J.1.b.2 Labor Cat Descriptions ATOM-5.pdf

Labor Categories Classification Description/Responsibilities Qualifications Core/IDIQ

Computer Operator III Wage Determination

The Computer Operator III processes a range of scheduled routines. In addition to operating the system and resolving common error conditions, this worker diagnoses and acts on machine stoppage and error conditions not fully covered by existing procedures and guidelines (e.g., resetting switches and other controls or making mechanical adjustments to maintain or restore equipment operations). In response to computer output instructions or error conditions, the Computer Operator III may deviate from standard procedures if standard procedures do not provide a solution and refers problems which do not respond to corrective procedures to a person of supervisory or higher individual contributor level.

Typically possesses two (2) years of college with courses in computer science, mathematics, or other related computer courses, plus six (6) years of related experience. Additional relevant experience may be substituted for a portion of education.

Core (CPFF)

Computer Systems Administrator VI

Implements and maintains various technical systems, and serves as an interface to the supported community users. Provides guidance, direction, and training to others in the group. Serves as a backup to lead computer systems administrator. Builds and/or debugs complicated hardware and software to correct difficult problems using technicallly advanced problem solving skills. Develops and implements system documentation and operation procedures. Identifies and corrects processing anomalies. Coordinates and administers the test and installation of network connections, configures and debugs network equipment. Researches the selection and installation of new computer equipment including hardware and software. Performs and provides server, workstation, and system expertise including on-site and off-site travel. Oversees the order and replacement of new hardware and software including warranty claims. Implements functions associated with data and documentation management of systems. Coordinates and schedules system upgrades and maintenance.

Typically requires an Associate degree in a computer field and seven (7) years of related experience. Progressive relevant training and/or certification may be substituted for a portion of the experience requirement.

Core (CPFF)

Computer Systems Administrator VI

Implements and maintains various technical systems, and serves as an interface to the supported community users. Provides guidance, direction, and training to others in the group. Serves as a backup to lead computer systems administrator. Builds and/or debugs complicated hardware and software to correct difficult problems using technicallly advanced problem solving skills. Develops and implements system documentation and operation procedures. Identifies and corrects processing anomalies. Coordinates and administers the test and installation of network connections, configures and debugs network equipment. Researches the selection and installation of new computer equipment including hardware and software. Performs and provides server, workstation, and system expertise including on-site and off-site travel. Oversees the order and replacement of new hardware and software including warranty claims. Implements functions associated with data and documentation management of systems. Coordinates and schedules system upgrades and maintenance.

Typically requires an Associate degree in a computer field and seven (7) years of related experience. Progressive relevant training and/or certification may be substituted for a portion of the experience requirement.

IDIQ

Computer Systems Analyst III Wage Determination

Performs routine tasks dealing with various types of technical systems and serving as an interface to the supported community users. Builds and/or debugs hardware and software to correct problems using basic problem solving skills. Assists in the development of systems documentation and operation procedures. Provides diagnostic support to correct processing anomalies. Tests and installs connections. Performs and provides server and workstation expertise; includes on-site travel.

Orders replacement or new hardware and software including warranty claims. Performs clerical functions associated with data and documentation management. Works under the direction and supervision of experienced system analysts; new aspects of work are closely supervised.

Typically possesessTwo (2) years of college in a computer field and four (4) years of related experience or any equivalent combination of relevant education or experience for a total of six (6) years.

Core (CPFF)

Computer Systems Analyst III Wage Determination

Performs routine tasks dealing with various types of technical systems and serving as an interface to the supported community users. Builds and/or debugs hardware and software to correct problems using basic problem solving skills. Assists in the development of systems documentation and operation procedures. Provides diagnostic support to correct processing anomalies. Tests and installs connections. Performs and provides server and workstation expertise; includes on-site travel.

Orders replacement or new hardware and software including warranty claims. Performs clerical functions associated with data and documentation management. Works under the direction and supervision of experienced system analysts; new aspects of work are closely supervised.

Typically possesessTwo (2) years of college in a computer field and four (4) years of related experience or any equivalent combination of relevant education or experience for a total of six (6) years.

IDIQ

Configuration Management Analyst Provides Configuration Management and Data Management (CM/DM). Responsible for development and implementation of CM and DM system for facilities, tests, and projects. Develops and maintains tracking systems for documents, instrumentation, document and data archives, facility tests and service and purchase requests. Be the point of contact for all CM/DM related activities.

Typically possesses a BS or higher degree in an engineering discipline.

Additional years of related experience may count as educational equivalency. Core (CPFF)

Configuration Management Analyst Provides Configuration Management and Data Management (CM/DM). Responsible for development and implementation of CM and DM system for facilities, tests, and projects. Develops and maintains tracking systems for documents, instrumentation, document and data archives, facility tests and service and purchase requests. Be the point of contact for all CM/DM related activities.

Typically possesses a BS or higher degree in an engineering discipline.

Additional years of related experience may count as educational equivalency. IDIQ

Controls Engineer, Senior Responsible for troubleshooting, and maintaining existing facility electro-mechanical control systems. Upgrades, designs and develops new control systems based on research test requirements. Depending on capabilities, may be assigned project management responsibilities. Works as a member of test, project and/or maintenance teams to provide controls/electrical engineering support. May have direct interaction with research customers, other engineers, and/or test/project, facility, or functional managers.

Typically possesses a BS or higher degree in Controls Engineering or related field (e.g. Electrical, Controls, Electronics, Electro-mechanical) with 5 or more years of related experience. Additional years of related experience may count as educational equivalency. Will typically have some specialized knowledge/experience of controls engineering.

Core (CPFF)

Controls Engineer, Senior Responsible for troubleshooting, and maintaining existing facility electro-mechanical control systems. Upgrades, designs and develops new control systems based on research test requirements. Depending on capabilities, may be assigned project management responsibilities. Works as a member of test, project and/or maintenance teams to provide controls/electrical engineering support. May have direct interaction with research customers, other engineers, and/or test/project, facility, or functional managers.

Typically possesses a BS or higher degree in Controls Engineering or related field (e.g. Electrical, Controls, Electronics, Electro-mechanical) with 5 or more years of related experience. Additional years of related experience may count as educational equivalency. Will typically have some specialized knowledge/experience of controls engineering.

IDIQ

Data System / Computer Engineer

Responsible for the study, design, implementation, and/or project management of a wide variety of computer systems for both facilities and test related apparatus. This includes Data Acquisition Systems and their associated Hardware and Software. Works as a member of test, project and/or maintenance teams to provide instrumentation engineering support. May have direct interaction with research customers, other engineers, programmers, and/or test/project, facility, or functional managers. May lead Data System Technicians and provide technical direction or assignments. Typically receives supervision from Senior Engineer or functional manager.

Typically possesses a BS or higher degree in Computer, Electrical or related engineering discipline with entry level to 5 or more years of related experience with computer systems. Additional years of related experience may count as educational equivalency. May have some specialized knowledge/experience of one or more aspects related to Data Systems / Computer Engineering.

Core (CPFF)

Electrical Engineer, Senior

Responsible for the study, design, implementation, and/or project management of a wide variety of electrical systems for both facilities and test related apparatus. May be assigned as project manager for complex or multi-discipline projects. Works as a member of test, project and/or maintenance teams to provide electrical engineering expertise. Will typically have direct interaction with research customers, other engineering leads, and/or test/project, facility, or functional managers. May lead other electrical engineers and electricians and provide technical direction or assignments. Typically receives supervision from functional manager.

Typically possesses a BS or higher degree in Electrical Engineering, or related discipline, with 5 or more years of related experience. Additional years of related experience may count as educational equivalency. Will typically have specialized knowledge/experience of one or more aspects of Electrical Engineering such as power systems, circuits, controls, maintenance, etc. May also possess registration as an Electrical Engineer depending on the nature of the assignment.

Core (CPFF)

Electrical Engineer, Senior

Responsible for the study, design, implementation, and/or project management of a wide variety of electrical systems for both facilities and test related apparatus. May be assigned as project manager for complex or multi-discipline projects. Works as a member of test, project and/or maintenance teams to provide electrical engineering expertise. Will typically have direct interaction with research customers, other engineering leads, and/or test/project, facility, or functional managers. May lead other electrical engineers and electricians and provide technical direction or assignments. Typically receives supervision from functional manager.

Typically possesses a BS or higher degree in Electrical Engineering, or related discipline, with 5 or more years of related experience. Additional years of related experience may count as educational equivalency. Will typically have specialized knowledge/experience of one or more aspects of Electrical Engineering such as power systems, circuits, controls, maintenance, etc. May also possess registration as an Electrical Engineer depending on the nature of the assignment.

IDIQ

Electrician Union Responsible for installation, operation, troubleshooting, maintenance and repair of electrical and control systems. Includes both facility and test related systems, which consist of power and electrical distribution components both Low and High Voltage (> 600V). Works as a member of test, project, and/or maintenance teams. Typically receives daily supervision from Lead, Engineering, or functional manager.

