08-20003_FRAME ASSEMBLY_package.pdf
PDF 5 MB Posted
- Attached to
- Mobile Launch Vehicle (MLV) Fabrication
- Solicitation number
- Not on record
About this file
This document is a comprehensive technical drawing and assembly specification for the Frame Assembly of the NASA Balloon Program's NBOC MLV (Multibody Landing Vehicle). The drawing, numbered 08-20003 with revision dated 03/2024, provides detailed assembly instructions for both operational and transport configurations of the vehicle frame structure.
The frame assembly incorporates multiple subsystems including hydraulic jacks, landing gear assemblies, walkway support structures, stair landing components, and stair railing systems. The drawing specifies over 200 component parts sourced primarily from McMaster-Carr, Parker Hannifin, Enerpac, Bosch Rexroth, and other industrial suppliers. Key hydraulic components include 15-ton and 5-ton hydraulic rams, coupling assemblies, and an NBOC MLV valve/control body. The assembly requires welded construction using AWS D1.1/D1.1M:2020 standards with ER70S-6, ER70S-3, or E7018-1 filler metals, followed by comprehensive surface preparation and coating per NASA-STD-5008B specifications (Carboline Carbozinc 11 WB primer with Carboacrylic topcoat in yellow, FED-STD-595 color No. 13538). Assembly notes specify MIL-PRF-907H graphite/aluminum anti-seize compound application, torque specifications per manufacturer catalogs (Parker, Clamp Company technical specifications), and Loctite 242 application to specified fasteners. The document includes detailed machined dimensions for component subassemblies, hose fabrication requirements tables, and rigorous quality control specifications for leak testing and inspection protocols.
View the file
Other files
Show all 25
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FWD
PREPARED FOR
OPERATION
FWD
PREPARED FOR
TRANSPORT
NOTES (UNLESS OTHERWISE SPECIFIED):
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE1.
SPECIFIED.
APPLY MIL-PRF-907H TYPE II GRAPHITE/ALUMINUM2.
ANTI-SEIZE COMPOUND LIBERALLY TO THREAD AND
SHANK OF ALL FASTENERS AND TORQUE ALL
FASTENERS PER TORQUE TABLE UNLESS LOCTITE IS
NEEDED OR OTHERWISE SPECIFIED.
TORQUE ALL CLAMP COMPANY CLAMPS IAW FKB-3.
RSB CLAMPS TECHNICAL SPECIFICATIONS PAGE 9.
TORQUE ALL ELECTRICAL FITTINGS HAND TIGHT4.
UNLESS OTHERWISE SPECIFIED.
TORQUE ALL HYDRAULIC FITTINGS IAW PARKER'S 43005.
CATALOG AS FOLLOWS UNLESS OTHERWISE
SPECIFIED:
SAE ADJUSTABLE/NON-ADJUSTABLE PORT END1.
ASSEMBLY:
PAGE 459/R4
TRIPLOK/FERULOK:2.
PAGE 460/R5
TORQUE ALL UNSPECIFIED FASTENERS AS DIRECTED6.
BY ENGINEERING.
APPLY TORQUE STRIPE TO ALL FASTENERS UNLESS7.
OTHERWISE SPECIFIED.
APPLY A MINIMUM OF 4 WRAPS OF WHITE TEFLON8.
TAPE TO ALL TAPERED PIPE THREADS AND INSTALL TO
BEST INDUSTRY PRACTICE.
APPLY LOCTITE 242 TO SPECIFIED FASTENERS AND9.
INSTALL HAND TIGHT.
CHASE ALL THREADED HOLES PRIOR TO ASSEMBLY.10.
INSTALL ALL HARDLINE TUBING TO FIT COMPONENTS11.
AND CLAMPS AS SHOWN AND IN ACCORDANCE
WITH INDUSTRY BEST PRACTICES FOR BEND RADIUS.
CUT TO LENGTH AS REQUIRED.
ALL ELECTRICAL CONNECTIONS AND CALLOUTS12.
SHALL BE IAW 08-20018-SCH-01 AND 08-20018-SCH-
NOTES 13-17 CONTINUED ON SH 6
BOM CONTINUED ON SH.2
A
ITEM
NO. QTY PART NO. DESCRIPTION SOURCE SOURCE PART NO.
1 1 08-20003-100 MACHINED DIMENSIONS FOR FRAME RAILS, FRAME, NBOC MLV
2 2 08-20003-11 PILLOW BLOCK, FRAME, NBOC MLV
3 8 08-20003-600 MACHINED DIMENSIONS FOR WALKWAY SUPPORT, FRAME, NBOC MLV
4 2 08-20003-400 MACHINED DIMENSIONS FOR STAIR LANDING, FRAME, NBOC MLV
5 1 08-20005-052 GENERATOR PALLET ASSEMBLY, GEN SET PALLET ASSEMBLY, NBOC MLV
6 1 08-20003-01 L-ANGLE, FRAME ASSEMBLY, NBOC MLV
7 2 08-20003-04 STAIR BRACKET, FRAME ASSEMBLY, NBOC MLV
8 4 08-20003-05 AXLE HINGE, FRAME ASSEMBLY, NBOC MLV
9 4 08-20012-100 MACHINED DIMENSIONS FOR AXLE HINGE PIN, AXLE, NBOC MLV
10 1 08-20003-02 L-ANGLE, CUT, FRAME ASSEMBLY, NBOC MLV
11 2 08-20003-06 FRAME ROLLER, FRAME, NBOC MLV
12 24 08-20003-07 BEARING SPACER, FRAME ASSEMBLY, NBOC MLV
13 1 08-20003-09-02 STARBOARD SIDE SKIRT, SCISSOR LIFT, FRAME, NBOC MLV
14 1 08-20003-09-01 PORT SIDE SKIRT, SCISSOR LIFT, FRAME, NBOC MLV
15 1 08-20003-12 AFT SCISSOR LIFT COVER, FRAME, NBOC MLV
16 2 08-20003-13 STAIR LANDING SUPPORT, FRAME, NBOC MLV
17 1 08-20003-14 PLATE, HYDRAULIC CONTROLLER MOUNT, FRAME ASSEMBLY, NBOC MLV
18 1 08-20003-03 LONG L-ANGLE, FRAME ASSEMBLY, NBOC MLV
19 2 08-20003-20 HYDRAULIC DIVERTER BLOCK, FRAME ASSEMBLY, NBOC MLV
20 2 08-20003-15 FRAME ROLLER PIN, FRAME, NBOC MLV
21 1 08-20003-16 MANIFOLD SHROUD, FRAME ASSEMBLY, NBOC MLV
22 1 08-20012-50-02 AXLE ASSEMBLY STARBOARD SIDE
23 1 08-20012-50-01 AXLE ASSEMBLY PORT SIDE
24 4 08-20017 CHASSIS JACK ASSEMBLY, NBOC MLV
25 1 08-20004-200 MODIFIED SCISSOR LIFT, LAUNCH DECK, NBOC MLV
26 1 08-20005-053-
02 PASSENGER GEN SET PALLET ASSEMBLY, FUEL TANK MOUNT
27 1 08-20005-053-
01 DRIVER GEN SET PALLET ASSEMBLY, FUEL TANK MOUNT
28 7 PLANK GRATING, 24X2X96, GALVANIZED MCMASTER-CARR 6855T668
29 6 PLANK GRATING, 11.75X2X36, GALVANIZED MCMASTER-CARR 6855T414
30 2 08-20003-500 MACHINED DIMENSIONS FOR STAIR RAILING, FRAME, NBOC MLV
31 4 SINGLE MOUNT, STRONGHOLD SAFETY
STRONGHOLD
SAFETY
ENGINEERING
411905
32 4 DOUBLE FACE MOUNT, STRONGHOLD SAFETY
STRONGHOLD
SAFETY
ENGINEERING
411907
33 6 PLANK GRATING, 9.75X30 MCNICHOLS 640431T503
34 2 PLANK GRATING, 30 X 4.75 GRAINGER 30PD49
35 1 THREAD COLLAR, 5 TON ENERPAC AW53
36 24 HEX HEAD SCREW, M30X3.5 X 80MM, CLASS 10.9 STEEL MCMASTER-CARR 97478A191
37 32 HEX HEAD SCREW, M14X2 X 40MM, ZINC PLATED STEEL, CLASS 8.8 MCMASTER-CARR 91280A782
38 12 M10 X 1.5 MM, 35 MM, HHCS, CLASS 12.9, Zinc Yellow-Chromate Plated Steel Hex Head Screw MCMASTER-CARR 91029A113
39 4 M10 X 1.5 MM, 40 MM, HHCS, CLASS 10.9, ZINC YELLOW CHROMATE PLATED MCMASTER-CARR 95327A622
40 20 HEX HEAD SCREW, M10X1.5 X 60MM, CLASS 12.9, ZINC PLATE YELLOW CHROMATE MCMASTER-CARR 91029A116
41 52 HEX HEAD SCREW, M10X1.5 X 40MM, CLASS 12.9, ZINC YELLOW CHROMATE
PLATED STEEL MCMASTER-CARR 91029A114
42 16 M10X1.5MM, 30MM, HHCS, CLASS 12.9, ZINC YELLOW CHROMATE PLATED MCMASTER-CARR 91029A112
43 20 M10X1.5MM,45MM,HHCS, CLASS 8.8, ZINC PLATED MCMASTER-CARR 91280A640
44 32 M30X3.5MM, 80MM, HHCS, CLASS 10.9, ZINC YELLOW CHROMATE PLATED MCMASTER-CARR 90854A375
45 8 M20X2.5MM, 50MM, HHCS, CLASS 10.9, ZINC YELLOW CHROMATE PLATED MCMASTER-CARR 90854A309
46 80 WASHER, M30 ZINC YELLOW-CHROMATE PLATED, CLASS 12.9 MCMASTER-CARR 90483A109
47 32 LOCKNUT, M14, STEEL, NYLON INSERT, CLASS 8.8 MCMASTER-CARR 90576A120
48 137 M10X1.5MM, LOCKNUT, ZINC PLATED, CLASS 10 MCMASTER-CARR 94645A220
49 64 STEEL WASHER, M14, ZINC PLATED MCMASTER-CARR 98688A120
50 278 M10 ZINC PLATED CLASS 10.9 STANDARD WASHER MCMASTER-CARR 91455A613
51 12 STEEL WASHER, M20, ZINC PLATED, CLASS 10.9 MCMASTER-CARR 91455A617
52 8 M6 WASHER, CLASS 8.8 STEEL, ZINC PLATED MCMASTER CARR 91455A120
53 24 HEX NUT, M30X3.5, ZINC PLATED MCMASTER-CARR 90870A112
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:36
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 1 OF 12
08-20003
A A
B B
C C
D D
E E
F F
B
UNCLASSIFIED
DATE REV. DESCRIPTION ENG/DFT
10/17/2024 - ORIGINAL RELEASE LTB
3/31/2025 A PER CR 2835: UPDATED NOTE 12 TO CORRECT SCHEMATIC
PN TO 08-20018-SCH-02 KWS
4/22/2025 B
PER CR 2844: UPDATED TO NON GFCI OUTLETS TO MATCH
STANDARD OUTLETS CALLED OUT IN ELECTRICAL
SCHEMATIC. UPDATED FUEL HOSES TO USE BARBED
FITTINGS
KWS
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
B
B
ITEM
NO. QTY PART NO. DESCRIPTION SOURCE SOURCE PART NO.
160 1 08-20003-33 DIVERTER HOSE 1, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV
161 1 08-20003-34 DIVERTER HOSE 2, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV
162 1 08-20003-35 SUPPLY HOSE, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV
163 1 08-20003-36 HOSE, PARKING BRAKE SHUT OFF, FRAME ASSEMBLY, NBOC MLV
164 2 08-20003-37 DIVERTER HOSE, PARKING BRAKE SHUTOFF, FRAME ASSEMBLY, NBOC MLV
165 1 08-20003-39 HOOKUP HOSE, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV
166 1 08-20003-40 HOSE 1, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
167 1 08-20003-41 HOSE 2, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
168 1 08-20003-42 HOSE 3, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
169 1 08-20003-43 HOSE 4, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
170 1 08-20003-44 HOSE 5, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
171 1 08-20003-45 HOSE 6, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
172 1 08-20003-46 HOSE 7, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
173 1 08-20003-47 HOSE 8, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
174 1 08-20003-48 HOSE 9, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
175 1 08-20003-49 HOSE 10, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
176 1 08-20003-50 HOSE 11, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
177 1 08-20003-51 HOSE 12, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
178 1 08-20003-52 HOSE 13, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
179 1 08-20003-53 HOSE 14, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
180 1 08-20003-54 HOSE 15, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
181 1 08-20003-55 HOSE 16, MANIFOLD, FRAME ASSEMBLY, NBOC MLV
182 2 08-20003-56* FUEL HOSE, FEMALE QUICK CONNECT, FRAME ASSEMBLY, NBOC MLV
183 1 08-20003-57* LONG FUEL HOSE, MALE QUICK CONNECT, FRAME ASSEMBLY, NBOC MLV
184 1 08-20003-58* SHORT FUEL HOSE, MALE QUICK CONNECT, FRAME ASSEMBLY, NBOC MLV
185 1 08-20003-60* FUEL HOSE 1, GEN SET, FRAME ASSEMBLY, NBOC MLV
186 1 08-20003-61* FUEL HOSE 2, GEN SET, FRAME ASSEMBLY, NBOC MLV
187 11 0.50" DIA X .049" WALL, 20 FT LONG, A269 SEAMLESS 316 STAINLESS STEEL TUBING
188 5 1.00" DIA X .083" WALL, 20 FT LONG, A269 SEAMLESS 316 STAINLESS STEEL TUBING
189 10 0.375" DIA X .035" WALL, 20 FT LONG, A269 SEAMLESS 316 STAINLESS STEEL TUBING
190 4 STRAIGHT FERULOK 24° - NPTF FITTING, -06 SIZE, 1/4 NPTF PARKER 6 GBU-S
191 2 T UNION FERULOK 24° , -06 SIZE PARKER 6 JBU-S
192 2 FERULOK 24° FLARELESS, #6 TUBE, 90 DEG FITTING, #6 NPTF PARKER 6-6 DBU-S
193 11 FASTENERS, STEEL GRATING MCMASTER-CARR 7012T5
194 12 120MM OD, 55MM ID, 43MM WIDE, DEEP GROOVE BALL BEARING, SEALED AND
LUBRICATED SKF 62311-2RS1
195 1 SAFETY RAILING, 7.5'
STRONGHOLD
SAFETY
ENGINEERING
411893
196 1 SAFETY RAILING, 7'
STRONGHOLD
SAFETY
ENGINEERING
411892
197 1 SAFETY RAILING, 6'
STRONGHOLD
SAFETY
ENGINEERING
411894
198 2 INTERNAL RETAINING RING FOR 120 MM ID MCMASTER-CARR 98455A167
199 2 20A ROCKER LIGHT SWITCH MCMASTER-CARR 7030K72
200 1 2 GANG SWITCH ENCLOSURE COVER MCMASTER-CARR 70025K68
201 2 1/4-20 X 1.25", SHCS, *ALLOY STEEL, BLACK OXIDE UNBRAKO 105272
202 1 -8 37° TRIPLE LOK MALE TO -8 FERULOK, STRAIGHT ADAPTER, HIGH PRESSURE
FITTING PARKER HANNIFIN 8 XHBU-S
203 1 0.5 NPT MALE TO -8 FERULOK, STRAIGHT ADAPTER, HIGH PRESSURE FITTING PARKER HANNIFIN 8-8 FBU-S
204 5 5-15 CORROSION RESISTANT RECEPTACLE, 125V, 15A, YELLOW MCMASTER-CARR 70145K51
205 3 1 GANG VERTICAL OUTDOOR COVER FOR STANDARD RECEPTACLE MCMASTER-CARR 7954K32
206 1 2 GANG VERTICAL OUTDOOR COVER FOR STANDARD RECEPTACLE MCMASTER-CARR 7954K42
ITEM
NO. QTY PART NO. DESCRIPTION SOURCE SOURCE PART NO.
