REVISED Addenda 01- Product Description FARCO HDPE.pdf

PRODUCT DESCRIPTION

Naval Special Warfare Command

CQC Rubber Tile Replacement JEBFS FARCO High Density Polyethylene (HDPE)

1. BACKGROUND: Currently the bullet containment system Close Combat Training Facility at the Joint Expeditionary

Base Fort Story requires maintenance. Rubber belting is required to maintain and sustain the AR500 ½” ballistic steel plates. NSW Range Enterprise is standardizing all Close Quarter Combat training facilities with flip-lock rubber tile, 2’ x 2” x 2” flip-lock rubber tiles as part of the containment system. High Density Polyethylene (HDPE) furring is required to provide standoff between rubber tiles and ballistic steel in order to catch bullet fragments and splinters.

2. OBJECTIVE: Establish a contract to provide materiel for HDPE furring for two east coast range sites. The award of a contracting vehicle will include the base award for the Single-Story Close Quarter Combat training facility and the Multi-Story Close Quarter Combat Training Facility. Both facilities are located at Fort Story, Virginia.

3. DESCRIPTION OF REQUIREMENT

3.1. Product Name: FARCO HDPE 10% LE GF HDB 1.5 -45GF2 composite

3.2. Description and Capabilities: “HDPE 10% LE GF HDB 1.5 -45GF2 composite is proprietary material made only by FARCO Plastic. **This material is the only authorized material that meets specific safety requirements in a live fire training environment, no substitutions.**”

3.3. Specifications/Salient Characteristics: The FARCO plastic was tested against other similar materials and was deemed superior in its ability to absorb high power rifle and pistol bullet impacts while mitigating potential ricochet, splintering or destruction of the materiel. The proprietary materiel composition used by FARCOP optimally protects shooters from bullets and fragmentations from hitting ballistic steel plates and returning or straying. The plastic is proven to be highly effective by encapsulating the bullet fragments and aids in hazardous material clean up. Existing panels of same type are currently being used and new material must be compatible in all aspects including form, fit, functionality

3.4. Quantity: FARCO HDPE 10% LE GF HDB 1.5 -45GF2 composite shall include DESCRIPTION Manufacturer Part Number U/I QTY HDPE strips approx. 2” x 4” x 96” N/A EA 5915

4. DELIVERY INFORMATION

4.1. Required delivery date: 90 days after award

4.2. Delivery POC Name: Ronnie Blevins, 757-763-2405 Ronnie.blevins@socom.mil

4.3. Delivery address: Joint Expeditionary Base Fort Story, Virginia Beach, VA 23451.

4.4. Special instructions: Contractor shall coordinate with point of contact relating to base access and specific delivery location and instructions.

5. QUALITY ASSURANCE

5.1. The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms to include proper delivery of quantity and type of goods. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.