FA853217R0006.pdf

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8532-17-R-0006

X

X

6.SOLICITATION ISSUE DATE

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: 100 % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 541330

8(A) SIZE STANDARD: $15.0

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

ROUTINE

THIS IS A TOTAL SMALL BUSINESS SET-ASIDE.

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) ( ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR DAYS UNLESS OFFEROR

INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9 ABOVE, THE CONTRACTOR AGREES TO HOLD ITS

OFFERED PRICES FIRM FOR THE ITEMS SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO

THE TERMS AND CONDITIONS STATED HEREIN. *120

RATING

DO: C9

3. AWARD/EFFECTIVE DATE

FA8532

2. CONTRACT NO.

X

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Total

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14 EFT:T

SCD:B

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH OR OTHERWISE

IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Engineering Services

9.

Offers will be received at the issuing office until the date and time specified below. Late offers are subject to late proposal provisions incorporated herein. All offers are subject to provisions, representations, certifications, and specifications as are attached or incorporated by reference.

5‐JUN‐2017 3:30PM

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232‐7003.)

X

7. ISSUED BY CODE

MISSION SUPPORT GENERATION/CONTRACT, AFLCMC/WNKAA

235 BYRON ST STE 19A

BLDG 300 CML PHN 478 222 1903

ROBINS AFB GA 31098‐1670

BUYER: Steve L. Dent shea.hart@us.af.mil Phone: (478) 222‐ 1860 Fax: (000 No Collect Calls

X

1. THIS CONTRACT IS A RATED ORDER UNDER DPAS

(15 CFR 350) SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

JS

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

FOLD

FOLD FOLD

SOLICITATION NO. FA853217R0006

DUE: 5 JUN 2017 3:30 PM

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Steve L Dent

MISSION SUPPORT GENERATION/CONTRACT, AFLCMC/WNKAA

235 BYRON ST STE 19A

BLDG 300 CML PHN 478 222 1903

ROBINS AFB GA 31098‐1670

FA8532‐17‐R‐0006

PART I ‐ THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

NOTES

The MHU‐196/204 Program intends to award approximately (4) contracts at the time of award.

The Period of Performance will be 36 months from date of contract award.

The Government is not responsible for any costs incurred or associated with preparation and submission of a proposal in response to this solicitation. Each MHU‐196/204 IDIQ contract will be awarded an initial task order of $1,000.00 (as a minimum) to fulfill the minimum guarantee. The initial task order will be a post award conference telecommunication. The Government will not be responsible for any costs incurred or associated with preparation and submission of task order proposals solicited under the MHU‐196/204 IDIQ (with the exception of Government ordered changes resulting in a new proposal in an already awarded effort).

AWARDING ORDERS UNDER MULTIPLE AWARD CONTRACTS

A. All multiple award contractors shall be provided a fair opportunity to be considered for each order in excess of $3,500 pursuant to the procedures established in this note, unless the contracting officer determines that:

a. The task or delivery order should be issued on a sole source basis in the interest of economy or efficiency because it is a logical follow‐on to an order already issued under the contract, provided that all awardees were given a fair opportunity pursuant to the procedures in this clause to be considered for the original order; or

B. Unless the procedures in paragraph (A) are used for awarding individual orders, multiple award contractors will be provided a fair opportunity to be considered for each order.

a. The Government will issue a Request for Order Proposal (RFOP). Contractors will be permitted seven (7) working days to prepare and submit order proposals, unless otherwise stated in the RFOP.

b. The Government will use streamlined procedures when competing orders and will award to the contractor whose proposal represents the lowest price.

C. (Public Law 103‐355), a protest is not authorized in connection with the issuance or proposed issuance of an individual task or delivery order except for:

a. A protest on the grounds that the order increases the scope, period, or maximum value of the contract under which the order is issued.

D. For this contract, the designated task or delivery order ombudsman is Ms. Kim McDonald (kim.mcdonald@robins.af.mil), WR‐ALC/PKC, Bldg 300 West Wing, Robins AFB GA 31098‐1611). The task or delivery order ombudsman is responsible for reviewing complaints from multiple award contractors and ensuring that all of the contractors are afforded a fair opportunity to be considered for task and delivery orders in excess of $3,500, consistent with procedures in the contract. However, it is not within the designated task or delivery order contract ombudsman’s authority to prevent the issuance of an order or disturb an existing order.