107 1 QUICK DISCONNECT PLUG COUPLING, 1.25 NPT MCMASTER- CARR 53645K54
108 1 4.9 TON CAPACITY, 3.11" STROKE, GENERAL PURPOSE HYDRAULIC CYLINDER ENERPAC RC53
109 2 2 IN STANDARD DECK FILL, DIESEL FUEL NECK BOAT OUTFITTERS 260-2468
110 1 NBOC MLV VALVE/ CONTROL BODY FOR HYDRAULIC SYSTEM BOSCH REXROTH
M4-Gyyyyy-
2X/9M4-
15J_W2_MV198
111 1 HYDRAULIC RAM 15 TON, 8.00" STROKE ENERPAC RC158
112 1 HYDRAULIC RAM, SINGLE ACTING, 5 TON ENERPAC RC57
113 1 08-20003-19 ENERPAC COUPLING, FRAME ASSEMBLY, NBOC MLV
114 1 0.750-16 HEX NUT, THIN, GR5, ZINC PLATED.SLDPRT MCMASTER-CARR 94846A540
115 1 1.000-8 HEX NUT, THIN, GR5, ZINC PLATED MCMASTER-CARR 94846A550
116 1 08-20003-17 1 1/2-16 THREADED ENERPAC HOUSING BLOCK, FRAME ASSEMBLY, NBOC MLV
117 1 08-20003-18 2 3/4-16 THREADED ENERPAC HOUSING BLOCK, FRAME ASSEMBLY, NBOC MLV
118 30 1/2" I.D. TUBING CLAMP, HEAVY SERIES ZINC-PLATED HARDWARE (EXCLUDE
MOUNT)
THE CLAMP
COMPANY RCPR1-112,7/CRVIF
119 4 1.25" PIPE CLAMP (1.65" I.D.), HEAVY SERIES ZINC-PLATED HARDWARE (EXCLUDE
MOUNT)
THE CLAMP
COMPANY RCPR1-342/CRVIF
120 8 .75" PIPE CLAMP (1.05" I.D.), HEAVY SERIES ZINC-PLATED HARDWARE (EXCLUDE
MOUNT)
THE CLAMP
COMPANY RCPR1-226,9/CRVIF
121 2 1" PIPE CLAMP (1.32" I.D.), HEAVY SERIES ZINC-PLATED HAARDWARE (EXCLUDE
MOUNT)
THE CLAMP
COMPANY RCPR1-333,7/CRVIF
122 1 13/16 DIAM FLUOROSILICONE RUBBER CUSHION, 304 SS P-CLAMP (MS21919) MCMCASTER-CARR 4711N277
123 60 3/8" I.D. TUBING CLAMP, HEAVY SERIES ZINC-PLATED HARDWARE (EXCLUDE
MOUNT)
THE CLAMP
COMPANY
RCPR1-
109,5/CRVIF/UNC
124 14 1" I.D. TUBING CLAMP, HEAVY SERIES ZINC-PLATED HARDWARE (EXCLUDE MOUNT) THE CLAMP
COMPANY RCPR1-225,4/CRVIF
125 1 LIQUID-TIGHT FLEXIBLE METAL CONDUIT EXTREME-TEMPERATURE, 1 TRADE SIZE, 5FT MCMASTER-CARR 8235K54
126 2 0.75" DIAM PIPE, SCH 40, B429-20 EXTRUDED 6061-T6 ALUMINUM (ELECTRICAL
CONDUIT)
127 1 1.00" DIAM PIPE, SCH 40, B429-20 EXTRUDED 6061-T6 ALUMINUM (ELECTRICAL
CONDUIT)
128 2 1.25" DIAM PIPE, SCH 40, B429-20 EXTRUDED 6061-T6 ALUMINUM (ELECTRICAL
CONDUIT)
129 3 OUTLET BOX, CONDUIT CONNECTION, .75 NPT MCMASTER-CARR 7169K35
130 1 OUTLET BOX, 3 CONNECTIONS, .75 NPT MCMASTER-CARR 7219K26
131 9 ELBOW, 90DEG, STEEL CONDUIT, .75 NPSM MCMASTER-CARR 7513K52
132 2 ALUMINUM PIPE, .75 NPT, 12 IN LONG MCMASTER-CARR 44665K545
133 2 COUPLER, ALUMINUM PIPE, 1" NPT MALE MCMASTER-CARR 44665K221
134 3 PIPE FITTING, ALUMINUM, 1.25 X 1 NPT MCMASTER-CARR 44705K275
135 2 ACCESS PORT FOR METAL CONDUIT, TEE, 1.25 NPT MCMASTER-CARR 7153K84
136 10 1-1/4 TRADE SIZE FEMALE X NPSM MALE STRAIGHT FOR MEDIUM- AND THICK-WALL
STEEL CONDUIT MCMASTER-CARR 7513K14
137 2 ACCESS PORT FOR METAL CONDUIT, TEE, .75 NPT MCMASTER-CARR 9128K82
138 2 ELBOW CONNECTOR, 90 DEG, STEEL CONDUIT, 1.25 FEMAL NPT MCMASTER-CARR 7513K54
139 2 ALUMINUM PIPE, .75 NPT, 3 IN LONG MCMASTER-CARR 44665K195
140 18 ADAPTER, .75 FEMALE X .75 NPSM MALE MCMASTER-CARR 7513K12
141 1 OUTLET BOX, 1 IN, 3 HOLE, 2 GANG SIGMA 14357
142 1 COUPLER, MALE, 1.25 NPT MCMASTER-CARR 44665K241
143 1 ELECTRICAL ENCLOSURE, WALL MOUNT, 48HX36WX12D NVENT HOFFMAN A48H36DL3P3T
144 6 ADAPTER, 1" FEMALE X 1" NPSM MCMASTER-CARR 7513K13
145 1 ADAPTER, 2" FEMALE X 2" NPSM MALE MCMASTER-CARR 7513K16
146 1 2" NPSM PIPE SIZE, 90° ACCESS PORT FOR METAL CONDUIT, ALUMINUM MCMASTER-CARR 7154K76
147 2 3/4 NPT MALE-MALE STRAIGHT FOR MEDIUM AND THICK WALL CONDUIT MCMASTER-CARR 7513K58
149 2 1.00 NPT FEMALE 90° ELBOW, ZINC PLATED STEEL MCMCASTER-CARR 7513K53
149 1 1 NPT MALE-MALE STRAIGHT FOR MEDIUM AND THICK WALL CONDUIT MCMCASTER-CARR 7513K68
150 2 OUTLET BOX, 1 IN, 5 HOLE, 2 GANG SIGMA 32105G1
151 2 LIQUID-TIGHT FLEXIBLE METAL CONDUIT ADAPTER WITH LOCKNUT, ZINC 90
DEGREE, 1 TRADE SIZE FEMALE X 1 NPSM MALE MCMASTER-CARR 7119K84
152 2 2 GANG INDUSTRY DESIGNATION BLANK COVER FOR WEATHERPROOF OUTLET
BOX MCMASTER-CARR 7219K67
153 1 WALL MOUNT ENCLOSURE, 39.37H X 14.77W X 4.5D GRAINGER QO330MQ200RB
154 2 08-20003-21 LONG HOSE, AFT CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV
155 2 08-20003-22 SHORT HOSE, AFT CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV
156 2 08-20003-25 LONG HOSE, FWD CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV
157 2 08-20003-26 SHORT HOSE, FWD CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV
158 2 08-20003-29 HOSE, TOP AXEL CONNECTION, FRAME ASSEMBLY, NBOC MLV
159 2 08-20003-30 HOSE, BOTTOM AXEL CONNECTION, FRAME ASSEMBLY, NBOC MLV
ITEM
NO. QTY PART NO. DESCRIPTION SOURCE SOURCE PART NO.
