model columns will be utilized. Therefore, “Item Identification” will be column 3, “Unit of Measure” will be column 4, “Quantity Used in Unit” will be column 5, “Periodic Inventory” will be column 6, and “Using Unit “Remarks” will be column 7. Additionally, items will be listed in sequence within a certain area of the end item, e.g. drawer, section, box, bag, etc. For those instances in which items are not in any logical sequence, items will be listed alphabetically.

22. The “Item Number” given in column 1 for each component shall correspond to the call-out number given the component on the facing figure page. In those instances where no figure is provided for an item, that information will be so stated in the Item Identification column.

23. Pictures in this document are current at the document’s publications date. Changes in contract or suppliers may cause replacement items to differ in color, configuration, or packaging. Changes to reflect these differences will be made in the next edition of this publication.

24. Using units should refer to the SL-1-2 website https://mcsd4.ala.usmc.mil/MCSD/SL/SL1-2/ and requisition or download the required publications to support the items is this SL-3. The ID number for this system is 09863B. Use this ID number to search for publications on this site.

25. Table 1 listed on page vii lists tool warranties associated with each SL-3 Item #. Items listed with MFG/STD have a manufacturer/vendor’s standard warranty which generally spans between 30 and 90 days. Warranty tool replacement claims will be submitted through the PM SKOT website per SI 11668A-OR/1. See paragraph 26 of this publication for further information on submitting warranty claims. Units submitting warranty claims for items less than lifetime will scan and upload receipt information documenting when the item was received/receipted for by the unit so the vendor may determine if the item being submitted for warranty replacement falls within the warranty period for that item. That information may also be faxed to the fax numbers given in paragraph 26. Notification will be supplied by the vendor to the requesting unit via the PM SKOT website.

26. For warranty information and warranty tool replacement go through the PM SKOT website at https://tools.army.mil; email usarmy.detroit.tacom.mbx.ilsc-questions@mail.mil; phone 1-877-476-7568/DSN 793- 5909/fax commercial 309-782-6701/DSN 793-6701. To purchase replacement tools, the following three options are available.

a. Order tools through the PM SKOT website given above. The following information is required: (1) DoDAAC;

(2) Organization’s TAC 1 address; (3) NSN of end item tool is SL-3 to; (4) Date of tool kit manufacture/receipt by unit. (NOTE: For DoDAAC information, go to https//www.daas.dla.mil/daasinq/ .) To request access, new users must read and accept the authorizing conditions by clicking the “I Accept” button. CAC information will be saved on the website’s database. New users will then be prompted to provide additional information which may include the user’s email address, phone number, organization, title and rank, and DoDACC/RUC. In the DoDAAC/RUC field, new users must enter the DoDAAC/RUC supplied by and agreed upon by Unit Supply/SMU Fiscal. This is the data that allows the vendor to ship correctly. This needs to be the exact shipping address required to control commercial deliveries and reconcile receipts. Because the website recognizes your CAC as being registered to the Marine Corps, the website will provide a listing of only the Marine Corps SKO. Review SI 11668A-OR/1, Tool Warranty/Replacement Instructions for Using Army PM-SKOT Website, for full instructions on warranty vi replacement and purchase replacement of tools using this website. THIS IS THE PREFERRED METHOD OF ORDERING REPLACEMENT TOOLS. It ensures you get an exact replacement tool of same quality as original issue, and will fit the custom cut-out, socket rail, etc., configured into these kits.

b. Order tools via GSA Advantage. The GSA Advantage website is https://www.gsaadvantage.gov/advantage/main/start_page.do. Ordering is done by part number. These replacement tools will be exact replacement items.

c. Order tools by NSN through the Supply System. Items ordered by NSN may or may not be exact replacement items that fit the custom cut –outs.

27. The MULTIMETER, NSN 6625-01-336-3372, item number 279 of this SL-3, is issued as Collateral Material, a one-time, free issue item, and should be accounted for and managed as a TAMCN H7030 asset with the receiving unit of initial issue. It is not a managed component of theTK-2171. Local units can carry the multimeter in the TK- 2171, but again, it is not an SL-3 component of the TK-2171, shall not be managed and/or accounted for as an SL-3 component of the TK-2171, shall not be sent with the end item in case of asset transfer, and shall be managed as a TAMCN H7030 asset. If units do not require or wish to maintain the item, they should contact their unit Maintenance Management Officer/Chief as to re-distribution or disposal of the item.

SL-3-09863B Marine Corps Stocklist SL-3-09863B vii

Table 1. Tool Warranties

Item# Warranty Item# Warranty Item# Warranty Item# Warranty Item# Warranty

1 LIFE 57 LIFE 113 LIFE 169 LIFE 225 MFG/STD

2 5 YEAR 58 LIFE 114 LIFE 170 LIFE 226 MFG/STD

3 5 YEAR 59 LIFE 115 LIFE 171 LIFE 227 MFG/STD

4 5 YEAR 60 LIFE 116 LIFE 172 LIFE 228 MFG/STD

5 5 YEAR 61 LIFE 117 LIFE 173 LIFE 229 MFG/STD

6 5 YEAR 62 LIFE 118 LIFE 174 LIFE 230 MFG/STD

7 5 YEAR 63 LIFE 119 LIFE 175 LIFE 231 MFG/STD

8 5 YEAR 64 LIFE 120 LIFE 176 LIFE 232 MFG/STD

9 5 YEAR 65 LIFE 121 LIFE 177 LIFE 233 MFG/STD

10 1 YEAR 66 LIFE 122 LIFE 178 LIFE 234 MFG/STD

11 MFG/STD 67 LIFE 123 LIFE 179 LIFE 235 MFG/STD

12 1 YEAR 68 LIFE 124 LIFE 180 LIFE 236 MFG/STD

13 MFG/STD 69 MFG/STD 125 LIFE 181 LIFE 237 MFG/STD

14 LIFE 70 MFG/STD 126 LIFE 182 LIFE 238 MFG/STD

15 71 MFG/STD 127 LIFE 183 MFG/LTD 239 MFG/STD

16 LIFE 72 MFG/STD 128 LIFE 184 MFG/LTD 240 MFG/STD

17 LIFE 73 MFG/STD 129 LIFE 185 MFG/STD 241 MFG/STD

18 LIFE 74 MFG/STD 130 LIFE 186 MFG/STD 242 MFG/STD

19 MFG/STD 75 MFG/STD 131 LIFE 187 MFG/STD 243 MFG/STD

20 MFG/STD 76 1 YEAR 132 LIFE 188 MFG/STD 244 MFG/STD

21 1 YEAR 77 LIFE 133 LIFE 189 MFG/STD 245 MFG/STD

22 1 YEAR 78 LIFE 134 LIFE 190 MFG/STD 246 MFG/STD

23 1 YEAR 79 LIFE 135 LIFE 191 MFG/STD 247 MFG/STD

24 1 YEAR 80 LIFE 136 LIFE 192 MFG/STD 248 MFG/STD

25 1 YEAR 81 LIFE 137 LIFE 193 MFG/STD 249 MFG/STD

26 1 YEAR 82 LIFE 138 LIFE 194 MFG/STD 250 MFG/STD

27 1 YEAR 83 LIFE 139 LIFE 195 MFG/STD 251 MFG/STD

28 1 YEAR 84 LIFE 140 LIFE 196 MFG/STD 252 MFG/STD

29 1 YEAR 85 LIFE 141 LIFE 197 MFG/LTD 253 MFG/STD

30 1 YEAR 86 LIFE 142 LIFE 198 LIFE 254 MFG/STD

31 1 YEAR 87 LIFE 143 LIFE 199 MFG/STD 255 MFG/STD

32 1 YEAR 88 LIFE 144 LIFE 200 MFG/STD 256 MFG/STD

33 1 YEAR 89 LIFE 145 LIFE 201 MFG/STD 257 MFG/STD

34 LIFE 90 LIFE 146 LIFE 202 MFG/LTD 258 MFG/STD

35 1 YEAR 91 LIFE 147 LIFE 203 MFG/LTD 259 MFG/STD

36 LIFE 92 LIFE 148 LIFE 204 MFG/STD 260 MFG/STD

37 LIFE 93 LIFE 149 LIFE 205 LIFE 261 MFG/STD

38 LIFE 94 LIFE 150 LIFE 206 LIFE 262 MFG/STD

39 LIFE 95 LIFE 151 LIFE 207 LIFE 263 MFG/STD

40 LIFE 96 LIFE 152 MFG/STD 208 LIFE 264 MFG/STD

41 LIFE 97 LIFE 153 1 YEAR 209 LIFE 265 5 YEAR

42 LIFE 98 LIFE 154 LIFE 210 LIFE 266 MFG/STD

43 LIFE 99 LIFE 155 LIFE 211 LIFE 267 MFG/STD

44 LIFE 100 LIFE 156 LIFE 212 MFG/STD 268 LIFE

45 LIFE 101 LIFE 157 LIFE 213 MFG/STD 269 LIFE

46 MFG/STD 102 LIFE 158 LIFE 214 MFG/STD 270 LIFE

47 MFG/STD 103 LIFE 159 LIFE 215 MFG/STD 271 LIFE

48 LIFE 104 LIFE 160 LIFE 216 MFG/STD 272 LIFE

49 LIFE 105 LIFE 161 LIFE 217 MFG/STD 273 LIFE

50 LIFE 106 LIFE 162 LIFE 218 MFG/STD 274 LIFE

51 LIFE 107 LIFE 163 LIFE 219 MFG/STD 275 MFG/STD

52 LIFE 108 LIFE 164 LIFE 220 MFG/STD 276 MFG/STD

53 LIFE 109 LIFE 165 LIFE 221 MFG/STD 277 MFG/STD

54 LIFE 110 LIFE 166 LIFE 222 MFG/STD 278 MFG/STD

55 LIFE 111 LIFE 167 LIFE 223 MFG/STD 279 LIFE

56 LIFE 112 LIFE 168 LIFE 224 MFG/STD

SL-3-09863B Marine Corps Stocklist SL-3-09863B viii

5180-01-576-6593 TOOL KIT, ELECTRO-OPTICAL EA

TECHNICAL DATA

FUNCTIONAL DESCRIPTION: The TK-2171 Tool Kit, E7901, is a general-purpose field and repair kit comprising various hand tools and accessories to aid in the repair of electronic and mechanical equipment.

PHYSICAL CHARACTERITICS:

Length……………………………………….. 23.75 in.

Width………………………………………... 18.00 in.

Height……………………………………….. 14.75 in.

Weight………………………………………. 83 lbs.

Figure 1. Tool Kit, Electro-Optical, GOVTK-2171

SL-3-09863B Marine Corps Stocklist SL-3-09863B ix/(x blank )

Figure 2. Tool Kit, Electro-Optical, GOVTK-2171(Drawer Layout)

Top Tray & Insert

Drawer #1

Drawer #2

Drawer #3

Drawer #4

Drawer #5

Drawer #6

Drawer #7

SL-3-09863B Marine Corps Stocklist SL-3-09863B

THIS PAGE INTENTIONALLY BLANK

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 3. Case and Foam Inserts

6 7

8 9

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

ITEM

NO.

NSN

ITEM IDENTIFICATION

U/M

QTY

IN

UNIT

PERIODIC

INVENTORY

(See paragraph 10 in Preface.)

USING

REMARKS

SUPPLY SYSTEM

RESPONSIBILITY

CASE AND FOAM INSERTS

CASE, Storage: blk, 7 drawers, wheeled;

PN 16-642 CAGE 08292 EA 1

2 INSERT, Foam, Precut: top tray;

PN TK2171F9 CAGE 08292 EA 1

INSERT, Foam, Precut: drawer #1;

PN TK2171F1 CAGE 08292 EA 1

INSERT, Foam, Precut: drawer #2;

PN TK2171F2 CAGE 08292 EA 1

5 INSERT, Foam, Precut: drawer #3;

PN TK2171F3 CAGE 08292 EA 1

6 INSERT, Foam, Precut: drawer #4;

PN TK1271F4 CAGE 08292 EA 1

7 INSERT, Foam, Precut: drawer #5;

PN TK2171F5 CAGE 08292 EA 1

8 INSERT, Foam, Precut: drawer # 6;

PN TK2171F6 CAGE 08292 EA 1

9 INSERT, Foam, Precut: drawer #7;

PN TK2171F7 CAGE 08292 EA 1

Inventory Legend: C- Complete I-Incomplete U-Unserviceable

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 4. Top Tray Components

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

TOP TRAY COMPONENTS

(LOOSE)

POUCH, Storage: Nylon zipper bag, 7 in. x 12.5 in.; PN 03-8195

CAGE 97200

EA 1

11 6625-01-168-2044

WORK STATION KIT, Electrostatic Control: (includes ESD mat, gnd cords, wrist strap, stored inside item

#10); PN 600X800 CAGE 62764

SE 1

TOP TRAY COMPONENTS

(IN FOAM )

12 5140-00-329-4306 POUCH, Mechanic’s tool: cloth, 12 in. x 6 in. x 6 in.; PN 50J8016

CAGE 80049

13 8115-00-663-0212 BOX, Small parts: plstc, 7-1/8 in. x 4-1/16 in. x 1-1/2 in., 3 to 18 cmpt;

PN C4146G CAGE 4DRU2

14 6230-00-163-1856 FLASHLIGHT: incandescent, yellow, 2 AA btry, water proof;

PN 6230-00-163-1856 CAGE 64067

Note: Multimeter called out in collateral material section.

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 5. Drawer #1 Components (sheet 1 of 2)

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

DRAWER #1 COMPONENTS

15 5120-00-595-8651 ALIGNMENT TOOL, Elec. Equip:

0.187 in. end, 2-5/8 in. lg;

PN TL138B CAGE 80063

16 5120-01-138-7488 ALIGNMENT TOOL, Elect. Equip:

1/32 in. tip, 7-1/32 in. lg; PN 8195

CAGE 72653

17 5120-00-288-7781 ALIGNMENT TOOL, Elect. Equip:

1/8 in. end, 6-1/2 in. lg;

PN 5120-00-288-7781 CAGE 80244

18 FILE, Hand: round; 8 in. blade, handle; PN 21715H CAGE 96508 EA 1

19 5110-01-563-9473 FILE, Hand: flat; 8 in. blade, perm handle; PN 21748H CAGE 65LN0 EA 1

20 5110-00-204-2685 FILE SET: 12 pc w/pouch; Swiss needle; PN 5110-00-204-2685 CAGE 80244; c/o

21 1 – FILE, Hand: warding, 6-1/4 in. lg;

PN 80036 CAGE 0M92X EA

22 5110-00-156-0062 1 – FILE, Hand: equalling, 6-1/4 in.

lg; PN 37982 CAGE 65LN0 EA

23 5110-00-239-3281 1 – FILE, Hand: joint, 6-1/4 in. lg;

PN 38038 CAGE 65LN0 EA

24 5110-00-242-0127 1 – FILE, Hand: barrette, 6-1/4 in. lg;

PN 5110-00-242-0127

CAGE 80244

EA

25 5110-00-242-0146 1 – FILE, Hand: crossing, 6-1/4 in. lg;

PN 37870 CAGE 65LN0 EA

26 5110-00-156-0065 1 – FILE, Hand: knife, 6-1/4 in. lg;

PN A-A-2446 CAGE 58536 EA

27 5110-00-239-3269 1 – FILE, Hand: halfround, 6-1/4 in.

lg; PN 37814 CAGE 65LN0 EA

28 5110-00-245-4165 1 – FILE, Hand: marking, 6-1/4 in. lg;

PN 38094 CAGE 65LN0 EA

29 5110-00-239-7614 1 – FILE, Hand: slitting, 6-1/4 in. lg;

PN 38066 CAGE 65LN0 EA

30 5110-00-239-7590 1 – FILE, Hand: three square, 6-1/4

in. lg; PN 5110-00-239-7590

31 5110-00-245-4177 1 – FILE, Hand: round, 6-1/4 in. lg;

PN 37786 CAGE 65LN0 EA

32 5110-00-239-7602 1 – FILE, Hand: square, 6-1/4 in. lg;

PN 37926 CAGE 65LN0 EA

33 5120-00-629-6258 FINGER, Mechanical: flexible; 24 in.;

PN PD5120-00-629-6258

34 5110-00-263-0342 HANDLE, File: used with item #20;

PN 5110-00-263-0342 CAGE 80244 EA 1

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 5. Drawer # 1 Components (sheet 2 of 2)

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

35 5120-00-221-1536 KNIFE, Putty: PN 5120-00-221-1536

CAGE 80244 EA 1

36 5120-00-177-6870 MIRROR, Inspection: 7/8 in. rnd mirror; 18 in. extension; PN A-2T

CAGE 11676

37 5120-00-293-0048 PLIERS, Retaining Ring: .038 in., 90 deg tip; 6-7/16 in. lg; PN 68-003

CAGE 03914

38 5120-01-056-7444 PLIERS, Retaining Ring: .047 in., 0 deg tip; 6-7/16 in. lg; PN 68-004

PLIERS, Retaining Ring: .047 in., 45 deg tip; 6-7/16 in. lg; PN 68-005

PLIERS, Retaining Ring: .070 in., 0 deg tip; 7-7/16 in. lg; PN 68-007

41 5120-01-336-5536 RETRIEVING TOOL, Magnetic:

extends 16-3/4 in. to 26-3/4 in., 2 lb lift; PN 70-933 CAGE 08292

42 5210-00-971-8827 RULE, Machinist’s: 1/32 in. and 1/64

in. grads, 6 in. lg;

PN 5210-00-971-8827 CAGE 80244

43 5120-00-293-0149

TWEEZERS, Craftsmans: reverse action; anti- magnetic;

PN PD5120-00-293-0149

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 6. Drawer #2 Components (sheet 1 of 2)

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

DRAWER #2 COMPONENTS

44 5120-01-428-7870 AWL, Scratch: 3-1/8 in. blade, mini;

PN SG3ASABR CAGE 55719 EA 1

45 5110-00-240-7666 SCRAPER, Bearing: flat, end cutting; 1/16 in. x 3/8 in. x 5 in.;

PN 5110-00-240-7666 CAGE 80244

46 5110-00-596-9369 SCRAPER, Bearing: three square; 4

in. blade; PN PD5110-00-596-9639

47 PROBE SET, Precision: 7pc, PN 97-0700 CAGE 08292; c/o SE 1

1 – PROBE, Precision: hook/steel;

PN 55-1962 CAGE 89750 EA

49 1 – PROBE, Precision: hook/triple;

PN 55-1963 CAGE 89750 EA

1 – PROBE, Precision: triple bend

#17; PN 55-1755 CAGE 89750 EA

51 1 – PROBE, Precision: single bend

#6; PN 55-1751 CAGE 89750 EA

52 1 – PROBE, Precision: straight tip

#1; PN 55-1750 CAGE 89750 EA

1 – PROBE, Precision: double bend tip; PN 55-1752

CAGE 89750

54 1 – PROBE, Precision: hook tip

#23; PN 55-1754 CAGE 89750 EA

55 5120-00-240-6082 PUNCH, Drive Pin: 1/16 in. pt., 4-1/8

in. lg; PN 31034 CAGE 3JKA4 EA 1

56 5120-00-242-3435 PUNCH, Drive Pin: 3/32 in. pt., 4-1/2

in. lg; PN 5120-00-242-3435

57 5120-00-242-5966 PUNCH, Drive Pin: 1/8 in. pt., 4-3/4

in. lg; PN 31038 CAGE 3JKA4 EA 1

58 5120-00-240-6104 PUNCH, Drive Pin: 5/32 in. pt., 5 in.

lg; PN 31040 CAGE 3JKA4 EA 1

59 5120-00-293-0791 PUNCH, Drive Pin: 3/16 in. pt., 5-1/4

in. lg; PN 75E CAGE 3JKA4 EA 1

60 5120-00-293-0792 PUNCH, Drive Pin: 7/32 in. pt., 5-1/2

in. lg; PN 31044 CAGE 3JKA4 EA 1

61 5120-00-240-6083 PUNCH, Drive Pin: 1/4 in. pt., 5-3/4

in. lg; PN 70-122 CAGE 03914 EA 1

62 5120-00-293-0793 PUNCH, Drive Pin: 5/16 in. pt., 6-1/4

in. lg; PN 75H CAGE 3JKA4 EA 1

63 5120-00-223-0989 PUNCH, Starter: 3/8 in. pt., 6-1/2

in. lg; PN 34007 CAGE 66080 EA 1

64 5120-01-434-9837 PUNCH, Drift Pin: 3/8 in. hex, 5/32

in. pt.; PN 70-191 CAGE 08292 EA 1

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 6. Drawer #2 Components (sheet 2 of 2)

68 69

70 72 71 73 74

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

65 5120-01-434-9586 PUNCH, Center, Solid: 5/16 in. hex shank; 5 in. lg; PN 70-233

CAGE 08292

66 SCREWDRIVER: Phillips, #2 tip, 8

in. blade; PN 66-158 CAGE 03914 EA 1

67 5120-01-511-0991 SCREWDRIVER, Flat Tip: 3/16 in.

tip, 6 in. blade; PN 66-267

SCREWDRIVER, Precision: slotted;

1.5 mm tip; PN 511062B

CAGE 3JKA4

2.0 mm tip; PN 611078B

2.5 mm tip; PN 611094B

3.0 mm tip; PN 611125B

SCREWDRIVER, Precision:

Phillips; #0 tip; PN 612010B

Phillips; #00 tip; PN 612020B

Phillips; #1 tip; PN 712001B

WRENCH SET, Spanner: fully adj from 1/2 in. to 7 in., 9 pc;

PN NT70-751 CAGE 97197

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 7. Drawer #3 Components

85 86

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

DRAWER #3 COMPONENTS

PLIERS, Chain Nose: 6 in. lg, cushion grip; PN 67-255

77 5120-01-601-5166 PLIERS, Slip Joint: 3/4 in. to 2-1/2 in.

cap; 9-3/4 in. lg; PN 67-852

78 5110-01-500-9582 PLIERS, Diagonal Cutting: cushion grip; 6-1/2 in. lg; PN 67-161

79 5110-00-965-0974 PLIERS, Diagonal: semi-flush; 4 in lg, cushion grip; PN 84CG

CAGE 65LN0

PLIERS, Flush Cut: angled tip cutter, cushion grip; 4-1/2 in. lg;

PN 67-640 CAGE 08292

PLIERS, Linemans: high leverage, cushion grip; 9-1/4 in. lg; PN 67-069

PLIERS, Needle Nose: serrated jaws, vinyl grip; 5 in. lg; PN 67-624

83 5120-01-435-0653 PLIERS, Slip Joint: 5 pos, 6-1/2 in.

lg; PN 67-777 CAGE 08292 EA 1

84 5120-01-435-0668 PLIERS, Slip Joint: 7 pos, 10 in. lg;

PN 67-779 CAGE 08292 EA 1

85 5120-00-305-2306 WIRE TWISTER, Plier: safety, RH twist; 9 in. lg; PN 1W CAGE 85688 EA 1

86 5120-00-494-1910 WRENCH, Plier: vice grip, 1-5/8 in.

jaw cap, 7 in. lg; PN 7WR

CAGE 1JU00

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 8. Drawer #4 Components (sheet 1 of 4)

89 90

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

DRAWER #4 COMPONENTS

87 5120-01-599-2004 ADAPTER, Socket Wrench: 1/4 in.

(f), 3/8 in. (m); PN 10-952

88 5120-00-227-8095 ADAPTER, Socket Wrench: 3/8 in.

(f), 1/4 in. (m); PN 11-951

89 5120-01-397-2966 EXTENSION, Socket Wrench: 1/4

in. drive; 2 in. lg; PN 10-921

90 5120-01-397-2965

in. drive; 6 in. lg; PN 10-923

in. drive; 10 in. lg; PN 10-924

92 5120-01-397-3303 EXTENSION, Socket Wrench: 3/8

in. drive; 3 in. lg; PN 11-922

in. drive; 6 in. lg; PN 11-923

94 5120-01-397-3305

in. drive; 8 in. lg; PN 11-925

95 5210-01-368-4549 GAUGE, Thickness: 25 blades, sizes .0015 in. thru .025 in.; PN 161

96 5120-01-397-2963 HANDLE, Socket Wrench: breaker bar; 1/4 in. dr, flx; 5-3/4 in. lg;

PN 10-918 CAGE 08292

97 5120-01-601-5171 HANDLE, Socket Wrench: breaker bar; 3/8 in. dr, flx; 8-1/2 in. lg;

PN 11-918 CAGE 08292

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 8. Drawer #4 Components (sheet 2 of 4)

99 100 103 102 101

110 109

111 105

106 108 107

113 114 115 116 117 118

SL-3-09863B Marine Corps Stocklist SL-3-09863B

(See paragraph

REMARKS

98 5120-01-397-3058 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 3/16 in.; PN 10-106

99 5120-01-397-3064 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 7/32 in.; PN 10-107

100 5120-01-397-3060 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 1/4 in.; PN 10-108 CAGE 08292 EA 1

101 5120-01-397-3061 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 9/32 in.; PN 10-109

102 5120-01-397-3152

12 pt, 5/16 in.; PN 10-110

103 5120-01-397-3153

12 pt, 11/32 in.; PN 10-111

104 5120-01-397-3154 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 3/8 in.; PN 10-112 CAGE 08292 EA 1

105 5120-01-397-3275

12 pt, 3/16 in.; PN 10-306

106 5120-01-397-3276

12 pt, 7/32 in.; PN 10-307

107 5120-01-397-3282 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 1/4 in.; PN 10-308 CAGE 08292 EA 1

108 5120-01-397-3283 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 9/32 in.; PN 10-309

109 5120-01-397-3279

12 pt, 5/16 in.; PN 10-310

110 5120-01-397-3280

12 pt, 11/32 in.; PN 10-311

111 5120-01-397-3281 SOCKET, Socket Wrench: 1/4 in. dr, 12 pt, 3/8 in.; PN 10-312 CAGE 08292 EA 1

112 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 3/8 in.; PN 11-012 CAGE 08292 EA 1

113 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 7/16 in.; PN 11-014 CAGE 08292 EA 1

114 5120-01-335-0317 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 1/2 in.; PN 52-1116 CAGE 08292 EA 1

115 5120-01-335-0919 SOCKET, Socket Wrench: 3/8 in. dr, 6

pt. 9/16 in.; PN 52-1118 CAGE 08292 EA 1

116 5120-00-237-4973 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt.; 5/8 in.; PN 45120 CAGE 2K880 EA 1

117 SOCKET, Socket Wrench: 3/8 in.

dr, 11/16 in.; PN 11-022 CAGE 08292 EA 1

118 5120-01-366-8359 SOCKET, Socket Wrench: 3/8 in. dr, 3/4 in.; PN X246R CAGE 76377 EA 1

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 8. Drawer #4 Components (sheet 3 of 4)

135 136 137

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

119 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 3/8 in.; PN 11-212 CAGE 08292 EA 1

SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 7/16 in.; PN 11-214

121 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 1/2 in.; PN 11-216 CAGE 08292 EA 1

SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 9/16 in.; PN 11-218

123 5120-01-578-3618 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 5/8 in.; PN 11-220 CAGE 08292 EA 1

SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 11/16 in.; PN 11-222

125 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 3/4 in.; PN 11-224 CAGE 08292 EA 1

126 5120-01-348-9110 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 7mm; PN FSM71 CAGE 55719 EA 1

127 5120-01-348-9111 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 8mm; PN FSM81 CAGE 55719 EA 1

128 5120-01-348-9112 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 9mm; PN FSM91 CAGE 55719 EA 1

129 5120-01-348-9113

6 pt, 10mm; PN FSM101

CAGE 55719

130 5120-01-348-9114

6 pt, 11mm; PN FSM111

131 5120-01-348-9115

6 pt, 12mm; PN FSM121

132 5120-01-348-9116

6 pt, 13mm; PN FSM131

133 5120-01-348-9117

6 pt, 14mm; PN FSM141

134 5120-01-348-9118 SOCKET, Socket Wrench: 3/8 in. dr, 6 pt, 15mm; PN 38-015 CAGE 08292 EA 1

135 5120-00-308-3809 TOOL, Valve Core and Stem:

PN GA143C CAGE 55719 EA 1

136 5120-01-599-4519 UNIVERSAL JOINT, Socket Wrench:

1/4 in. dr; PN 10-947

137 5120-01-399-9617 UNIVERSAL JOINT, Socket Wrench: 3/8 in. dr; PN 11-947

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 8. Drawer #4 Components (sheet 4 of 4)

140 141

144 147 145 146

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

138 5120-00-240-5330 WRENCH, Adjustable: 4 in. lg, 1/2

in. jaw capacity; PN AD4

139 5120-00-240-5328 WRENCH, Adjustable: 8 in. lg; 1-1/8

in. jaw capacity; PN 28-458

140 5120-01-147-7881 WRENCH, Open and Box: 12 pt, midget, 7/32 in.; PN 66-114

141 5120-01-287-5978 midget, 15/64 in.; PN 27-904

142 5120-01-430-8394 midget, 1/4 in.; PN 66-116

143 5120-01-430-8397 midget, 9/32 in.; PN 66-118

144 5120-01-430-8395 midget, 5/16 in.; PN 66-120

145 5120-01-287-5982 midget, 11/32in.; PN 307IE800

CAGE 30239

146 5120-01-430-8401 midget, 3/8 in.; PN 66-124

147 5120-01-430-7804 midget, 7/16 in.; PN 66128

WRENCH, Ratchet: 1/4 in. drive, sealed head; PN 10-992

149 5120-01-575-6750 HANDLE, Socket Wrench: 3/8 in.

drive, sealed head; PN 11-992

150 5120-01-175-7134 WRENCH, Spanner: adj. face, .070

in. pin dia., 4 in. lg; PN 5007644

CAGE 54490

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 9. Drawer #5 Components (sheet 1 of 3)

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

DRAWER #5 COMPONENTS

151 5120-01-472-6922 EXTENSION, Screwdriver Bit:

1/4 in.; PN 99PAV CAGE 65LN0 EA 1

152 1240-00-536-5557 EYEPIECE ASSEMBLY, Optical:

dioptometer; PN 7680631

CAGE 19200

153 5120-01-395-5444 KEY SET, Socket Head Screw: hex, ball end, 13 pc, L-type, w/holder;

PN 56190 CAGE 1DJ82; c/o

154 5120-01-573-4376 1 – KEY, Socket Head Screw:

3/8 in.; PN 59324 CAGE 08292 EA

155 5120-01-578-7465 1 – KEY, Socket head Screw: ball end 5/16 in.; PN 59322

156 5120-01-578-7463 1 – KEY, Socket Head Screw:

ball end 1/4 in.; PN 59320

157 5120-01-578-7459 ball end 7/32 in.; PN 59318

158 5120-01-573-4384 ball end 3/16 in.; PN 59316

159 5120-01-578-7451 ball end 5/32 in.; PN 59314

160 5120-01-578-7448 ball end 9/64 in.; PN 59312

161 5120-01-578-7444 ball end 1/8 in.; PN 59310

162 5120-01-578-7438 ball end 7/64 in.; PN 59308

163 5120-01-578-7433 ball end 3/32 in.; PN 59306

164 5120-01-578-7429 ball end 5/64 in.; PN 59304

165 5120-01-578-7426 ball end 1/16 in.; PN 59302

166 5120-01-578-7423 ball end .050 in.; PN 59300

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 9. Drawer #5 Components (sheet 2 of 3)

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

167 5120-01-542-3840

KEY SET, Socket Head Screw: hex, ball end, 13 pc Metric, 1.5mm to 10mm sizes, w/holder; PN 9-46755

CAGE 53800

10mm; PN 59116

169 1 – KEY, Socket Head Screw:

9mm; PN 59115 CAGE 08292 EA

170 5120-01-045-4893 1 – KEY, Socket Head Screw:

8mm; PN 57130 CAGE 08292 EA

171 1 – KEY, Socket Head Screw:

7mm; PN 59113 CAGE 08292 EA

172 5120-00-900-9345 1 – KEY, Socket Head Screw:

6mm; PN 57128 CAGE 08292 EA

173 5120-01-570-9080 1 – KEY, Socket Head Screw:

5.5mm; PN 59111 CAGE 08292 EA

174 5120-00-900-9344

5mm; PN 57126 CAGE 08292 EA

175 1 – KEY, Socket Head Screw:

4.5mm; PN 59109 CAGE 08292 EA

176 5120-01-045-4889 1 – KEY, Socket Head Screw:

4mm; PN 57124 CAGE 08292 EA

177 5120-01-045-4888 1 – KEY, Socket Head Screw:

3mm; PN 57122 CAGE 08292 EA

178 5120-01-045-4887 1 – KEY, Socket Head Screw:

2.5mm; PN 57120 CAGE 08292 EA

179 5120-01-045-4886 1 – KEY, Socket Head Screw:

2mm; PN 57118 CAGE 08292 EA

180 1 – KEY, Socket Head Screw:

1.5mm; PN 59100 CAGE 08292 EA

181 5110-01-434-9799 STRIPPER-CRIMPER, Wire, Hand:

strips 8 to 22 AWG, 8-1/2 in. lg;

PN 67-905 CAGE 08292

SCREWDRIVER, Torque: adj., 20 to 100 in. oz., 1/4 in. dr; PN 64-002

SCREWDRIVER, Torque: adj., 6 to 35 in. lbs, 1/4 in. dr; PN 64-005

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 9. Drawer #5 Components (sheet 3 of 3)

193 195

196 197

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

184 5120-01-018-8956 KEY SET, Socket Head Screw: ball end, 11 pc; PN 5120-01-018-8956 CAGE 80244; c/o

185 5120-01-018-8975 1 – BIT, Screwdriver: hex, ball end, .050 in. tip, 4 in. lg;

PN 9920BP CAGE 65LN0

186 5120-01-018-8976 end, 1/16 in. tip, 4 in. lg;

PN 9921BP CAGE 65LN0

187 5120-01-018-8977 end, 5/64 in. tip, 4 in. lg;

PN 9922BP CAGE 65LN0

188 5120-01-018-8978 end, 3/32 in. tip, 4 in. lg;

PN 9923BP CAGE 65LN0

189 5120-01-018-8979 end, 7/64 in. tip, 4 in. lg;

PN 99764BP CAGE 65LN0

190 5120-01-018-8980 end, 1/8 in. tip, 4 in. lg;

PN 9924BP CAGE 65LN0

191 5120-01-018-8981 end, 9/64 in. tip, 4 in. lg;

PN 99964BP CAGE 65LN0

192 5120-01-018-8982 end, 5/32 in. tip, 4 in. lg;

PN 9925BP CAGE 65LN0

193 5120-01-020-2888 end, 3/16 in. tip, 4 in. lg;

PN 9926BP CAGE 65LN0

194 5120-00-152-8991 1 – EXTENSION, Screwdriver Bit: 4 in. lg; PN 99X5

195 5120-00-056-3935 1 – HANDLE, Screwdriver:

PN 991 CAGE 65LN0 EA

196 5110-01-336-5727 SCISSOR, Electricians’: 5-1/4 in. lg;

PN 175-E5 CAGE 65LN0 EA 1

197 5110-01-434-9787 STRIPPER, Wire/Cutter: strips 10 to 18 AWG; 5 in. lg; PN 67-895

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 10. Drawer #6 Components (sheet 1 of 4)

206 205

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

DRAWER #6 COMPONENTS

198 3439-01-043-9053 BRUSH, Flux: 3/8 in. w x 3/4 in.

trim, 5-3/4 in. lg; PN 244B106

CAGE 3P7B2

8020-00-262-9099

BRUSH, Lacquering: camel hair, 5/32 in dia. x 11/16 in. trim;

PN A-A3191 CAGE 58536

200 3439-00-132-1331 DESOLDERING TOOL: ESD safe;

PN DS017 CAGE 21325 EA 1

201 5120-00-012-4013 FORCEPS, Soldering: seizer, straight nose, 5.5 in. lg; PN 758TW054

CAGE 30239

202 5120-01-369-9999 FORCEPS, Nonsurgical: seizer, curved nose, 5.5 in. lg;

PN 5120-01-369-9999 CAGE 80244

203 3439-00-866-6258 SOLDERING IRON, Electric: 60W;

PN W60P-3 CAGE 65LN0 EA 1

SCREWDRIVER HANDLE SET: 6

pc; PN 66-581 CAGE 08292; c/o SE 1

1 – HANDLE, Screwdriver:

ratcheting 5-5/8 in. lg;

PN 66-582 CAGE 08292

1 – HANDLE, Screwdriver:

ratcheting 6 in. lg; PN 66-583

207 1 – SHANK: 3-1/4 in. lg;

PN 66-584 CAGE 08292 EA

208 1 – SHANK: 5-1/2 in. lg;

PN 66-585 CAGE 08292 EA

209 1 – SHANK: 9-1/2 in lg;

PN 66-586 CAGE 08292 EA

210 1 – SHANK: 5-1/2 in lg;

PN 66-587 CAGE 08292 EA

211 3439-01-163-6113 TIP, Electric Soldering Iron: 1/16 in.

tip, 700 deg F; PN CT5A7

212 3439-01-022-0310 TIP, Electric Soldering Iron: 1/8 in.

tip, 800 deg F; PN CT5C8

CAGE 97049

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 10. Drawer #6 Components (sheet 2 of 4)

221 222 224 226 223 225

229 232 231 230

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

DRAWER #6 COMPONENTS

INSERT BIT SET

213 BIT, Screwdriver: torx, T6;

PN GTC411006 CAGE 08292 EA 1

214 BIT, Screwdriver: torx, T7;

PN GTC411007 CAGE 08292 EA 1

215 BIT, Screwdriver: torx, T8;

PN GTC411008 CAGE 08292 EA 1

216 5120-01-368-2369 BIT, Screwdriver: torx, T9;

PN 41 1009 CAGE 08292 EA 1

217 5120-01-368-2370 BIT, Screwdriver: torx, T10;

PN 41 1010 CAGE 08292 EA 1

218 5120-01-368-2371 BIT, Screwdriver: torx, T15;

PN 41 1015 CAGE 08292 EA 1

219 5120-01-368-2372 BIT, Screwdriver: torx, T20;

PN 41 1020 CAGE 08292 EA 1

220 5120-01-369-2083 BIT, Screwdriver: torx, T25;

PN 41 1025 CAGE 08292 EA 1

221 5120-01-368-2373 BIT, Screwdriver: torx, T27;

PN 41 1027 CAGE 08292 EA 1

222 5120-01-368-2374 BIT, Screwdriver: torx, T30;

PN 41 1030 CAGE 08292 EA 1

223 5120-01-368-2375 BIT, Screwdriver: torx, T40;

PN 41 1040 CAGE 08292 EA 1

224 5120-01-368-2376 BIT, Screwdriver: Phillips #0;

PN 41 1900 CAGE 08292 EA 1

225 5120-01-368-2377 BIT, Screwdriver: Phillips #1;

PN 41 1901 CAGE 08292 EA 1

226 5120-01-369-2084 BIT, Screwdriver: Phillips #2;

PN 41 1902 CAGE 08292 EA 1

227 5120-01-368-2378 BIT, Screwdriver: Phillips #3;

PN 41 1903 CAGE 08292 EA 1

BIT, Screwdriver: slotted; .109 in.

wide, .024 in. thick tip;

PN GTC411919 CAGE 08292

BIT, Screwdriver: slotted; .125 in.

wide, .026 in. thick tip;

PN GTC411921 CAGE 08292

BIT, Screwdriver: slotted; .140 in.

wide, .028 in. thick tip;

PN GTC411922 CAGE 08292

BIT, Screwdriver: slotted; .156 in.

wide, .032 in. thick tip;

PN GTC411923 CAGE 08292

232 5120-01-369-1913 BIT, Screwdriver: slotted; .218 in.

wide, .036 in. thick tip; PN 41 1925

233 5120-01-368-2380 BIT, Screwdriver: slotted; .250 in.

wide, .040 in. thick tip; PN 41 1926

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 10. Drawer #6 Components (sheet 3 of 4)

238 240 239

245 247 246

249 250 251 252 253 254

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

BIT, Screwdriver: slotted; .281 in.

wide, .046 in. thick tip;

PN GTC411927 CAGE 08292

BIT, Screwdriver: slotted; .281 in.

wide, .050 in. thick tip;

PN GTC411929 CAGE 08292

BIT, Screwdriver: slotted; .355 in.

wide, .056 in. thick tip;

PN GTC411930 CAGE 08292

237 BIT, Screwdriver: square tip, #0;

PN GTC411960 CAGE 08292 EA 1

238 5120-01-368-2384 BIT, Screwdriver: square tip, #1;

PN 411961 CAGE 08292 EA 1

239 5120-01-369-1914 BIT, Screwdriver: square tip, #2;

PN 411962 CAGE 08292 EA 1

240 5120-01-368-2385 BIT, Screwdriver: square tip, #3;

PN 411963 CAGE 08292 EA 1

241 BIT, Screwdriver: hex ball end; 5/64 in;

PN GTC413005 CAGE 08292 EA 1

242 BIT, Screwdriver: hex ball end; 3/32 in;

PN GTC413006 CAGE 08292 EA 1

243 BIT, Screwdriver: hex ball end; 7/64 in;

PN GTC413007 CAGE 08292 EA 1

244 BIT, Screwdriver: hex ball end; 1/8 in.;

PN GTC413008 CAGE 08292 EA 1

245 BIT, Screwdriver: hex ball end; 9/64 in;

PN GTC413009 CAGE 08292 EA 1

246 BIT, Screwdriver: hex ball end; 5/32 in;

PN GTC413010 CAGE 08292 EA 1

247 BIT, Screwdriver: hex ball end; 3/16 in;

PN GTC413012 CAGE 08292 EA 1

248 BIT, Screwdriver: hex ball end; 7/32 in;

PN GTC413014 CAGE 08292 EA 1

249 BIT, Screwdriver: hex ball end; 1/4 in.;

PN GTC413016 CAGE 08292 EA 1

250 BIT, Screwdriver: hex ball end; 5/16 in;

PN GTC413020 CAGE 08292 EA 1

251 BIT, Screwdriver: hex ball end; 3/8 in.;

PN GTC413022 CAGE 08292 EA 1

252 BIT, Screwdriver: hex ball end; 1/2 in.;

PN GTC413024 CAGE 08292 EA 1

253 BIT, Screwdriver: hex ball end; 2mm;

PN GTC415101 CAGE 08292 EA 1

254 BIT, Screwdriver: hex ball end; 2.5mm;

PN GTC415102 CAGE 08292 EA 1

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 10. Drawer #6 Components (sheet 4 of 4)

258 261 260 259

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

255 BIT, Screwdriver: hex ball end; 3mm;

PN GTC415103 CAGE 08292 EA 1

256 BIT, Screwdriver: hex bal end; 4mm;

PN GTC415104 CAGE 08292 EA 1

257 BIT, Screwdriver: hex ball end; 5mm;

PN GTC415105 CAGE 08292 EA 1

258 BIT, Screwdriver: hex ball end; 6mm;

PN GTC415106 CAGE 08292 EA 1

259 BIT, Screwdriver: hex ball end; 8mm;

PN GTC415108 CAGE 08292 EA 1

BIT, Screwdriver: hex ball end;

10mm; PN GTC415110

BIT, Screwdriver: hex ball end;

12mm; PN GTC415112

262 BOX, Storage: plastic, for foam insert;

PN C-4226-0 CAGE 97779 EA 1

263 5130-01-368-2368 HOLDER, Screwdriver Bit: 1/4 in.

hex dr. w/ring retainer, 2-7/8 in. lg;

PN 41 0105 CAGE 08292

264 INSERT, Foam: for insert bit storage;

PN TK2171F8 CAGE 08292 EA 1

SOCKET, Screwdriver Bit Holder:

for 1/4 in. dr, hex bits, magnetic;

PN GTC410201 CAGE 08292

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 11. Drawer #7 and UURI Components (sheet 1 of 2)

271 270 272

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

266 6140-01-329-8144 BATTERY, Storage: rechargeable;

2V; PN 48-11-0100 CAGE 40817 EA 1

267 5120-01-218-4360 FACE, Hammer Inserted: brown, soft tip; 1-1/2 in. dia;

PN 5120-01-218-4360 CAGE 80244

268 5120-01-395-8113 FACE, Hammer, Inserted: red, medium tip; 1-1/2 in. dia face;

PN 15M CAGE 76732

269 5120-01-395-8118 FACE, Hammer, Inserted: cream, medium hard tip, 1-1/2 in. dia face;

PN 15SN CAGE 76732

270 5120-01-395-8126 FACE, Hammer, Inserted: brass tip;

1-1/2 in. dia face; PN 15B

CAGE 76732

271 5120-01-395-8121 FACE, Hammer Inserted: black, hard tip; 1-1/2 in. dia; PN 15H

272 5120-01-395-8124 FACE, Hammer, Inserted: hardened steel tip; 1-1/2 in. dia; PN 15ST

HAMMER, Quick-Change:

interchangeable heads, dead blow;

PN 3356 CAGE 08292

SL-3-09863B Marine Corps Stocklist SL-3-09863B

Figure 11. Drawer #7 and UURI Components (sheet 2 of 2)

SL-3-09863B Marine Corps Stocklist SL-3-09863B DATE OF PUBLICATION: 29 March 2013 SERIAL NUMBER OF END ITEM:___________ END ITEM NOMENCLATURE: Tool Kit, Electro-Optical INVENTORY SHEET: ____of____

(See paragraph

REMARKS

274 3439-01-379-7096 HOLDER, Soldering Iron: PN PH60

CAGE 636D0 EA 1

275 5130-01-306-8384 SCREWDRIVER, Cordless: two speed, reversing; w/btry charger;

PN 6546-6 CAGE 4AAF4; c/o

276 6140-01-329-8144 1 – BATTERY, Rechargeable: 2V;

PN 48-11-0100 CAGE 40817 EA

277 6130-01-532-6256 1 – CHARGER, Battery:

PN 48-59-0300 CAGE 40817 EA

278 5120-01-334-9858

WRENCH, Strap: urethane covered strap; 1-1/2 in. to 5 in. pipe cap;

12 in. lg. handle; PN BLPSTWR6

COLLATERAL MATERIAL

MULTIMETER: digital; TAMCN H7030, for inventory see SL-3-09869A; (See Special Note

28); PN 77-3/BN CAGE 89536

USING UNIT RESPONSIBILITY

NOTE: Using units should refer to the SL-1-2 and requisition the required publications to support the item identified by the ID number shown on the cover of this SL-3.

280 6135-00-985-7845 BATTERY, Nonrechargeable: AA Alkaline, used for flashlight;

PN 15A CAGE 80204

PG AR

281 5140-01-586-3669 CART, Tool: PN MCAT0900

CAGE 08292 EA AR

SL-3-09863B Marine Corps Stocklist SL-3-09863B

INVENTORIED BY

(Signature of person conducting inventory)

SUPERVISED BY

(Signature of person certifying/supervising inventory)

DATE

(Date inventory completed)