ITB_40100-14035_Amendment_1_-_Questions_and_Comments.pdf

PDF 129 KB Posted

Attached to
TDOT Televisions and Mounts - UPDATED
Solicitation number
Event 40100-14035
Issued by
Davidson County, Tennessee

About this file

This Amendment #1 document addresses questions and comments submitted regarding Tennessee Department of Transportation (TDOT) ITB #40100-14035 for televisions and mounting brackets. TDOT is establishing a five-year Agency Term Contract for the supply of 55-inch or 65-inch flat-panel LED televisions and compatible mounting brackets on an as-needed basis. The solicitation does not mandate specific manufacturer models; respondents may propose any televisions meeting the outlined technical specifications in Section E, including 4K resolution, three HDMI inputs, USB 2.0 connectivity, wireless and wired network capabilities, and wireless screen casting functionality. Mounting brackets must provide full-motion tilt and swivel capabilities compatible with proposed television products. The Questions and Comments deadline was October 28, 2026, with responses provided by November 12, 2026. Bid responses were due November 6, 2026 at 2:00 p.m. CST. The contract term spans five years with no guaranteed purchase quantities, as TDOT will issue purchase orders on an as-needed basis. Installation services are excluded from the scope, with TDOT handling installation separately.

All quoted prices must remain firm for 365 days from contract execution, after which contractors may request price increases subject to defined adjustment mechanisms outlined in the Terms and Conditions Section 7.2. The contractor must obtain prior written approval from TDOT before utilizing subcontractors for any goods or services, including authorized distributors and freight carriers. Contractors are required to maintain commercial general liability insurance of at least one million dollars per occurrence and two million dollars aggregate, plus one million dollars in workers' compensation coverage. Automobile liability insurance with a combined single limit of at least one million dollars must cover liability arising from owned, leased, hired, and non-owned automobiles. The solicitation does not specify Trade Agreements Act (TAA) compliance requirements; however, Section 8.36 of the Terms and Conditions addresses Tennessee Public Chapter 768 (2026) foreign adversary company attestation requirements. Award is made to the lowest-cost responsive and responsible respondent, with all equipment shipped FOB Destination and the contractor bearing full responsibility for transportation, packing, handling, and insurance.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ITB # 40100-14035 – Questions & Comments Page 1 of 3

STATE OF TENNESSEE

DEPARTMENT OF TRANSPORTATION

INVITATION TO BID (ITB) # 40100-14035

AMENDMENT #1 FOR TVS AND MOUNTS

DATE:

ITB # 40100-14035 IS AMENDED AS FOLLOWS:

1. This ITB Schedule of Events updates and confirms scheduled ITB dates. Any event, time, or date containing revised or new text is highlighted.

Event Start Date October 14, 2026

Questions and Comments Due October 28, 2026

Response Deadline November 12, 2026

2. State responses to questions and comments in the table below amend and clarify this ITB.

Any restatement of ITB text in the Question/Comment column shall NOT be construed as a change in the actual wording of the ITB document.

ITB Section Question/Comment

Answer

Specifications

The LG 65UR640S9UD and 55UP8000PUA/R models are discontinued or plan to be discontinued. Are current model year equivalents permitted? / Are there exceptions or acceptable alternatives? / May bidders offer the current LG models that replace them, with the same sizes and features?

The model numbers and any other manufacturer’s specific information listed in Edison are from products used in the prior contract and were retained for reference purposes only. Respondents are not required to provide the specific models listed and should disregard those model numbers when preparing their bids.

Per the Specifications document, respondents may propose any 55-inch or 65-inch flat-screen television that meets or exceeds the technical requirements outlined in Section E of the Specifications document. The listed model numbers are not intended to restrict the brands or models that may be offered.

Specifications The pricing schedule has one mount line, but the specification includes tilting and full-motion tilt/swivel mounts. Must one offered model satisfy both, or how should the two types be priced?

Please see updates to the Specifications document.

Section E. ii. has been updated to:

The Contractor shall provide the State with full-motion television-mounting brackets, with tilt and swivel capabilities as requested by the State via purchase order.

ITB # 40100-14035 – Questions & Comments Page 2 of 3

Specifications

The event displays November 11 delivery dates while describing five years of as-needed orders. Is November 11 a binding first delivery requirement? What delivery time applies to later POs?

November 11, 2026, is listed as a shipping date in the Edison event. Please disregard this date, along with any shipping, model number, or manufacturer-specific information displayed in Edison. This information was carried over from products associated with the previous contract and does not apply to this solicitation.

Per Section D of the Specifications document, the State will issue purchase orders to the Contractor on an as-needed basis throughout the contract term.

Terms and Conditions

Must unit prices remain unchanged for all 60 months, or is a defined adjustment mechanism permitted? How are discontinued models replaced during the term?

No, price change language (for increases or decreases) is included in the Terms and Conditions under section 7.2.

Contractor may request a price increase after the firm price period of 365 days.

Discontinued models do not need to formally be replaced.

Per the Specifications, respondents may provide any 55-inch or 65-inch flat-screen television that meets or exceeds the technical requirements outlined in Section E of the Specifications document. The listed model numbers are not intended to restrict the brands or models that may be offered.

Terms and Conditions

May contractors fulfill orders through an authorized distributor and freight carrier, and must these parties be identified/approved as subcontractors?

Please refer to Section 8.10, Assignment and Subcontracting, of the Terms and Conditions. Contractors must obtain prior written approval from the State before subcontracting any goods or services provided under the Contract.

Additionally, the solicitation includes a mandatory question requiring respondents to indicate whether they anticipate using subcontractors. Respondents who select “Yes” must identify their proposed subcontractors and provide the requested contact information with their bid. Respondents who select “No” agree to request approval before utilizing any subcontractors during the contract term.

Regardless of any approved subcontracting arrangements, the awarded Contractor remains responsible for fulfilling all contractual obligations.

Conditions

If I lease a company vehicle how do I verify insurance requirements? Is it okay to use the company I'm renting from? Or do I have to get a separate policy with those limits to properly qualify for bid submission?

Please refer to Section 9.1.4, Automobile Liability Insurance, of the Terms and Conditions. The Contractor is required to maintain automobile liability coverage with a combined single limit of at least $1 million, and that coverage must “cover liability arising out of any automobile (including owned, leased, hired, and non-owned automobiles).” Therefore, the Contractor itself (and not the lessor of Contractor’s vehicles) will be required to procure and maintain this coverage under a contract awarded pursuant to the ITB.

ITB # 40100-14035 – Questions & Comments Page 3 of 3

Conditions

I don't see any requirements in the documentation for the Televisions or Mounts requested in the bid to be TAA compliant or for them to meet the TPPA (Tennessee Procurement Protection Act) requirements.

Are you aware of any such requirements?

The solicitation does not specify a Trade Agreements Act (TAA) compliance requirement for the televisions or mounting brackets.

Regarding the Tennessee Procurement Protection Act (TPPA), please refer to Section 8.36, Foreign Adversary Company Attestation, of the Terms and Conditions, which addresses the requirements of Tennessee Public Chapter 768 (2026).

Specifications

Over the 5-year term, manufacturers will change models. When a model is discontinued, may the contractor substitute the successor model at the same or lower contract price?

Yes, the contractor may provide any 55-inch or 65-inch flat-screen television that meets or exceeds the technical requirements outlined in Section E of the Specifications document.

The model numbers and any other manufacturer’s specific information listed in Edison are from products used in the prior contract and were retained for reference purposes only. Respondents are not required to provide the specific models listed and should disregard those model numbers when preparing their bids.

Specifications

So, the TDOT wants a one-time purchase or pricing for 5 years?

TDOT is seeking to establish a five-year Agency Term Contract for televisions and mounting brackets, rather than make a one-time purchase. Respondents should submit pricing for the items listed in the solicitation's pricing schedule. Upon award, TDOT will issue purchase orders on an as-needed basis throughout the contract term. There is no guaranteed purchase quantity.

General Is TDOT also looking for a contractor to install these displays, or will installation be handled separately?

Installation services are not included in the scope of this solicitation. The Contractor will be responsible for supplying and delivering the televisions and mounting brackets in accordance with the Specifications and Terms and Conditions. TDOT will handle installation separately.

3. Delete ITB Specifications in its entirety and insert the following in its place (any sentence or paragraph containing revised or new text is highlighted):

ITB 40100-14035 TVs and Mounts Specifications v2

4. ITB Amendment Effective Date. The revisions set forth herein shall be effective upon release. All other terms and conditions of this ITB not expressly amended herein shall remain in full force and effect.

File details come from the government source that posted it. Updated .