Foreign_Disclosure_Review.pdf
PDF 134 KB Posted
- Solicitation number
- FA8212-22-R-0013-RFP
About this file
This document contains a request for proposal for structural support parts for the A-10 aircraft. The solicitation requests bids for 175 pieces including 174 production articles and 1 first article. Bids are due by April 20th and award will be made by May 19th. Qualified manufacturers holding AS9100 certification or higher can submit bids and must demonstrate qualification per the attached qualification requirements. The parts must be acquired from qualified sources to ensure safe operation of the A-10 fleet. The total value is estimated below $5 million. Foreign participation is not permitted at the prime contract level. The technical data package is available to qualified bidders through the System for Award Management portal after requesting access with the provided purchase request number.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
AIR FORCE LIFE CYCLE MANAGEMENT CENTER
HILL AIR FORCE BASE UTAH
THIS DISCLOSURE INFORMATION IS NOT RELEASABLE TO FOREIGN
NATIONALS OR THEIR REPRESENTATIVES
November 23, 2021
MEMORANDUM FOR: 429 SCMS/GUMACB
CONTRACTING OFFICER
FROM: AFLCMC/WFNH
SUBJECT: FOREIGN DISCLOSURE REVIEW, Purchase Request # FD20202200152
1. Approved for release of Unclassified Production Data to the following countries:
Australia, Austria, Belgium, Canada, Denmark, Egypt, Germany, Finland, France, Greece, Israel, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, Turkey and United Kingdom.
2. x Critical technology involved, export controlled block checked “YES”, release approved for U.S. contractors only.
3. x AMSC C: This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant government engineering activity.
4. x The award of a government contract does not negate the contractor’s responsibility to comply with export control requirements under the Arms Export Control Act (Department of State) or the Export Administration Regulations (Department of Commerce).
5. This PR is NOT Critical Technology and is releasable to the above listed Countries.
6. x Item is: SUPPORT,STRUCTURAL on the A-10.
7. x The FDO Review will be completed when the AFMC Form 191 is submitted to the FDO along with the Technical Data to be released to a Foreign Country identified in MN #1.
8. x The Contractor shall include the substance of DFAR 252.225-7048 Export-Controlled Items clause, including paragraph (e), in all subcontracts.
//Signed//
Mich Gussie Foreign Disclosure Officer
AFLCMC/WFNH
Hill AFB, Utah
File details come from the government source that posted it. Updated .