H92222-14-R-0017_Amendment_02.pdf

H92222-14-R-0017

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this Amendment 02 is to revise the attachment dates under Section J List of Documents, Exhibits and Other Attachments, revise the due date for Past Performance Questionnaires under Attachment 2, revise Attachment 3 Price Matrix, revise Attachment 1 Performance Specification, and revise Sections L&M of the RFP. The term "SRW" is added to the Description of CLINs 0001-0002 and 1001-1002. The term "Commercial" is removed from the Description of CLINs 0001-0002 and 1001-1002. Year 1 ordering is also removed from all CLINs. CLINs 0006 and 1006 Exhibit D and all references to P3I are removed from this Solicitation. All revisions or added text are in red, w ith deleted text in strikethrough format, w ith the exception of Attachment 3 Price Matrix. A tab titled "Amend 02 Revisions" is included in the Attachment 3 Price Matrix to detail the changes made to that specific document.

The RFP proposal receipt date is extended to 1:00 PM EST, 5 January 2015.

1. CONTRACT ID CODE PAGE OF PAGES

U 1 37

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 24-Nov-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X H92222-14-R-0017

X 9B. DATED (SEE ITEM 11)

05-Nov-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

24-Nov-2014

CODE

HQ USSOCOM SORDAC-K

ATTN: LEATRICE FREDERICK

7701 TAMPA POINT BLVD

MACDILL AFB FL 33621

H92222 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 12-Nov-2014 02:30 PM to 25-Nov-2014 02:30 PM.

The solicitation issue date has changed from 07-Oct-2014 to 05-Nov-2014.

The following have been modified:

MINIMUM/MAXIMUM

MIN/MAX DESCRIPTION

An Indefinite Delivery Indefinite Quantity (IDIQ) contract for supplies and incidental services over a five (5) year ordering period to include a one (1) year option for a total of six year ordering periods. The Government may issue Delivery Orders on a Firm Fixed Price (FFP) or Cost Plus Fixed Fee (CPFF) basis. The minimum contract value is $2,500.00. The Government anticipates ordering approximately a combined total of 26,000 Urban and Maritime radios during the life of this contract. There are NO orders guaranteed above the stated minimum.

Contract Minimum. The contract minimum amount is $2500.00.

Contract Maximum. The maximum (total) dollar value is $390M.

Dollar Values have been included for each basic contract CLIN for purposes of the Government procurement systems ONLY. There are no minimum or maximum dollar values established at the CLIN level for this contract.

To facilitate Delivery Order execution the items listed in the solicitation for Accessories/Spare Parts, Training and Repairs and Pre-Planned Improvements (P3I) outlined within Contract Line Item Numbers (CLINs, 0003, 0004, and 0005 and 0006) have been structured within contract Exhibits A-DC as Exhibit Line Item Numbers (ELINs).

Pricing listed at the CLINS and ELINs are for the following time frames:

Year 1 Ordering Period 1 Pricing –2015 to 2016 Other than initial contract minimum, no awards anticipated under the Year 1 Ordering Period.

Year 2 Ordering Period 2 Pricing –2016 to 2017 Year 3 Ordering Period 3 Pricing - 2017 to 2018 Year 4 Ordering Period 4 Pricing –2018 to 2019 Year 5 Ordering Period 5 Pricing –2019 to 2020 Option Year Ordering Period 6 Pricing – 2020 to 2021

All hardware CLINs shall be ordered by using the ordering range unit prices on a per order basis and are not cumulative unless the hardware CLINs are ordered within a 30 day period (window). Identical CLINs ordered may be priced at the cumulative quantity price for the appropriate range ordered within a 30-day period. As an example, if the Government ordered 40 STC NGHH Radio Systems (CLIN 0001) on April 1st, and then ordered an additional 20 STC NGHH Radio Systems on April 25th, the price per unit would be based on the cumulative quantity of 60 radios ordered from that price range. If there is a price break at quantity 50, then the entire 60 would receive the 50 quantity price. The Government may apply the credit due for the reduction of the 1st order price as 1) a delivery order modification to the first order or 2) as a one-time reduction to the second order pricing. Please note that if a third order is placed on May 15th, it would not qualify for the cumulative quantity pricing because the 30-day window started on April 1st (even though the third order was less than 30 days after the second order). In this case, the third order starts a new 30-day window. The arrangement applies to pricing only and not to the delivery schedule requirements. Each order's delivery dates will be calculated on a stand-alone basis.

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from STC NGHH Maritime (20 meters salt water for 2 hours) Radio System w/ BFT (eCOBRA), SAASM GPS, UHF SATCOM, SINCGARS ESIP, HQ II, VU/LOS, ASCM, Commercial MANET, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, entitled "CLIN 0001 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost. to STC NGHH Maritime (20 meters salt water for 2 hours) Radio System w/ BFT (eCOBRA), SAASM GPS, UHF SATCOM, SINCGARS ESIP, HQ II, VU/LOS, ASCM, MANET, SRW, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, entitled "CLIN 0001 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost..

CLIN 0002

The CLIN extended description has changed from STC NGHH Urban (2 meters salt water for 2 hours) Radio System w/ BFT (eCOBRA), SAASM GPS, UHF SATCOM, VU/LOS, ASCM, Commercial MANET, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, tab entitled "CLIN 0002 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost. to STC NGHH Urban (2 meters salt water for 2 hours) Radio System w/ BFT (eCOBRA), SAASM GPS, UHF SATCOM, VU/LOS, ASCM, MANET, SRW, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, tab entitled "CLIN 0002 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost..

CLIN 0006

The CLIN description has changed from Exhibit D to Exhibit D - Removed From Requirement.

The CLIN extended description has changed from Preplanned Product Improvements (P3I) per Attachment 3, Exhibit D to CLIN is removed from the requirement as of Amendment 02.Preplanned Product Improvements (P3I) per Attachment 3, Exhibit D.

CLIN 0007

The CLIN extended description has changed from Spares Management IAW SOW Sections 6 and 7.

Annual FFPYear 1 Ordering Period 1 Pricing –2015 to 2016Year 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020 to Spares Management IAW SOW Sections 6 and 7. Annual FFPYear 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020.

CLIN 0008

The CLIN extended description has changed from Engineering Services as required per Delivery Order, IAW SOW Section 4.0.2 on a FFP Basis. As Identified Per Delivery Order SOW Year 1 Ordering Period 1 Pricing –2015 to 2016Year 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020 to Engineering Services as required per Delivery Order, IAW SOW Section 4.0.2 on a FFP Basis. As Identified Per Delivery Order SOW Year 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020.

CLIN 0009

IAW SOW Section 4.0.2 on a CPFF Basis. As Identified Per Delivery Order SOWYear 1 Ordering Period 1 Pricing –2015 to 2016Year 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020 to Engineering Services as required per Delivery Order, IAW SOW Section 4.0.2 on a CPFF Basis. As Identified Per Delivery Order SOWYear 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020.

CLIN 0010

The CLIN extended description has changed from Engineering Change Proposals as required per Delivery Order, IAW SOW Sections 4.0 and 5.0 on a FFP basis. As Identified Per Delivery Order SOWYear 1 Ordering Period 1 Pricing –2015 to 2016Year 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020 to Engineering Change Proposals as required per Delivery Order, IAW SOW Sections 4.0 and 5.0 on a FFP basis. As Identified Per Delivery Order SOWYear 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020.

CLIN 0011

Order, IAW SOW Sections 4.0 and 5.0 on a CPFF basis. As Identified Per Delivery Order SOWYear 1 Ordering Period 1 Pricing –2015 to 2016Year 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020 to Engineering Change Proposals as required per Delivery Order, IAW SOW Sections 4.0 and 5.0 on a CPFF basis.

As Identified Per Delivery Order SOWYear 2 Ordering Period 2 Pricing –2016 to 2017Year 3 Ordering Period 3 Pricing - 2017 to 2018Year 4 Ordering Period 4 Pricing –2018 to 2019Year 5 Ordering Period 5 Pricing –2019 to 2020.

CLIN 1001

The CLIN extended description has changed from STC NGHH Maritime (20 meters salt water for 2 hours) Radio System w/ BFT (eCOBRA), SAASM GPS, UHF SATCOM, SINCGARS ESIP, HQ II, VU/LOS, ASCM, Commercial MANET, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, entitled "CLIN 0001 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost. to STC NGHH Maritime (20 meters salt water for 2 hours) Radio System w/ BFT

(eCOBRA), SAASM GPS, UHF SATCOM, SINCGARS ESIP, HQ II, VU/LOS, ASCM, MANET, SRW, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, entitled "CLIN 0001 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost..

CLIN 1002

The CLIN extended description has changed from STC NGHH Urban (2 meters salt water for 2 hours) Radio System w/ BFT (eCOBRA), SAASM GPS, UHF SATCOM, VU/LOS, ASCM, Commercial MANET, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, tab entitled "CLIN 0002 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost. to STC NGHH Urban (2 meters salt water for 2 hours) Radio System w/ BFT (eCOBRA), SAASM GPS, UHF SATCOM, VU/LOS, ASCM, MANET, SRW, SBTW/SA, ISR Video Receive, per STC NGHH Performance Specification with five year warranty. Reference Attachment 3, tab entitled "CLIN 0002 System Items" for system description and RT capability listing, and Attachment 3 for stepladder pricing.NOTE: Any capability that is provided as a MM rather than integrated into the radio will be considered an ancillary device, priced separately and not be considered as part of the baseline radio cost..

CLIN 1006

The CLIN description has changed from Exhibit D to Exhibit D - Removed From Requirement.

The CLIN extended description has changed from Preplanned Product Improvements (P3I) per Attachment 3, Exhibit D to Preplanned Product Improvements (P3I) per Attachment 3, Exhibit D is removed from this requirement as of Amendment 02. Offerors should not propose to this CLIN..

CLIN 1007

The CLIN extended description has changed from Spares Management IAW SOW Sections 6 and 7.

Annual FFPOption Year Pricing- 2020 to 2021 to Spares Management IAW SOW Sections 6 and 7. Annual FFPOption Year Pricing- 2020 to 2021.

CLIN 1008

IAW SOW Section 4.0.2 on a FFP Basis. As Identified Per Delivery Order SOW Option Year Pricing - 2020 to 2021 to Engineering Services as required per Delivery Order, IAW SOW Section 4.0.2 on a FFP Basis. As Identified Per Delivery Order SOW Option Year Pricing - 2020 to 2021.

CLIN 1009

IAW SOW Section 4.0.2 on a CPFF Basis. As Identified Per Delivery Order SOWOption Year Pricing- 2020 to 2021 to Engineering Services as required per Delivery Order, IAW SOW Section 4.0.2 on a CPFF Basis. As Identified Per Delivery Order SOWOption Year Pricing- 2020 to 2021.

CLIN 1010

Order, IAW SOW Sections 4.0 and 5.0 on a FFP basis. As Identified Per Delivery Order SOWOption Year Pricing

- 2020 to 2021 to Engineering Change Proposals as required per Delivery Order, IAW SOW Sections 4.0 and 5.0 on a FFP basis. As Identified Per Delivery Order SOWOption Year Pricing - 2020 to 2021.

CLIN 1011

Order, IAW SOW Sections 4.0 and 5.0 on a CPFF basis. As Identified Per Delivery Order SOWOption Year Pricing- 2020 to 2021 to Engineering Change Proposals as required per Delivery Order, IAW SOW Sections 4.0 and 5.0 on a CPFF basis. As Identified Per Delivery Order SOWOption Year Pricing- 2020 to 2021.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

STATEMENT OF WORK

STATEMENT OF WORK

SOF TACTICAL COMMUNICATIONS

HANDHELD RADIO

1.0 Scope. United States Special Operations Command (USSOCOM) requires a next generation handheld (NGHH) radio system capable of simultaneous two channel operation with one channel supporting narrowband waveforms and the other supporting a wideband Mobile Ad Hoc Networking Waveform (MANET). In addition the NGHH shall be capable of receiving Intelligence, Surveillance and Reconnaissance (ISR) data in the form of full motion video (FMV) either as an embedded capability or via an attached mission module. The NGHH will be shall be capable of supporting any two of the aforementioned waveforms simultaneously. The NGHH shall be capable of crossbanding the received video over the MANET channel. The requirement is derived from the Special Operations Forces (SOF) Tactical Communications (STC) Capabilities Production Document (CPD). The STC next generation handheld radio shall also include an embedded Selective Availability Anti-Spoofing Module (SAASM) Global Positioning System (GPS) receiver and be capable of attaching to various Mission Modules (MM) in addition to the ISR MM such as, Signals Intelligence (SIGINT) for force protection, and Soldier Radio Waveform (SRW) 4G/LTE, Netted Iridium, other MANET waveforms and other Pre-Planned Product Improvements (P3I) as identified in the Governments STC NGHH Performance Specification. The STC NGHH will replace legacy single channel handheld radios such as the AN/PRC-148(V)1/2/5/6, AN/PRC-152, AN/PRC-152A and the two channel AN/PRC- 148B. The STC NGHH will include SOF unique capabilities including the enhanced Collection of Broadcasts from Remote Assets (eCOBRA) for Blue Force Tracking (BFT), the Demand Assigned Multiple Access (DAMA) Integrated Waveform (IW) for UHF Satellite Communications (SATCOM), select Advanced Special Communications Modes (ASCM) and two Electronic Counter-Counter Measures (ECCM) waveforms.

The purpose of this Statement of Work (SOW) is to clearly define the requirements for this IDIQ contract. Specific delivery orders will be issued as outlined within Section H of the basic contract, Delivery Order Procedures. This SOW defines the requirements needed to conduct a

Capital Equipment Replacement Program (CERP) to replace the legacy handheld radios with the STC NGHH. The effort shall include:

Program Management and Configuration Management and Control Systems Engineering to include possible software design/development, testing and production Integrated Logistics Support Requirements Operational and Depot Level Maintenance Technical Data and Reporting Training

1.1 Concept of Operations. The STC NGHH provides SOF teams with the ability to communicate on user selected frequencies from 30 to 2600 megahertz (MHz) utilizing a two channel handheld radio with embedded Communications Security (COMSEC). All variants of the NGHH shall include the necessary hardware and firmware to allow for P3Is identified in the STC NGHH Performance Specification and Contract, be they waveform implementations through a flash memory software upgrade or through the use of Mission Modules. Deliveries shall be in accordance with (IAW) Section B of the contract. The Contractor shall perform the software upgrades, qualification testing and shall obtain National Security Agency (NSA) Type 1 certification and Joint Interoperability Test Command (JITC) certifications at the Contractor’s expense.

1.1.1 Embedded COMSEC. The Contractor shall perform all work required to support full NSA certification supporting the classification requirements as defined in the NGHH performance specifications. However, the NSA TSVCIS and other applicable documents have precedence over the aforementioned requirements.

2.0 Applicable Documents. The following documents of the exact nature shown forms a part of this SOW to the extent specified herein. In the event of conflict between the contents of this SOW, the Government approved Product Design Specifications (PDS) shall be considered as the superseding requirement. The STC NGHH performance will be governed by the STC NGHH Performance Specification.

2.0.1 Contractor Product Design Specifications (PDS)

Next Generation Handheld Radio (NGHH) Product Design Specification (Contractor Specific)

Fixed Mount Components for the STC NGHH Platform Configuration (Contractor Specific)

2.0.2 Military Standards.

MIL-HDBK-61A Configuration Management Guidance

MIL-STD-882D System Safety Programs Requirements

MIL-PRF-49506 Logistics Management Requirements

MIL-STD-188-181C Interoperability Standard for Access to 5-AND 25-kHz UHF Satellite Communications Channels

MIL-STD-188-182B Interoperability Standard for UHF SATCOM DAMA Orderwire

Messages and Protocols

MIL-STD-188-183B Interoperability Standard for Multiple-Access 5- and 25-kHz UHF

Satellite Communications Channels, MIL-STD-188-184A Draft Interoperability and Performance Standard for the Data Control

Waveform

MIL-STD-188-241 SINCGARS Waveform Specification, November 2006 (SECRET)

MIL-STD-188-241-1/2 Appendix B, ASIP Mode 2 Waveform Description, August 2004

(SECRET)

MIL-STD-188-242 Interoperability and Performance Standards for Tactical Single Channel

VHF Radio Equipment

MIL-STD-188-243 Military Standard Interoperability and Performance Standards for

Tactical Single Channel UHF Radio Communications

MIL-STD-130N Identification Marking of U.S. Military Property

MIL-STD-129 Marking for Shipments and Storage

2.0.3 Commercial Standards

ANSI/NCSL Z540-1 Calibration Laboratories & Measuring and Test Equipment General

Requirements

ISO 10012-1 Quality Assurance Requirements for Measuring Equipment. Part 1:

Meteorological Confirmation System for Measuring Equipment

ANSI/TIA/EIA-603D Land Mobile FM or PM Communications Equipment Measurement and Performance Standards, June 2010

ANS/NCSL Z540-1 Support and Test Equipment

2.0.4 Other Documents

COBRA

(U) Collection of Broadcasts from Remote Assets (COBRA) Signal Architecture Standard (SAS), Ver. 2.05, 13 August 2009

[SECRET/NOFORN]

MIL-HDBK General Guidelines for Electronic Equipment

MSRC-5000SCA-V4.0 Software Communications Architecture Specification, Version 4.0 28

February 2012

MSRC-5000SEC-V1-1

Security Supplement to the Software Communications Architecture, 17 November 2001.

MSRC – 5000API -V1-

Applications Program Interface Supplement to the SCA, 17 November 2001.

ICD-GPS-154C GPS Interface Specification, 10 December 2002

ICD-GPS-222A

NAVSTAR GPS User Equipment Auxiliary Output Chip (Secret), Rev.

A, & D, 20 April 1990

ICD-GPS-225

NAVSTAR GPS Selective Availability and Anti-Spoofing Host Application Equipment Design Requirements (Secret), 1 August 1991

ITT-AC/D A3214186-

Rev C

System Engineering Document for the Ground Radio SINCGARS System Improvement Program (SIP and ASIP), May 13 2005

ITT-A/CD 35740/Z004-

SINCGARS SIP Product Specification for Generic Receiver- Transmitter, Radio RT-1523C/D(C)/U (Volume 2 of 2)

ITT A/CD 95-3886

SINCGARS SIP Frequency Hopping Waveform Specification

(SECRET)

ITT-A/OD No.

1260/ICD-5

SINCGARS System Engineering Document - Ground Radio System (Final), 28 July 1989

SRW System Performance Specification Version 1.8, 19 March 2008

ITT 8181466

BOWMAN MOD-ASIP VHF Waveform Fixed Frequency & Frequency Hopping, Rev C8, 9 October 2003

ITT 8224936

Soldier Radio Waveform Software Requirements Specification (SRS) Revision G, July 2009

ITT 8245546

Soldier Radio Waveform (SRW) 1.1.1, Waveform Design Specification (WDS), Revisión C, March 2012

MUOS-GD-62-

P54050T

Waveform Design Specification for the MUOS CAI Waveform

STANAG 4372 Second-Generation Anti-jam UHF Radio for NATO (SATURN)

USSOCOM STC NGHH Performance Specification, 18 July 2014

USSOCOM

(U) Improved Special Communications Mode (iSCM) Product Development Specification, Change 6, 3 November 2009 [SECRET]

USSOCOM

Advanced Special Communications Mode (ASCM) Performance Specification, System Level Specification (Attachment 1), 22 June

2012, [UNCLASS/FOUO]

55210-WFA-ASCM-

SRS-0001-1.0

Advanced Special Communications Mode (ASCM) Software Requirements Specification (SRS), May 17, 2012

USSOCOM Dir. 70-1 Research, Development, and Acquisition, Acquisition Management

System Policy, 19 March, 2010

USSOCOM Dir. 70-2 Special Operations-Peculiar Equipment, Item Unique Identification, 2 January 2008

USSOCOM Dir. 700-2 Logistics MFP-11 Funded Asset Visibility and Accountability, 29 July

USSOCOM Dir. 71-5 Operational and Test, 5 August 2010

3.0 Program Management Support

3.0.1 Program Management. The Contractor shall provide overall program management in support of the outlined program requirements within this SOW and all associated delivery orders. The dedicated contractor Program Manager will serve as the Contractor focal point working directly with the Government Program Office and will be responsible for ensuring that all cost, schedule and technical performance requirements are met, to include all reporting requirements, conference and meeting support, systems engineering requirements, and configuration management and control requirements as outlined within this SOW ensuring overall program success. Known specific reviews/conferences that require support are outlined below; however, the Contractor will be responsible and available to the Government for additional meetings/Video Teleconferences (VTC) as required throughout the anticipated period of performance in support of these requirements.

3.0.1.1 Program Management Reviews (PMR) and Other Meetings/Conferences. A Post Award Conference will be held at the Contractors facility within 14 days after contract award (ACA). A Preliminary Design Review (PDR) will be held within 120 days ACA and a Critical Design Review will be held within 90 days after the PDR (CDRL 0007). The Contractor shall also conduct formal program/status reviews (PMR) and provided monthly program status reports (CDRL 0016). Initially PMRs shall be conducted every two months or more frequently as deemed necessary by the Government. Specific dates, locations and agenda will be mutually coordinated between the Contractor and the Government. The program reviews shall address the status of all functional, technical, electrical design, management and previous action items.

The Contractor shall present technical progress since the previous PMR and discuss any technical issues with their proposed resolutions. Selected reviews shall take place at either Contractor or Government facilities as designated by the Government. The Contractor shall provide administrative support as required, to include preparation of hard copies of all materials which will be made available to each Government attendee prior to the start of each review.

The Contractor shall prepare and provide an agenda, in Contractor format, for Government approval prior to each review, and shall prepare review minutes (CDRL 0007). The Contractor shall also conduct PDR and CDR for each Preplanned Product Improvement (P3I) executed by the Government. These reviews shall be held at the Contractor’s or Government facilities as designated by the Government. These design reviews shall be limited to the performance design efforts and may be held concurrently with a previously scheduled PMR’s. PMR’s shall continue through to the completion of the contract.

3.0.1.2 Performance Data. The Contractor shall notify the Government of any and all performance related data that could either positively or negatively impact the reliability, maintainability, availability and/or supportability of the unique serialized radio. This notice will be posted in a separately highlighted and readily distinguishable field on the original equipment manufacturer (OEM) Program Status Website (Reference Section 12) (CDRL 0001). Any negative performance related data that has a significant impact to cost, schedule, or performance shall be communicated immediately to the Government in writing via email in addition to inclusion within the program information reported on the OEM Program Status Website. The Contractor shall also maintain the NGHH Performance Specification (CDRL 0017) up to date to reflect any and all changes to system performance for the handheld radio, mission modules and Fixed Mount System Components.

3.0.1.3 Logistics Conferences. The Contractor shall provide planning, documentation and personnel necessary to participate in periodic STC NGHH Logistics Conferences. The conferences shall address integrated logistics support issues. The conferences shall occur, as required, through the contract period of performance. The Contractor shall maintain an action item log to include action item description, status, and estimated resolution date and action point of contact on the program management website (CDRL 001). At the discretion of the Government, Logistics Conferences may be held in conjunction with PMRs (CDRL 0007).

3.0.2 Configuration Management and Control. SOF radios must be uniquely identified by serial number per MIL-STD-130N. The Contractor shall deliver spares and repair parts as ordered by the Government and in accordance with USSOCOM Directive 700-2 logistics total asset visibility and accountability processes and procedures.

3.0.2.1 Configuration Management. The Contractor shall conduct a Configuration Management (CM) Program IAW commercial best practices as defined in MIL HDBK 61A referenced above and as a part of the overall program management responsibilities. The purpose of the CM program is to maintain the functional integrity (form, fit and function) and supportability features of STC NGHH and major components throughout the systems anticipated life cycle.

3.0.2.2 Configuration Control. The Contractor shall maintain configuration control to cover hardware, firmware, software and documentation. The Contractor shall maintain accurate and up to date baseline documentation. Contractor generated changes providing the same form, fit and function after the baseline is established will not require written Government approval. Any changes modifying the form, fit and function or affect the operation, training or designated Government repair/replacement items in any way shall require written Government approval via an Engineering Change Proposal (ECP) process outlined within this SOW. (CDRL 0002)

3.0.2.3 Routine Software Updates. The Contractor shall coordinate all software updates with the Government for approval prior to release and integration into any SOF unique radios. The Government has established a single website for the release of all tactical communications software and firmware updates or upgrades for all SOF users to obtain software updates or upgrades that have been approved by the Government for use. The Contractor shall not release any software updates for SOF-unique radios to any commercial website including its own website without express Government written approval. Such approval shall be on a case by case basis only.

3.0.3 Schedule. The Contractor shall follow its proposed Integrated Master Plan (IMP) and Integrated Master Schedule (IMS) that clearly defines all the tasks necessary to satisfy the requirements in this SOW and to ensure availability of production articles 18 months ACA. The IMP and IMS shall be updated to reflect progress or performance against program milestones.

The Program Status Report (CRDL 0016) shall reflect the progress against the significant milestones that are required to design, test, qualify/certify, manufacture, deliver and support the NGHH. The Contractor shall notify the Government, in writing, of any issue that may result in a schedule shift of more than 10 business days. Notifications shall be initiated as soon as the Contractor becomes aware of the potential shift.

4.0 Engineering Change Proposal. The Contractor shall prepare an ECP for Class I changes only, under the general guidance of MIL-HDBK-61A, for any changes to the approved Product Baseline or the initiation of any of the P3I. Class I and/or Class II ECP definitions shall be interpreted as defined in MIL-HDBK-61A. Class I ECPs shall require, at a minimum, a Revision or Part Number change to the radio dependent upon system impact to form, fit, function or cost. The Government shall review all Class II ECPs for concurrence. If the Class II ECP merits a Part Number or Revision to the radio, the Government will non-concur and require the change to be submitted as a Class I ECP. Any requests for Deviations/Waiver DD Form1694 and Notice of Revision (NOR) (CDRL 0003) shall be submitted through the Contracting Officer for Government review and approval. Drawing updates for such Revisions and/or Part Number changes shall be completed at the Contractor’s expense to include all technical documentation required by the Government. The Contractor shall provide ECPs via electronic mail for Government review and approval. (CDRL 0002)

4.0.1 Class II Changes. For those changes not affecting form, fit, or function (i.e., parts substitution, changes not impacting contract/delivery schedule, or cost, etc.), the Government review of Class II changes during production will consist of an evaluation of the change to support concurrence in classification recommendations. The Contractor assumes total risk for implementation of changes prior to notification of Government concurrence.

4.0.2 ECP Systems Engineering. The Contractor shall perform necessary systems engineering, including analysis and design, to determine the detailed work required to execute a proposed change to the STC NGHH program. Technical activities shall incorporate reduction of total cost ownership or improve the readiness of the system to the maximum extent possible.

STC NGHH requirements baseline are in the referenced specifications and the Contractor's ECP technical proposal.

4.0.3 Functional Configuration Audit (FCA). For Class I ECPs, the Government and the contractor shall conduct a FCA jointly, at a time and place mutually agreed to, with the Government chairing the audit. The Contractor shall be responsible for providing the system to be audited, facilities, personnel, documentation, and other support as may be required. The Contractor shall provide a CMP, an approach and proposed schedule for conducting the FCA and identification of the Configuration Items (CIs) to be audited and/or units to be audited. The Government will provide the contractor notification of agreement with the functional baseline within 10 days following the FCA. If required, the Contractor shall revise the technical and logistics documentation (CDRL 0004).

4.1 Nomenclature Assignments. System and unit level nomenclature assignments for the material procured under this contract will be obtained and managed by the Government Program Management Office IAW MIL STD 196E, Joint Electronics Type Designation System (JETDAS). The contractor shall participate in obtaining nomenclature and identification of electronic material. Contractor submission of draft DD Form 61 or supporting data shall be to the Program manager’s office, not directly to a Departmental Control Point (DCP). All submittals to the DCP shall be made by the Government Program Office.

5.0 System Test Plans, Procedures and Reports-Contractor Developmental Tests (CDT)

5.0.1 Test and Evaluation. The test strategy for STC NGHH radio employs a series of Contractor Developmental and Government Operational tests that will demonstrate compliance with contract requirements. Radios used for design and testing purposes shall be production-representative units. The Contractor shall conduct comprehensive testing in accordance with applicable delivery order SOWs and referenced specifications. In conjunction with their test program, the contractor shall establish and implement a failure reporting system in contractor format as part of their internal management system. This system shall track both hardware failure reporting and software failure reporting in the form of software test reports and system test reports in compliance with the contractor’s best management practices. All data/reports (either formal or informal) shall be in English, be accessible and made available for Government review. In addition, the contractor shall convene Failure Review Board (FRB) meetings as required for the review and disposition of each test failure and the corrective action plan to ensure their successful implementation.

5.0.2 System Test Plans. The Contractor shall prepare Test Plans to cover each CDT event, including all ECP initiatives P3I efforts, and Production Qualification Test (PQT) (CDRL 0008).

Each plan shall contain a master cross verification matrix to take into account all radio set system testing, waveform testing, software testing requirements with test events and verification methodology. Government review of Test Plans is required and comments provided will be addressed by the contractor.

5.0.3 System Test Procedures. The Contractor shall prepare Test Procedures (CDRL 0009).

Test Procedures shall be developed for each CDT and PQT test event and shall address verification of each requirement of the radio set undergoing testing during the test event. Government review of Test Procedures is a prerequisite prior to the start of each test event. The Government may request additional Test Procedures.

5.0.4 System Test Reports. The Contractor shall prepare CDT and PQT Test Reports documenting the results of each test (CDRL 0010).

5.1 Contractor Development Testing (CDT). The contractor shall conduct internal design verification and validation for all engineering changes. All developmental testing will be coordinated with government to include government witness for technical validation to preclude subsequent, duplicative developmental testing. All CDT shall include functional, mechanical, electrical, software, environmental, EMI, and regression testing as appropriate to the magnitude of the change. The Contractor shall conduct testing in accordance with the requirements of the applicable delivery order SOW and the Government reviewed Test Plans (CDRL 0008) and Test Procedures (CDRL 0009). Contractor tests shall be conducted prior to hand-off to the Government for its Limited User Test (LUT). The Contractor shall document the results of the CDT in Test Reports (CDRL 0010).

5.2 Operational and Limited User Tests. The contractor shall provide technical support in the form of a field service representative for Government operational testing, limited user testing, and testing that supports validation of ECP P3I integrated capabilities.

5.3 Safety and Safety Assessment Report (SAR). The contractor shall be responsible for all safety aspects of engineering changes and shall evaluate all real and potential hazards associated with personnel operation, test and maintenance procedures, and component attributes. The contractor shall perform a Safety Assessment and submit a Safety Assessment Report using MIL STD-882D as a guide and in accordance with (CDRL 0018). The SAR shall:

Document the safety risk being assumed prior to test or operation of the NGHH and

FMS.

Identify all safety features of the system hardware and software design, specific controls or precautions to be followed in the use of the system Provide verification of compliance to safety requirements identified in the system specification Identify toxic and environmentally unacceptable materials used in the system, any possible alternative materials, and recommended actions to eliminate or reduce the use of hazardous materials

Address any exposure concerns to personnel during operational or maintenance proce-dures to include fabrication, transportation, setup and tear down, or resulting from damage to the equipment

The contractor shall attach to the SAR a completed System Safety Design Verification Checklist and Material Safety Data Sheets for all hazardous materials and identify any material used in the system design that requires disposal as a hazardous waste.

6.0 Integrated Logistics Support (ILS) and Maintenance Requirements. In this section of the SOW the Government explains its requirements for maintenance of STC NGHH.

6.0.1 Maintenance Planning. The Government's requirement is to maintain the two levels of maintenance (Organizational and Depot) for the STC NGHH systems as defined below. The maintenance concept shall maximize the use of Built in Test (BIT) to fault isolate to the Lowest Replaceable Units (LRU).

6.0.2 Organizational Level Maintenance. Organizational Level maintenance shall include replacement of the transceivers, mission modules, other major equipment items (e.g., external amplifiers, power supplies, etc.), batteries, antennas, and other ancillaries. Additionally, exterior items such as broken knobs, dust caps, etc. shall be replaced in the field as well. Unit-level preventive maintenance (to include Operator) shall be limited to built-in test (BIT), cleaning of exterior surfaces and operational testing. The Contractor shall minimize the requirements for training, tools, and test equipment at the organizational level of maintenance. Inoperable radios are forwarded as directed by the Item Manager (IM).

6.0.3 Depot Level Maintenance Contractor Depot Logistics Support (CDLS). Depot level maintenance will be performed by the Contractor. The Contractor shall provide Life Cycle Support for all USSOCOM procured and fielded Primary Mission Equipment (PME) throughout the contract period of performance to include repair and spare parts as required within a CDLS delivery order. PME is defined as radios, transceivers, vehicle adaptors, vehicle adaptor amplifiers, base stations, repeaters, and any other associated major items procured under this and previous contracts. The Contractor shall furnish all facilities, qualified labor, materials, plant equipment, tools and test equipment to repair PME. All parts and material used during the repair process shall meet or exceed the specifications and technical data requirements as referenced in paragraph 2.0.1 above. The Contractor shall warehouse all PME and repair/spare parts up to 24 months in such a manner as to preclude any damage or loss. The Contractor shall receive defective PME from the user as directed by the Program Office designated IM for repair or replacement. Upon notification of a repair event from the IM the Contractor will ship a replacement system from the spares pool as directed by the IM. Upon repair of the returned item the Contractor shall return the repaired item to the spares pool.

6.1 Reliability/Maintainability

6.1.1 Failure Reporting, Analysis and Corrective Action System (FRACAS). The Contractor shall generate, maintain, and provide upon request a Failed Item Analysis Report in accordance with DI-SESS-81315 for each Acceptance Test, Contractor Development Test, and Out-of-Box failed item (e.g., Quality Deficiency Reports (QDRs), DR, etc.) (CDRL 0005). The Contractor shall have an established closed loop failure reporting system, procedures for analysis of failures to determine cause, and documentation for recording procedures for analysis of failures to determine cause, and documentation for recording corrective action taken.

The Contractor shall have a mechanism in place to collect and report field product performance, problems, failures, and shall implement an effective cause and corrective action system. The Contractor’s existing data collection, analysis, reporting and corrective action system shall be used for field failure reporting. Failure data shall be isolated to the LRU. The field failure reporting and corrective action system shall identify failures, prioritize failure trends, analyze failure modes and causes, and track solution effectiveness. The Contractor shall provide a Failure Summary Analysis Report (CDRL 0006) for each radio repaired or replaced under warranty or non-warranty repair.

6.1.2 Performance. The Contractor shall notify the Government of any and all performance related data that would both positively and negatively impact the reliability, maintainability, availability and/or supportability of the radio (CDRL 0006).

6.1.3 Economic Repair Analysis. The repair cost for a STC NGHH major component (e.g., radio, mission module, power amplifier, power supply, etc.) shall not exceed 65% of the cost for a new component, as listed in section B of the contract, without Government approval. Prior to initiating any repairs to other non-warranted items (not including the R/T), the Contractor shall determine the cost of repairs. If the repair cost is estimated to exceed 65% of the replacement cost of the PME, the Contractor shall notify the Government and obtain direction for repair or replacement of the defective item within 10 working days.

6.1.4 Non-Warranty Failure Analysis and Repair. The Contractor shall receive, inspect, test, and perform failure analysis and/or isolate each STC NGHH major component failure to determine the specific work required to restore it to a serviceable condition. The Contractor shall repair any major component that is not determined to be Beyond Economical Repair (BER) to the latest production or approved configuration. If a failed component is determined BER, the Government may choose to replace the component. The contractor shall not perform any non-warranty repair on failed components until Government authorization IAW paragraph 6.0.3 of the SOW.

7.0 Supply Support. The Contractor shall provide inventory management, e.g., receipt, storage and issue etc., of spare and repair parts and availability of spare and repair parts so as not to interfere with the STC NGHH production. Distribution of any and all spare and repair parts will be directed by the USSOCOM STC program office.

7.0.1 Parts Listings. The Contractor shall provide the following parts listings by part number

Recommended Spares List, as required Repair Parts Lists, if applicable

7.0.2 Government Furnished Property. The Government will provide approved Government Furnished Property (GFP) to the Contractor within 90 days ACA.

8.0 Manuals. The Contractor shall provide manuals, in English, that the Government will reproduce as required.

8.0.1 Operator’s and Maintenance Manuals with Supplemental Data. The Contractor shall provide to the Government the operator’s and organizational maintenance manuals for each piece of equipment (CDRL 0011) that covers operations and organizational maintenance of all equipment under this contract. The intended users of the Manuals are military personnel of various skills and skill levels as operators and electronics technicians as maintainers.

Submission of the manuals will be in CD-ROM format. If the Manuals are deemed inadequate, the Contractor shall develop supplemental data as specified by the Government. The Manuals shall be updated, as required, to reflect the performance and operational characteristics of the latest configuration.

8.0.2 Quick Reference Guide. The Contractor shall provide a detachable, laminated Quick Reference Guide (CDRL 0012) that fits inside the radio holster. The Quick Reference Guide shall provide at a minimum:

Operating / Programming procedures addressing all waveforms.

Replacement procedures for handsets, batteries, mission modules and antennas.

BIT troubleshooting procedures.

The Contractor shall provide one complete Operator’s Manual and Quick Reference Guide over packed with each STC NGHH system in CD format.

9.0 Training.

9.0.1 Training Material. The Contractor shall provide training materials, in English, to support training requirements (CDRL 0013). The Training Materials shall cover the PME and radios as identified in this SOW. Commercial training materials may be used. The Contractor shall develop a Computer Based Training Program (CBT) (CDRL 0014) that is based upon the training courses referenced in paragraphs 9.0.2 and 9.0.3 below. The CBT will cover all aspects of training and will be subdivided into two specific training modules/sections whereby the user can select a particular area of focus.