B1. RFQ Q&A (WRCTC AV Solution) Updated.docx

FY25-0012388591

A/V Solution (WRCTC) – Washington National Guard Questions & Answers

Q1: As part of the scope of work, is the intent to replace the existing installed projectors in this room?

A1: Yes

Q2: Where any existing cabling can be repurposed or reutilized (in other words, where it is already going to the correct location but it’s functional usage may change with the new hardware), is it allowed to do so or is the intent to replace all existing cabling as well?

A2: You can use cabling present.

Q3: Can pictures of the WRCTC Classroom be provided to understand the environment better?

A3: See attached.

Q4: Can pictures of the front and rear projection screen that are to be reused please be provided?

A4: See attached.

Q5: What is the ceiling height in the room as I do not see that dimension detailed on the floor plan?

A5: 20 feet

Q6: What type of ceiling is in the space? (i.e. 2x2 tile, hard ceiling, other) A6: 2x2 tile

Q7: What material are the walls made of? (i.e. drywall, concrete, concrete block, other) A7: Drywall

Q8: Where is it preferred that the side displays be mounted? Where the outlets on the side of the room are detailed in the floorplan or some other location?

A8: Middle of the walls, avoiding windows. Vendor can help decide best placement.

Q9: Is there a preferred size for each of the side displays, or just whatever size display will fit between the windows on each side?

A9: Maximum size that will fit.

Q10: Would you like the side displays mounted on extendable articulating mounts to allow for added range of viewing?

A10: Yes

Q11: Can the lights on the side of the room that are located where a side display be removed and a blank plate placed over the location to allow for a display to sit flush against the wall?

A11: Yes, if the vendor needs to remove a light to mount displays that is fine.

Q12: For the two pc input sources, are they to be provided on wall plates in the front and rear of the room, or in some other location?

A12: Yes, front and rear of the room.

Q13: Are any cameras required to be supported in the system for use with solutions such as MS Teams or other web conferencing systems?

A13: Yes, cameras should be supported, but cameras are not part of the bid.

Q14: Can a complete list of existing equipment that is supposed to be reused please be provided with model numbers?

A14: The only thing that must be reused are the project screens.

Q15: How many existing ceiling speakers need to be reused and integrated into the new AV system?

A15: 12

Q16: How many table-top portable wireless microphones for students must be supported in the system? Are all of these existing, or does a new wireless microphone system need to be provided?

A16: The microphones are not part of this bid.

Q17: Where would the customer like the wireless touch panel controller mounted (i.e. wall mount, on a stand with the rack, other)?

A17: On a podium that exists in the front of the room.

Q18: Are any type of AV connections required to be supported in any of the floor boxes throughout the room?

A18: No

Q19: Would the customer like the option for wireless content sharing capability in the room?

A19: No

Q20: IF the projectors are to be replaced under the scope of work, do they need to have a native 4K resolution or simply support that resolution (for instance, through 4K enhancement on a WUXGA projector)?

A20:

Q21:

A21:

Q22:

A22:

Q23:

A23:

Q24:

A24:

Q25:

A25:

Q26:

A26: