ISB Window Replacement SOW.pdf

ZLC: Salt Lake City ARTCC

Title: Interim Service Building (ISB) Window Replacement

Scope of Work (SOW): At the Salt Lake Air Route Traffic Center 2150 West 700 North, Salt Lake City, Utah, 84116.

The Federal Aviation Administration (FAA) requires that the contractor provide the following:

• Complete Construction Services for the demolition and installation of 50 sliding glass windows. A description of the work that needs to be completed is found below.

o Note: Refer to the pdf document titled “ISB Window Replacement Drawing Mark-

Ups and Specs” as it pertains to this scope of work.

• Demolition o Sliding Glass Windows Demolish and dispose of the following windows.

• 24-3’x3’ Sliding glass windows

• 1-3’x6’ Sliding glass window

• 22-4’x6’ Sliding glass windows

• 2-4’x10’ Sliding glass window

• 1-4’x3’ Sliding glass window

See the following ISB and AAS Building for as-built drawings and mark-ups for identified windows to be demolished.

• “North Elevation”

• “South Elevation

• “East Elevation”

• “West Elevation”

• Window Details page 1

• Window Details page 2

• Installation o Sliding Glass Windows Install the following new windows and window sizes:

• 24-3’x3’ Sliding glass windows

• 1-3’x6’ Sliding glass window

• 22-4’x6’ Sliding glass windows

• 2-4’x10’ Sliding glass window

• 1-4’x3’ Sliding glass window

See the following ISB and AAS Building as-built drawing mark-ups for identified windows to be installed.

• “North Elevation”

• “South Elevation

• “East Elevation”

• “West Elevation

New windows to be installed are to be Commercial Windows are to be set in black colored vinyl frames:

• Product Standard: Comply with AAMA/WDMA/CSA 101/I.S.2/A440 for definitions and minimum standards of performance, materials, components, accessories, and fabrication unless more stringent requirements are indicated.

• Performance Class and Grade: AAMA/WDMA/CSA 101/I.S.2/A440 as follows:

• Minimum Performance Class: CW Refer to the following specification for details:

o SECTION 085313-VINYL WINDOWS

• Closeout o Provide warranty, specifications, and as-built project record documents at the completion of the project.

o Refer to the following specifications for details:

SECTION 017700-CLOSEOUT PROCEDURES

SECTION 017839-PROJECT RECORD DOCUMENTS

General Requirements:

All sizes, dimensions, quantities are approximations only. Contractor is responsible to verify all sizes, dimensions, and quantities.

All work will be completed in compliance with the latest building codes and Authority Having Jurisdiction (AHJ) (i.e. building, plumbing, electrical, and mechanical, etc.).

End of Scope of Work