54 24 M16, ZINC PLATED, CLASS 8.8, STANDARD WASHER MCMASTER-CARR 91455A170
55 8 M16X2MM, NUT, ZINC PLATED, CLASS 8 MCMASTER-CARR 90591A220
56 4 HEX HEAD SCREW, M16X2 X 70MM, CLASS 8.8, ZINC PLATED MCMASTER-CARR 91280A012
57 11 WASHER, .3125, ZINC YELLOW CHROMATE PLATED, GRADE 9 MCMASTER-CARR 90850A150
58 11 CARRIAGE BOLT, .3125-18 X 3IN, GRADE 5 MCMASTER-CARR 90185A595
59 11 0.3125-16 NUT, GR8, ZINC YELLOW CHROMATE MCMASTER-CAR 94895A030
60 8 HEX HEAD SCREW, M16X2 X 40MM, GRADE 8, ZINC PLATED MCMASTER-CARR 91280A840
61 6 FHS, 10-32 X 1 IN, 82 DEG, 316 STAINLESS MCMASTER-CARR 90585A992
62 9 M10X1.5MM, 30MM, HHCS, CLASS 10.9 ZNC YELLOW CHROMATE PLATED MCMASTER-CARR 90854A192
63 4 HEX HEAD SCREW, M10X1.5 X 35MM, CLASS 8.8, ZINC PLATED MCMASTER-CARR 91280A636
64 4 M10X1.5MM, 25MM, HHCS, CLASS 10.9, ZINC YELLOW CHROMATE PLATED MCMASTER-CARR 90854A189
65 16 M8, ZINC PLATED, CLASS 8.8, STANDARD WASHER MCMASTER-CARR 91455A130
66 8 M8X1.25 HEX NUT, CLASS 8.8, ZINC PLATED MCMASTER CARR 90591A161
67 8 HEX HEAD SCREW, M8X1.25 X 70MM, CLASS 8.8 MCMASTER-CARR 91280A554
68 4 WASHER, M48 MCMASTER-CARR 98689A261
69 4 HEX NUT, M48 X 5, CLASS 8 MCMASTER-CARR 97700A340
70 4 M20X2.5MM, 55MM, HHCS, CLASS 10.9, ZINC YELLOW CHROMATE PLATED MCMASTER-CARR 90854A314
71 8 M6X1MM, 60MM, SHCS, BLACK OXIDE UNBRAKO 122088
72 4 M16 X 2MM, 50MM, HHCS, CLASS 8.8, ZINC PLATED MCMASTER-CARR 91280A844
73 1 -8 FERULOK TO -8 FERULOK, STRAIGHT ADAPTER, HIGH PRESSURE FITTING PARKER HANNIFIN 8 HBU-S
74 3 1IN, HYDRAULIC QUICK DISCONNECT SOCKET, ZINC PLATED STEEL MCMASTER-CARR 5341K51
75 3 1 IN, HYDRAULIC QUICK DISCONNECT PLUG, ZINC PLATED STEEL MCMASTER-CARR 5341K56
76 6 0.5" NPT HYDRAULIC QUICK DISCONNET PLUG, ZINC PLATED STEEL MCMASTER-CARR 5341K54
77 5 HOSE COUPLING, QUICK DISCONNECT, .5 NPT MCMASTER-CARR 5341K48
78 8 TRIPLE LOK 37 #6, MALE FLARELESS BITE PARKER 6 XHBU-S
79 9 90° ELBOW, FEULOK 24°, SIZE -6 PARKER 6 EBU-S
80 2 FERULOK 24°, TUBE TO TUBE STRAIGHT, -6 SIZE PARKER 6 HBU-S
81 8 STRAIGHT THREAD CONNECTOR, #6, TRIPLE LOK 37 PARKER 6 F5OX-S
82 4 PIPE FITTING PARKER 6 P5ON-S
83 3 ENERPAC 3/8 HIGH FLOW HYDRAULIC COUPLER, MALE HALF ENERPAC CH604
84 1 PARKER MALE AN6 - MALE 3/8 NPT UNION PARKER 6-6 FTX
85 1 PIONEER 3/8 BODY, 3/8 NPT, HYDRAULIC QD MALE PARKER 4010-3P
86 1 DUSTCAP FOR 4010-3P NIPPLE PARKER 5205-3M
87 1 DUSTCAP FOR 4050-3P COUPLER PARKER 5209-3M
88 3 FITTING, 37° FLARE, TUBE TO SAE-ORB PARKER 16-12 F5OX-S
89 2 TRIPLE-LOK 37° STRAIGHT F5OX PARKER 12 F5OX-S
90 8 TRIPLE-LOK 37° FLARE TUBE FITTING AND ADAPTER PARKER 8-12 F5OX-S
91 2 TRIPLE-LOK 37° FLARE TUBE FITTING AND ADAPTER PARKER 6-12 F5OX-S
92 8 TRIPLE-LOK 37 DEG, FLARE TUBE FITTING/ADAPTER PARKER 12-8 F5OX-S
93 8 TRIPLE-LOK 37° 90° ELBOW PARKER 12 X6EF-S
94 4 HYDRAULIC QUICK DISCONNECT SOCKET, .75 NPT MCMASTER-CARR 5341K49
95 4 COUPLING, QUICK DISCONNECT HOSE, .75" MCMASTER-CARR 5341K55
96 4 CBDT ALUMINUM CARTRIDGE BODY, SAE 8 PORT, T-11A CAVITY BOSCH REXROTH R978041747
97 1 -16 TRIPLE-LOK MALE TO SAE MALE, STRAIGHT ADAPTER, HIGH PRESSURE FITTING PARKER HANNIFIN 16 F5OX-S
98 10 ELBOW ADAPTER, 90 DEG, MALE FLARELESS BITEXMNPTF, .5IN PARKER 8-8 CBU-S
99 4 ELBOW ADAPTOR, 90 DEG, MALE FLARELESS BITE X MNPTF PARKER 16 CBU-S
100 8 CARTRIDGE VALVE, SCREW IN BOSCH R930006112
101 8 ELBOW ADAPTER, 90 DEG, MALE -MALE, 5000 PSI PARKER 8 C5BU-S
102 4 UNION, ZINC-PLATED STEEL, 1 IN PARKER 16 HBU-S
103 4 CONVERSION ADAPTER, TUBE AND HOSE CONNECTION PARKER 16 XHBU-S
104 4 1 NPT MALE TO -16 FERULOK, STRAIGHT ADAPTER, HIGH PRESSURE FITTING PARKER HANNIFIN 16 FBU-S
105 1 QUICK DISCONNECT COUPLING, 1.25 NPT, FEMALE MCMASTER-CARR 53645K53
106 2 1 NPTF - 1 1/4 NPT PIPE THREAD REDUCER PARKER 1 1/4 X 1 PTR
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:48
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 2 OF 12
08-20003
A A
B B
C C
D D
E E
F F
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH. B
AA
C
GJ
L
M
N
P
R
TV
BB
AGAG
AH
AH
30 2X
D5
F3
F8
B2
F5
B4
B6
F2
D8
B6
D3
D E
C8
F6
F H
K
CA
29 6X 4 E2
E4
D6
28 7X
CUT GRATING AS REQUIRED TO
FIT AROUND TOE BOARDS AND
HYDRAULIC CYLINDER TABS
D2
11X
REF
8X
8X
VIEW A-A
90.00°
SCALE 1 : 12
201 2X
VIEW B-B
90.00°
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:24
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 3 OF 12
08-20003
A A
B B
C C
D D
E E
F F
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH. B
DETAIL C
TYP 2 PLACES
SCALE 1 : 6
44 4X
46 4X
B6
B6
DETAIL D
TYP 4 PLACES
SCALE 1 : 12
44 6X
46 12X
53 6X
B2
DETAIL E
TYP 2 PLACES
SCALE 1 : 6
19811
12 12X 194 6X
69 2X
68 2X
B2
DETAIL F
TYP 4 PLACES
SCALE 1 : 6
36 6X
46 6X
E6
DETAIL H
TYP 3 PLACES
GRATING HIDDEN
FOR CLARITY
SCALE 1 : 6
2X
4X
2X
4X
8X
4X
E6
DETAIL G
TYP 8 PLACES
SCALE 1 : 4
2X
4X
2X
3 REF
B6
DETAIL J
TYP 4 PLACES
SCALE 1 : 4
4X
8X
4X
B6
DETAIL L
TYP 4 PLACES
SCALE 1 : 4
31 47
4X
8X
4X
B6
DETAIL K
TYP 5 PLACES
GRATING HIDDEN
FOR CLARITY
SCALE 1 : 6
4X
8X
4X
2X
4X
2X
E6
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:24
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 4 OF 12
08-20003
A A
B B
C C
D D
E E
F F
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH. B
(UNLESS NOTED)
DETAIL M
SCALE 1 : 12
2X
4X
2X
8X
16X
8X
2X
4X
2X
B6
DETAIL N
TYP 6 PLACES
SCALE 1 : 4
7 REF
2X
4X
2X
2X
4X
2X
B6
DETAIL P
TYP 2 PLACES
SCALE 1 : 4
16 REF
2X
4X
2X
B6
DETAIL R
TYP 4 PLACES
SCALE 1 : 4
B6
9.8
DETAIL T
TYP 4 PLACES
SCALE 1 : 4
B6
5 REF
