Amend_A00005_HSCG40-16-R-60021_Crane_-_Questions.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES 1 2

2. AMENDMENT/MODIFICAITON NO.

A00005

3. EFFECTIVE DATE

03/25/16

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE USCG Surface Forces Logistics Center

CPD3-SSP-ISVS

707 E. Ordnance Road, Suite 410 Baltimore, MD 21226 e-mail: Linda.B.Lassiter@ucsg.mil

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICIATION NO.

HSCG40-16-R-60021

9B. DATED (SEE ITEM 11)

02/18/16

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 11)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a)By completing items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPIRATION DATA (If required)

N/A

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

See Attached Page 2

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print) Kelly Wyatt

Contracting Officer

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243 mailto:Linda.B.Lassiter@ucsg.mil

Page | 2

Solicitation No: HSCG40-16-R-60021 Amendment No: A00005

14A. Amendment A00005 is issued to respond to the following questions submitted in response to this solicitation:

QUESTION: The procurement specification (Attachment J.1) references both a maximum boom angle of +80 degrees and +77 degrees, and both minimum angles of 0 degrees and -10 degrees.

Please clarify the desired range for boom travel.

ANSWER: To clarify the boom travel range shall be in accordance with the procurement specification, paragraph 3.4.1.a. The crane shall operate at boom luff elevations of -10 degrees (below horizontal) to not less than 80 degrees (above horizontal)…

QUESTION: Page 23 of Attachment J.1 to the original solicitation states: “3.7.1.c. A stainless steel rating plate with the API Monogram applied shall be provided for field installation on the crane pedestal.” The amendment appears to call this a label now, specifically, “…with the API Label applied…” Please clarify on what is specified. Is the API Monogram required, or is the label intended only to show specified information as per the API standards?

ANSWER: The API Monogram label plate shall not be required for the crane. The Crane shall be certified to API Specification 2C. Make the following change to the procurement specification. Paragraph 3.7.1.c. delete “…with the API Monogram applied…” The paragraph shall now read “3.7.1.c A stainless steel rating plate shall be provided for field installation on the crane pedestal.”

QUESTION: Is there a possibility of getting an extension?

ANSWER: The due date for receipt of proposals remains unchanged.

14B. Offerors are required to sign and return one copy of this Amendment with their proposal.

Failure to return a signed copy may render the proposal unacceptable and the proposal may be eliminated from further consideration.

14C. The due date for receipt of proposals remains unchanged. The due date for receipt of proposals is April 12, 2016 at 2:00 PM EST.

(END OF AMENDMENT NUMBER A00005)