36028_FA8726-17-R-0004.pdf

SOLICITATION, OFFER AND AWARD

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

RATING

DO-A7

PAGE OF PAGES

1 135

2. CONTRACT NO. 3. SOLICITATION NO. 4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

5. DATE ISSUED

6. REQUISITION/PURCHASE NO.

FA8726-17-R-0004

7. ISSUED BY AFLCMC/HNAK CODE FA8726 8. ADDRESS OFFER TO (If other than Item 7)

AIR FORCE MATERIEL COMMAND, USAF

AFLCMC/ HANSCOM

5 EGLIN STREET, BLDG 1624

HANSCOM AFB, MA 01731-2100

MOLLY A. VANCE 781-225-4082

MOLLY.VANCE@US.AF.MIL

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder”.

SOLICITATION

9.

10. FOR

INFORMATION

CALL:

A. NAME

See Block 7

B. TELEPHONE (Include area code)

(NO COLLECT CALLS)

C. E-MAIL ADDRESS

11. TABLE OF CONTENTS

() SEC. DESCRIPTION PAGE(S) () SEC DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

A SOLICITATION/CONTRACT FORM 1 I CONTRACT CLAUSES 116

B SUPPLIES OR SERVICES AND PRICES/COSTS 2 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACH.

C DESCRIPTION/SPECS./WORK STATEMENT 105 J LIST OF ATTACHMENTS 135

D PACKAGING AND MARKING 106 PART IV - REPRESENTATIONS AND INSTRUCTIONS

E INSPECTION AND ACCEPTANCE 107 K REPRESENTATIONS, CERTIFICATIONS, K - 1

F DELIVERIES OR PERFORMANCE 108 AND OTHER STATEMENTS OF OFFERORS

G CONTRACT ADMINISTRATION DATA 113 L INSTRS, CONDS, AND NOTICES TO OFFERORS L - 1

H SPECIAL CONTRACT REQUIREMENTS 115 M EVALUATION FACTORS FOR AWARD M - 1

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within ____ ____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date of receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

10 CALENDAR DAYS

20 CALENDAR DAYS

30 CALENDAR DAYS

CALENDAR DAYS

14. ACKNOWLEDGEMENTS OF AMENDMENTS

(The offeror acknowledges receipt of amend-

AMENDMENT NO. DATE AMENDMENT NO. DATE

ments to the SOLICITATION for offerors and related documents numbered and dated:

15A. NAME

AND

CODE FACILITY 16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

ADDRESS

OF

OFFEROR

15B. TELEPHONE NO. (Include area code)

15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETI-

TION: 23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

10 U.S.C. 2304(c) ( ) 41 U.S.C. 253(c) ( )

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 33 (REV. 9-97)

PREVIOUS EDITION IS UNUSABLE Prescribed by GSA ConWrite Version 6.15.0 FAR (48 CFR) 53.21(c) Created 06 Jun 2017 4:20 PM

PART I - THE SCHEDULE

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

SECTION B FA8726-17-R-0004

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

POST AWARD CONFERENCE (3600)

0001 0 __________ Noun: POST AWARD CONFERENCE (3600)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. The Contractor shall participate in a Post Award Conference (PAC) for Data Link Enterprise (DLE) Indefinite Delivery Indefinite Quantity (IDIQ) In Accordance With (IAW) the exhibits and attachments in Section J. The contractor shall conduct and participate in a PAC for other DLE efforts IAW each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. The location of the PAC shall be specified in each individual delivery order

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. Total proposed price will be specified in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

G. Period of Performance/Delivery Date: To be specified in each individual delivery order

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

0002 0 __________ Noun: SYSTEMS ENGINEERING END ITEMS (3600)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for well-defined end items with higher TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. Ordering Period: Contract Award through 60 Months

F. Period of Performance/Delivery Date: To be specified in each individual delivery order

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

0003 0 __________ Noun: SYSTEMS ENGINEERING END ITEMS (3600)

PSC:

NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for well-defined end items with higher TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. The following will be defined in each individual delivery order:

Target Cost $_______ Target Profit $ _______ (X% of Target Cost Less Cost of Money) Target Price $_______ Ceiling Price $_______ Share Ratio $_______

C. This is a Fixed Price Incentive Firm CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

G. Period of Performance/Delivery Date: To be specified in each individual delivery

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

0004 0 __________ Noun: SYSTEMS ENGINEERING END ITEMS (3600)

PSC:

NSN: N - Not Applicable Contract type: V - COST PLUS INCENTIVE FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items with lower TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modeling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Cost Plus Incentive Fee CLIN

C. The following will be defined in each individual delivery order:

Target Cost $_______ Minimum Fee $_______ Target Fee $_______ Maximum Fee $_______ Share Ratio $_______

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

0005 0 __________ Noun: SYSTEMS ENGINEERING END ITEMS (3600)

PSC:

NSN: N - Not Applicable Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items with lower TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Cost Plus Fixed Fee CLIN

C. The following will be defined in each individual delivery order:

Estimated Cost $_______ Total Fixed Fee $_______ Total Estimated Price $_______

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

INCENTIVE PAYMENT (3600)

0006 0 __________ Noun: INCENTIVE PAYMENT (3600)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for providing delivery and/or performance incentive payments in accordance with the terms specified in the plan of each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA RIGHTS (3600)

0007 0 __________ Noun: DATA RIGHTS (3600)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is to purchase technical data, software, and firmware deliverables, to include required development tools. This does not negate the Government's rights under DFARS 227 to technical data and/or computer software documentation developed under this contract with the exclusive use of Government funds or mixed funding.

B. The pricing of additional rights will be listed in the applicable Data Rights Assertion List in each individual order. The Government may use this CLIN to purchase any or all of the items listed in each individual delivery order. The total price for this CLIN is the sum of all items. The Government may purchase a variable amount of data rights at the prices listed in each individual delivery order.

C. This is a Firm Fixed Price CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA (3600)

0008 0 __________ Noun: DATA - NSP (3600)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. The Contractor shall deliver all data In Accordance With (IAW) exhibits and attachments in Section J of each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. This CLIN is Not Separately Priced

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

TRAVEL (3600)

0009 0 __________ Noun: TRAVEL (3600)

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for Government directed travel In Accordance With (IAW) each individual delivery order and the Joint Travel Regulations on a cost reimbursable basis.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

OTHER DIRECT COSTS (ODC) (3600)

0010 0 __________ Noun: OTHER DIRECT COSTS (ODC) (3600)

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for reimbursement of Other Direct Costs (ODCs), where these costs would not be otherwise chargeable to any other CLIN. This CLIN may be included in an order at the discretion of the Contracting Officer.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3400)

0011 0 __________ Noun: SYSTEMS ENGINEERING END ITEMS (3400)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items to include: design, development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3400)

0012 0 __________ Noun: SYSTEMS ENGINEERING END ITEMS (3400)

PSC:

NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items to include: design, development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. The following will be defined in each individual delivery order:

Target Cost $_______ Target Profit $ _______ (X% of Target Cost Less Cost of Money) Target Price $_______ Ceiling Price $_______ Share Ratio $_______

C. This is a Fixed Price Incentive Firm CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

INCENTIVE PAYMENT (3400)

0013 0 __________ Noun: INCENTIVE PAYMENT (3400)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for providing delivery and/or performance incentive payments in accordance with the terms specified in the plan of each individual delivery order..

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA RIGHTS (3400)

0014 0 __________ Noun: DATA RIGHTS (3400)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is to purchase technical data, software, and firmware deliverables, to include required development tools. This does not negate the Government's rights under DFARS 227 to technical data and/or computer software documentation developed under this contract with the exclusive use of Government funds or mixed funding.

B. The pricing of additional rights will be listed in the applicable Data Rights Assertion List in each individual order. The Government may use this CLIN to purchase any or all of the items listed in each individual delivery order. The total price for this CLIN is the sum of all items. The Government may purchase a variable amount of data rights at the prices listed in each individual delivery order.

C. This is a Firm Fixed Price CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA (3400)

0015 0 __________ Noun: DATA - NSP (3400)

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. The Contractor shall deliver all data In Accordance With (IAW) exhibits and attachments in Section J of each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. This CLIN is Not Separately Priced

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

TRAVEL (3400)

0016 0 __________ Noun: TRAVEL (3400)

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for Government directed travel In Accordance With (IAW) each individual delivery order and the Joint Travel Regulations on a cost reimbursable basis.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

OTHER DIRECT COSTS (ODC) (3400)

0017 0 __________ Noun: OTHER DIRECT COSTS (ODC) (3400)

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for reimbursement of Other Direct Costs (ODCs), where these costs would not be otherwise chargeable to any other CLIN. This CLIN may be included in an order at the discretion of the Contracting Officer.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: Contract Award through 60 Months

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

POST AWARD CONFERENCE (3600)

1001 OPTION CLIN (supply) __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. The contractor shall conduct and participate in a Post Award Conference (PAC) for other DLE efforts In Accordance With (IAW) each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. The location of the PAC shall be specified in each individual delivery order

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. Total proposed price will be specified in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

H. Period of Performance/Delivery Date: To be specified in each individual delivery order

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

1002 OPTION CLIN (supply) __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for well-defined end items with higher TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

F. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

1003 OPTION CLIN (supply) __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 1

PSC:

NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for well-defined end items with higher TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and

B. The following will be defined in each individual delivery order:

Target Cost $_______ Target Profit $ _______ (X% of Target Cost Less Cost of Money) Target Price $_______ Ceiling Price $_______ Share Ratio $_______

C. This is a Fixed Price Incentive Firm CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

H. Period of Performance/Delivery Date: To be specified in each individual delivery delivery order

SYSTEMS ENGINEERING END ITEMS (3600)

1004 OPTION CLIN __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 1

PSC:

NSN: N - Not Applicable Contract type: V - COST PLUS INCENTIVE FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items with lower TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modeling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and

B. This is a Cost Plus Incentive Fee CLIN

C. The following will be defined in each individual delivery order:

Target Cost $_______ Minimum Fee $_______ Target Fee $_______ Maximum Fee $_______ Share Ratio $_______

D.Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

H. Period of Performance/Delivery Date: To be specified in each individual delivery

SYSTEMS ENGINEERING END ITEMS (3600)

1005 OPTION CLIN __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 1

PSC:

NSN: N - Not Applicable Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items with lower TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and

B. This is a Cost Plus Fixed Fee CLIN

C. The following will be defined in each individual delivery order:

Estimated Cost $_______ Total Fixed Fee $_______ Total Estimated Price $_______

D. D.Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

INCENTIVE PAYMENT (3600)

1006 OPTION CLIN (supply) __________

Noun: INCENTIVE PAYMENT (3600) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for providing delivery and/or performance incentive payments in accordance with the terms specified in the plan of each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

F. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA RIGHTS (3600)

1007 OPTION CLIN (supply) __________

Error! Objects cannot be created from editing field codes.

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is to purchase technical data, software, and firmware deliverables, to include required development tools. This does not negate the Government's rights under DFARS 227 to technical data and/or computer software documentation developed under this contract with the exclusive use of Government funds or mixed funding.

B. The pricing of additional rights will be listed in the applicable Data Rights Assertion List in each individual order. The Government may use this CLIN to purchase any or all of the items listed in each individual delivery order. The total price for this CLIN is the sum of all items. The Government may purchase a variable amount of data rights at the prices listed in each individual delivery order.

C. This is a Firm Fixed Price CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA (3600)

1008 OPTION CLIN (supply) __________

Noun: DATA - NSP (3600) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. The Contractor shall deliver all data In Accordance With (IAW) exhibits and attachments in Section J of each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. This CLIN is Not Separately Priced

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

TRAVEL (3600)

1009 OPTION CLIN __________

Noun: TRAVEL (3600) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for Government directed travel In Accordance With (IAW) each individual delivery order and the Joint Travel Regulations on a cost reimbursable basis.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

OTHER DIRECT COSTS (ODC) (3600)

1010 OPTION CLIN __________

Noun: OTHER DIRECT COSTS (ODC) (3600) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for reimbursement of Other Direct Costs (ODCs), where these costs would not be otherwise chargeable to any other CLIN. This CLIN may be included in an order at the discretion of the Contracting Officer.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3400)

1011 OPTION CLIN (supply) __________

Noun: SYSTEMS ENGINEERING END ITEMS (3400) - OPTION

YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items to include: design, development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

F. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3400)

1012 OPTION CLIN (supply) __________

Noun: SYSTEMS ENGINEERING END ITEMS (3400) - OPTION

YEAR 1

PSC:

NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items to include: design, development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. The following will be defined in each individual delivery order:

Target Cost $_______ Target Profit $ _______ (X% of Target Cost Less Cost of Money) Target Price $_______ Ceiling Price $_______ Share Ratio $_______

C. This is a Fixed Price Incentive Firm CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

INCENTIVE PAYMENT (3400)

1013 OPTION CLIN (supply) __________

Noun: INCENTIVE PAYMENT (3400) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for providing delivery and/or performance incentive payments in accordance with the terms specified in the plan of each individual delivery order..

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA RIGHTS (3400)

1014 OPTION CLIN (supply) __________

Noun: DATA RIGHTS (3400) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is to purchase technical data, software, and firmware deliverables, to include required development tools. This does not negate the Government's rights under DFARS 227 to technical data and/or computer software documentation developed under this contract with the exclusive use of Government funds or mixed funding.

B. The pricing of additional rights will be listed in the applicable Data Rights Assertion List in each individual order. The Government may use this CLIN to purchase any or all of the items listed in each individual delivery order. The total price for this CLIN is the sum of all items. The Government may purchase a variable amount of data rights at the prices listed in each individual delivery order.

C. This is a Firm Fixed Price CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

G. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA (3400)

1015 OPTION CLIN (supply) __________

Noun: DATA - NSP (3400) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. The Contractor shall deliver all data In Accordance With (IAW) exhibits and attachments in Section J of each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. This CLIN is Not Separately Priced

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

G. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

TRAVEL (3400)

1016 OPTION CLIN __________

Noun: TRAVEL (3400) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for Government directed travel In Accordance With (IAW) each individual delivery order and the Joint Travel Regulations on a cost reimbursable basis.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

OTHER DIRECT COSTS (ODC) (3400)

1017 OPTION CLIN __________

Noun: OTHER DIRECT COST (ODC) (3400) - OPTION YEAR 1

PSC:

NSN: N - Not Applicable Contract type: S - COST Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for reimbursement of Other Direct Costs (ODCs), where these costs would not be otherwise chargeable to any other CLIN. This CLIN may be included in an order at the discretion of the Contracting Officer.

B. This is a Cost Reimbursement CLIN

C. No profit or fee shall be paid on this CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the expiration of the base contract

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

POST AWARD CONFERENCE (3600)

2001 OPTION CLIN (supply) __________

Noun: POST AWARD CONFERENCE (3600) - OPTION YEAR 2

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. The contractor shall conduct and participate in a Post Award Conference (PAC) for other DLE efforts In Accordance With (IAW) each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. The location of the PAC shall be specified in each individual delivery order

D. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

E. Total proposed price will be specified in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the completion of Option Year 1

G. Ordering Period: If option is exercised the ordering period is 12 months from date of

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

2002 OPTION CLIN (supply) __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 2

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for well-defined end items with higher TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. If exercised, this CLIN will be exercised 30 days prior to the completion of the Option Year 1

F. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

2003 OPTION CLIN (supply) __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 2

PSC:

NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for well-defined end items with higher TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. The following will be defined in each individual delivery order:

Target Cost $_______ Target Profit $ _______ (X% of Target Cost Less Cost of Money) Target Price $_______ Ceiling Price $_______ Share Ratio $_______

C. This is a Fixed Price Incentive Firm CLIN

D. Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the completion of Option Year

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

H. Period of Performance/Delivery Date: To be specified in each individual delivery

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

2004 OPTION CLIN __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 2

PSC:

NSN: N - Not Applicable Contract type: V - COST PLUS INCENTIVE FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items with lower TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modeling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Cost Plus Incentive Fee CLIN

C. The following will be defined in each individual delivery order:

Target Cost $_______ Minimum Fee $_______ Target Fee $_______ Maximum Fee $_______ Share Ratio $_______

D.Inspection, Acceptance, and FOB will be destination unless otherwise stated in each individual delivery order

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the completion of Option Year

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

H. Period of Performance/Delivery Date: To be specified in each individual delivery

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

SYSTEMS ENGINEERING END ITEMS (3600)

2005 OPTION CLIN __________

Noun: SYSTEMS ENGINEERING END ITEMS (3600) - OPTION

YEAR 2

PSC:

NSN: N - Not Applicable Contract type: U - COST PLUS FIXED FEE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for end items with lower TRL levels to include: design, exploratory and advanced development engineering, modification engineering, architecture development, technology assessment, technology insertion, technology refresh, proof of concept, modelling and simulations, prototyping, demonstrations, studies and analyses, hardware/software/firmware development, software/firmware procurement, algorithm/protocol assessment and development, low-rate production, modifications and upgrade planning, special tooling and test equipment development, training, fabrication analysis, quality assurance, integration analysis, assembly, test and checkout.

B. This is a Cost Plus Fixed Fee CLIN

C. The following will be defined in each individual delivery order:

Estimated Cost $_______

E. If necessary, SubCLINs may be established in each individual delivery order

F. If exercised, this CLIN will be exercised 30 days prior to the completion of Option Year

G. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

INCENTIVE PAYMENT (3600)

2006 OPTION CLIN (supply) __________

Noun: INCENTIVE PAYMENT (3600) - OPTION YEAR 2

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is for providing delivery and/or performance incentive payments in accordance with the terms specified in the plan of each individual delivery order.

B. This is a Firm Fixed Price CLIN

C. Inspection, Acceptance, and FOB will be destination unless otherwise specified in each individual delivery order

D. If necessary, SubCLINs may be established in each individual delivery order

E. If exercised, this CLIN will be exercised 30 days prior to the completion of Option Year

F. Ordering Period: If option is exercised the ordering period is 12 months from date of exercise

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

DATA RIGHTS (3600)

2007 OPTION CLIN (supply) __________

Noun: DATA RIGHTS (3600) - OPTION YEAR 2

PSC:

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

A. This CLIN is to purchase technical data, software, and firmware deliverables, to include required development tools.