55 54
2X
DETAIL V
TYP 8 PLACES
SCALE 1 : 4
B6
60 54
SECTION AG-AG
SCALE 1 : 8
4X
8X
4X
B6
5811X
5711X
5911X
AJ
AJ
SECTION AH-AH
SCALE 1 : 12
62 3X
50 6X
48 3X
B6
434X
508X
484X
SECTION AJ-AJ
TYP 2 PLACES
SCALE 1 : 12
25 REF
502X
2X
4X
2X
62 2X
50 4X
48 2X
B6
DETAIL CA
SCALE 1 : 6
4X
4X
E6
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:24
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 5 OF 12
08-20003
A A
B B
C C
D D
E E
F F
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH. B
ALL COMPONENTS THAT DO NOT INTERFACE DIRECTLY
WITH THE HYDAULIC RUNS HAVE BEEN HIDDEN FOR CLARITY
FWD
AB
8808-20003-40
08-20003-41
08-20003-43
08-20003-42
08-20003-45
08-20003-44
08-20003-48
08-20003-49
08-20003-50
08-20003-51
08-20003-47
08-20003-52
08-20003-46
08-20003-53
08-20003-54
08-20003-55
DETAIL AB
180°
HOSES AND MOUNTING
COMPONENTS HIDDEN
FOR CLARITY
SCALE 1 : 4
B B B B B
HOSE FABRICATION REQUIREMENTS TABLE:
CUT HOSES TO NECESSARY LENGTH ENSUREING THEY ARE NOT TIGHT AND CAN BE ROUTED THROUGH SPECIFIED MOUNTING POINTS.13.
OAL IS MEASURED FACE TO FACE OR CENTER OF ELBOW TO FACE OF FITTINGS. RECORD THIS LENGTH IN THE 'MEASURED OAL' COLUMN.14.
ALL HOSE AND FITTINGS SHALL BE FROM PARKER HANNIFIN OR EQUIVALENT.15.
ALL QUICK COUPLINGS SHALL BE FROM MCMASTER-CARR OR EQUIVALENT AND INSTALLED ON FITTING 2.16.
ALL HOSE ASSEMBLIES SHALL BE TESTED TO THE MANUFACTURERS WORKING PRESSURE OF THE HOSE AND HAVE TEST REPORTS PROVIDED.17.
* ALL COMPONENTS SHALL BE FROM MCMASTER-CARR OR EQUIVALENT
** COMPONENTS TO BE DETERMINED UPON RECIEVING POWERTECH GENERATOR PTI-38-SI AND RECORDED IN TABLE
PART NO. QTY DESCRIPTION HOSE SOURCE
PART NO.
FITTING 1 SOURCE
PART NO.
FITTING 2 SOURCE
PART NO.
QUICK COUPLING
SOURCE PART NO. MEASURED OAL
08-20003-21 2 LONG HOSE, AFT CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV 302-12 13943-12-12 11343-12-12 5341K55 08-20003-22 2 SHORT HOSE, AFT CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV 302-12 13943-12-12 11343-12-12 5341K49 08-20003-25 2 LONG HOSE, FWD CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV 302-12 13943-12-12 11343-12-12 5341K55 08-20003-26 2 SHORT HOSE, FWD CHASSIS JACK, FRAME ASSEMBLY, NBOC MLV 302-12 13943-12-12 11343-12-12 5341K49 08-20003-29 2 HOSE, TOP AXEL CONNECTION, FRAME ASSEMBLY, NBOC MLV 302-6 1L943-6-6 1L943-6-6 N/A 08-20003-30 2 HOSE, BOTTOM AXEL CONNECTION, FRAME ASSEMBLY, NBOC MLV 302-6 1L943-6-6 10643-6-6 N/A 08-20003-33 1 DIVERTER HOSE 1, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV 302-6 1L943-6-6 10643-6-6 N/A 08-20003-34 1 DIVERTER HOSE 2, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV 302-6 1L943-6-6 10643-6-6 N/A 08-20003-35 1 SUPPLY HOSE, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV 302-6 10643-6-6 11343-6-6 N/A 08-20003-36 1 HOSE, PARKING BRAKE SHUT OFF, FRAME ASSEMBLY, NBOC MLV 302-6 1L943-6-6 1L943-6-6 N/A 08-20003-37 2 DIVERTER HOSE, PARKING BRAKE SHUTOFF, FRAME ASSEMBLY, NBOC MLV 302-6 10643-6-6 10643-6-6 N/A 08-20003-39 1 HOOKUP HOSE, SERVICE BRAKE, FRAME ASSEMBLY, NBOC MLV 302-6 11343-6-6 11343-6-6 4050-3P 08-20003-40 1 HOSE 1, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-16 14143-16-16 10143-16-16 5341K51 08-20003-41 1 HOSE 2, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-16 13943-16-16 10143-16-16 5341K56 08-20003-42 1 HOSE 3, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-16 13943-16-16 10143-16-16 5341K51 08-20003-43 1 HOSE 4, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-16 14143-16-16 10143-16-16 5341K56 08-20003-44 1 HOSE 5, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-12 13943-12-12 10143-16-12 5341K56 08-20003-45 1 HOSE 6, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-12 14143-12-12 10143-16-12 5341K51 08-20003-46 1 HOSE 7, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 13943-8-8 10143-8-8 5341K48 08-20003-47 1 HOSE 8, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 14143-8-8 10143-8-8 5341K48 08-20003-48 1 HOSE 9, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 14143-8-8 10143-8-8 5341K48 08-20003-49 1 HOSE 10, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 13943-8-8 10143-8-8 5341K54 08-20003-50 1 HOSE 11, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 13943-8-8 10143-8-8 5341K48 08-20003-51 1 HOSE 12, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 14143-8-8 10143-8-8 5341K54 08-20003-52 1 HOSE 13, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 13943-8-8 10143-8-8 5341K54 08-20003-53 1 HOSE 14, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 14143-8-8 10143-8-8 5341K54 08-20003-54 1 HOSE 15, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 13943-6-8 10143-8-8 5341K48 08-20003-55 1 HOSE 16, MANIFOLD, FRAME ASSEMBLY, NBOC MLV 302-8 13943-6-8 10143-8-8 5341K54 08-20003-56* 2 FUEL HOSE, FEMALE QUICK CONNECT, FRAME ASSEMBLY, NBOC MLV 7434N11 7043N13 7043N13 5341K45 08-20003-57* 1 LONG FUEL HOSE, MALE QUICK CONNECT, FRAME ASSEMBLY, NBOC MLV 7434N11 7043N13 7043N13 5341K57 08-20003-58* 1 SHORT FUEL HOSE, MALE QUICK CONNECT, FRAME ASSEMBLY, NBOC MLV 7434N11 7043N13 7043N13 5341K57 08-20003-60* 1 FUEL HOSE 1, GEN SET, FRAME ASSEMBLY, NBOC MLV 7434N11 7043N14 ** ** 08-20003-61* 1 FUEL HOSE 2, GEN SET, FRAME ASSEMBLY, NBOC MLV 7434N11 7043N14 ** **
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
HYDRAULIC RUNS,
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:36
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 6 OF 12
08-20003
A A
B B
C C
D D
E E
F F
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH. B
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
HYDRAULIC RUNS,
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:12
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 7 OF 12
08-20003
A A
B B
C C
D D
E E
F F
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
UNCLASSIFIED
UNCLASSIFIED
AKAK
ALAL
AM
AM
AT
AUAU
AW
BJ
CB
156 2X
157 2X
HARD LINE 40
HARD LINE 41
F7
B6
AV
BC
BG
BH
BK
SECTION AK-AK
HARD LINE 1
HARD LINE 2
HARD LINE 3
HARD LINE 4
HARD LINE 5
HARD LINE 6
HARD LINE 7
HARD LINE 8
HARD LINE 9
HARD LINE 10
HARD LINE 11
HARD LINE 12
HARD LINE 13
HARD LINE 14
HARD LINE 15
HARD LINE 16
HARD LINE 17
HARD LINE 18
HARD LINE 19
HARD LINE 20
HARD LINE 21
HARD LINE 22
HARD LINE 38
HARD LINE 39 159
1542X
1552X
HARD LINE 42
HARD LINE 43
124 2X
118 5X
118 10X
123 6X
124 4X
123 2X
188 4X
187 5X
187 5X
B5
D1
B6
D6
F3
158 78
BD
BE
SECTION AL-AL
HARD LINE 23
HARD LINE 24
HARD LINE 25
HARD LINE 26
HARD LINE 27
HARD LINE 28
HARD LINE 29
HARD LINE 30
HARD LINE 31
HARD LINE 32
HARD LINE 33
HARD LINE 34
HARD LINE 35
16378
123 38X 123 16X 189 10X
189 AR
D4
D3
BB
SECTION AM-AM
HARD LINE 36
HARD LINE 37
D8
ALL COMPONENTS THAT DO NOT INTERFACE DIRECTLY
WITH THE HYDAULIC RUNS HAVE BEEN HIDDEN FOR CLARITY
FWD
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
HYDRAULIC RUNS,
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:18
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 8 OF 12
08-20003
A A
B B
C C
D D
E E
F F
UNCLASSIFIED
B
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
DETAIL AT
SCALE 1 : 4
103 4X
FLARE AND STAGGER PIPE ENDS AS
NECESSARY TO ENSURE EASE OF
CONNCECTING / DISCONNECTING
1244X
C6VIEW AU-AU
SCALE 1 : 6
6X
5X
5X
5X
2X
2X
2X
2X
HARD LINE 40
HARD LINE 41
118 10X
1242X
C6
DETAIL AV
SCALE 1 : 4
107 104
105104
HARD LINE 40
HARD LINE 41
1242X
AR
AR
F6 DETAIL AW
SCALE 1 : 2
1024X
73 CONNECTING
HARD LINE 15 & 20
CONNECTING
HARD LINES 6-9 & 16-19
C6
DETAIL BB
SCALE 1 : 2
8080 CONNECTING
HARD LINE 36 & 43
CONNECTING
HARD LINE 37 & 42
D1
DETAIL BC
SCALE 1 : 2
CONNECTING
HARD LINE 38 & 42
CONNECTING
HARD LINE 39 & 43
189 AR
F6
DETAIL BD
SCALE 1 : 4
191 2X
1902X
HARD LINE 24 HARD LINE 30
HARD LINE 31
HARD LINE 25
183182
189 AR
B6
DETAIL BE
SCALE 1 : 2
1922X
HARD LINE 30
HARD LINE 31
B6
DETAIL BG
SCALE 1 : 4
F6
DETAIL BH
TYP 2 PLACES
SCALE 1 : 2
HARD LINE 22
OTHER LOCATION: HARD LINE 24
HARD LINE 23
F6
DETAIL BJ
SCALE 1 : 2
164 HARD LINE 21
HARD LINE 25
C6 DETAIL BK
SCALE 1 : 4
HARD LINE 21 HARD LINE 22
F6
ALL COMPONENTS THAT DO NOT INTERFACE DIRECTLY
WITH THE HYDAULIC RUNS HAVE BEEN HIDDEN FOR CLARITY
FWD
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
HYDRAULIC RUNS,
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:24
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 9 OF 12
08-20003
A A
B B
C C
D D
E E
F F
UNCLASSIFIED
B
REV 03/2024
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
AE
BA
AD
AP
AR
FWD LOOKING AFT
DETAIL AD
SCALE 1 : 6
4X
157 REF
156 REF
TORQUE TO 154 FT-LBS [209 NM]
157 REF
156 REF
4X
8X
4X
2X
101 HARD LINE 3
HARD LINE 4
HARD LINE 1
HARD LINE 2
USE ITEM 66 NUT
DETAIL AE
TYP 2 PLACES
SCALE 1 : 6
2X
TORQUE TO 154 FT-LBS [209 NM] 92
2X
2X
4X
HARD LINE 12
OTHER LOCATION: HARD LINE 14
HARD LINE 11
OTHER LOCATION: HARD LINE 13 101
ALL COMPONENTS THAT DO NOT INTERFACE DIRECTLY
WITH THE HYDAULIC RUNS HAVE BEEN HIDDEN FOR CLARITY
FWD
DETAIL AP
TYP 4 PLACES
SCALE 1 : 4
DETAIL AR
TYP 4 PLACES
SCALE 1 : 4
AY
AFT LOOKING FWD
DETAIL AY
SCALE 1 : 4
19 71
4X
4X
2X
3X
DETAIL BA
SCALE 1 : 4
164 2X 16382 2X
81 3X 19 71
4X
4X
DETAIL CB
SCALE 1 : 9
112 111115114 113
162 REF
116 REF 117 REF163 REF108
C6
87 USE ITEM 66 NUT 2X
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
HYDRAULIC RUNS,
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:32
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 10 OF 12
08-20003
A A
B B
C C
D D
E E
F F
UNCLASSIFIED
B
REV 03/2024
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
ALL COMPONENTS THAT DO NOT INTERFACE DIRECTLY
WITH THE ELECTRICAL RUNS HAVE BEEN HIDDEN FOR CLARITY
FWD
BL BM
BN
BP
BR
BT
BU
GEN TO PP1
PP1
CP1
1402X
120 2X
119 2X
120 2X
127 AR
127 AR
126 AR
126 AR
126AR
F6
D312
C6
F2
F7
F312
D1
143153
1442X
BV
BW
BY
LDL1
P2 128 2X
F5 12
C7
C4
SCALE 1 : 4
J117
J116
J115
J114
J120 J118J119
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
ELECTRICAL RUNS,
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:14
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 11 OF 12
08-20003
A A
B B
C C
D D
E E
F F
UNCLASSIFIED
B
REV 03/2024
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
DETAIL BL
O1 & O2
SCALE 1 : 2
131139
D5
DETAIL BM
LSW1 & LSW2
SCALE 1 : 4
199 2X
133 2X
134 2X 136 2X
D5
DETAIL BN
SCALE 1 : 4
D5
DETAIL BP
SCALE 1 : 4
131 2X
140 2X
2X
140 7X
144 2X
D5
2X
DETAIL BR
D1A & D1B
SCALE 1 : 2
D5
204 2X
B
DETAIL BT
SCALE 1 : 4
131 3X1402X
CONNECTS TO
ITEM 137
D5
DETAIL BU
O3
SCALE 1 : 2
D5
DETAIL BV
SCALE 1 : 4
144 2X
E5
DETAIL BW
SCALE 1 : 4
1382X
1362X 137 140
3X
1312X
1402X
126AR
E5
DETAIL BY
SCALE 1 : 7
135 136
3X
1502X
151 2X
125 CUT TO LENGTH AS REQUIRED
MATCH DRILL ITEM 21
FOR MOUNTING HARDWARE
128 AR
E5
1522X
ALL COMPONENTS THAT DO NOT INTERFACE DIRECTLY
WITH THE ELECTRICAL RUNS HAVE BEEN HIDDEN FOR CLARITY
FWD
B
B
N/A
NBOC MLV
08-20001
ENG.