Journeyman Level with related education or work experience (typically 3 or more years) in electrical systems. Should have a thorough practical knowledge of electrical and/or control systems.

Core (CPFF)

Electrician Union Responsible for installation, operation, troubleshooting, maintenance and repair of electrical and control systems. Includes both facility and test related systems, which consist of power and electrical distribution components both Low and High Voltage (> 600V). Works as a member of test, project, and/or maintenance teams. Typically receives daily supervision from Lead, Engineering, or functional manager.

Journeyman Level with related education or work experience (typically 3 or more years) in electrical systems. Should have a thorough practical knowledge of electrical and/or control systems.

IDIQ

Electrician, Lead Union

Responsible for installation, operation, troubleshooting, maintenance and repair of electrical and control systems. Includes both facility and test related systems, which consist of power and electrical distribution components both Low and High Voltage (> 600V). Works closely with Electrical Engineers and may provide minor design assistance. Works as a member of test, project, and/or maintenance teams. May lead other Electricians and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) in electrical systems. Thorough practical knowledge of electrical and/or control systems and may have some theoretical background.

Core (CPFF)

Electrician, Lead Union

Responsible for installation, operation, troubleshooting, maintenance and repair of electrical and control systems. Includes both facility and test related systems, which consist of power and electrical distribution components both Low and High Voltage (> 600V). Works closely with Electrical Engineers and may provide minor design assistance. Works as a member of test, project, and/or maintenance teams. May lead other Electricians and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) in electrical systems. Thorough practical knowledge of electrical and/or control systems and may have some theoretical background.

IDIQ

Engineering Technician I Wage Determination

Performs simple routine tasks in a training capacity to support engineering personnel.

Assembles or installs equipment or parts requiring simple wiring, soldering, or connecting.

Performs simple or routine tasks or test such as tensile or hardness tests; operates and adjusts simple test equipment; records test data. Gathers and maintains specified records of engineering data such as tests, drawings, etc.; performs computations by substituting numbers in specified formulas; plots data and draws simple curves and graphs. Works under close supervision or from detailed procedures. Work is checked in progress or on completion.

Typically possesses the ability to understand basic engineering terminology.

College courses in engineering, mathematics, or science desirable. IDIQ

Engineering Technician III Wage Determination

Performs assignments that are not completely standardized or prescribed. Constructs components, subunits, or simple models or adapts standard equipment. May troubleshoot and correct malfunctions. Follows specific layout and scientific diagrams to construct and package simple devices and subunits of equipment. Conducts various test or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurements; selects, sets up, and operates standard test equipment and records test data. Extracts and compiles a variety of engineering data from field notes, manual, lab reports, etc., processes data, identifYing errors of inconsistencies; selects methods of data presentation. Assists in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts. Receives initial instructions, equipment requirement, and advice from supervisor or engineer as needed;

performs recurring work independently.

Typically possesses two (2) years of college with courses in computer science, mathematics, or related engineering courses, plus two (2) years of related experience in data reduction and analysis, or any equivalent combination of relevant education and experience for a total of four (4) years.

IDIQ

Engineering Technician IV Wage Determination

Performs non-routine assignments of substantial variety and complexity, using operational precedents that are not fully applicable Develops or reviews designs by extracting and analyzing a variety of engineering data. Conducts tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures; sets up and operates equipment; records data, measures and records problems of significant complexity that sometimes require resolution at a higher level;

and analyzes data and prepares test reports. Applies methods outlined by others to limited segments of research and development projects; constructs experimental or prototype models to meet engineering requirements; conducts tests or experiments and redesigns as necessary; and records and evaluates data and reports findings.

Receives technical advice from supervisor or engineer; work is reviewed for technical adequacy (or conformity with instructions).

Typically possesses two (2) years of college with courses in computer science, mathematics, or other related engineering courses, plus four (4) years of related engineering experience with some expertise in formulating data for presentation. Additional relevant education may be substituted for a portion of the experience.

IDIQ

Engineering Technician V Wage Determination

Designs, develop, and constructs major units, devices or equipment; conducts test or experiments; analyzes results and redesigns or modifies equipment to improve performance; and reports results. Using general guidelines and specifications, develops designs for equipment without critical performance requirements which are difficult to satisfY such as engine parts, research instruments, or special purpose circuitry. Analyzes technical data to determine applicability to design problems; selects from several possible design layouts; calculates design data; and prepares layouts, detailed specification, parts lists, estimate, procedures, etc. May check and analyze drawings or equipment to determine adequacy of drawings and design. Plans or assists in planning test to evaluate equipment performance. Determines test requirements, equipment modification, and test procedures; conducts tests using all types of instruments; analyzes and evaluates test results, and prepares reports on findings and recommendations.

Supervisor or professional engineer outlines objectives, requirements, and design approaches.

Typically possesess two (2) years of college with course in engineering or associated discipline, and six (6) years of related experience. Position requires comprehensive knowledge of programs gained through long and varied work experience in field of specialty.

Core (CPFF)

Engineering Technician V Wage Determination

Designs, develop, and constructs major units, devices or equipment; conducts test or experiments; analyzes results and redesigns or modifies equipment to improve performance; and reports results. Using general guidelines and specifications, develops designs for equipment without critical performance requirements which are difficult to satisfY such as engine parts, research instruments, or special purpose circuitry. Analyzes technical data to determine applicability to design problems; selects from several possible design layouts; calculates design data; and prepares layouts, detailed specification, parts lists, estimate, procedures, etc. May check and analyze drawings or equipment to determine adequacy of drawings and design. Plans or assists in planning test to evaluate equipment performance. Determines test requirements, equipment modification, and test procedures; conducts tests using all types of instruments; analyzes and evaluates test results, and prepares reports on findings and recommendations.

Supervisor or professional engineer outlines objectives, requirements, and design approaches.

Typically possesess two (2) years of college with course in engineering or associated discipline, and six (6) years of related experience. Position requires comprehensive knowledge of programs gained through long and varied work experience in field of specialty.

IDIQ

Engineering Technician VI Wage Determination

This technician independently plans and accomplishes complete projects or studies of broad scope and complexity, or serves as an expert in a narrow aspect of a particular field of engineering, e.g., environmental factors affecting electronic engineering. Complexity of assignments typically requires considerable creativity and judgment to devise approaches to accomplish work, resolve design and operational problems, and 116make decisions in situations where standard engineering methods, procedures, and techniques may not be applicable. Supervisor or professional engineer provides advice on unusual or controversial problems or policy matters. Completed work is reviewed for compliance with overall project objectives. This worker may supervise or train and be assisted by lower level technicians, and performs, one or a combination of the following: a. Prepares designs and specifications for various complex equipment or systems (e.g., a heating system in an office building, or new electronic components such as solid state devices for instrumentation equipment). b. Plans approach to solve design problems; conceives and recommends new design techniques; resolves design problems with contract personnel, and assures compatibility of design with other parts of the system. c. Designs and coordinates test set-ups and experiments to prove or disprove the feasibility of preliminary design; uses untried and untested measurement techniques; and improves the performance of the equipment. May advise equipment users on redesign to solve unique operational deficiencies. d. Plans approach and conducts various experiments to develop equipment or systems characterized by (a) difficult performance requirements because of conflicting attributes such as versatility, size, and ease of operation; or (b) unusual combination of techniques or components.

Arranges for fabrication of pilot models and determines test procedures and design of special test equipment.

In-depth knowledge and understanding of manufacturing practices, especially as pertains to arc-jet components such as constrictor disks and electrodes.

Understanding of materials and state-of-the-art manufacturing techniques, experience with SolidWorks or other CAD and CAD/CAM software. Experience using machine tools to fabricate complete parts, experience and knowledge of welding and brazing practices and familiarity with resources to provide welding and brazing services. Experience with preparing cost estimates, drafting, sourcing subcontractors, and working with other machinists. A strong background in machine shop operations with significant experience in producing complex machined, welded or brazed components made to high tolerances is required. Requires, as a minimum, 15 years of hands-on experience working in a machine shop environment.

Core (CPFF)

Engineering Technician VI Wage Determination

This technician independently plans and accomplishes complete projects or studies of broad scope and complexity, or serves as an expert in a narrow aspect of a particular field of engineering, e.g., environmental factors affecting electronic engineering. Complexity of assignments typically requires considerable creativity and judgment to devise approaches to accomplish work, resolve design and operational problems, and 116make decisions in situations where standard engineering methods, procedures, and techniques may not be applicable. Supervisor or professional engineer provides advice on unusual or controversial problems or policy matters. Completed work is reviewed for compliance with overall project objectives. This worker may supervise or train and be assisted by lower level technicians, and performs, one or a combination of the following: a. Prepares designs and specifications for various complex equipment or systems (e.g., a heating system in an office building, or new electronic components such as solid state devices for instrumentation equipment). b. Plans approach to solve design problems; conceives and recommends new design techniques; resolves design problems with contract personnel, and assures compatibility of design with other parts of the system. c. Designs and coordinates test set-ups and experiments to prove or disprove the feasibility of preliminary design; uses untried and untested measurement techniques; and improves the performance of the equipment. May advise equipment users on redesign to solve unique operational deficiencies. d. Plans approach and conducts various experiments to develop equipment or systems characterized by (a) difficult performance requirements because of conflicting attributes such as versatility, size, and ease of operation; or (b) unusual combination of techniques or components.

Arranges for fabrication of pilot models and determines test procedures and design of special test equipment.

In-depth knowledge and understanding of manufacturing practices, especially as pertains to arc-jet components such as constrictor disks and electrodes.

Understanding of materials and state-of-the-art manufacturing techniques, experience with SolidWorks or other CAD and CAD/CAM software. Experience using machine tools to fabricate complete parts, experience and knowledge of welding and brazing practices and familiarity with resources to provide welding and brazing services. Experience with preparing cost estimates, drafting, sourcing subcontractors, and working with other machinists. A strong background in machine shop operations with significant experience in producing complex machined, welded or brazed components made to high tolerances is required. Requires, as a minimum, 15 years of hands-on experience working in a machine shop environment.

IDIQ

Instrumentation Engineer

Responsibilities include analyzing customer data acquisition requirements. Plans, configures, and designs appropriate instrumentation complement. Prepares instrumentation drawings, procedures, wiring diagrams, etc. Provides technical oversight for implementation by instrumentation technicians. Ensures data acquisition accuracy and quality. Ensures maintenance and metrology of instrumentation for performance verification. Troubleshoots production problems. Researches new instrumentation tools and techniques. Interfaces with vendors and evaluates new components for data systems.

Typically possesses a Bachelor of Science in an appropriate engineering discipline (electrical, electronic, mechanical, aerospace). Three years applicable experience. Relevant subject areas include sensor technologies, data acquisition systems (both steady state and dynamic), control systems, strain gages, precision pressure measurement, position & angle measurement, accelerometers, temperature measurement, computer-controlled instrumentation, Lab view, video systems, intercom systems, signal conditioning, precision amplifiers, A/D and D/A conversion, metrology, software.

Instrumentation Engineer

Responsibilities include analyzing customer data acquisition requirements. Plans, configures, and designs appropriate instrumentation complement. Prepares instrumentation drawings, procedures, wiring diagrams, etc. Provides technical oversight for implementation by instrumentation technicians. Ensures data acquisition accuracy and quality. Ensures maintenance and metrology of instrumentation for performance verification. Troubleshoots production problems. Researches new instrumentation tools and techniques. Interfaces with vendors and evaluates new components for data systems.

Typically possesses a Bachelor of Science in an appropriate engineering discipline (electrical, electronic, mechanical, aerospace). Three years applicable experience. Relevant subject areas include sensor technologies, data acquisition systems (both steady state and dynamic), control systems, strain gages, precision pressure measurement, position & angle measurement, accelerometers, temperature measurement, computer-controlled instrumentation, Lab view, video systems, intercom systems, signal conditioning, precision amplifiers, A/D and D/A conversion, metrology, software.

IDIQ

Instrumentation Technician Union

Responsible for installation, operation, calibration, troubleshooting, maintenance and repair of instrumentation systems. Includes both facility and test related systems which consist of measurement sensors / control devices, wiring, field interface panels, controllers, transducers, A/D converters, and associated human interface hardware / software.

Works as a member of test, project, and/or maintenance teams. May operate facility/test instrumentation systems during aerospace tests. May be responsible for analyzing and evaluating test data for quality. Typically receives daily supervision from Lead, Engineering, or functional manager.

Journeyman Level with related education or work experience (typically 3 or more years) in instrumentation or electronic systems. Thorough practical knowledge of instrumentation and/or electronic systems. May require some knowledge/experience of computerized DAS/Control systems.

Core (CPFF)

Instrumentation Technician, Lead Union

Responsible for installation, operation, calibration, troubleshooting, maintenance and repair of instrumentation systems. Includes both facility and test related systems which consist of measurement sensors / control devices, wiring, field interface panels, controllers, transducers, A/D converters, and associated human interface hardware / software.

Works closely with Instrumentation / Controls Engineers and may provide minor design assistance. Works as a member of test, project, and/or maintenance teams. May operate facility/test instrumentation systems during aerospace tests. May be responsible for analyzing and evaluating test data for quality. May lead other Instrumentation Technicians and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) in instrumentation systems. Thorough practical knowledge of instrumentation systems and may have some theoretical background. May require some knowledge/experience of computerized DAS/Control systems.

IDIQ

Instrumentation Technician, Lead Union

Responsible for installation, operation, calibration, troubleshooting, maintenance and repair of instrumentation systems. Includes both facility and test related systems which consist of measurement sensors / control devices, wiring, field interface panels, controllers, transducers, A/D converters, and associated human interface hardware / software.

Works closely with Instrumentation / Controls Engineers and may provide minor design assistance. Works as a member of test, project, and/or maintenance teams. May operate facility/test instrumentation systems during aerospace tests. May be responsible for analyzing and evaluating test data for quality. May lead other Instrumentation Technicians and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) in instrumentation systems. Thorough practical knowledge of instrumentation systems and may have some theoretical background. May require some knowledge/experience of computerized DAS/Control systems.

Core (CPFF)

Mechanic Union Responsible for installation, operation, troubleshooting, maintenance and repair of mechanical systems. Includes both facility and test related systems, which consist of machinery, test apparatus/models and other mechanical equipment. May assist Operating Engineers in the operation of facilities. Works as a member of test, project and/or maintenance teams. Typically receives daily supervision from Lead, Engineering, or functional manager.

Journeyman Level with related education or work experience (typically 3 or more years) in mechanical systems. Thorough practical knowledge of mechanical systems.

Core (CPFF)

Mechanic Union Responsible for installation, operation, troubleshooting, maintenance and repair of mechanical systems. Includes both facility and test related systems, which consist of machinery, test apparatus/models and other mechanical equipment. May assist Operating Engineers in the operation of facilities. Works as a member of test, project and/or maintenance teams. Typically receives daily supervision from Lead, Engineering, or functional manager.

Journeyman Level with related education or work experience (typically 3 or more years) in mechanical systems. Thorough practical knowledge of mechanical systems.

IDIQ

Mechanic, Lead Union

Responsible for installation, operation, troubleshooting, maintenance and repair of mechanical systems. Includes both facility and test related systems, which consist of machinery, test apparatus/models and other mechanical equipment. May assist Operating Engineers in the operation of facilities. Works closely with Mechanical Engineers and may provide minor design assistance. Works as a member of test, project, and/or maintenance teams. May lead other machinists and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) in mechanical systems. Thorough practical knowledge of mechanical systems and may have some theoretical background.

Core (CPFF)

Mechanic, Lead Union

Responsible for installation, operation, troubleshooting, maintenance and repair of mechanical systems. Includes both facility and test related systems, which consist of machinery, test apparatus/models and other mechanical equipment. May assist Operating Engineers in the operation of facilities. Works closely with Mechanical Engineers and may provide minor design assistance. Works as a member of test, project, and/or maintenance teams. May lead other machinists and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) in mechanical systems. Thorough practical knowledge of mechanical systems and may have some theoretical background.

IDIQ

Mechanical Engineer

Responsible for the study, design, implementation, and/or project management of mechanical systems for both facilities and test related apparatus. Depending on capabilities, may be assigned project management responsibilities. Works as a member of test, project and/or maintenance teams to provide mechanical engineering support. May have direct interaction with research customers, other engineers, and/or test/project, facility, or functional managers. May lead machinists and provide technical direction or assignments. Typically receives supervision from Senior Engineer or functional manager.

Typically possesses a BS or higher degree in Mechanical Engineering, or related discipline, with entry level to 5 or more years of related experience.

Additional years of related experience may count as educational equivalency.

May have some specialized knowledge of one or more aspects of Mechanical Engineering such as machine design, thermodynamics, controls, maintenance, etc.

Core (CPFF)

Mechanical Engineer

Responsible for the study, design, implementation, and/or project management of mechanical systems for both facilities and test related apparatus. Depending on capabilities, may be assigned project management responsibilities. Works as a member of test, project and/or maintenance teams to provide mechanical engineering support. May have direct interaction with research customers, other engineers, and/or test/project, facility, or functional managers. May lead machinists and provide technical direction or assignments. Typically receives supervision from Senior Engineer or functional manager.

Typically possesses a BS or higher degree in Mechanical Engineering, or related discipline, with entry level to 5 or more years of related experience.

Additional years of related experience may count as educational equivalency.

May have some specialized knowledge of one or more aspects of Mechanical Engineering such as machine design, thermodynamics, controls, maintenance, etc.

IDIQ

Mechanical Engineer, Senior

Responsible for the study, design, implementation, and/or project management of a wide variety of mechanical systems for both facilities and test related apparatus. May be assigned as project manager for complex or multi-discipline projects. Works as a member of test, project and/or maintenance teams to provide mechanical engineering expertise. Will typically have direct interaction with research customers, other engineering leads, and/or test/project, facility, or functional managers. May lead other mechanical engineers and machinists and provide technical direction or assignments. Typically receives supervision from functional manager.

Typically possesses a BS or higher degree in Mechanical Engineering, or related discipline, with 5 or more years of related experience. Additional years of related experience may count as educational equivalency. Will typically have specialized knowledge/experience of one or more aspects of Mechanical Engineering such as machine design, thermodynamics, controls, maintenance, etc. May also possess registration as an Mechanical Engineer depending on the nature of the assignment.

Core (CPFF)

Mechanical Engineer, Senior

Responsible for the study, design, implementation, and/or project management of a wide variety of mechanical systems for both facilities and test related apparatus. May be assigned as project manager for complex or multi-discipline projects. Works as a member of test, project and/or maintenance teams to provide mechanical engineering expertise. Will typically have direct interaction with research customers, other engineering leads, and/or test/project, facility, or functional managers. May lead other mechanical engineers and machinists and provide technical direction or assignments. Typically receives supervision from functional manager.

Typically possesses a BS or higher degree in Mechanical Engineering, or related discipline, with 5 or more years of related experience. Additional years of related experience may count as educational equivalency. Will typically have specialized knowledge/experience of one or more aspects of Mechanical Engineering such as machine design, thermodynamics, controls, maintenance, etc. May also possess registration as an Mechanical Engineer depending on the nature of the assignment.

IDIQ

Operating Engineer Union

Responsible for operation of systems/facilities of high potential energy (electrical and/or mechanical). Includes both facility and test related systems. Performs stationary engineering duties for high pressure air and steam boiler systems. Operates central console systems to allow facilities to function. May perform some installation, troubleshooting, maintenance and repair activities if needed. Works closely with Test/Project Engineers and/or facility operators to coordinate operations. Works as a member of test and/or project teams. Typically receives daily supervision from Lead, Engineering, or functional manager.

Journeyman Level with related education or work experience (typically 3 or more years) as an operating or stationary engineer. Thorough practical knowledge operating systems and facility components with some theoretical background. Some knowledge/experience with computerized operating systems.

Core (CPFF)

Operating Engineer Union

Responsible for operation of systems/facilities of high potential energy (electrical and/or mechanical). Includes both facility and test related systems. Performs stationary engineering duties for high pressure air and steam boiler systems. Operates central console systems to allow facilities to function. May perform some installation, troubleshooting, maintenance and repair activities if needed. Works closely with Test/Project Engineers and/or facility operators to coordinate operations. Works as a member of test and/or project teams. Typically receives daily supervision from Lead, Engineering, or functional manager.

Journeyman Level with related education or work experience (typically 3 or more years) as an operating or stationary engineer. Thorough practical knowledge operating systems and facility components with some theoretical background. Some knowledge/experience with computerized operating systems.

IDIQ

Operating Engineer, Lead Union

Responsible for operation of systems/facilities of high potential energy (electrical and/or mechanical). Includes both facility and test related systems. Performs stationary engineering duties for high pressure air and steam boiler systems. Operates central console systems to allow facilities to function. May perform some installation, troubleshooting, maintenance and repair activities if needed. Works closely with Test/Project Engineers and/or facility operators to coordinate operations. Works as a member of test and/or project teams. May lead other Operating Engineers and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) as an Operating or Stationary Engineer. Thorough practical knowledge operating systems and facility components and may have some theoretical background. Some knowledge/experience with computerized operating systems.

Operating Engineer, Lead Union

Responsible for operation of systems/facilities of high potential energy (electrical and/or mechanical). Includes both facility and test related systems. Performs stationary engineering duties for high pressure air and steam boiler systems. Operates central console systems to allow facilities to function. May perform some installation, troubleshooting, maintenance and repair activities if needed. Works closely with Test/Project Engineers and/or facility operators to coordinate operations. Works as a member of test and/or project teams. May lead other Operating Engineers and provide technical direction or assignments. Typically receives daily supervision from engineering or functional manager.

Journeyman Level with additional related education or work experience (typically 5 or more years) as an Operating or Stationary Engineer. Thorough practical knowledge operating systems and facility components and may have some theoretical background. Some knowledge/experience with computerized operating systems.

IDIQ

Programmer Analyst IV Modifies and writes routine engineering computer programs using established techniques, standards, and procedures. Codes, tests, and maintains computer programs using established techniques and procedures. Assists in the development of computer program documentation and operational procedures.

BS degree in a related discipline or any equivalent combination of education, experience,training and certification. Core (CPFF)

Safety Engineer

Responsible for the study, analysis and recommendation of risk mitigation for aerospace testing and development projects. Works as a member of test, project and/or maintenance teams to provide system safety engineering support. Responsible for performing Operational Hazard Analysis, Failure Mode Effect Analysis (FMEA) and other formal risk analysis techniques. Recommends improvements to facility systems and test apparatus to increase safety and reliability. May lead Industrial Safety Engineers, and/or staff and provide technical direction or assignments. Typically receives supervision from Senior Engineer or functional manager.

Typically possesses a BS or higher degree in Safety Engineering or other related engineering discipline with entry level to 5 or more years of related experience. Additional years of related experience may count as educational equivalency. May have some specialized knowledge/experience of one or more aspects related to System Safety Engineering.

Core (CPFF)

Software Engineer, Senior

Work as a team member providing technical engineering support for wind tunnel and related research projects conducted by the Experimental Aero-Physics Branch (Code AOX). Develop a data reduction application which has the following characteristics: Implements a data reduction pipeline which processes image data and associated metadata through a series of operations defined by the user. The application tracks the progress of images through the pipeline and gives the user the ability to control the options and order for the individual data reduction operations. Allows the user to visualize image data in the data reduction pipeline.

Allows the user to visualize surface data displayed on a three-dimensional wind tunnel model.

Allows the user to edit image data and metadata within the data reduction pipeline. Calls externally-developed code modules which implement the individual data reduction operations. The externally-developed modules may be written in another language (e.g. Python, C++, Matlab) but will adhere to interface standards created by the developer.

Is developed in a Linux environment and is expected to primarily operate in a Linux environment, but is cross-platform to the extent that it can run under Windows.

Must be familiar with the following languages/libraries/programming environments: Python and C++, Matlab, OpenCV. Must be familiar with application development in a Linux operation system. Should be familiar with application development in a Windows operating system. Must be familiar with image processing. Must be familiar with grid generation and grid manipulation.

Must be familiar with creating Graphical User Interfaces (GUIs) for both processing and analyzing of data. Must be able to write clear, well-defined software interface specifications for use by outside developers. Must be able to document software products produced. Typically possesses a BS or higher degree in Computer Engineering, or related discipline, with 5 or more years of related experience. Additional years of related experience may count as educational equivalency.

Core (CPFF)

Software Engineer, Senior

Work as a team member providing technical engineering support for wind tunnel and related research projects conducted by the Experimental Aero-Physics Branch (Code AOX). Develop a data reduction application which has the following characteristics: Implements a data reduction pipeline which processes image data and associated metadata through a series of operations defined by the user. The application tracks the progress of images through the pipeline and gives the user the ability to control the options and order for the individual data reduction operations. Allows the user to visualize image data in the data reduction pipeline.

Allows the user to visualize surface data displayed on a three-dimensional wind tunnel model.

Allows the user to edit image data and metadata within the data reduction pipeline. Calls externally-developed code modules which implement the individual data reduction operations. The externally-developed modules may be written in another language (e.g. Python, C++, Matlab) but will adhere to interface standards created by the developer.

Is developed in a Linux environment and is expected to primarily operate in a Linux environment, but is cross-platform to the extent that it can run under Windows.

Must be familiar with the following languages/libraries/programming environments: Python and C++, Matlab, OpenCV. Must be familiar with application development in a Linux operation system. Should be familiar with application development in a Windows operating system. Must be familiar with image processing. Must be familiar with grid generation and grid manipulation.

Must be familiar with creating Graphical User Interfaces (GUIs) for both processing and analyzing of data. Must be able to write clear, well-defined software interface specifications for use by outside developers. Must be able to document software products produced. Typically possesses a BS or higher degree in Computer Engineering, or related discipline, with 5 or more years of related experience. Additional years of related experience may count as educational equivalency.

IDIQ

Supply Technician Wage Determination Performs limited aspects of technical supply management work (e.g., inventory management, storage management, cataloging, and property utilization) related to depot, local, or other supply activities. Work usually is segregated by commodity area or function, and controlled in terms of difficulty, complexity, or responsibility.