Layout Measurements Additional eyes with existing.pdf
PDF 694 KB Posted
- Solicitation number
- W519TC-23-R-2076
About this file
This document provides layout measurements and proposed mooring eye installations for two sites. It details plans to install additional mooring eyes and markings at an existing sunshade and wash rack. At the sunshade, it specifies locations for two new mooring eyes 15 feet from the edge of the apron and wheel placement lines 15 feet from the threshold. It also outlines dimensions for parking spot identification squares and numerals. For the wash rack, it proposes six mooring eyes spaced 20 feet apart along the centerline and wheel placement lines 2 feet behind the front eye. Both sites would be marked with black paint.
The related federal contract opportunity is solicitation number W519TC-23-R-2076 for mooring eye repair and installation at the specified sites at Dirab and KAA. The soliciting agency is the Department of the Army Materiel Command Contracting Command at Rock Island Arsenal.
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CUI
CUI
Sunshade Additional Mooring Eyes .
Center Line Total Length=60’
6” wide 2” Black Border 25’ from edge of apron
Wheel Placement Lines 2 dashes 24” long x 3” wide
1.5” Black border 24” off set from centerline 15’ from apron threshold
Parking Spot Identification Square Square @ 18” x 18” Border @ 3” Wide
Centered on centerline
Parking Spot Designation Numerals Numeral centered in square 12” tall
Numeral 1 in the Western Oriented Parking Spot Numeral 2 in the Eastern Oriented Parking Spot
Legend Existing Mooring Eye
Proposed Mooring Eye
Wheel Stop
Tow Line (center line)
Support Beam
20’ Between Mooring Eyes
15’ Between Mooring Eyes and Edge of Apron
25’ Between Tow Line and Edge of Apron
13’ Between Mooring Eyes and Apron Threshold
15’ Wheel Placement Lines and Apron ThresholdNot to Scale
All markings will be highlighted with black paint
106’ / 32.3m
90’ / 28m
CUI
CUI
Wash Rack Mooring Eyes
Center Line 6” wide 2” Black Border Centered on Wash Rack
Wheel Placement Lines 2 dashes 24” Long x 3” Wide
1.5” Black Border 24” Offset From Centerline
2’ Behind Front Mooring Eye
Rack Interior Slab 49’ x 49’ 4 Equal Pads
Legend Wash Rack Drain
Proposed Mooring Eye
Wheel Stop
Tow Line (center line)
Support Beam
20’ Between Mooring Eyes
At least 2’ Between Mooring Eyes and Edge of Any Slab
Not to Scale
All markings will be highlighted with black paint
106’ / 32.3m
90’ / 28m
23’
23’
Drain Approximately 2’4” in Width
File details come from the government source that posted it. Updated .