ICD for Overhead Crane Switch to EMM Inhibit Rev Gen1.pdf
PDF 560 KB Posted
- Attached to
- Modifications to C130 Simulator Building Federal contract opportunity
- Solicitation number
- W50S8W20R0011
- Issued by
- Department of the Army National Guard
About this file
This interface control document outlines the electrical interface requirements for connecting an overhead crane switch to an electro-mechanical motion system. It provides details on the customer interface panel and connectors on the EMM system, including that connectors J15-J19 are interfaced to by the user. A DEU-9P-FO male connector is required, and the document specifies the part numbers for the mating connector components. It also lists the pin-out for connectors J15-J19, noting that the user must provide a dry contact across the specified pins, with the overhead crane switch installed at the parked position and normally closed. Opening the contacts when the crane moves will inhibit motion.
The related federal contract opportunity is a solicitation for design-build modifications to a C130 simulator building at the Wyoming Air National Guard. Proposed work is between $250,000-$500,000. Quotes are due September 21, 2020 and questions by September 10. A site visit is scheduled for September 1. An entry authority list is required by August 31 for site access.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Original Bldg Fire Suppression Drawings.pdf | ||
| 2020-09-15 DPEZ182200 ADDENDUM 1 REPAIR SIM FAC FOR DELIVERY BRIDGING DOCS.pdf | ||
| B.08 Solicitation 20R0011 Amendment.pdf | ||
| Original Bldg Fire Alarm Drawings.pdf | ||
| Questions and Answers Compiled DPEZ182200 Repair SIM Bldg.pdf | ||
| DPEZ182200 Site Visit Sign In Sheets.pdf | ||
| 153aw Form 10 EAL SIM Building Site Visit.pdf | ||
| Wage Determination.pdf | ||
| Specification 2020-08-13 - Compiled.pdf | ||
| B.08 Solicitation 20R0011.pdf | ||
| BE0075 POWER DIAGRAM 14 Aug 2020.pdf | ||
| BRIDGING DOCS.pdf | ||
| BE0075-TFR-001 Rev - 9 Jan 2020.pdf |
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
21 March 2012
Interface Control Document
Overhead Crane Switch to EMM Inhibit Connection Details
Prepared by CAE Inc
21 Mar 2012 2 Rev. -
Introduction This Interface Control Document details the electrical interface for an overhead crane switch to the Electro-Mechanical Motion system (EMM).
EMM System: PS422000075830
EMM System The drawing below illustrates the customer interface panel of the EMM system and the connector identification.
Electrical Connector Details The following section details the interface connectors on the EMM system and the associated mating connector specifications.
Connector J15-J19 Interfaced to by User.
Connector Type: DEU-9P-FO Gender: Male
21 Mar 2012 3 Rev. -
Mating Connector for J15-J19 The table below lists the components required to build one [1] mating connector.
Item Description Part Number Quantity 1 EMI/RFI Backshell PS424571015156 1 2 9P D-sub PS413903025155 1 3 Male Jackscrew PS413904045156 2 4 Contact Pin PS85492015156 9
Connector Pin-Out for J15-J19 The table below shows the pin-out of the EMM inhibit connectors. The user shall provide a dry-contact (i.e., overhead crane switch) across the pins below. The overhead crane switch can be installed at the parked position and the contacts will be Normally Closed. Once the crane moves from its parked position, the contacts will open, inhibiting motion.
Pin Signal 1 24Vdc 2 Inhibit to PLC S4-Input
21 Mar 2012 4 Rev. -
APPENDIX A
COMPONENT SPECIFICATIONS
21 Mar 2012 5 Rev. -
21 Mar 2012 6 Rev. -
21 Mar 2012 7 Rev. -
21 Mar 2012 8 Rev. -
21 Mar 2012 9 Rev. -
File details come from the government source that posted it. Updated .