DFT.
CHK.
DES.
ELECTRICAL RUNS,
FRAME ASSEMBLY, NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:14
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.
X.X
X.XX
X.XXX
.1
.02
.005
.25
REV 03/2024
APPROX. WEIGHT
CAGE CODE
33993.0
SHEET 12 OF 12
08-20003
A A
B B
C C
D D
E E
F F
UNCLASSIFIED
UNCLASSIFIED
REV 03/2024
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN:
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH. B
12X .433in 11mm THRU ALL
1.250
2.000
3X EQ. SP. @
24.000 = 72.000
4X 1.500
4X .315
4X 1.156 0 4.
7.
.5
.2
.7
.5
6.
5 0.014 M B A C
C
101.50
10X .610in 15.50mm THRU ALL
1.540
4.210
1.
4.
.5
0.
.5
00 4.
08-20003-01-XX-YY
.014 M C A B
A
B
4.00 2X R.50
R.19
7.00 .50
.50
NOTES (UNLESS OTHERWISE SPECIFIED):
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED1.
FASTENER CLEARANCE HOLE NORMAL FIT TOLERANCES PER ASME B18.2.8-1999 OR ISO 273-1979 FOR SIZES NOT COVERED BY2.
ASME B18.2.8-1999
REMOVE BURRS AND BREAK SHARP EDGES .005-.010 MAX3.
STAMP IN 0.5 HIGH CHARACTERS4.
XX = LOT NUMBER1.
YY = SERIAL NUMBER2.
FINISH AS DIRECTED:5.
REMOVE ALL SURFACE RUST, OIL AND GREASE PER NASA-STD-5008B §4.4.2 TO INCLUDE SUB-SECTIONS1.
ALL SURFACES SHALL BE DEGREASED AND DRY PRIOR TO APPLYING PRIMER2.
APPLY CARBOLINE CARBOZINC 11 WB PRIMER PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS3.
APPLY CARBOLINE CARBOACRYLIC 3358 MIDCOAT (BROWN) PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS4.
APPLY A MINIMUM OF TWO COATS CARBOLINE CARBOACRYLIC 3359 TOPCOAT (CARBOLINE COLOR CODE N656,5.
EQUIVALENT FED-STD-595 COLOR YELLOW, NO. 13538) PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS
SHEET 1 OF 1
ENG.
DFT.
CHK.
DES.
L-ANGLE, FRAME ASSEMBLY, NBOC
MLV
-125SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
C
SCALE:
TITLE:
REV.08-20003-01
145.4
APPROX. WEIGHT
CAGE CODE
.1
.02
.005
.25
X.X
X.XX
X.XXX
TOLERANCE (INCH)
THIRD ANGLE PROJECTION
INTERPRET PER ASME Y14.5-2009
A572 GR. 50
MATERIAL:
PROJECT:
DO NOT SCALE
FROM DRAWING
NEXT ASSEMBLY:
08-20003
NBOC MLV
1:8
REV 03/2024
DATE:A A
B B
C C
D D
E E
1UNCLASSIFIED
DATE REV. DESCRIPTION ENG/DFT
8/12/2024 - ORIGINAL RELEASE MTT
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN:
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT-CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED
COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES
DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE,
IMPRISONMENT, OR BOTH.
A
UNCLASSIFIED1
6.75 32.75
40.75 63.75
67.75
0.03 A
4.00
7.00
.38
.38
2X R.37 R.19
2X 6.438
3.000
1.750
1.125
38.375
4X .413in 10.50mm THRU ALL
4.
08-20003-02-XX-YY
0.014 A B C
B
C
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED1.
FASTENER CLEARANCE HOLE CLOSE FIT TOLERANCES PER ASME2.
B18.2.8-1999 OR ISO 273-1979 FOR SIZES NOT COVERED BY ASME
B18.2.8-1999
REMOVE BURRS AND BREAK SHARP EDGES .005-.010 MAX3.
STAMP IN 0.5 HIGH CHARACTERS4.
XX = LOT NUMBER1.
YY = SERIAL NUMBER2.
FINISH AS DIRECTED:5.
REMOVE ALL SURFACE RUST, OIL AND GREASE PER NASA-STD-1.
5008B §4.4.2 TO INCLUDE SUB-SECTIONS
ALL SURFACES SHALL BE DEGREASED AND DRY PRIOR TO2.
APPLYING PRIMER
APPLY CARBOLINE CARBOZINC 11 WB PRIMER PER NASA-STD-3.
5008B §4.4.3 TO INCLUDE SUB-SECTIONS
APPLY CARBOLINE CARBOACRYLIC 3358 MIDCOAT (BROWN) PER4.
NASA-STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS
APPLY A MINIMUM OF TWO COATS CARBOLINE CARBOACRYLIC5.
3359 TOPCOAT (CARBOLINE COLOR CODE N656, EQUIVALENT
FED-STD-595 COLOR YELLOW, NO. 13538) PER NASA-STD-5008B
§4.4.3 TO INCLUDE SUB-SECTIONS
DATE REV. DESCRIPTION ENG/DFT
SHEET 1 OF 1
A572 GR. 50
NBOC MLV
08-20003
ENG.
DFT.
CHK.
DES.
L-ANGLE, CUT, FRAME ASSEMBLY,
NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
125SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
B
NEXT ASSEMBLY:
PROJECT:
1:12
SCALE:
MATERIAL:
TITLE:
DATE:
REV.08-20003-02
X.X
X.XX
X.XXX
.1
.02
.005
.25
APPROX. WEIGHT
CAGE CODE
66.6
REV 03/2024
INTERPRET PER ASME Y14.5-2009
A A
B B
C C
D D
6 5
2 1
DATE REV. DESCRIPTION ENG/DFT
8/12/2024 - ORIGINAL RELEASE MTT
NOTES (UNLESS OTHERWISE SPECIFIED):
6UNCLASSIFIED
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT-CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE.
VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
UNCLASSIFIED11
4.00
24X .433 11.00 THRU ALL
4.
6.
9.
.3
.2
.0
.3
.3
.5
.2
3.
1.
4.
7.
2.
8.
1.
1.
3.
1.250 3.250
A
0.014 B A C
A
7.00
10X .610 15.50 THRU ALL 0
1.
7.
.5
.5
3.
.0
1.540
5.750
4.
08-20003-03-XX-YY
0.014 A B C
B
C
.50
7.00
4.00
1.25
1.50
.315
DETAIL A
SCALE 1 : 4
TYP - 7 PLACES
0.010 B C
NOTES (UNLESS OTHERWISE SPECIFIED):
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED1.
FASTENER CLEARANCE HOLE NORMAL FIT TOLERANCES PER ASME B18.2.8-1999 OR ISO 273-1979 FOR SIZES NOT COVERED BY ASME B18.2.8-19992.
REMOVE BURRS AND BREAK SHARP EDGES .005-.010 MAX3.
STAMP IN 0.13 HIGH CHARACTERS4.
XX = LOT NUMBER1.
YY = SERIAL NUMBER2.
FINISH AS DIRECTED:5.
REMOVE ALL SURFACE RUST, OIL AND GREASE PER NASA-STD-5008B §4.4.2 TO INCLUDE SUB-SECTIONS1.
ALL SURFACES SHALL BE DEGREASED AND DRY PRIOR TO APPLYING PRIMER2.
APPLY CARBOLINE CARBOZINC 11 WB PRIMER PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS3.
APPLY CARBOLINE CARBOACRYLIC 3358 MIDCOAT (BROWN) PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS4.
APPLY A MINIMUM OF TWO COATS CARBOLINE CARBOACRYLIC 3359 TOPCOAT (CARBOLINE COLOR CODE N656, EQUIVALENT FED-STD-595 COLOR YELLOW, NO. 13538) PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS5.
SHEET 1 OF 1
A572 GR. 50
NBOC MLV
08-20003
ENG.
DFT.
CHK.
DES.
LONG L-ANGLE, FRAME ASSEMBLY,
NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
125SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
D
NEXT ASSEMBLY:
PROJECT:
1:8
SCALE:
INTERPRET PER ASME Y14.5-2009
MATERIAL:
TITLE:
DATE:
REV.08-20003-03
X.X
X.XX
X.XXX
.1
.02
.005
.25
APPROX. WEIGHT
CAGE CODE
240.83
REV 03/2024
A A
B B
C C
D D
E E
F F
UNCLASSIFIED
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS EXPORT- CONTROLLED. IT IS PROHIBITED FOR SALE, EXPORT, RE-EXPORT OR TRANSFER TO ORGANIZATIONS AND NATIONALS OF EMBARGOED COUNTRIES: CUBA, SUDAN, NORTH KOREA, IRAN, SYRIA AND CRIMEA A REGION OF UKRAINE, UNLESS AN EXPORT LICENSE OBTAINED FROM THE BUREAU OF INDUSTRY AND SECURITY, UNITED STATES DEPARTMENT OF COMMERCE. VIOLATIONS OF THESE REGULATIONS ARE PUNISHABLE BY FINE, IMPRISONMENT, OR BOTH.
DATE REV. DESCRIPTION ENG/DFT
9/30/2024 - ORIGINIAL RELEASE LTB
31.03
4X R3.00
7.03
.38
10.64
24.13
38.1°
R.75
3.75 V.S.
21.38 V.S.
2.13 V.S.
10.58 V.S.
33.30 35.63
4.
08-20003-04-XX-YY
A1 A2
B1 C1
C2
C3
C4
B2
B3 B4
B5
C5
C6
B6
A
B
X
Y
.50 STK
C
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE SPECIFIED1.
FASTENER CLEARANCE HOLE CLOSE FIT TOLERANCES PER ASME2.
B18.2.8-1999 OR ISO 273-1979 FOR SIZES NOT COVERED BY ASME
B18.2.8-1999
REMOVE BURRS AND BREAK SHARP EDGES .005-.010 MAX3.
STAMP IN 0.13 HIGH CHARACTERS4.
XX = LOT NUMBER1.
YY = SERIAL NUMBER2.
FINISH AS DIRECTED:5.
REMOVE ALL SURFACE RUST, OIL AND GREASE PER NASA-1.
STD-5008B §4.4.2 TO INCLUDE SUB-SECTIONS
ALL SURFACES SHALL BE DEGREASED AND DRY PRIOR TO2.
APPLYING PRIMER
APPLY CARBOLINE CARBOZINC 11 WB PRIMER PER NASA-3.
STD-5008B §4.4.3 TO INCLUDE SUB-SECTIONS
APPLY CARBOLINE CARBOACRYLIC 3358 MIDCOAT4.
(BROWN) PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-
SECTIONS
APPLY A MINIMUM OF TWO COATS CARBOLINE5.
CARBOACRYLIC 3359 TOPCOAT (CARBOLINE COLOR CODE
N656, EQUIVALENT FED-STD-595 COLOR YELLOW, NO.
13538) PER NASA-STD-5008B §4.4.3 TO INCLUDE SUB-
SECTIONS
.014 M C A B
.014 M C A B
.014 M C A B
DATE REV. DESCRIPTION ENG/DFT
TAG SIZE XLOC YLOC
A1
.413 THRU
.700 1.125
A2 2.700 1.125
B1
.413 THRU
4.155 7.875 B2 11.155 7.875 B3 13.405 15.125 B4 20.405 15.125 B5 22.655 22.375 B6 29.655 22.375 C1
.591 THRU
5.575 6.000 C2 5.575 10.210 C3 8.575 6.000 C4 8.575 10.210 C5 29.200 30.165 C6 29.200 34.375
SHEET 1 OF 1
A572 GR. 50
NBOC MLV
08-20003
ENG.
DFT.
CHK.
DES.
STAIR BRACKET, FRAME ASSEMBLY,
NBOC MLV
DO NOT SCALE
FROM DRAWING
THIRD ANGLE PROJECTION
125SURFACE FINISH IN
MICROINCHES RMS
(UNLESS NOTED)
TOLERANCE (INCH)
B
NEXT ASSEMBLY:
PROJECT:
1:8
SCALE:
MATERIAL:
TITLE:
DATE:
REV.08-20003-04
X.X
X.XX
X.XXX
.1
.02
.005
.25
APPROX. WEIGHT
CAGE CODE
58.1
REV 03/2024
INTERPRET PER ASME Y14.5-2009
A A
B B
C C
D D
6 5
2 16UNCLASSIFIED
A
THIS DRAWING IS THE PROPERTY OF THE NASA BALLOON PROGRAM AND MAY NOT BE USED, COPIED, OR DISTRIBUTED (OUTSIDE OF AUTHORIZED CONTRACTORS) FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
IS SUPPLIED WITHOUT THE EXPRESS WRITTEN AUTHORITY OF THE NASA BALLON PROGRAM.
EAR ECCN: EAR99
- EXPORT ADMINISTRATION REGULATIONS (EAR) NOTICE -
THIS DOCUMENT CONTAINS INFORMATION WITHIN THE PURVIEW OF THE EXPORT ADMINISTRATION REGULATIONS (EAR), 15 CFR §730-774, AND IS…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .