IDIQ Lines Item Prices.pdf

Line Reg Working plus; minus; or TOTAL Item No. Units QTY Hours net PRICE

Unless otherwise specified, all installed items must match building standard

DIV-2 DEMOLITION

2.1 Concrete core drill 4 in. diameter, up to 12 in. deep ea 5 $230.00 $1,150.00

2.2 Cost interest per inch for over 12" deep inch 2 $35.00 $70.00

2.3 Cut new hole into metal floor duct system for telephone or electrical ea 5 $22.00 $110.00

2.4 Demo Concrete to 6" thick Hydraulic hammer mesh reinforced (slab) sy 10 $140.00 $1,400.00

2.5 Demo Concrete to 6" thick Hydraulic hammer Rebar reinforced (slab) sy 10 $160.00 $1,600.00

2.6 Remove existing door and frame from drywall ea 50 $90.00 $4,500.00

2.7 Remove existing door and frame from masonry (Straight cut - no toothing) ea 10 $122.46 $1,224.62

2.8 Remove lath and plaster up to 3" inches thick sf 250 $5.52 $1,379.15

2.9 Remove metal stud and drywall partition sf 3,500 $3.30 $11,550.00

2.10 Remove metal stud and plaster partition sf 500 $6.00 $3,000.00

2.11 Remove ceiling grid tile, including grid systems sf 5,000 $0.92 $4,592.31

2.12 Remove ceiling tile, excluding grid system sf 5,000 $0.61 $3,061.54

2.13 Remove suspended drywall ceiling up to 1-1/2" inches thick, including suspension system sf 1,000 $1.84 $1,836.92

2.14 Remove carpet (glued down) sy 1,000 $2.10 $2,100.00

2.15 Remove carpet (tacked down) sy 500 $1.22 $612.31

2.16 Remove carpet pad (glued down) sy 1,000 $2.45 $2,449.23

2.17 Remove carpet pad (tacked down) sy 500 $1.22 $612.31

2.18 Remove existing vinyl or rubber cove base, 4in. or 6in lf 2,500 $0.57 $1,425.00

2.19 Remove vinyl wall covering (includes necessary wall repairs) sf 10,000 $0.80 $7,960.00

2.20 Remove chair rail, patch drywall or plaster as required lf 500 $2.55 $1,275.00

Demolition: including incidental repairs, disposal of material & moving of furniture

Indefinite Delivery Indefinite Quantity Construction Term Contract for general repairs and alterations to government owned and leased facilities in Richmond, Charlottesville, Danville, Harrisonburg and Tidewater areas in Virginia.

IDIQ LINE ITEM PRICES

DESCRIPTION OF WORK

2.21 Remove vinyl composite floor tile, including surface prep to new floor finish sf 1,000 $1.10 $1,100.00

2.21.1 Add to sand blast concrete floor surface sf 1,000 $4.50 $4,500.00

2.22 Remove Thin set Ceramic Tile (Walls and Floor) any size tile sf 500 $1.90 $950.00

2.23 Remove Mud set Ceramic Tile (Walls and Floor) any size tile sf 500 $2.30 $1,150.00

2.24 Substrate for uneven concrete flooring sf 500 $12.00 $6,000.00

2.25 Remove drywall from existing wood or metal studs sf 1,000 $0.60 $600.00

2.26 Remove flexible ductwork up to 5ft. Cap/seal abandoned opening ea 10 $20.00 $200.00

Cut new opening for door or window in existing interior partition, includes finishing to match adjacent surfaces:

2.27.1 Metal suds and drywall sf 25 $6.74 $168.38

2.27.2 Plaster (lath) sf 5 $8.57 $42.86

2.27.3 Masonry / CMU (Straight cut) sf 2 $12.25 $24.49

DIV-6 CARPENTRY

Refinish woodwork - strip and clear finish:

6.1.1 frames, chair rail, cove base and thresholds up to 8" wide lf 100 $6.00 $600.00

6.1.2 doors or walls, per side sf 100 $7.50 $750.00

6.2 Blocking in wall (fire resistant) lf 500 $0.70 $350.00

6.3 F & I 4 ft. X 8 ft. sheet of 3/4" plywood for backboard ea 3 $40.00 $120.00

6.4 Non-custom base cabinets, hardwood, prefinished two top drawers, two doors below, national finish or paint grade lf 6 $220.00 $1,320.00

6.5 Non-custom wall cabinets, hardwood, national finish or paint grade lf 6 $200.00 $1,200.00

6.6 laminate countertops, 24" wide with back and side splash lf 6 $55.00 $330.00

DIV-7 Sound insulation, 3 1/2 in. thickness

7.1 F&I unfaced msound insulation sf 10,000 $1.00 $10,000.00

7.2 F&I faced one side with kraft paper sound insulation sf 1,000 $1.50 $1,500.00

DIV-8

F&I single metal frame, B label (including necessary stud work for proper support):

8.1.1 drywall or plaster (3' x 7' Maximum size) ea 35 $330.00 $11,550.00

8.1.2 masonry (4, 6, or 8 in.) (3' x 7' Maximum size) ea 5 $435.00 $2,175.00

DOORS, FRAMES AND HARDWARE

Contractor shall F & I silencers, hinges, and door stops. Doors and frames shall be primed and painted or polyurethane

CUTTING, PATCHING & SUBFLOOR REPAIRS

Furnish double wide metal frame, B label (including necessary stud work for proper support):

8.2.1 drywall or plaster (6'X7' Maximum size) ea 10 $365.00 $3,650.00

8.2.2 masonry (4",6",or 8" thick) (6'X7' Max size) ea 5 $570.00 $2,850.00

F&I flush hollow core interior wood doors (3'x7' max size):

8.3.1 birch face ea 20 $310.00 $6,200.00

8.3.2 oak face ea 5 $320.00 $1,600.00

8.3.3 cherry face ea 5 $400.00 $2,000.00

8.3.4 walnut face ea 20 $450.00 $9,000.00

F&I flush solid core wood door with B label (3'x7' max size):

8.4.1 birch face ea 20 $650.00 $13,000.00

8.4.2 oak face ea 5 $585.00 $2,925.00

8.4.3 cherry face ea 5 $700.00 $3,500.00

8.4.4 walnut face ea 20 $750.00 $15,000.00

8.5 F&I hollow metal door, B label ea 25 $600.00 $15,000.00

8.6 Install door in existing wood or metal frame ea 20 $61.23 $1,224.62 HARDWARE (to match building standard)

8.7 Remove door stop from wall or floor. ea 20 $36.74 $734.77

8.8 F&I door closer ea 15 $306.15 $4,592.31

8.9 F&I Mortise Lockset ea 30 $489.85 $14,695.38

8.10 F&I cylindrical level locket ea 50 $300.00 $15,000.00

8.11 F&I cylindrical passage lockset ea 10 $105.32 $1,053.17

8.12 Add to replace new Medco core with mortise or cylindrical locksets ea 10 $115.00 $1,150.00

8.14 Furnish extra standard keys ea 150 $3.67 $551.08

8.14 Furnish extra Medco keys ea 100 $12.00 $1,200.00

8.15 Install government furnished lockset (Labor Only) ea 25 $36.74 $918.46

8.16 F&I Unican pushbutton lockset with key bypass, removable core ea 5 $734.77 $3,673.85

8.17 Remove existing lockset from door ea 25 $36.74 $918.46

8.18 F & I Heavy duty pinned security hinges (set of three) Stainless steel ea 5 $70.00 $350.00

8.19 F & I Electric door release w/ release Button ea 1 $525.00 $525.00

DIV-9 FINISHES

F&I lockset matching building standard (Kwickset, Russwin, Sargent, Schlage, Yale or equivalent) with 2 keys on or off

9.1 F&I standard partitions with drywall on 2 sides sf 8,000 $8.00 $64,000.00

9.2 F&I standard partitions with drywall on 1 sides sf 1,000 $6.00 $6,000.00

9.3 F&I metal stud and plaster including wire lathe sf 1,000 $14.70 $14,695.38

9.4 F&I metal stud and 5/8" drywall bulkhead, minimum 6", maximum 10" lf 500 $30.73 $15,366.00

9.5 Add for hat channel installed on existing C.M.U. wall in lieu of metal studs sf 1,000 $0.50 $500.00

9.6 F & I drywall on existing wood or metal studs sf 1,000 $3.00 $3,000.00 CEILING SYSTEMS - Match Building Standard

F&I individual suspended ceiling tile, lay-in type, 2' x 2'

9.7 (includes removal of existing tile) ea 100 $6.12 $612.31

F&I individual suspended ceiling tile, lay-in type, 2' x 4'

9.8 (includes removal of existing tile) ea 100 $9.80 $979.69

9.9 F&I suspended ceiling tile and grid system, 2' x 2' or 2' x 4' sf 1,500 $4.29 $6,429.23

9.10 F&I suspended premium ceiling tile and grid system (revealed edge tiles) (metric or standard) sf 5,000 $6.10 $30,500.00

9.11 Cut ceiling tile and grid system to facilitate installation of wall partition above ceiling height, includes reinstallation of ceiling to new wall partition on both sides lf 250 $11.02 $2,755.38

9.12 Repair ceiling tile and grid system where partition wall was removed lf 250 $8.57 $2,143.08

FLOOR COVERINGS

9.13 F&I 4 in. or 6 in. vinyl cove base. lf 500 $3.00 $1,500.00

9.14 F&I vinyl composite tile, 12" x 12" sf 500 $4.75 $2,375.00

9.15 Install gov't furnished carpet tiles, contractor supplied adhesive (max size 36") sy 300 $7.35 $2,204.31

9.16 Install gov't furnished carpet squares by jacking up of furniture, contractor supplied adhesive per manufacturer sy 300 $17.35 $5,205.00

9.17 Handling of Delivered carpet tiles/rolled: sy 300 $0.32

Install gov't furnished carpet roll goods:

9.18.1 Glue down sy 1,000 $7.96 $7,960.00

9.18.2 Tack down over existing pad sy 350 $8.57 $3,000.31

F & I Carpet pad:

9.19.1 1/4 in. minimum, felt type (Tack down) sy 300 $6.85 $2,055.00

STANDARD PARTITIONS: All line items include full floor-to-ceiling height (up to 12 ft) partition; including 5/8" inter, gypsum board, std, tape & finished & 1 coat of primer, metal studs, NLB, 25 ga., 16" O.C., 3-5/8" wide.

9.19.2 1/4 in. minimum, commercial foam (Glue down) sy 300 $5.30 $1,590.00

9.20 F&I carpet beveled vinyl transition strip lf 350 $3.06 $1,071.54

9.21 Epoxy concrete floor, 1 coat sf 100 $3.25 $325.00

F&I vinyl wall covering complying Federal Spec. CCC-W-408A (includes normal wall preparation):

9.22.1 Light Weight, 12-18 oz/sy sf 500 $2.40 $1,200.00

9.22.2 Medium Weight, 19 -24 oz/sy sf 500 $2.45 $1,224.62

9.22.3 Heavy Weight, 25 - 30 oz/sy sf 1,000 $3.43 $3,428.92

9.23 Install GOV furnished VWC ( includes normal wall preparation) sf 7,500 $1.30 $9,750.00

9.24 Install GOV. furnished fabric wallcovering ( includes normal wall prep) sf 1,000 $2.45 $2,449.23

9.25 F & I 4' long heavy Duty vinyl wall corner guards ea 10 $30.00 $300.00

PAINTING:

9.26 Two finish coats of paint, less than 1000 square feet, 0'-12' high sq ft 4,000 $1.00 $3,918.77

9.27 Two finish coats of paint, more than 1000 square feet, 0'-12' high sq ft 5,000 $0.86 $4,286.15

9.28 Two finish coats of paint, less than 1000 square feet, 12' and higher sq ft 750 $1.35 $1,010.31

9.29 Two finish coats of paint, more than 1000 square feet, 12' and higher sq ft 500 $1.22 $612.31

9.30 One coat of primer sf 4,000 $0.50 $2,000.00

9.31 Paint door, 3 ft x 7 ft max size, one side ea 50 $36.74 $1,836.92

9.32 Paint door, 3 ft x 7 ft max size, both sides ea 100 $61.23 $6,123.08

9.33 Paint doors and panels, dimensions other than standard sf 500 $1.57 $783.75

9.34 Paint door frame, one side ea 50 $20.82 $1,040.92

9.35 Paint door frame, two sides ea 100 $36.74 $3,673.85

9.36 Paint double door frame,one side ea 10 $30.62 $306.15

9.37 Paint double door frame,two side ea 25 $48.98 $1,224.62

9.38 Paint windows, mullions, and trim, enamel, or clear coat sf/open 1,000 $5.20 $5,204.61

9.39 Paint wood or metal chair rail, moldings, or base up to 8 in wide, enamel or clear coat lf 1,000 $1.65 $1,653.23

Repair damaged or deteriorated plaster, less than 25 sq yds

9.40 (Includes removal of all damaged material and rebuild wall; max 3 coats of plaster) sq yd 100 $40.41 $4,041.23

VINYL WALL COVERING (VWC)

Paint existing surfaces with two coats on either plaster, drywall, metal, wood, concrete or masonry. Includes moving furniture. Area shall be computed per the contract specifications.

Repair damaged or deteriorated plaster, more than 25 sq yds

9.41 (Includes removal of all damaged material and rebuild wall; max 3 coats of plaster) sq yd 100 $36.74 $3,673.85

9.42 Sand and spackle interior walls (above normal preparation) for drywall repairs sf 100 $1.75 $175.00

9.43 Thin coat of Plaster to smooth out walls Including 1 coat of primer sf 100 $1.50 $150.00

DIV 15 MECHANICAL / HVAC

15.1 Relocate pneumatic thermostat ea 10 $91.85 $918.46

15.2 Relocate electric thermostat ea 10 $79.60 $796.00

15.3 Relocate diffuser/grille within the limits of the flex-duct. ea 5 $70.00 $350.00

F&I flex-duct extension, tap in collar, damper and register to match

15.4 existing duct up to 12 in. diameter ea 5 $177.57 $887.85

15.5 F&I 2' X 2' return air grilles in ceiling, excluding any duckwork ea 5 $100.00 $500.00

15.6 F & I latch-locking metal access panel, up to 22" x 22" in size ea 5 $125.00 $625.00

15.7 F&I new sprinkler head in acoustical ceiling tile, includes up to 10ft of new pipe ea 10 $244.92 $2,449.23

15.8 Relocate sprinkler heads,straight drops,incl up to 10' of new pipe ea 20 $183.69 $3,673.85

15.9 F & I concealed sprinkle head ea 5 $45.00 $225.00

15.10 Relocate Strobe, up to 50 LF of new EMT and wire ea 10 $265.00 $2,650.00

15.11 F & I Strobe, incl. up to 50 EMT and wire ea 10 $460.00 $4,600.00

DIV 16

16.1 Remove light switch and wiring ea 20 $37.08 $741.51

Remove duplex receptacles and wiring:

16.2.1 From wall ea 30 $30.90 $926.89

16.2.2 From floor duct (F&I cap and plug assembly as approved by duct manuf.) ea 10 $55.61 $556.13

16.3 Remove fluorescent fixture and wiring ea 50 $62.00 $3,100.00 Remove voice/data cabling, outlet and conduit (Remove cabling all the way to terimation point):

16.4.1 From wall (F&I blank cover) ea 30 $50.00 $1,500.00

16.4.2 From floor duct (F&I cap and plug assembly as approved by duct system manuf.) ea 10 $75.00 $750.00

16.5 Remove exit sign (F&I blank cover, if required) ea 5 $55.61 $278.07 ELECTRICAL WORK: RELOCATION - Includes maximum 50 ft change in length of conduit and conductors.

16.6 Relocate incandescent fixture and wiring ea 5 $92.69 $463.44

ELECTRICAL WORK: DEMOLITION (Includes removal of all wire and conduit to closest junction box)

16.7 Relocate recess (lay-in) lighting fixture ea 30 $105.05 $3,151.42

16.8 Relocate surface mounted lighting fixture ea 5 $111.23 $556.13

16.9 Relocate (shift) light fixture in suspended ceiling (no elec disconnect) ea 25 $5.00 $125.00

16.10 Rezone light fixture and wiring (put the fixture on another circuit) ea 30 $67.97 $2,039.15

16.11 Relocate exit sign (F&I blank cover, if required) ea 5 $123.59 $617.93

ELECTRICAL WORK: NEW WORK. Includes a max. of 50' length of conduit and conductors. Does not include panel connections.

F & I snap switch and wiring :

16.11.1 single pole ea 50 $90.00 $4,500.00

16.11.2 3-way ea 10 $100.00 $1,000.00

16.12 F & I Switch Wall Dimmer 120/277V 20 min florescent ea 5 $140.00 $700.00

16.13 F&I duplex receptacle and wiring in wall ea 50 $127.00 $6,350.00

16.14 F&I duplex/quad receptacle and wiring in floor duct (existing hole) ea 10 $127.00 $1,270.00

16.15 F&I quad receptacle and wiring in wall ea 20 $152.00 $3,040.00

16.16 F&I GFCI receptacle and wiring in wall ea 10 $160.00 $1,600.00

16.17 F&I 220 volt dedicated receptacle and wire ea 10 $230.00 $2,300.00

16.18 F & I 120 volt, 20 amp dedicated isolated ground receptacle and wire ea 10 $230.00 $2,300.00

16.19 Install or disconnect GOV furnished whip or pigtail into existing receptacle ea 70 $32.77 $2,294.23

16.20 F&I box & 10lf conduit in wall with pull string (new construction) ea 20 $75.00 $1,500.00

16.21 F&I box & 10lf conduit in wall with pull string(fished into existing wall) ea 20 $127.00 $2,540.00

16.22 F & I 24 in. x 24 in. recessed fluorescent light fixture and wiring ea 25 $260.00 $6,500.00

16.23 F & I 24 in. x 48 in. recessed fluorescent light fixture with wiring ea 25 $280.00 $7,000.00

16.24 Install Gov't furnished lighting fixture ea 50 $86.15 $4,307.56

16.25 F&I exit sign (match building standard) ea 5 $247.17 $1,235.85 F & I conduit (EMT or wiremold) per 10 ft. lengths beyond initial 50 ft. length :

16.26.1 3/4 in. conduit or #500 wiremold lf 1,000 $4.90 $4,900.00

16.26.2 1 in. conduit or #700 wiremold lf 50 $5.93 $296.50

16.26.3 2 in. conduit or #3000 wiremold lf 50 $7.10 $355.00

16.26.4 3 in. conduit lf 50 $8.20 $410.00

16.26.5 4 in. conduit lf 50 $9.20 $460.00 F & I single conductor :

16.27.1 # 12 lf 3,000 $0.52 $1,560.00

16.27.2 # 10 lf 150 $0.62 $93.00

16.27.3 # 8 lf 150 $0.87 $130.50

16.27.4 # 6 lf 150 $0.94 $141.00

16.27.5 # 4 lf 150 $1.39 $208.50

16.27.6 # 3 lf 150 $1.57 $235.50

16.27.7 # 2 lf 150 $1.87 $280.50

16.28 F&I additional circuit breakers in exist. panel, single or double pole, up to 30 amp breaker. ea 5 $92.69 $463.44

16.29 Tie circuit into circuit breaker (breaker not included) ea 10 $43.25 $432.55

Total Value $543,071.10