LUTRON_HJS-1 Hub Spec Sheet.pdf

SPECIF ICAT ION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 1 03.13.18

Vive Hub

Vive Hub Dashboard

Vive Wireless Hub The Vive hub provides a connection point for Lutron

Vive devices such as PowPak wireless dimming and switching modules, PowPak Wireless Fixture

Controllers, PowPak 20 A Relay Modules, Maestro

Wireless dimmers and switches, Wireless Receptacle controls, Pico remote controls, Radio Powr Savr occupancy sensors, and daylight sensors. For a complete list of compatible devices, see the last page of this document.

For more information on the Vive hub, including training materials, design information and software updates, please visit www.lutron.com/vive

Features

• Can be easily programmed with any Wi-Fi enabled iOS® or Android® compatible device using the free

Lutron Vive app (available for download from the

App Store or Google Play®) or by using web-based software.

• iOS® and Android® Apps – Helper apps act as an intermediary between Vive systems and the Lutron

Cloud without the need of a permanent internet connection. Connects to hubs when on site. When a smart device reconnects to the Internet, it passes needed information back and forth.

– Registration of jobs / users for extended warranty.

– Manage multiple jobs with contacts and job info.

– Invite facility users to have access to hubs / job.

– Automatically send handoff documentation personalized to your firm to facility management team. Including programming user guide, online

"How-to" videos, and support number.

– Connection to hub browser user interface for

Setup. Normal web browser still works and the app is not required.

– Connection to hub browser dashboard for control and monitor. Normal web browser still works and the app is not required.

– Backup the database to Lutron's Cloud for hub replacement.

• Communicates with controls on a floor using Lutron wireless Clear Connect technology

• Distributed system architecture.

- Wireless sensors and controls must be located within 60 ft (18 m) line of sight, or 30 ft (9 m), through walls, of the associated device.

• Supports timeclock events based on both sunrise and sunset or fixed time-of-day.

• Uses Lutron RF signal strength measurements to find devices nearby for quick association and programming without having to climb ladders.

• Dashboard of current status for control and monitoring of the system. Also shows current energy usage.

• Integrated multi-color LED provides feedback on what mode the hub is in.

• Contact Closure Inputs for integration with devices by others including devices for Title 24 Automatic

Demand Response.

• Connects directly to any smartphone, tablet or computer using built in Wi-Fi. 2.4 GHz 802.11b / g.

using WPA2 Security.

• Each hub presents a dashboard of devices and areas controlled by it.

• If all the hubs on a job are networked using Ethernet, you can easily navigate from one hub to another to view its dashboard.

continued on next page . . .

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 2 03.13.18

Features (continued)

• Ethernet 10 / 100 Mbps connection for:

- Native BACnet / IP (see Lutron P/N 369978 at www.lutron.com for PIC Statement) integration into

Building Management Systems (HJS-2-XX only).

- Network multiple Vive hubs together as an independent system or as part of an existing building network.

• Firmware upgradable for future features and security patches.

• Password protected access.

• Flush-mount or surface-mount options available.

• Supported on most devices that use an HTML5 compliant browser (iOS®, Android®, Windows®, Mac).

• Required browsers are Google Chrome® and Safari.

• Supports HTTPS.

• Recommended configurations for smart devices:

Device OS Version iPhone 6, iPhone 6 plus or newer iOS® 10.0 or later

Supported on most Android® devices running Android® 6.0 or later.

Android® 6.0 or later

• Daylighting Setpoint Tweaking – If the lights are too bright or too dim while using daylighting, adjust the settings in real time from a smart device to alter the setpoint for the light level that is maintained between natural and electric light. Older devices (released prior to September 2017) can be adjusted but may take a minute to reach desired level because of a of slow fade. New devices will respond immediately.

• Timeclock Occupancy Sensor Settings Changes

– Requires devices shipped after September

2017. Devices shipped prior to that date will be displayed as "unsupported" in the software UI.

Allows timeclock events to change the behavior of occupancy settings based on time of day.

For example, change the unoccupied level of corridors/hallways from 25% during the day, and off at night. The following settings can be changed:

– Occupied Level – The level the lights go to when occupied. Changes are not applied immediately to currently occupied spaces, but will change the next time the space goes occupied to minimize distraction.

– Unoccupied Level – The level the lights go to when unoccupied. Changes are applied immediately to spaces not currently occupied.

– Enable/Disable Occupancy – Change whether devices will respond to the occupancy sensor.

– Timeout of the sensors (requires FC-VSENSOR).

LRF2 sensors still require this setting to be set on the sensor.

• 365-day schedulable timeclock with exceptions for holidays.

– Requires Vive hub software version 01.07.04 or higher.

– Allows scheduling events 10 years in advance.

– Set recurring events with exceptions on holidays.

– Allows scheduling events on specific day of the year.

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 3 03.13.18

Specifications

Regulatory Approvals

• cULus Listed

• FCC approved. Complies with the limits for a Class B device, pursuant to Part 15 of the FCC rules.

• IC

• COFETEL

• NOM

Power / Performance

• Input to power supply:

120 – 277 V~ 50 / 60 Hz 0.6 A

• Input to Vive hub:

24 V- 350 mA

System Limits

• HJS-1, HJS-2 support up to 700 Lutron Wireless devices. HJS-0 supports 75 Lutron Wireless devices.

Devices must be located within 71 ft (22 m) of the Vive hub.

• Any given load device can be controlled by

10 occupancy sensors, 10 Pico remote controls and

1 daylight sensor (Pico remote controls and sensors must be located within 30 ft [9 m] of the load device they are controlling).

Mounting

• Vive hub units should be mounted in the middle of non-metal ceiling tile or drywall, visible from inside the space.

• Installation near metal, other than a junction box, may reduce RF range. Hub should be at least 12 in

(305 mm) away from metal objects.

• Use surface-mount version for mounting to a hard or cement ceiling.

• Power supply mounts to a standard 4 in x 4 in

(101 mm x 101 mm) square junction box.

• Power supply must be mounted within 100 ft (31 m) of the Vive hub. Wiring should be 24 AWG to

12 AWG (0.2 mm2 to 2.5 mm2).

Environment

• For indoor use only.

• 32 to 104 °F (0 to 40 °C).

• Relative humidity less than 90% non-condensing.

Contact Closure Input Terminals

• Only the first contact closure is used.

• Accepts only maintained inputs.

• Off-state leakage current must be less than 100 μA.

• Open circuit voltage: 24 V- maximum.

• Input wiring: 24 AWG to 12 AWG (0.2 mm2 to 2.5 mm2).

• Contact Closure Inputs on multiple hubs can be wired in parallel. DO NOT wire inputs in parallel with other equipment as it can cause the inputs on either of the devices to falsely trigger.

• Up to 4 hubs in parallel.

• To ensure proper operation of Contact Closure

Inputs, a PS-J-20W-UNV power supply may not be used to provide power to more than one hub.

• Inputs must be dry contact closure, solid state, open collector, or active-low (NPN) / active high

(PNP) output.

- Open collector NPN or active-low on-state voltage must be less than 2 V- and sink 3.0 mA.

- Open collector PNP or active-high on-state voltage must be greater than 12 V- and source 3.0 mA.

Additional Software Features

• Measured energy data for PowPak Wireless

Fixture Control accurate to ±2% or 0.5 W, whichever is higher.

• Calculated energy data for PowPak modules and

Maestro dimmers or switches at 10% accuracy.

• Create and edit areas.

• Tune area light levels by trimming the high-end and low-end output to save energy.

• Adjust occupancy settings. Create occupancy groups.

• Load shed is configurable.

• Can extend the RF range of up to 15 Pico wireless remotes per Vive hub. These remotes can be set up to control any device within the 71 ft (22 m) range of that

Vive hub.

Warranty

• 1 year limited warranty. The customer can register the product to increase the warranty period from

1 year to 5 years. Please visit www.lutron.com/

TechnicalDocument Library/369-119_Wallbox_

Warranty.pdf for warranty details.

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 4 03.13.18

How to Build a Model Number

Example

H J S – 1 – F M

Frequency

J = 431.0 – 437.0 MHz (USA, Canada, Mexico)

Type

0 = Starter Vive hub without BACnet limited to

75 devices (Available as HJS-0-FM only)

1 = Vive hub without BACnet

2 = Premium Vive hub with BACnet

Mounting

FM = Flush-Mount (non-metal ceiling tiles or drywall)

SM = Surface-Mount (cement)

Available Vive Hub Model Numbers (includes power supply and mounting adapter)

HJS-0-FM - Starter hub, flush-mount adapter and power supply

HJS-1-FM - Vive hub, flush-mount adapter and power supply

HJS-1-SM - Vive hub, surface-mount adapter and power supply

HJS-2-FM - Premium Vive hub, flush-mount adapter and power supply

HJS-2-SM - Premium Vive hub, surface-mount adapter and power supply

HJS-UPDATE - Software upgrade license to add BACnet to HJS-0 and HJS-1 hubs

HJS-DEVICES - Software upgrade license expands device limit to 700 devices for HJS-0 hubs

Frequency

Mounting

Type

Replacement Part Model Numbers

PS-J-20W-UNV Vive hub external power supply

H-MOUNT-FM Flush-mount installation adapter

H-MOUNT-SM Surface-mount installation adapter

Ethernet Switch Model Numbers (sold separately)

All switches are unmanaged 10 / 100 / 1000 Mbps.

This IT gear is a suggested list. IT provided gear that is equivalent or better is sufficient. Enterprise level gear recommended.

ETH-SWITCH-16 16 port

ETH-SWITCH-24 24 port

ETH-SWITCH-24-1M 24 port, 1 multi-mode fiber

ETH-SWITCH-24-2M 24 port, 2 multi-mode fiber

ETH-SWITCH-24-1S 24 port, 1 single-mode fiber

ETH-SWITCH-24-2S 24 port, 2 single-mode fiber

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 5 03.13.18

Dimensions Dimensions are shown as: in (mm)

Surface-mount Adapter Details

• Knockouts for

1/2 in or 3/4 in

(13 mm or 19 mm) conduit.

Vive Hub Top View Side View

6.8

(173)

5.3

(135)

2.8

(71)

1.5

(38)

Flush-mount Adapter Top View Side View

6.5

(165)

3.1

(79)

Surface-mount Adapter Top View Side View

4.8

(122)

4.8

(122)

3.5

(89)

Power Supply Top View Side View

4.0

(102)

3.4

(86)

3.4

(86)

4.0

(102)

1.7

(43)

Flush-mount Adapter Details

• Requires a 6 in

(153 mm) hole to be cut in the ceiling for mounting.

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 6 03.13.18

Range Diagrams

100 ft (30 m) ft (3 m

Private Office Maestro Wireless Dimmer

Conference Room PowPak Dimming Module

Open Office PowPak Fixture Control

Personal Control Pico Remote Control

Sensors Radio Powr Savr Occupancy Sensor

Radio Powr Savr Daylight Sensor

Setup, Monitor and Control Vive Hub

71 ft (22 m) Maximum

71 ft (22 m) Maximum

100 ft (30 m)

100 ft (30 m)

Note: Pico remote controls and sensors must be within 30 ft (9 m) of the load device they are controlling 1

Range with multiple Vive hubs

All wireless devices to be associated to the Vive hub must be within 71 ft (22 m) of the Vive hub and must be on the same floor as the Vive hub.

Note: Vive hubs should be mounted greater than 10 ft (3 m) apart on the same floor.

Note: A corporate Wi-Fi network can interfere with the Wi-Fi on the Vive hub. Where a corporate Wi-Fi network exists, it is recommended to do the following:

• Connect the Vive hub to the corporate network using the Ethernet connection on the hub and disable Wi-Fi on the hub.

Note: Vive hubs should be mounted greater than 10 ft (3 m) from a Wi-Fi router or access point.

30 ft (9 m) Maximum 1

30 ft (9 m) Maximum 1

30 ft (9 m) Maximum 1

30 ft (9 m) Maximum 1

71 ft (22 m) Maximum

Vive Hub RF coverage

1 Wireless sensors and controls must be located within 60 ft (18 m) line of sight, or 30 ft (9 m), through walls, of the associated device.

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 7 03.13.18

Wiring

24 V-

120 –277 V~

Product Overview (Flush-mount adapter)

Ceiling tile Power supply

Vive hub

Flush-mount adapter

Vive Hub

To Power Supply

To additional Contact Closure devices by others (optional)

CCI1

COM

24 V-

COM

CCI2

Red

Blue

Ethernet 10/100

LAN

Ethernet Connection

24 V- 120 –277 V~

Ceiling

Power supply

Vive hub

Surface-mount adapter

Product Overview (Surface-mount adapter)

Note: For Chicago plenum space applications the power supply has a metal enclosure and can be mounted in the plenum space. The Vive hub cannot be mounted in the plenum space and needs to be mounted outside the plenum space on the surface of the ceiling.

DO NOT power the Vive hub with an Uninterruptable Power Supply (UPS) or emergency generator power. The Vive hub must be powered with normal power only when emergency PowPak / Fixture Controllers are utilized in the system. If the Vive hub is powered from UPS or emergency generator power any emergency PowPak utilized in the system will either not enter emergency mode, or exit emergency mode prematurely.

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 8 03.13.18

Vive Security Statement

Lutron takes the security of the Vive Lighting Control System very seriously.

The Vive Lighting Control System has been designed and engineered with attention to security since its inception.

Lutron has engaged security experts and independent testing firms throughout the entire development of the Vive

Lighting Control System. Lutron is committed to security and continuous improvement throughout the Vive product lifecycle.

The Vive Lighting Control System uses a multi-tiered approach to security and National Institute of Standards and

Technology (NIST) recommended techniques for security.

They include:

1. An architecture that isolates the wired Ethernet network from the wireless network, which strictly limits the possibility of the Vive Wi-Fi being used to access the corporate network and gain confidential information

2. A distributed security architecture with each hub having its own unique keys that would limit any potential breach to only a small area of the system

3. Multiple levels of password protection (Wi-Fi network and the hubs themselves), with built-in rules that force the user to enter a strong password

4. NIST-recommended best practices including salting and SCrypt for securely storing usernames and passwords

5. AES 128-bit encryption for network communications

6. HTTPS (TLS 1.2) protocol for securing connections to the hub over the wired network

7. WPA2 technology for securing connections to the hub over the Wi-Fi network

8. Azure's provided encryption-at-rest technologies

The Vive hub can be deployed in one of two ways:

• Dedicated Lutron Network

• Connected to the corporate IT network via Ethernet. The Vive hub must be connected via Ethernet to access certain features such as BACnet® for BMS integration. Lutron advises following best practices in this instance, including separating the business information network and the building infrastructure network. Use of a VLAN or physically separated networks is recommended for secure deployment.

Dedicated Lutron Network Deployment

The Vive hub is not connected to the building network. Wi-Fi is used to connect to a smart device such as a phone, tablet, or PC for commissioning and configuration only. The Vive hub serves web pages for setup and maintenance via a password-protected connection. The Wi-Fi SSID can be set to not broadcast. The Vive hub

Wi-Fi may be disabled if desired.

Corporate IT Network Deployment

The Vive hub may be deployed with a fixed IP address or served over DHCP. Once the IT network is operational, the Vive hub will serve password protected web pages for access and maintenance. The Vive hub Wi-Fi may be disabled if desired.

The Vive hub acts as a Wi-Fi access point purely for the configuration and commissioning of the Vive system. It is not a substitute for your building’s normal Wi-Fi access point. The Vive hub does not act as a bridge between wireless and wired networks.

It is strongly recommended that local IT security professionals be involved with the network configuration and set-up to ensure the installation meets their security needs.

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 9 03.13.18

Dedicated Network Wi-Fi Only

XVive

Ports Used

• No IT configuration needed

Corporate Network Single Hub

XVive

Ports Used

Link segment 330 ft (100 m) Building Management System (BMS)

Vive Hub

Vive Hub

Corporate Wi-Fi Router

Traffic Port Type Connection Description

Outbound 443 TCP Both Ethernet and

Wi-Fi

Used to communicate with software update server

47808

(configurable)

UDP Ethernet Used for BACnet integration into Building Management Systems

8443 TCP Both Ethernet and

Wi-Fi

Used to communicate with webserver from Vive hub

80 TCP Used to start web connection

Inbound 443 TCP Both Ethernet and

Wi-Fi

Used to serve user interface to smart device

47808

(configurable)

UDP Ethernet Used for BACnet integration into Building Management Systems

8443 TCP Both Ethernet and

Wi-Fi

Used to communicate with webserver from Vive hub

80 TCP Used by other hubs to proxy

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 10 03.13.18

Corporate Network (continued) Multiple Hubs

Ports Used

Link segment 330 ft (100 m)

Building Management System (BMS)

Vive Hub

Corporate Wi-Fi Router

Vive Hub

Notes

• The inter-hub wiring is considered IEC PELV/NEC® Class 2; do not run in the same conduit as line (mains) voltage wiring.

• Wiring distance for any single link segment is 330 ft (100 m) max; use Lutron-provided or 3rd party Ethernet switches for longer distances (see page 3).

• Up to 64 hubs can be networked together.

• Hubs communicate over the inter-hub link using multicast UDP or TCP; a dedicated network is recommended but not required.

• The Wi-Fi access port cannot be used to create an ad hoc network for use as the inter-hub communication link.

Inter-Hub Link Wiring

Link segment 330 ft (100 m)

Traffic Port Type Connection Description

Outbound 443 TCP Both Ethernet and

Wi-Fi

Used to communicate with software update server

5353 UDP Ethernet Used for Bonjour networking protocol

47808

(configurable)

UDP Ethernet Used for BACnet integration into Building Management Systems

8443 TCP Both Ethernet and

Wi-Fi

Used to communicate with webserver from Vive hub

80 TCP Both Ethernet and

Wi-Fi

Used to start web connection

Inbound 443 TCP Both Ethernet and

Wi-Fi

Used to serve user interface to smart device

47808

(configurable)

UDP Ethernet Used for BACnet integration into Building Management Systems

8443 TCP Both Ethernet and

Wi-Fi

Used to communicate with webserver from Vive hub

80 TCP Both Ethernet and

Wi-Fi

Used by other hubs to proxy

Job Number:

Model Numbers:

Vive HJS-0, HJS-1, HJS-2 Wireless Hub

369902g 11 03.13.18

Compatible Devices

• Maestro Wireless Dimmers and Switches

– MRF2S-6CL-XX 1

– MRF2S-6ELV120-XX 1

– MRF2S-8S-DV-XX 1

– UMRF2S-8S-DV-XX 1

– MRF2S-8ANS120-XX 1

– UMRF2S-8ANS120XX 1

– MRF2S-6ANS-XX 1

– MRF2S-6ND-120-XX 1

• Maestro Wireless Companion Dimmers and Switches

– MA-R-XX 1

– MSC-AD-XX 1

– MA-AS-XX 1

– MA-AS-277-XX 1

– MSC-AS-XX 1

– MSC-AS-277-XX 1

• PowPak Modules

– FCJS-010

– FCJS-010-EM

– FCJS-ECO

– FCJS-ECO-EM

– RMJS-8T-DV-B

– RMJS-8T-DV-B-EM

– URMJS-8T-DV-B

– RMJS-16RCCO1DV-B

– URMJS-16RCCO1DVB

– RMJS-16R-DV-B

– RMJS-16R-DV-B-EM

– URMJS-16R-DV-B

– RMJS-5RCCO1-DV-B

– RMJS-5R-DV-B

– RMJS-20R-DV-B

– RMJS-20RCCO1DV-B

– RMJS-CCO1-24-B

– URMJS-CCO1-24B

• Pico Remote Controls

– PJ2-2B-GXX-YYY 1

– PJ2-2BRL-GXX-YYY 1

– PJ2-3B-GXX-YYY 1

– PJ2-3BRL-GXX-YYY 1

– PJ2-4B-GXX-YYY 1, 2

– PJN-2B-GXX-L01 1

– PJN-3BRL-GXX-L01 1

• Wireless Occupancy and Daylight Sensors

– LRF2-OCR2B-P-WH

– LRF2-VCR2B-P-WH

– LRF2-OHLB-P-WH

– LRF2-OKLB-P-WH

– LRF2-OWLB-P-WH

– LRF2-VHLB-P-WH

– LRF2-VKLB-P-WH

– LRF2-VWLB-P-WH

– LRF2-DCRB-WH

• Energy Retrofit Kits

– MRF2S-1S8A-1OC

– MRF2S-1S8A-1OH

– MRF2S-1S8A-1OK

– MRF2S-1S8A-1OW

– MRF2S-1S8A-1VC

– MRF2S-2S8A-1OW

• Wireless Receptacle Controls

– CAR2S-15-STR-XX 1

– CAR2S-20-STR-XX 1

– CAR2S-15-DTR-XX 1

– CAR2S-20-DTR-XX 1

• Wireless Fixture Controls

– DFCSJ-OEM-RF

– DFCSJ-OEM-OCC

– DFC-OEM-DBI

1 "XX" denotes color code and "YYY" denotes button marking code.

2 PJ2-4B-GXX-L41 is not supported with the Vive hub.

)Lutron, Lutron, Clear Connect, Maestro, Maestro Wireless, Pico, PowPak, and Vive are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries.

Radio Powr Savr is a trademark of Lutron Electronics Co., Inc.

BACnet is a registered trademark of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE).

Android, Chrome, Google, and Google Play are registered trademarks of Google Inc.

NEC is a registered trademark of National Fire Protection Association, Quincy, Massachusetts.

NIST is a registered trademark of the National Institute of Standards and Technology.

Samsung and Galaxy are registered trademarks of Samsung Electronics Co., Ltd.

Bonjour, Mac, Safari and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

iOS is a trademark of Cisco in the U.S. and other countries and is used under license.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.