AFMC_Form_807_Quality_Requirements.pdf

RECOMMENDED QUALITY ASSURANCE PROVISIONS

AND SPECIAL INSPECTION REQUIREMENTS

1. PR / MIPR NUMBER

2. NATIONAL STOCK NUMBER

1560006054570FJ

3. POINT OF INSPECTION

SOURCE DESTINATION

X

SEE DFARS 246.402

4. POINT OF ACCEPTANCE

SOURCE DESTINATION

X

5. ITEM MANAGER / PHONE

Salas, Audrey C / 801-775-4292

6. EQUIPMENT SPEC / PHONE

Midkiff, Casey / 801-586-2585

7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS

CERTIFICATE OF CONFORMANCE

FAR 52.246-15

CONTRACT RESPONSIBILITY

FOR INSPECTION

FAR 52.246-1

STANDARD INSPECTION

FAR 52.246-2,-3,-4,-5 OR -6

AS APPLICABLE TO CONTRACT

X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

AS 9100

COMMERCIAL ITEM INSPECTION

FAR 52.212-4

OTHER (Describe in Block 8)

8. REMARKS

Shull, James DNAME: 11 FEB 2022DATE:

This item requires inspection and acceptance at source because the following criteria as required in AFMCI 23-102:

- Significant Technical Requirements to ensure configuration baseline.

- Critical production features to ensure Safety of Flight aspects of this assembly/component.

Defense Contract Management Agency (DCMA) will provide the necessary technical and administrative oversight to ensure the requirements in section 7 and the Technical Data Package (TDP) provided by the contract are complied with. Specific aircraft components perform critical functions and are essential for mission success. Therefore, the following characteristics should be considered in the evaluation by DCMA:

- Material Certifications for Heat Treat

- Non-destructive inspections to support processing in the manufacture of critical aircraft components and assemblies.

- Corrosion inhibiting applications specifications.

- Dimensional requirements to meet requirements of fit-form-function of critical aircraft components and assemblies.

Additionally, note that this NSN is classified as a Critical Safety Item (CSI). Reference Hill Air Force Base Form 462 and associated Part Reports for specific critical characteristics; these characteristics shall be used in the evaluation by DCMA.

The TDP provides the specific requirements for 'accept/reject' criteria that support the areas identified above.

8a. OZONE DEPLETING SUBSTANCES (ODS)

X STATEMENT

"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN

ONLY BE MET BY THE USE OF A CLASS I ODS."

WAIVER (SEE AF FARS 5323)

NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.

9. QUALITY PRE-AWARD SURVEY

YES NEW SOURCE

PREVIOUS SOURCEX NO

AFMC PARTICIPATION

RECOMMENDED

10. CODES

A. I&A

B. CQR

G

11. SIGNATURE OF TECHNICAL AUTHORITY

Shull, James D

ORGANIZATION / SYMBOL

416 SCMS / GUEAB

PHONE

801-775-4545 / 775-4545

DATE

11 FEB 2022

Page 1 of 1AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 11 Feb 2022