E. The rules in FAR 52.215‐1(c) which apply to the submission, modification, revision, and withdrawal of proposals shall apply to the submission, modification, revision, and withdrawal of proposals for award of a task/delivery order under this IDIQ contract.

F. Attached Sample Task Orders 1 – 4 (RFP Attachments 4 – 7) are intended to be

Awardable Task Orders under this contract.

Munitions Handling Unit MHU‐196/204

ENGINEERING SERVICES

Item No.

Firm Fixed Price Quantity U/I Amount 1 LO To be Determined

CLIN ACRN ACRN Total

0001 NA

Engineering Services in accordance with the attached Performance Work Statement (PWS) dated 17 November 2016

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Quality Assurance: Standard Inspection Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ TBC 1 LO

TBC TBC

ENGINEERING SERVICES

Proposed Period of Performance

Cost Reimbursement ‐ No Fee Quantity U/I Ceiling Price 1 LO To be Determined

0002 NA

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER

TRAVEL IN SUPPORT OF CLIN 0001. TRAVEL REIMBURSED IAW FAR 31.2.

Inspection/Acceptance Report: Receiving Report Required

Quality Assurance: Standard Inspection Type / Ship To Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Delivery

+ TBC LO

TBC

Munitions Handling Unit 196/204

DATA

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

0003 NA

Contract Data Requirements List Data In Accordance with DD 1423 listed below

CDRL TITLE AUTHORITY

A001 Technical Report‐Study Services / 4.2.1 / Prototype/Preproduction development DI‐MISC‐80508B

A002 Technical Report‐Study Services / 4.2.2 / Fabrication and product integration requirements DI‐MISC‐80508B

A003 Technical Report‐Study Services / 4.2.3 / Proof‐of‐ concept test and evaluation DI‐MISC‐80508B

A004 Technical Report‐Study Services / 4.3 / Field and depot technical support requests DI‐MISC‐80508B

A005 Technical Report‐Study Services / 4.3.1 / Depot‐level engineering technical assistance requests )ETARs) DI‐MISC‐80508B

A006 Technical Report‐Study Services / 4.3.2 / Depot‐level technical support DI‐MISC‐80508B

A007 Depot Level Repair Instructions DI‐SESS‐81705

A008 Technical Report‐Study Services / 4.3.3 / MHU‐196/204 damage inspection and report DI‐MISC‐80508B

A009 Technical Report‐Study Services / 4.3.4 / Work instructions and test information/procedures report DI‐MISC‐80508B

A010 Technical Report‐Study Services / 4.3.5 / Contractor oversight and final repair inspection DI‐MISC‐80508B

A011 Technical Report‐Study Services / 4.4 / Reverse engineering DI‐MISC‐80508B

A012 Source/Vendor List DI‐MGMT‐80894A

A013 Producibility Analysis Report DI‐MGMT‐80797

A014 Technical Report‐Study Services / 4.5.1.1 / Load analysis DI‐MISC‐80508B

A015 Technical Report‐Study Services / 4.5.2 / Design stress/environment spectra development DI‐MISC‐80508B

A016 Technical Report‐Study Services / 4.5.2.1 / Performance and function sizing analyses DI‐MISC‐80508B

A017 Technical Report‐Study Services / 4.5.2.2 / Thermal/environmental analyses DI‐MISC‐80508B

A018 Technical Report‐Study Services / 4.5.2.3 / Vibration/dynamics analyses DI‐MISC‐80508B

A019 Technical Report‐Study Services / 4.5.2.4 / Design parameters and analyses DI‐MISC‐80508B

A020 Technical Report‐Study Services / 4.5.2.5 / Finite element analysis (FEA) DI‐MISC‐80508B

A021 Mathematical Model Finite Element Structure Report DI‐GDRQ‐81256B

A022 Mathematical Model Finite Element Structure Report DI‐GDRQ‐81257A

A023 Durability and Damage Tolerance (DADT) Test Report DI‐SESS‐81485A

A024 Technical Report‐Study Services / 4.5.3 / Fatigue Analysis DI‐MISC‐80508B

A025 Technical Report‐Study Services / 4.5.4 / Technology insertion and systems integration due to obsolesce DI‐MISC‐80508B

A026 Technical Report‐Study Services / 4.5.5 / Systems installation and integration DI‐MISC‐80508B

A027 Technical Report‐Study Services / 4.5.6 / Test and evaluation DI‐MISC‐80508B

A028 Technical Report‐Study Services / 4.5.7 / Test and evaluation DI‐MISC‐80508B

A029 Engineering Change Proposal (ECP) DI‐SESS‐80639D

A030 Notice of Revision (NOR) DI‐SESS‐80642D

A031 Request for Variance (RFV) DI‐SESS‐80640D

A032 Product Drawings/Models and Associated Lists DI‐SESS‐81000E/T

A033 Conference Agenda / 4.6.3a / Engineering Data Guidance Conference DI‐ADMN‐81249B

A034 Conference Minutes / 4.6.3a / Engineering Data Guidance Conference DI‐ADMN‐81250B

A035 Conference Agenda / 4.6.3b / In‐process review (IPR) of the TDP DI‐ADMN‐81249B

A036 Conference Minutes / 4.6.3b / In‐process review (IPR) of the TDP DI‐ADMN‐81250B

A037 Technical Report‐Study Services / 4.7 / Over and Above DI‐MISC‐80508B

A038 Technical Report‐Study Services / 4.8.2 / Product data DI‐MISC‐80508B

A039 Technical Report‐Study Services / 4.8.2 / Engineering data for provisioning DI‐MISC‐80508B

A040 Conference Agenda / 4.8.2a / Provisioning Guidance Conference (PGC) DI‐ADMN‐81249B

A041 Conference Minutes / 4.8.2a / Provisioning Guidance Conference (PGC) DI‐ADMN‐81250B

A042 Training Materials DI‐ILSS‐80872

A043 Technical Report‐Study Services / 4.9 / Rapid manufacturing DI‐MISC‐80508B

A044 Technical Report‐Study Services / 4.10 / Final Report DI‐MISC‐80508B

A045 Technical Report‐Study Services / 4.11.3 / Technical reviews DI‐MISC‐80508B

A046 Technical Report‐Study Services / 4.12 / Statement of work DI‐MISC‐80508B

A047 Conference Agenda / 4.16d / Meeting agendas DI‐ADMN‐81249B

A048 Conference Minutes / 4.16e / Meeting minutes DI‐ADMN‐81250B

A049 Contractor's Progress, Status, and Management Report DI‐MGMT‐80227

A050 Integrated Master Schedule (IMS) DI‐MGMT‐81861A

A051 Accident/Incident Report DI‐SAFT‐81563

A052 Programmatic Environmental Safety and Health Evaluation Plan DI‐ENVR‐81840

A053 Conference Minutes, Postaward Conference DI‐ADMN‐881250A

Inspection/Acceptance Report: Receiving Report Required

Exhibit: A Quality Assurance: Standard Inspection Type / Ship To Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

OVER & ABOVE

Quantity U/I Amount 1 LO To be Negotiated

0004 NA

Over & Above

OVER & ABOVE

In accordance with PWS paragraph 4.7.

Inspection/Acceptance Report: Receiving Report Required

Quality Assurance: Standard Inspection Type / Ship To Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

POST AWARD CONFERENCE

Quantity U/I Unit Price Amount

1 LO $1,000.0000 $1,000.00

0005 NA $1,000.00

Post Award Conference In accordance with PWS paragraph 4.11.1

Inspection/Acceptance Report: Receiving Report Required

Quality Assurance: Standard Inspection Type / Ship To Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: + TBC

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

SECTION E

INSPECTION AND ACCEPTANCE

52.246‐3 INSPECTION OF SUPPLIES‐‐COST‐REIMBURSEMENT (MAY 2001)

(IAW FAR 46.303)

(Applicable for cost‐reimbursement supplies or services furnishing supplies)

52.246-4 INSPECTION OF SERVICES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.304)

(Applicable for fixed‐price services, or supplies furnishing services over the simplified acquisition threshold)

52.246-5 INSPECTION OF SERVICES--COST-REIMBURSEMENT (APR 1984)

(IAW FAR 46.305)

(Applicable for cost‐reimbursement services, or supplies furnishing services)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed‐price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)

(IAW DFARS 246.370)

(Applicable for deliverable supplies or hardware)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) (Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at destination(s) specified herein (Final).

Item No(s): 0001, 0002, 0003, 0004, 0005

SECTION F

DELIVERIES OR PERFORMANCE

52.211-8 TIME OF DELIVERY (JUN 1997)

(IAW FAR 11.404(a)(2))

DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE ITEM.

(Applicable when the Government desires delivery by a certain time but requires delivery by a specified later time, and the delivery schedule is to be based on the date of the contract)

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1)) (Applicable for supplies, services, or research and development)

52.242-15 STOP-WORK ORDER -- ALTERNATE I (APR 1984)

(IAW FAR 42.1305(b)(2)) (Applicable for Cost‐reimbursement line items)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c)) (Applicable to fixed‐price for supplies other than commercial or modified‐commercial items)

52.247-34 F.O.B. DESTINATION (NOV 1991)

(IAW FAR 47.303-6(c))

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232‐7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step‐by‐step procedures for self‐registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web‐Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

_To be Determined at Task order level

Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand‐alone) and “Receiving Report” (stand‐alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

To be determined at Task order level (Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC TBD

Issue By DoDAAC TBD

Admin DoDAAC TBD

Inspect By DoDAAC

Ship To Code TBD

Ship From Code

Mark For Code TBD

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back‐up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e‐mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

To be Determined at Task order level (Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

To be Determined at Task order level (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866‐618‐5988.

(The above Clause/Provision has been modified.)

(Applicable when 252.232‐7003 is used and neither 232.7003(b) nor (c) apply)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

NA . 30 X TO BE CITED ON EACH ORDER $1,000.00

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

ACRN TOTAL $ 1,000.00

PART II ‐ CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991)

(IAW DFARS 201.602-70)

5352.201-9101 OMBUDSMAN (JUN 2016)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Kim McDonald at 478 222 ‐1088 , FAX 478 222 ‐1121 , email kimberly.mcdonald@us.af.mil . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330‐1060, phone number (571) 256‐2395, facsimile number (571) 256‐2431.

(Applicable to all solicitations and contracts)

52.202-1 DEFINITIONS (NOV 2013)

(IAW FAR 2.201)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (MAY 2014)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

(Applicable when noncommercial and the simplified acquisition threshold is exceeded)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

(IAW FAR 3.808(b))

(Applicable over $150,000)

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (OCT 2015)

(IAW FAR 3.1004(a)) (Applicable to solicitations and contracts exceeding $5.5 million and the period of performance is greater than 120 days, unless for the acquisition of a commercial item under Part 12 or performed entirely outside the U.S.)

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS OR

STATEMENTS--REPRESENTATION (JAN 2017)

(IAW FAR 3.909-3 (a))

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

(Applicable in all solicitations and resultant contracts other than personal services contracts with individuals)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

(Applicable when exceeding the simplified acquisition threshold (except for commercial items))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (DEC 2012)

(IAW DFARS 203.1004(a), DFARS 212.301(f)(iii)) (Applicable to solicitations and contracts when FAR 52.203‐13 is included)

252.203-7004 DISPLAY OF HOTLINE POSTERS (OCT 2016)

(IAW DFARS 203.1004(b)(2)(ii)) (Applicable to acquisitions over $5.5 million, except for commercial items)

252.203-7995 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2017-O0001)

(NOV 2016)

(IAW DARS TracKing # 2017-O0001)

(a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect.

(c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(d)(1) Use of funds appropriated (or otherwise made available) by the Continuing Appropriations Act, 2017 (Pub. L. 114‐223), or any other Act that extends to fiscal year 2017 funds the same prohibitions as contained in section 743, division E, title VII, of the Consolidated Appropriations Act, 2016 (Pub. L. 114‐113) may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause.

(2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause.

(Applicable to solicitations and contracts, including commercial under FAR part 12, that will use FY 2017 appropriations)

252.203-7997 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2016-O0003)

(OCT 2015)

(IAW DARS Tracking # 2016-O0003)

(a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect.

(c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(d) (1) Use of funds appropriated (or otherwise made available) by the Continuing Appropriations Act, 2016 (Pub. L. 114‐53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in sections 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113‐235) may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause.

(2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause.

(Applicable to solicitations and contracts, including commercial under FAR part 12, that will use FY 2016 appropriations)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (OCT 2015)

(IAW FAR 4.1403(a))

(Applicable over $30,000, unless not required to be reported in FPDS)

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016)

(IAW FAR 4.1105(b)) (Applicable to solicitations that contain the provision at 52.204‐7, and resulting contracts)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016)

(IAW FAR 4.1804(c), FAR 12.301(d)) (Applicable when there is a requirement to be registered in SAM or to have a DUNS Number)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(JUN 2016)

(IAW FAR 4.1903)

(Applicable to all solicitations and contracts, except COTs, when a contractor’s system may contain Federal contract information)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016)

(IAW DFARS 204.404-70(a)) (Applicable when the contractor will have access to or generate unclassified information that may be sensitive and inappropriate for release to the public)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR

REPORTED CYBER INCIDENT INFORMATION (OCT 2016)

(IAW DFARS 204.7304(b))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (OCT 2016)

(IAW DFARS 204.7304(c))

(Applicable to all solicitations and contracts, including commercial except when solely for commercial‐off‐the‐shelf items)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (MAY 2016)

(IAW DFARS 204.7403(c), DFARS 212.301(f)(ix))

(Applicable to solicitations and contracts that involve litigation support services when 252.204‐7014 is not included)

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470, DFARS 212.301(f)(x))

(Applicable over $1,000,000)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(OCT 2015)

(IAW FAR 9.409)

(Applicable when exceeding $35,000)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING

RESPONSIBILITY MATTERS (JUL 2013)

(IAW FAR 9.104-7(c))

(Applicable to solicitations and contracts over $550,000 and contracts where the offeror has checked “has” in paragraph (b) clause 52.209‐7)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

(Applicable to all solicitations and contracts for the acquisition of products and services (including construction) unless waived

IAW FAR 9.108‐4)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(OCT 2015)

(IAW DFARS 209.409)

(Applicable to solicitations and contracts with a value of $150,000 or more)

52.210-1 MARKET RESEARCH (APR 2011)

(IAW FAR 10.003)

(Applicable to solicitations and contracts over $5.5 million for the procurement of items other than commercial items)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

(Applicable to supplies that are not commercial items)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b)) This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232‐7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211‐7003(c) is required)

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(b), DFARS 212.301(f)(iv)) (Applicable when FAR 52.245‐1, Government Property, is used)

52.215-2 AUDIT AND RECORDS--NEGOTIATION (OCT 2010)

(IAW FAR 15.209(b)(1)) (Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h)) (Applicable when using uniform contract format that is not commercial or for construction)

52.216-7 ALLOWABLE COST AND PAYMENT (JUN 2013)

(IAW FAR 16.307(a))

(a) Invoicing.

(3) The designated payment office will make interim payments for contract financing on the _30th day

(Applicable when specifying cost‐reimbursement pricing arrangement)

52.216-11 COST CONTRACT--NO FEE (APR 1984)

(IAW FAR 16.307(e)(1)) (Applicable when specifying cost reimbursement providing no fee and not a cost‐sharing contract)

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $3,500.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor‐‐

(1) Any order for a single item in excess of $3M

(2) Any order for a combination of items in excess of $3M; or

(3) A series of orders from the same ordering office within 10 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216‐21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum‐order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 3 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-22 INDEFINITE QUANTITY (OCT 1995)

(IAW FAR 16.506(e))

(a) This is an indefinite‐quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum."

(c) Except for any limitations on quantities in the Delivery‐Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period;

provided, that the Contractor shall not be required to make any deliveries under this contact after 00‐0000 .

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from .

(Applicable to solicitations and contracts when a definite‐quantity contract, a requirements contract, or an indefinite‐quantity contract is contemplated)

52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2011)

(IAW FAR 19.508(c))

52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (NOV 2016)

(IAW FAR 19.708(a)) (Applicable when exceeding the simplified acquisition threshold, except for personal service contracts or when performance is entirely outside of the United States and its outlying areas)

(Applicable over $700,000)

(Applicable over $700,000 when contracting by negotiation and subcontracting plans are required)

(Applicable over $700,000 and when the contracting action will not be reported in the Federal Procurement Data System)

52.219-13 NOTICE OF SET-ASIDE OF ORDERS (NOV 2011)

(IAW 19.508(f)) (Applicable to solicitations and contracts if an order or orders are to be set aside for any of the small business concerns identified in 19.000(a)(3))

52.219-14 LIMITATIONS ON SUBCONTRACTING (JAN 2017)

(IAW FAR 19.508(e), FAR 19.811-3(e)) (Applicable over $150,000)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(IAW FAR 19.309(c))

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.

[Contractor to sign and date and insert authorized signer's name and title].

(Applicable in solicitations and contracts exceeding the micro‐purchase threshold when the contract will be performed in the United States or its outlying areas)

(Applicable to classified or sensitive solicitations and contracts over $700,000)

52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)

(IAW FAR 22.103-5(a), AFFARS 5322.101-1)

(IAW FAR 22.101‐1(e), Applicable when the head of the contracting activity designates programs or requirements for which it is necessary that contractors be required to notify the Government of actual or potential labor disputes that are delaying or threaten to delay the timely contract performance (see 22.103‐5(a)).

52.222-2 PAYMENT FOR OVERTIME PREMIUMS (JUL 1990)

(IAW FAR 22.103-5(b))

(a) overtime premium does not exceed ___*___

*Overtime Premium $

(Applicable to orders over $150,000 unless for operation of vessels ‐ Blank shall be completed on the individual order)

52.222-3 CONVICT LABOR (JUN 2003)

(IAW FAR 22.202)

(Applicable when performance is in the U.S., Puerto Rico, Northern Mariana Islands, American Samoa, Guam, or the U.S. Virgin Islands, unless subject to the Walsh‐Healey Public Contracts Act, purchase is from Federal Prisons Industries, Inc., or purchase is from any State prison of finished supplies that may be secured in the open market/existing stocks, as distinguished from supplies requiring special fabrication, and exceeds the micro‐purchase threshold)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015)

(IAW FAR 22.810(a)(1)) (Applicable when exceeding $10,000, except those exempted by FAR 22.807 (b) which includes those for work to be performed outside the U.S. by employees who were not recruited within the U.S.)

52.222-26 EQUAL OPPORTUNITY (SEP 2016)

(IAW FAR 22.810(e))

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1)) (Applicable when the expected value is $150,000 or more except when work is performed outside the United States by employees recruited outside the United States or the Director, Office of Federal Contract Compliance Programs, has waived, in accordance with 22.1305(b), all of the terms of the clause)

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUL 2014)

(IAW FAR 22.1408(a)) (Applicable over $15,000 except when performance of work and recruitment of workers will occur outside the United States, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island, or the agency head has waived, in accordance with 22.1403(a) or 22.1403(b) all the terms of the clause)

52.222-37 EMPLOYMENT REPORTS ON VETERANS (FEB 2016)

(IAW FAR 22.1310(b)) (Applicable when the expected value is $150,000 or more and workers were recruited within the United States)

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR

RELATIONS ACT (DEC 2010)

(IAW FAR 22.1605)

(Applicable to all solicitations and contracts except under the simplified acquisition threshold, for work performed exclusively outside the U.S., or covered in their entirety by an exemption granted by the Secretary)

52.222-50 COMBATING TRAFFICKING IN PERSONS (MAR 2015)

(IAW FAR 22.1705(a)(1))

52.222-60 PAYCHECK TRANSPARENCY (EXECUTIVE ORDER 13673) (OCT 2016)

(IAW FAR 22.2007(d)) (Applicable in solicitations if the estimated value exceeds $500,000 and resultant contracts)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS

(DEC 2010)

(IAW DFARS 222.7405)

(Applicable to contracts in excess of $1 million utilizing funds appropriated by the FY10 or subsequent DoD appropriations acts, except in contracts for the acquisition of commercial items and commercially available off‐the‐shelf items)

52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

(IAW FAR 23.505)

(Applicable when the simplified acquisition threshold is exceeded except if performance is entirely outside the U.S. and its outlying areas)

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (AUG 2011)

(IAW FAR 23.1105)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306, DFARS 212.301(f)(xxi)) (Applicable to solicitations and contracts for supplies, maintenance and repair services, or construction)

5352.223-9001 HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (NOV 2012)

(IAW AFFARS 5323.9001)

52.224-3 PRIVACY TRAINING (JAN 2017)

(IAW FAR 24.302(a)) (Applicable to all solicitations and contracts where contractor employees will have access to a system of records or personally identifiable information)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

(IAW FAR 25.1103(a)) (Applicable to supplies or services involving the furnishing of supplies unless an exception applies)

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (DEC 2016)

(IAW DFARS 225.7002-3(a), DFARS 212.301(f)(xxvii)) (Applicable when exceeding the simplified acquisition threshold for food; clothing; tents, tarpaulins or covers; cotton and other natural fiber products; woven silk or woven silk blends; spun silk yarn for cartridge cloth; synthetic fabric, coated synthetic fabric; canvas products; wool; or any item of individual equipment (FSC 8465) manufactured from or containing such fibers, yarns, fabrics, or materials; to waste and byproducts of cotton or wool used in the production of propellants and explosives)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

(IAW DFARS 225.7901-4)

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS

(SEP 2004)

(IAW DFARS 226.104)

(Applicable to supplies or services exceeding $500,000)

52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)

(IAW FAR 27.201-2(a)(1)) (Applicable except when both complete performance and delivery are outside the United States)

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT

INFRINGEMENT (DEC 2007)

(IAW FAR 27.201-2(b))

(Applicable when the simplified acquisition threshold is exceeded except when both complete performance and delivery are outside the United States unless supplies are ultimately to be shipped into one of those areas)

252.227-7013 RIGHTS IN TECHNICAL DATA--NONCOMMERCIAL ITEMS (FEB 2014)

(IAW DFARS 227.7102-4(b), DFARS 227.7103-6(a))

(e) (3) The Contractor asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following technical data should be restricted—

Technical Data to be Furnished With Restrictions*

Basis for Assertion**

Asserted Rights Category***

Name of person Asserting Restrictions****

(LIST) (LIST) (LIST) (LIST)

*If the assertion is applicable to items, components, or processes developed at private expense, identify both the data and each such item, component, or process.

**Generally, the development of an item, component, or process at private expense, either exclusively or partially, is the only basis for asserting restrictions on the Government's rights to use, release, or disclose technical data pertaining to such items, components, or processes. Indicate whether development was exclusively or partially at private expense. If development was not at private expense, enter the specific reason for asserting that the Government's rights should be restricted.

***Enter asserted rights category (e.g., government purpose license rights from a prior contract, rights in SBIR data generated under another contract, limited or government purpose rights under this or a prior contract, or specifically negotiated licenses).

****Corporation, individual, or other person, as appropriate.

Date ___________________________________ Printed Name ___________________________________ and Title ___________________________________ Signature ___________________________________

(End of identification and assertion)

(f) (2) Government purpose rights markings.

Data delivered or otherwise furnished to the Government purpose rights shall be marked as follows:

GOVERNMENT PURPOSE RIGHTS

Contract No __________________________________ Contractor Name __________________________________

Contractor Address __________________________________ Expiration Date __________________________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(2) of the Rights in Technical Data‐‐Noncommercial Items clause contained in the above identified contract. No restrictions apply after the expiration date shown above. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of Legend)

(3) Limited rights markings.

Data delivered or otherwise furnished to the Government with limited rights shall be marked with the following legend:

LIMITED RIGHTS

Contract No __________________________________ Contractor Name __________________________________ Contractor Address __________________________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(3) of the Rights in Technical Data‐‐Noncommercial Items clause contained in the above identified contract. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings. Any person, other than the Government, who has been provided access to such data must promptly notify the above name Contractor.

(End of legend)

(4) Special license rights markings.

(i) Data in which the Government's rights stem from a specifically negotiated license shall be marked with the following legend:

SPECIAL LICENSE RIGHTS

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these data are restricted by Contract No. __________ (Insert contract number)_______, License No. __________ (Insert license identifier)______. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of legend)

52.2…