FN1313-10 SOLICITATION PARTICLEBOARD PANELS PLYWOOD VENEER AND BOAT SHAPED TOPS.pdf

1. REQUSITION NUMBER

See "Schedule B"

2. CONTRACT NO. 3.AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. SOLICITATION NUMBER

FN1313-10

6. SOLICITATION ISSUE DATE

07/15/2010

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

Tiffani Balestrini

b. TELEPHONE NUMBER (No collect calls)

570-547-1990

8. OFFER DUE DT/LOCAL TIME

08/13/2010 2:00PM

9. ISSUED BY CODE

UNICOR, FPI Central Office 320 First Street NW Washington, DC 20534

10. THIS AQUISITION IS

UNRESTRICTED

X SET ASIDE100 % FOR

X SMALL BUSINESS

SMALL DISADV.BUSINESS

8(A)

SIC:

SIZE STANDARD: 500 Emp.

11. DELIVERY FOR FOB

DESTINATION UNLESS

BLOCK IS MARKED

X SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB X RFP

16. ADMINISTERED BY CODE

UNICOR, FPI Central Office 320 First Street NW Washington, DC 20534

17a. CONTRACTOR/OFFEROR CODE 999999999 FACILITY CODE

-, DC

TELEPHONE NO. TIN:

RFQ: 6200007362

17b. CHECK IF REMITANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

18a. PAYMENT WILL BE MADE BY CODE

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

IS CHECKED SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

See Section B

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

X 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA X ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1 COPIES

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET

X FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REFERENCE __________________________________

OFFER DATED __________________. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HERIN,

ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT)

Tiffani Balestrini 570-547-1990

31c. DATE SIGNED

07/21/2010

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE

CONTRACT EXCEPT AS NOTED

32b. SIGNATURE OF AUTHORIZED GOVT. REPRESENTATIVE 32c. DATE

33. SHIP NUMBER

PARTIAL FINAL

34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

36. PAYMENT

COMPLETE PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NUMBER

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD)

39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42d. TOTAL CONTAINERS

15. DELIVER TO CODE

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1449 (10-95)

Prescribed by GSA - FAR (48 CFR) 53.212

PAGE 1 OF

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12,17,23,24 & 30

Terms

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00001 HRB0001 10,000 EA 5000027730

1/4"TX4'X8',DBL-TEMPER,HI-DEN=>60PCF

UNICOR PART NUMBER: HRB0001

HARDBOARD, 1/4"T X 4' X 8', DOUBLE

TEMPER, HIGH-DENSITY TO EQUAL OR GREATER

THAN 60 LB PER CU FT

PHYSICAL TOLERANCES: +/- 1/32", LENGTH

AND WIDTH - 0", +1/8"

DJU6200007362 PAGE 2 OF 79

Request For Quote

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00002 PRB0026 100,000 EA 5000027730

1-1/8"X5'X8'SEE-SPEC

1-1/8"X5'X8'SEE-SPEC

UNICOR PART NUMBER: PRB0026

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 3 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00003 PRB0100 80,000 EA 5000027730

3/4"X5'X8',SEE-SPEC

3/4"X5'X8',SEE-SPEC

UNICOR PART NUMBER: PRB0100

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

00004 PRB0003 1,200 EA 5000027983

5/8"X5'X8',SEE-SPEC,PARTICLEBOARD

DJU6200007362 PAGE 4 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00005 PRB0026 10,000 EA 5000027771

1-1/8"X5'X8'SEE-SPEC

1-1/8"X5'X8'SEE-SPEC

UNICOR PART NUMBER: PRB0026

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 5 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00006 PRB0092 37,500 EA 5000027771

PARTICLE-BOARD,1-1/8"X4'X8'-SEE-SPEC

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

MODULUS OF RUPTURE: 2103 PSI.

MODULUS OF ELASTICITY: 326,300 PSI.

INTERNAL BOND: 65 PSI.

HARDNESS: 500 POUNDS

SCREW HOLDING FACE: 225 POUNDS

SCREW HOLDING EDGE: 202 POUNDS

LINEAR EXPANSION: 0.35 PERCENT

DJU6200007362 PAGE 6 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00007 PRB0100 140,000 EA 5000027771

3/4"X5'X8',SEE-SPEC

3/4"X5'X8',SEE-SPEC

UNICOR PART NUMBER: PRB0100

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 7 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00008 HRB0001 6,500 EA 5000027888

1/4"TX4'X8',DBL-TEMPER,HI-DEN=>60PCF

UNICOR PART NUMBER: HRB0001

HARDBOARD, 1/4"T X 4' X 8', DOUBLE

TEMPER, HIGH-DENSITY TO EQUAL OR GREATER

THAN 60 LB PER CU FT

PHYSICAL TOLERANCES: +/- 1/32", LENGTH

AND WIDTH - 0", +1/8"

00009 PRB0107 2,500 EA 5000027888

5/8"X5'X10',SEE-SPEC

UNICOR PART NUMBER: PRB0107

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

MODULUS OF RUPTURE: 2103 PSI.

MODULUS OF ELASTICITY: 326,300 PSI.

INTERNAL BOND: 65 PSI.

HARDNESS: 500 POUNDS

SCREW HOLDING FACE: 225 POUNDS

SCREW HOLDING EDGE: 202 POUNDS

LINEAR EXPANSION: 0.35 PERCENT

00010 PRB0117 35,000 EA 5000027888

1-1/8"X5'X10',M-2

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

MODULUS OF RUPTURE: 2103 PSI.

MODULUS OF ELASTICITY: 326,300 PSI.

INTERNAL BOND: 65 PSI.

HARDNESS: 500 POUNDS

SCREW HOLDING FACE: 225 POUNDS

SCREW HOLDING EDGE: 202 POUNDS

LINEAR EXPANSION: 0.35 PERCENT

DJU6200007362 PAGE 8 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00011 PLY0073 5,500 EA 5000028002

POPLAR,3/4"X4'X8',2-2,7-PLY,PLAIN-SLICE*

VNR-CORE,TYPE-II

UNICOR PART NUMBER:PLY0073

GRADE:2 FACE AND BACK FREE FROM OPEN

DEFECTS, NO COLOR OR GRAIN MATCH;

DEFECTS ALLOWED: SMOOTH PATCHES, SOUND

KNOTS AND DISCOLORATION OR VARYING

COLORS; PLAIN SLICED, 7-PLY

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 9 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00012 PLY0174 600 EA 5000028002

MAPLE,DWR-BOTTOM-STOCK,3-PLY,1/4X4'X8'L*

GRADE A-3,UNFINISHED

UNICOR PART NUMBER:PLY0174

DESCRIPTION:MAPLE DRAWER BOTTOM STOCK

SIZE: 1/4" X 4' X 8'

3-PLY MAPLE

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 10 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00013 PLY0193 16,500 EA 5000028002

12MM-BIRCH-PLYWOOD-PRE-FINISHED/2-SIDES

DESCRIPTION:

RUSSIAN BIRCH PLYWOOD / 9-PLY / SIZE: 12MM X 60" X 60" / GRADE: B/B PRE

UNICOR PART NUMBER: PLY0193

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 11 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00014 PLY2029 14,000 EA 5000028002

1/4"X4'X8'MDF/MELAMINE-NEW-ALBANY-MAPLE*

DESCRIPTION: MDF WITH MELAMINE FACE

UNICOR PART NUMBER: PLY2029

SIZE: 1/4" X 4' X 8'

COLOR: FACE-NEW ALBANY MAPLE

BASEPAPER: 30GM INDUSTRIAL GRADE

FINISH: 4GM SMOOTH URETHANE BASED FINISH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 12 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00015 PLY2030 400 EA 5000028002

OAK,A-3,5/16"X4'X8',5-PLY,ROTARY-CUT

UNICOR PART NUMBER: PLY2030

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

00016 PLY2031 800 EA 5000028002

MAPLE,A-3,5/16"X4'X8',5-PLY,ROTARY-CUT

UNICOR PART NUMBER: PLY2031

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 13 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00017 PLY2042 400 EA 5000028002

1/4"X4'X8',CHERRY,A-3,3-PLY,INTERIOR

UNICOR PART NUMBER: PLY2042

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 14 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00018 PLY2047 1,200 EA 5000028002

1/4"X4'X8'MDF/MELAMINE,2-SIDED,N-A-M*

NEW ALBANY MAPLE

DESCRIPTION: MDF WITH MELAMINE FACE/BACK

SIZE: 1/4" X 4' X 8'

UNICOR PART NUMBER:PLY2047

COLOR:FACE-BACK NEW ALBANY MAPLE

BASEPAPER: 30GM INDUSTRIAL GRADE

FINISH:4GM SMOOTH URETHANE BASED FINISH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 15 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00019 PLY2048 1,000 EA 5000028002

WALNUT,1/4"X4'X8',A-A,MDF-CORE*

UNICOR PART NUMBER: PLY2048

DESCRIPTION;WALNUT-MDF-CORE

SIZE: 1/4" X 4' X 8'

PLYWOOD PANEL, GRADE A AMERICAN BLACK

WALNUT VENEER BOTH SIDES, WITH MDF CORE,

BOTH SIDES MUST BE SLICED

WOOD VENEERS MUST ACHIEVE A

MOISTURE CONTENT OF 5-8% PRIOR TO GLUING

INTO PLY PANEL

VENEER PLIES SHALL BE

FULL LENGTH AND SHALL BE APPLIED IN

BALANCED CONSTRUCTION FORM WITH NO PLY

JOINTS LESS THAN 1" FROM THE EDGE OF ANY

PANEL

ALL FACE VENEERS SHALL BE EDGED

GLUED FULL LENGTH VENEER STRIPS SHALL

BE A MINIMUM OF 6" WIDE.

FACE AND BACK VENEER PLYS SHALL BE NO LESS THAN

1/36" THICK

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 16 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00020 PLY8513 500 EA 5000028002

MASONITE,1/8",48"X96"

UNICOR PART NUMBER: PLY8513

MANUFACTURED ACCORDING TO HPMA HP-1 1992

ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 17 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00021 PNL0264 4,000 EA 5000028002

CHERRY/CHERRY,3/4"X 96 1/2"X 60 1/2",PRB-CORE,A-1

DESCRIPTION: CHERRY/CHERRY,3-PLY PANEL

PARTICLEBOARD CORE ***CROSS-GRAIN***

UNICOR PART NUMBER: PNL0264

SIZE: 3/4" X 96 1/2" X 60 1/2"

GRADE:A-1

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

***GRAIN TO RUN WITH 60" DIMENSION***

NO VISIBLE GLUE LINES ACCEPTED

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 18 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00022 PNL0274 1,200 EA 5000028002

CHERRY,3/4"X4'X8',A-1,7-PLY

DESCRIPTION:CHERRY/CHERRY

UNICOR PART NUMBER: PNL0274

GRADE:A-1

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

NO VISIBLE GLUE LINES ACCEPTED

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 19 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00023 PNL0275 200 EA 5000028002

CHERRY,3/4"X4'X10',A-1,7-PLY

DESCRIPTION:CHERRY/CHERRY

UNICOR PART NUMBER: PNL0275

GRADE:A-1

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

NO VISIBLE GLUE LINES ACCEPTED

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 20 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00024 PNL0835 2,750 EA 5000028002

ASH/ASH(WHITE),3/4"X4'X8',PRB,GRADE:A-1

DESCRIPTION: ASH/ASH(WHITE), GRADE:A-1

3-PLY CONSTRUCTION, PARTICLEBOARD CORE

UNICOR PART NUMBER: PNL0835

SIZE: 3/4" X 4' X 8'

GRADE: A-1, PLAIN SLICED / BOOK MATCHED, ASH/ASH

(WHITE) MINIMUM THICKNESS 1/48"

FACE: GRADE A PLAIN SLICED / BOOK

MATCHED,WHITE ASH

MINIMUM THICKNESS 1/32"

SAND: TO 180 GRIT

BACK: BALANCING SPECIES OF SIMILAR

DENSITY TO ACHIEVE BALANCE BY EQUALIZING

THE RATE OF MOISTURE ABSORBTION OR

EMMISION

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

DJU6200007362 PAGE 21 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 22 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00025 PNL0836 250 EA 5000028002

DESCRIPTION: ASH/ASH, WHITE), CROSS-GRAIN,A-1

DESCRIPTION: ASH/ASH, WHITE), CROSS-GRAIN,A-1

3-PLY CONSTRUCTION, PARTICLEBOARD CORE

UNICOR PART NUMBER: PNL0836

SIZE: 3/4"X10'X4'

GRADE: A-1, ASH/ASH (WHITE) MINIMUM THICKNESS 1/48"

NO SHOP GRADE, NO VISIBLE GLUE LINES ACCEPTED

NOTE: GRAIN TO RUN WITH 48" DIMENTION

FACE: GRADE A PLAIN SLICED / BOOK

MATCHED,WHITE ASH

MINIMUM THICKNESS 1/32"

SAND: TO 180 GRIT

BACK: BALANCING SPECIES OF SIMILAR

DENSITY TO ACHIEVE BALANCE BY EQUALIZING

THE RATE OF MOISTURE ABSORBTION OR

EMMISION

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

DJU6200007362 PAGE 23 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 24 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00026 PNL1202 7,000 EA 5000028002

1X4X8,B-B-GRADE,2-SIDED-CHERRY,PRB-CORE

1X4X8,B-B-GRADE,2-SIDED-CHERRY,PRB-CORE

SIZE: 1" X 4' X 8'

UNICOR PART NUMBER: PNL1202

GRADE: B-B

FACE: B-B,CHERRY VENEER,MINIMUM THICKNESS 1/48"

CORE: PARTICLEBOARD,MINIMUM GRADE MS

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

NO SHOP GRADE,NO SAP ON BACK

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

NO VISIBLE GLUE LINES ACCEPTED

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DJU6200007362 PAGE 25 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 26 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00027 PNL1923 110,000 EA 5000028002

DESCRIPTION: CHERRY/CHERRY, 3-PLY PANEL

DESCRIPTION: CHERRY/CHERRY, 3-PLY PANEL

PARTICLEBOARD CORE

GRADE: A-B, PLAIN SLICED BOOKMATCHED, CHERRY

UNICOR PART NUMBER: PNL1923

SIZE: 3/4" X 4' X 8'

VENEER THICKNESS 1/48"

NO SHOP GRADE, NO SAP ON BACK,

NO VISIBLE GLUE LINES ACCEPTED

BOTH SIDES WILL BE BOOK MATCHED, FULL LENGTH, PLAIN SLICED VENEER OF

LIKE SPECIES

A OR FACE SIDE SHALL HAVE SLICES NO LESS THAN 5#, B SIDE SHALL HAVE

SLICES NO LESS THAN 3#, WITH A SANDED THICKNESS OF NO LESS THAN 1/32#

VISABLE GLUE LINES, ROUGH CUT, OPEN GRAIN, OR SHALEING SHALL NOT BE

ACCEPTED

FILLED HOLES, SPLITS, JOINTS, OR POCKETS ARE NOT PERMITTED

PANELS SHALL BE PRESANDED WITH 150 GRIT ABRASIVE TO MIMIC FACTORY

OPERATIONS

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

DJU6200007362 PAGE 27 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 28 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00028 PNL1927 2,500 EA 5000028002

DESCRIPTION: CHERRY/CHERRY, 3-PLY PANEL

DESCRIPTION: CHERRY/CHERRY, 3-PLY PANEL

PRB CORE ***CROSS-GRAIN, GRAIN TO RUN WITH 4' DIMENSION***

UNICOR PART NUMBER: PNL1927

SIZE: 3/4" X 10' X 4'

GRADE: A-1

FACE/BACK: PLAIN SLICED BOOKMATCHED, CHERRY

VENEER THICKNESS: 1/48"

NO SHOP GRADE, NO SAP ON BACK

NO VISIBLE GLUE LINES ACCEPTED

PAPERBACK VENEER, BOTH SIDES WILL BE BOOK MATCHED, FULL LENGTH, PLAIN

SLICED VENEER OF LIKE SPECIES

A OR FACE SIDE SHALL HAVE SLICES NO LESS THAN 5#, B SIDE SHALL HAVE

SLICES NO LESS THAN 3#, WITH A SANDED THICKNESS OF NO LESS THAN 1/32#

VISABLE GLUE LINES, ROUGH CUT, OPEN GRAIN, OR SHALEING SHALL NOT BE

ACCEPTED

FILLED HOLES, SPLITS, JOINTS, OR POCKETS ARE NOT PERMITTED

PANELS SHALL BE PRESANDED WITH 150 GRIT ABRASIVE TO MIMIC FACTORY

OPERATIONS

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

DJU6200007362 PAGE 29 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED

WITHOUT A SIGNED CERTIFICATE OF CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 30 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00029 PNL2839 250 EA 5000028002

WALNUT/WALNUT,3/4"X4'X8',A/C,9-PLY

WALNUT/WALNUT,3/4"X4'X8',A/C,9-PLY

UNICOR PART NUMBER: PNL2839

GRADE:A/C VENEER SIZE:3/4"X4'X8'

J-GRADE INNER PLY BLACK WALNUT VENEER

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 31 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00030 PNL2875 250 EA 5000028002

WALNUT/WALNUT,3/4"X8'X4'CROSS-GRAIN

WALNUT/WALNUT,3/4"X8'X4'CROSS-GRAIN

A/C,9 PLY GRADE:A/C VENEER SIZE:3/4"X8'X4 CROSS GRAIN,

J-GRADE' INNER PLY BLACK WALNUT VENEER

UNICOR PART NUMBER: PNL2875

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 32 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

DJU6200007362 PAGE 33 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00031 PNL3173 250 EA 5000028002

DESCRIPTION: CHERRY/CHERRY, 3-PLY PANEL

DESCRIPTION: CHERRY/CHERRY, 3-PLY PANEL

PARTICLEBOARD CORE

UNICOR PART NUMBER: PNL3173

SIZE: 3/4" X 60" X 60"

GRADE: A-1

FACE/BACK: GRADE A PLAIN SLICED / BOOK

MATCHED CHERRY, MINIMUM THICKNESS 1/48"

NO SHOP GRADE, NO SAP ON BACK, NO VISIBLE GLUE LINES

ACCEPTED

PAPERBACK VENEER, BOTH SIDES WILL BE BOOK MATCHED, FULL LENGTH, PLAIN

SLICED VENEER OF LIKE SPECIES

A OR FACE SIDE SHALL HAVE SLICES NO LESS THAN 5#, B SIDE SHALL HAVE

SLICES NO LESS THAN 3#, WITH A SANDED THICKNESS OF NO LESS THAN 1/32#

VISABLE GLUE LINES, ROUGH CUT, OPEN GRAIN, OR SHALEING SHALL NOT BE

ACCEPTED

FILLED HOLES, SPLITS, JOINTS, OR POCKETS ARE NOT PERMITTED

PANELS SHALL BE PRESANDED WITH 150 GRIT ABRASIVE TO MIMIC FACTORY

OPERATIONS

MANUFACTURED ACCORDING TO HPMA HP-1 1992,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

DJU6200007362 PAGE 34 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT

BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 35 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00032 PNL3176 1,600 EA 5000028002

DESCRIPTION: CHERRY/CHERRY-BACKER,B-3, 3-PLY PANEL

DESCRIPTION: CHERRY/CHERRY-BACKER,B-3, 3-PLY PANEL

PARTICLEBOARD CORE

UNICOR PART NUMBER: PNL3176

SIZE: 1" X 3' X 10'

GRADE: B-3

FACE: GRADE B PLAIN SLICED/BOOK MATCHED, CHERRY

MINIMUM THICKNESS 1/48"

NO SHOP GRADE, NO VISIBLE GLUE LINES ACCEPTED

B SIDE SHALL HAVE SLICES NO LESS THAN 3#, WITH A SANDED THICKNESS OF NO

LESS THAN 1/32#

VISABLE GLUE LINES, ROUGH CUT, OPEN GRAIN, OR SHALEING SHALL NOT BE

ACCEPTED

FILLED HOLES, SPLITS, JOINTS, OR POCKETS ARE NOT PERMITTED

PANELS SHALL BE PRESANDED WITH 150 GRIT ABRASIVE TO MIMIC FACTORY

OPERATIONS

MANUFACTURED ACCORDING TO HPMA HP-1 1992,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT

DJU6200007362 PAGE 36 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 37 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00033 PNL3466 250 EA 5000028002

DESCRIPTION: ASH PANEL, A-3, ASH VENEER

DESCRIPTION: ASH PANEL, A-3, ASH VENEER

3-PLY CONSTRUCTION, PARTICLEBOARD CORE

UNICOR PART NUMBER: PNL3466

SIZE: 1" X 3' X 8'

GRADE: A-3

FACE: ASH, PLAIN SLICED / BOOK MATCHED

MINIMUM THICKNESS 1/48"

NO SHOP GRADE NO VISIBLE GLUE LINES ACCEPTED

BACK: PHENOLIC BACKER

FACE: GRADE A PLAIN SLICED / BOOK

MATCHED,WHITE ASH

MINIMUM THICKNESS 1/32"

SAND: TO 150 GRIT

BACK: BALANCING SPECIES OF SIMILAR

DENSITY TO ACHIEVE BALANCE BY EQUALIZING

THE RATE OF MOISTURE ABSORBTION OR

EMMISION

VENEER GLUE MUST BE COMPATIBLE

WITH WATER BASE FINISHES

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

DJU6200007362 PAGE 38 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT

BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 39 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00034 PNL5059 500 EA 5000028002

WALNUT/WALNUT,1-1/2"X4'X8',A/A,18-PLY

WALNUT/WALNUT,1-1/2"X4'X8',A/A,18-PLY

UNICOR PART NUMBER: PNL5059

GRADE:A/A VENEER SIZE:1-1/2"X4'X8'

J-GRADE INNER PLY BLACK WALNUT VENEER

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT

BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 40 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00035 PRB0026 21,000 EA 5000028002

1-1/8"X5'X8'SEE-SPEC

1-1/8"X5'X8'SEE-SPEC

UNICOR PART NUMBER: PRB0026

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 41 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00036 PRB0029 250 EA 5000028002

PARTICLE-BOARD,1-1/2"X5'X8'GRADE:M1-OR-BETTER

PARTICLE-BOARD,1-1/2"X5'X8'GRADE:M1-OR-BETTER

UNICOR PART NUMBER: PRB0029

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 42 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00037 PRB0100 4,000 EA 5000028002

3/4"X5'X8',SEE-SPEC

3/4"X5'X8',SEE-SPEC

UNICOR PART NUMBER: PRB0100

THE SPECS FOR M-2 PARTICLEBOARD ARE AS FOLLOWS:

LENGTH AND WIDTH TOLERANCE: +/-0.080INCH

THICKNESS TOLERANCE PANEL AVG. FROM SPECIFIED: +/-.008INCH

THICKNESS TOLERANCE VARIANCE FROM PANEL AVG.: 0.004INCH

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 43 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00038 VNR0002 250 EA 5000028002

PS,ASH-48X96"CUSTOM-VENEER

PS,ASH-48X96"CUSTOM-VENEER,A-GRADE

UNICOR PART NUMBER: VNR0002

VENEER SHALL BE GRADE A VENEER,PHENOLIC BACKER WITH A MIN SANDED

THICKNESS OF 1/32#

VENEER SHALL BE BOOK MATCHED, FULL LENGTH, PLAIN SLICED

SLICES SHALL BE NO LESS THAN 5# WIDE

VISABLE GLUE LINES, ROUGH CUT, OPEN GRAIN, OR SHALEING SHALL NOT BE

ACCEPTED

FILLED HOLES, SPLITS, JOINTS, OR POCKETS ARE NOT PERMITTED

SAND WITH 150 GRIT ABRASIVE TO MIMIC FACTORY OPERATIONS

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 3/32"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF VENEER MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL SHEETS OF VENEER MUST CONFORM TO ALL THE

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

THE USE OF VENEER

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED VENEER IS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

DJU6200007362 PAGE 44 OF 79

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE…