(4)_Small_Arms_Tool_Kit_Stock_List.pdf

OCTOBER 2005 SL-3-10919A

PCN 123 109190 00

TAMCN E79007G

MARINE CORPS STOCKLIST

COMPONENTS LIST

FOR

TOOL KIT, SMALL ARMS

NSN 5180-01-504-5663

THIS PUBLICATION IS REQUIRED FOR OFFICIAL USE OR FOR ADMINISTRATIVE OR OPERATIONAL PURPOSES ONLY.

DISTRIBUTION IS LIMITED TO US GOVERNMENT AGENCIES AND AUTHORIZED CONTRACTORS ONLY. OTHER REQUESTS FOR THIS DOCUMENT MUST BE REFERRED TO: COMMANDING GENERAL, MARINE CORPS SYSTEMS

COMMAND (CESS-TMDE), 2200 LESTER STREET, QUANTICO, VA 22134-6050.

SL-3-10919A Marine Corps Stocklist SL-3-10919A iii

PREFACE

SCOPE

1. This publication lists all components and accessories for collection-type supply items, such as major combinations, systems, groups, outfits, kits, sets or assortments. The components to be issued with the end item are identified under the heading of “SUPPLY SYSTEM RESPONSIBILITY” and when required under the heading “COLLATERAL MATERIEL.” End items requiring collateral materiel are governed by whether the end item is initial or replacement issue. The Commander, Marine Corps Logistics Bases, 814 Radford Boulevard, Albany, Georgia 31704-1128. will direct whether the issue of the end item is with collateral materiel or without collateral materiel. Those items listed under “USING UNIT RESPONSIBILITY” heading are to be requisitioned separately through the supply system when applicable. Using Units are also responsible for requisitioning the required publications to support the end item identified by the ID number shown on the cover of this SL-3. The end item will be complete when the total quantity of items, as applicable , shown in the SL-3 is on hand.

LIST OF COMPONENTS

2. This listing comprises the major portion of this publication. The data, arranged in columnar form, presents the information needed to identify the item and determine its type of issue.

3. Item Number (Column 1). This column specifies a number assigned to each item as it appears in the list.

Numbers are assigned in sequence and are for reference purposes only.

4. Stock Number (Column 2). This column furnishe s the National Stock Number (NSN) assigned to the item.

5. Figure-Key/Reference Designator (Column 3). This column contains alphabetical and/or numerical designators for referencing individual component or item to an illustration. The absence of a reference designator indicates there is no illustration for the item.

6. Model (Column 4). This column indicates in alphabetical code the specific application of components, or assemblies when more than one model of the end item is contained in this publication.

7. Item Identification (Column 5). This column provides the item name and description listed under the heading of either “SUPPLY SYSTEM RESPONSIBILITY”, “COLLATERAL MATERIEL” or “USING UNIT RESPONSIBILITY”.

(See paragraphs 12, 13, and 14.)

8. Unit of Measure (Column 6). This column gives the measurement standard of each item. It may or may not be the same as the unit of issue. For example, the unit of issue of a certain wire is coil but only 4 feet are required for the end item. Therefore, the unit of measure shown will not get used for requisitioning purposes. For the proper unit of issue and other required management data, refer to the applicable Management Data List (ML) when requisitioning.

9. Quantity Used in Unit (Column 7). This column lists the total quantity of an item, according to the unit of measure, required for full functional operation of the end item.

10. Date (Column 8). This column is to be used for inventories and may be reproduced locally by the user as required. The user may indicate in the first column the date of the first inventory.

11. Remarks (Column 9). This column is used for recording miscellaneous notes during the inventory or for Special Notes.

SUPPLY SUPPORT CATEGORIES

12. Supply System Responsibility. A list, in alphabetical sequence, of items that are furnished with and must be turned in with the end item. Any item requiring replacement is the responsibility of the holding organization or using unit.

SL-3-10919A Marine Corps Stocklist SL-3-10919A iv

13. Collateral Materiel. A list, in alphabetical sequence, of items that are supplied with the initial issue of the end item and are retained by the unit. The “9999-00-000-0000” NSN shown under the heading of “COLLATERAL MATERIEL,” is for control within the distribution system only, and is not authorized for requisitioning purposes.

14. Using Unit Responsibility. A list, in alphabetical sequence, of items that will not be issued with the end item.

They must be requisitioned, as required, through the supply system by the using unit or holding organization.

DEPOT LEVEL OF MAINTENANCE REHABILITATION PROGRAM

15. Major items returned under this program will be evacuated under the provision(s) of the applicable Marine Corps Order(s) with the items listed under Supply System Responsibility. Rebuild and replacement under a depot level of maintenance rehabilitation program will be limited to these items only. Those items under the heading “COLLATERAL MATERIEL”, and using unit items shall be held by using organizations for application to the replacement end items.

CHANGES

16. Changes to this publication will be kept current by downloading the current edition from the Marine Corps Publications Website located at https://pubs.ala.usmc.mil/front.htm. This website may also be accessed via the SL-1-2/1-3 Resources Website located at https://mcsd4.ala.usmc.mil/MCSD/SL/.

REQUISITIONING OF PUBLICATIONS

17. This SL-3 is Electronic Distribution Only (EDO) and can only be downloaded from the Marine Corps Publications Website located at https://pubs.ala.usmc.mil/front.htmor SL-1-2/1-3 Resources Website located at https://mcsd4.ala.usmc.mil/MCSD/SL/.

PUBLICATIONS FEEDBACK

18. You can help improve this manual. If you find any mistakes or if you know of a way to improve the procedures, please let us know. Identify deficiencies in TMs and notify appropriate TM sponsor by submission of NAVMC 10772 (Recommended Changes to Publications/Logistics-Maintenance Data Coding). The NAVMC 10772 may be submitted via the internet using web site https://pubs.ala.usmc.mil/navmc, scrolling down to the NAVMC

10772 Tracking Program and following the instructions provided, or by electronic mail to mailto:mbmatcommarlogbases@logcom.usmc.mil, or by mailing paper copy to Commander, Marine Corps Systems Command, Attn: Assistant Commander Acquisition and Logistics (LOG/TP), 814 Radford Boulevard, Suite 20343, Albany, Georgia 31704-0343. If submitting a paper copy NAVMC 10772, it should be submitted to the above address in all cases except when the authentication sheet in the technical publication directs otherwise.

MISCELLANEOUS

19. For full information concerning the Marine Corps Stocklist publications, see the current edition of MCO P5215.17, The Marine Corps Technical Publications System.

SPECIAL NOTE

20. Items without NSN’s assigned should be requisitioned by part number and CAGE code (see special note 21).

When NSN’s are assigned, changes to this SL-3 will be published.

21. CAGE Code and Part Number information. The Commercial and Government Entity (CAGE) Code is a five position codethat identifies contractors doing business with the Federal Government and other nations. It provides a standardized methodof identifying a given facility at a specific location and is the responsibility of the Defense Logistics Information Service (FLIS) to assign and maintain. This information is given in Item

Identification (Column 3) along with item part number information following the item's descriptive text.

SL-3-10919A Marine Corps Stocklist SL-3-10919A v

22. Changes to this publication are indicated in the margins of this publication by black filled blocks, e.g. .

23. All Snap-On tools have a life-time warranty under normal use and wear. For replacement assistance contact Butch.E.Brown@Snap-on.Com<mailto:Butch.E.Brown@Snap-on.Com>, phone 226-656-4667, fax 262-656-5500.

24. All Brownell tools have a life-time warranty under normal use and wear. For replacement assistance contact Brownell.com, phone 641-623-5401, fax 741-723-3896. For new orders phone 1-800-741-0015.

25. This tool kit is designed such that the case and trays within contain form-fitting recesses for each major item in the kit. Therefore, exact replacement items will be ordered by utilizing the manufacturer’s part number and

Commercial And government Entity (CAGE) code listed in this publication under the ITEM IDENTIFICATION column following each item’s name and description. Only items supplied with NSNs will be ordered by NSN. If any problems are experienced ordering items by manufacturer’s part number and CAGE code, report them immediately to the MARCORSYSCOM Project Officer at phone (DSN) 378-3264, commercial 703-423-3264.

SL-3-10919A MARINE CORPS STOCKLIST SL-3-10919A

5180-01-504-5663 TOOL KIT, SMALL ARMS EA

Figure 1.

1.

3 4

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

SUPPLY SYSTEM RESPONSIBILITY

1 5180-09-000-3036 001-001 CASE, CARRYING W/FOAM: Black, 24 9/16” L x 19 5/16” W x EA 1

11 15/16” D; P/N 1610NF CAGE 01365

2 5180-09-000-3037 001-002 INSERT, FOAM, FORM FITTING: bottom; P/N BOTTOM, CAGE EA 1 01365

3 5180-09-000-3038 001-003 INSERT, FOAM, FORM FITTING: top lid; P/N TOP LID, CAGE EA 1

01365

4 5180-09-000-3039 001-004 TRAY, SHELF NO. ONE: 1-1/2 in. depth; w/foam; P/N EA 1

7777CHEL-1.5-1610-1, CAGE 01365

5 5180-09-000-3040 001-005 TRAY, SHELF NO. TWO: 1-1/2 in. depth; w/foam; P/N EA 1

7777CHEL-1.5-1610-2, CAGE 01365

6 5180-09-000-3041 001-006 TRAY, SHELF NO. THREE: 2-1/2 in. depth; w/foam; P/N EA 1

7777CHEL-2.5-1610-3, CAGE 01365

2.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

CASE CONTENTS, TOP, LID

7 002-001 BOX, SMALL PARTS: Clear plastic; P/N 4046G, CAGE 74274 EA 1

8 002-002 LENS PLATE: Optivisor No. 5; P/N 225005050, CAGE 12238 EA 1

9 002-003 OPTILOUPE: P/N 225011600, CAGE 12238 EA 1

10 002-004 OPTIVISOR: P/N 255005000, CAGE 12238 EA 1

11 002-005 PADLOCK: P/N 3LHBLU, CAGE 38797 EA 1

12 002-006 POUCH, MECHANIC’S TOOLS: 11.500 in. L x 5.250 in. W x 7.000 in EA 1 H; w/hold-down strap; P/N TP-279, CAGE 58110

Figure 2.

3.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

CASE CONTENTS, SHELF #1

13 003-001 BOX, SPANNER: Steel, 120mm L, large hex end 11mm, small end EA 1 10mm; P/N 9350033, CAGE 19200

14 003-002 CONTAINER: plastic, round, used to store item # 16; P/N P6226110, EA 1

CAGE 05668

15 003-003 FLASHLIGHT: Mini-Mag, black, holster included; P/N 800-1030-4, EA 1

CAGE 50711

16 003-004 GAGE, THICKNESS: 26 blades; P/N 66T, CAGE 57163 EA 1

17 003-005 KEY SET, SOCKET HEAD SCREW: fold-up type, 9 Hex key sizes, EA 1 1/2,1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 and 3/16 in.; P/N

AWEF9K, CAGE 55719

18 003-006 KEY SET, SOCKET HEAD SCREW: fold-up type, metric, 7 Hex key EA 1 sizes, 1.5, 2, 2.5, 3, 4, 5 and 6mm; P/N AWMEF7K, CAGE 55719

19 003-007 KEY SET, SOCKET HEAD SCREW: fold-up type, 6 Hex key sizes, EA 1 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 in.; P/N AWEF6K, CAGE 55719

Figure 3.

4.

3 4

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

20 004-001 MULTI-TOOL, FOLDING, POCKET (LEATHERMAN): stainless EA 1 steel, 4.00 in. closed lg.; P/N PST II, CAGE 0CAD1

21 004-002 REFLECTOR TOOL, CHAMBER: steel, .250 in. O/A dia, 1.000 in. lg.; EA 1

P/N 8448201, CAGE 19204

22 004-003 RULE, MACHINIST’S: steel, 6.00 in. lg.; P/N RULER600, CAGE 55719 EA 1

23 004-004 SCREWDRIVER, FLAT TIP: 13.500 in. lg.; P/N SGD8A, CAGE 55719 EA 1

24 004-005 SCREWDRIVER, FLAT TIP: 4.750 in. lg., P/N SDD224O, CAGE 55719 EA 1

25 004-006 SCREWDRIVER ATTACHMENT, SOCKET WRENCH: steel, 187C EA 1 hexagon, 1/4 in. drive, 1.938 in. lg.; P/N TMA6E, CAGE 55719

26 004-007 SCREWDRIVER SET, JEWELER’S, SWIVEL: contains 4 blade sizes EA 1 and AWL blade; P/N CM6551, CAGE 55719

27 004-008 TAPE, MEASURING: Mea Cap 12 ft. lg.; P/N YASG153, CAGE 55719 EA 1

Figure 4.

5.

3 4

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

28 005-001 TWEEZERS, CRAFTMAN’S: 4.500 in. lg., slim point, P/N

GGG-T-870, CAGE 81348 EA 1

29 005-002 WRENCH, ADJUSTABLE: 10.000 in lg.; P/N AD10, CAGE 55719 EA 1

30 005-003 WRENCH, BOX AND OPEN END, COMBINATION: 197 lg., EA 1 23 mm both ends; P/N OEXM23B, CAGE 55719

31 005-004 WRENCH, OPEN END: 8.312 in. lg., .625 in first end, .750 in. second EA 1 end; P/N VO2024B, CAGE 55719

32 005-005 WRENCH, OPEN END: 10.812 in. lg., .875 in. first end, .938 in. second EA 1 end; P/N VO2830B, CAGE 55719

33 005-006 WRENCH, SPANNER: 41mm lg.; P/N 3052551001, CAGE B0897 EA 1

Figure 5.

6.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIA L NOTE 22, pg iv U/M Y REMARKS

CASE CONTENTS, SHELF #2

34 006-001 BOX, GAGE: With foam insert; P/N RIA32227, CAGE 19204 EA 1

35 006-002 FILE, HAND: 6.000 in. lg., B55 round type; P/N 6R, CAGE 55719 EA 1

36 006-003 FILE, HAND: 6.000 in. lg., flat type; P/N 6MA, CAGE 55719 EA 1

37 006-004 FILE, HAND: 6.000 in. lg., half-round type; P/N 6HR, CAGE 55719 EA 1

38 006-005 FILE, HAND: 6.000 in. lg., three-square type; P/N 6T, CAGE 55719 EA 1

39 006-006 FILE SET, HAND: contains 12 files, 2 handles, 5.500 in lg.; SE 1 P/N HBFN120A, CAGE 55719; c/o

40 1 - FILE, HAND: ROUND: P/N 5NR, CAGE 55719 EA

41 1 - FILE, HAND: HALF-ROUND: P/N 5NHR, CAGE 55719 EA

42 1 - FILE, HAND: FLAT: P/N 5NF, CAGE 55719 EA

Figure 6.

7.

1 6

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

43 1 - FILE, HAND: CROSSING: P/N 5NC, CAGE 55719 EA

44 1 - FILE, HAND: KNIFE: P/N 5NK, CAGE 55719 EA

45 1 - FILE, HAND: MARKING: P/N 5NM, CAGE 55719 EA

46 1 - FILE, HAND: 3-SQUARE: P/N 5NTS, CAGE 55719 EA

47 1 - FILE, HAND: EQUALING: P/N 5NE, CAGE 55719 EA

48 1 - FILE, HAND: BARRETTE: P/N 5NB, CAGE 55719 EA

49 1 - FILE, HAND: JOINT: P/N 5NJ, CAGE 55719 EA

50 1 - FILE, HAND: SLITTING: P/N 5NS, CAGE 55719 EA

51 2 - HANDLE, FILE, PLASTIC: red; P/N HF611, CAGE 55719 EA

52 007-001 PLIERS: 7.125 in. lg., needle nose; P/N 196BCP, CAGE 55719 EA 1

53 007-002 PLIERS, DIAGONAL CUT: 6.125 in. lg.; P/N 86BCP, CAGE 55719 EA 1

54 007-003 PLIERS, SLIP JOINT: 6.438 in. lg.; P/N 46ACP, CAGE 55719 EA 1

55 007-004 PLIERS, WIRE TWISTING: 10.500 in. lg.; P/N PR311, CAGE 55719 EA 1

Figure 7.

8.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

CASE CONTENTS, SHELF #3

56 008-001 BLOCK, BENCH, MECHANIC’S: steel; P/N 129, CAGE 57163 EA 1

57 008-002 BRUSH, FILE, CLEANER: P/N YA337, CAGE 55719 EA 1

58 008-003 HAMMER, HAND: 8.000 in. lg., 4 ounce; P/N HH3908-GS, EA 1

CAGE 95021

59 008-004 HAMMER, HAND: 11.000 in. lg., 8 ounces, ball-peen; P/N BPN8B, EA 1

CAGE 55719

60 008-005 HAMMER, HAND: 10.625 in. lg., 10 ounces, urethane coated, steel; EA 1 deadblow; P/N HBSE10, CAGE 55719

61 009-006 HANDLE, FILE: plastic; P/N SGHF614, CAGE 55719 EA 1

62 009-007 PUNCH SET, PIN: Starrett Pin Punch Set #565, set of 8 punches; SE 1 P/N 827-525-860, CAGE 12238; c/o

63 1 - PUNCH, PIN: 1/16 in.; P/N 827-525-780, CAGE 12238 EA

Figure 8.

9.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

64 1 - PUNCH, PIN: 3/32 in.; P/N 827-525-790, CAGE 12238 EA

65 1 - PUNCH, PIN: 1/8 in.; P/N 827-525-800, CAGE 12238 EA

66 1 - PUNCH, PIN: 5/32 in.; P/N 827-525-810, CAGE 12238 EA

67 1 - PUNCH, PIN: 3/16 in.; P/N 827-525-820, CAGE 12238 EA

68 1 - PUNCH, PIN: 7/32 in.; P/N 827-525-830, CAGE 12238 EA

69 1 - PUNCH, PIN: 1/4 in.; P/N 827-525-840, CAGE 12238 EA

70 1 - PUNCH, PIN: 5/16 in.; P/N 827-525-850, CAGE 12238 EA

71 009-001 PUNCH SET, DRIVE PIN: 8 pcs; P/N PPR708K, CAGE 55719; c/o SE 1

72 1 - PUNCH, DRIVE PIN; 1/16 in. point, 3 5/32 in. lg; P/N PPR2, EA

CAGE 55719

73 1 - PUNCH, ROLL PIN; 5/64 in. point, 3 1/2 in. lg; P/N PPR2 -1/2, EA

CAGE 55719

Figure 9.

10.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

74 1 - PUNCH, ROLL P IN; 3/32 in. point, 3 29/32 in. lg; P/N PPR3, EA

CAGE 55719

75 1 - PUNCH, ROLL PIN; 1/8 in. point, 4 1/4 in. lg; P/N PPR4, EA

CAGE 55719

76 1 - PUNCH, ROLL PIN; 5/32 in. point, 4 5/8 in. lg; P/N PPR5, EA

CAGE 55719

77 1 - PUNCH, ROLL PIN; 3/16 in. point, 5 in. lg; P/N PPR6, EA

CAGE 55719

78 1 - PUNCH, ROLL PIN; 7/32 in. point, 5 3/8 in. lg; P/N PPR7, EA

CAGE 55719

79 1 - PUNCH, ROLL PIN; 1/4 in. point, 5 3/4 in. lg; P/N PPR8, EA

CAGE 55719

TOOL ROLL, PIN POUCH AND CONTENTS

80 010-001 CHISEL, COLD, HAND: 5.500 in. lg.; P/N PPC812A, CAGE 55719 EA 1

81 010-002 DRIFTPIN: brass, 4.000 in. lg., .250 in. dia.; P/N TCGX2TY1, EA 1

CAGE 19204

Figure 10.

11.

1 2

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

82 011-001 DRIFTPIN: brass, 4.000 in. lg., .500 in. dia.; P/N TGGX2TY1, EA 1

CAGE 19204

83 011-002 PUNCH, CENTER, SOLID: 4.000 in. lg., .156 in. point dia.; EA 1

P/N 41P3185, CAGE 19204

84 011-003 PUNCH, CENTER, SOLID: 3.250 in. lg., .078 in. point dia.; EA 1

P/N 3421A34, CAGE 39428

85 011-004 PUNCH, DRIVE PIN: 6.000 in. lg., 3/8 in. hex; P/N PPC105LA, EA 1

CAGE 55719

86 011-005 PUNCH, DRIVE PIN: 5.312 in. lg., 5/16 in. hex; P/N PPC104LA, EA 1

CAGE 55719

87 011-006 PUNCH, DRIVE PIN: 6.000 in. lg., 1/4 in. hex, 1.500 in. point lg.; EA 1

P/N PD5120-00-752-9030, CAGE 80244

88 011-007 PUNCH, PIN: 1/8 in.; P/N 587-465-125, CAGE 12238 EA 1

89 011-008 PUNCH, PIN: 1/16 in.; P/N 587-465-062, CAGE 12238 EA 1

90 011-009 TOOL ROLL, PIN POUCH: P/N TOOL ROLL, PIN POUCH, CAGE EA 1

59678

Figure 11.

12.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

TOOL ROLL, STONE POUCH AND CONTENTS

91 012-003 STONE, SHARPENING: P/N HS4, CAGE 06565 EA 1

92 012-001 STONE, SHARPENING: P/N HF813, CAGE 06565 EA 1

93 012-004 STONE, SHARPENING: P/N HF13, CAGE 06565 EA 1

94 012-002 STONE, SHARPENING: P/N FF334, CAGE 06565 EA 1

95 012-005 STONE, SHARPENING: P/N HF43, CAGE 06565 EA 1

96 012-006 STONE, SHARPENING: P/N FF46, CAGE 06565 EA 1

97 012-007 TOOL ROLL, STONE POUCH: holds 6 items 012-001 thru 012-006; EA 1

P/N TOOL ROLL, STONE POUCH, CAGE 59678

Figure 12.

13.

3 4 5

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

CASE CONTENTS, BOTTOM

98 013-001 CAPS, VISE JAW: 2.500 in jaw width; P/N 6101630, CAGE 19204 PR 1

99 013-002 PLIERS SET, RETAINING RING: 6 pcs in plastic case; P/N PRH406, SE 1

CAGE 55719; c/o

100 1 - PLIERS, RETAINING RING: 18 deg/.038 in. tips; P/N PRH12, EA

CAGE 55719

101 1 - PLIERS, RETAINING RING: 18 deg/.047 in. tips; P/N PRH32, EA

CAGE 55719

102 1 - PLIERS, RETAINING RING: 18 deg/.070 in. tips; P/N PRH34, EA

CAGE 55719

103 1 - PLIERS, RETAINING RING: 90 deg/.038 in. tips; P/N PRH129 EA

CAGE 55719

104 1 - PLIERS, RETAINING RING: 90 deg/.047 in. tips; P/N PRH329 EA

CAGE 55719

105 1 -PLIERS, RETAINING RING: 90 deg/.070 in. tips; P/N PRH349, EA

CAGE 55719

Figure 13.

14.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

SCREWDRIVER SET

106 014-001 CASE, SCREWDRIVER: P/N 08010400, CAGE 59678 EA 1

107 014-002 HANDLE, SCREWDRIVER: P/N 080086181, CAGE 59678 EA 1

108 014-003 HANDLE, STUBBY SCREWDRIVER: P/N 080090000, CAGE EA 1

59678

109 014-004 MAG TIP, PHILLIPS #1: P/N 080440100, CAGE 59678 EA 1

110 014-005 MAG TIP, PHILLIPS #2: P/N 080440200, CAGE 59678 EA 1

111 014-006 MAG TIP, 0.138 IN.: P/N 080445002, CAGE 59678 EA 1

112 014-007 MAG TIP, 0.185 IN.: P/N 080445103, CAGE 59678 EA 1

113 014-008 MAG TIP, 0.248 IN.: P/N 080445303, CAGE 59678 EA 1

114 SCREWDRIVER ATTACHMENT: 1/4 in. drive surface; tip T15; P/N EA 1

TTX15E, CAGE 55719

115 SCREWDRIVER ATTACHMENT: 1/4 in. drive surface; tip T30; P/N EA 1

TTX30E, CAGE 55719

116 014-009 VISE, BENCH, CLAMP BASE: P/N 765, CAGE 78525 EA 1

Figure 14.

15.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

117 015-001 WRENCH, TORQUE: 1/4 in. dr; w/case: P/N TE6A, CAGE 55719 EA 1

Figure 15.

16.

SL-3-10919A COMPONENTS STOCKLIST SL-3-10919A

DATED: SERIAL NO. OF END ITEM: ____________________

END ITEM: TOOL KIT, SMALL ARMS, TK-2111

INVENTORY SHEET

M MONTHS

O ITEM

FIG-KEY D IDENTIFICATION Q

ITEM REF E T

NO NSN DESIG L NOTE: see SPECIAL NOTE 22, pg iv U/M Y REMARKS

USING UNIT RESPONSIBILITY

NOTE: Using units should refer tot the SL-1-2 and requisition the required publications to support the item identified by the ID number shown on the cover of this SL-3.

1 5220-01-014-8183 016-1 GAGE, BARREL, EROSION: stl; 0.221 in dia, 12 in lg; P/N 8448496, EA AR

CAGE 19204

2 6695-00-070-7815 016-2 GAGE, FIRING PIN PROTRUSION: stainless stl;double end; comb EA AR gage; 2 in lg, 0.062 in thk; P/N 7799735, CAGE 19204

3 5220-00-070-7814 016-3 GAGE, HEADSPACE: P/N 7799734, CAGE 19204 EA AR

4 5220-00-221-9391 016-4 GAGE, STRAIGHTNESS: stl; 0.215 in dia, 6.482 in lg; P/N 8448202, EA AR

CAGE, 19204

5 5220-01-075-5004 016-5 GAGE, PLU, PLAIN CYLINDRICAL: sgl end; 0.0702 in dia; P/N EA AR

12620101, CAGE 19200

Figure 16.

17.