Contract_Data_Requirements_List_D_Portfolio.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

CONTRACT DATA REQUIREMENTS LIST Form Approved (1 Data Item) OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions. searching existing data sources. gathering and maintaining the data needed. and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington. VA 22202-4302, and to the Office of Management and Budget. Paperwork Reduction Project (0704-0188), Washington. DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

Support Eouipment (SE) D. SYSTEM/ITEM AC/MC-130J Commando 11 E. CONTRACT/PR NO. F. CONTRACTOR Radio Frequency Countermeasures (RFCM)

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3.SUBTITLE SE Recommendation Data LOGISTICS PRODUCT DATA SUMMARIES (SERO) - Standard/Modified Hand Tools List

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

Dl-SESS-81759/T 406 SCMS/GULABB

7. DD250 REQ 9. DIST 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION STATEMENT See Block 16 REQUIRED See Block 16 See Block 16 b. COPIES 8.APPCODE 11.ASOFDATE 13. DATE OF SUBSEQUENT Final

See Block 16 SUBMISSION See Block 16 NIA a. ADDRESSEE Draft

See Block 16 Reg Re pro

16. REMARKS SE RDS

A. The Prime Provisioning Activity (PPA} is identified in Block 14. 406SCMS/GULABB 1 B. Specific Summaries to be delivered on this contract are:

(1) _X_ Support Equipment Recommendation Data (SERO) (2)_X_ Standard Modified Hand Tools List

C. Attachments:

(1 )_X_ LMI Summary Worksheet for SERDs (2)_X_ LMI Summary Worksheet for Hand Tools List (2)_X_ LMI Data Product Worksheet for SERDs/Hand Tools List

D. Block 7: Acceptance/Rejection of the Logistics Product Data will be furnished within 90 calendar days after receipt by the PPA. Method of acceptance/rejection will be in accordance with contract requirements.

HAND TOOLS E. Block 8: Approval (written) is not required. However, the data item will be reviewed and accepted/rejected based on its confirming to the requirements of 406SCMS/GULABB 1 the DID within 90 days of receipt by the requiring office.

F. Block 9: Distribution statement D applies.

G. BLKS 10, 12 and 13:

SERDs: Shall be submitted progressively as hardware/SE is analyzed, not later than thirty (30) days after requirement is known.

Standard Modified Hand Tools List: 120 Days prior to first end article delivery.

H. Data elements definitions will be in accordance with GEIA-HB-0007 A and/or other data provided at the PGC by the PPA.

J. Data delivery for SERO/Hand Tools List will be electronic/email or as specified by the requiring activity.

K. In the event SERO submittal deliveries are to be made to a secured program specific electronic site (contractor or government), a transmittal notification will be concurrently forwarded to the PPA via email.

15. TOTAL 2

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Margaret A. Gilmore 7 Feb 14

DD Form 1423-1, SEP 97 (EG) (Computer Generated) PREVIOUS EDITIONS ARE OBSOLETE Page ___ of ___ Pages

1300848989C

Underline

Text Box

FD2060-14-30015

SUPPORT EQUIPMENT SUMMARY WORKSHEET

DI-SESS-81759/T

l. SUMMARY TITLE: SUPPORT AND TEST EQUIPMENT I.I Summary Sub-title: SUPPORT EQUIPMENT RECOMMENDATION DATA

(SERD)

2. SPECIFIC INSTRUCTIONS: Identify all equipment (mobile or fixed) required to support the operation and maintenance of an end article/system. SERD required for each item of equipment (both contractor furnished and government furnished) identified as a resolution to each functional requirement.

2. I SERD shall provide:

2.1.1. Narrative descriptions of the SE requirement.

2. I .2. Administrative/identification data about the SE and the article( s) requiring support.

2. I .3. SE supersedure/deletion/distribution data.

2. I .4. Design data requirements.

2. I .5. Integrated Logistics Support (ILS) data requirements.

2.1.6. SE parametric and Unit Under Test (UUT) related information.

2.1.7. A sketch or line art drawing to clarify descriptive narrative of the SE item. All contractor furnished equipment (CFE)/nonstocklisted items will include a sketch.

2.2 Unless specified otherwise, SERD shall not be prepared for items or classes of equipment as follows:

2.2.1 Common nonpowered hand tools.

2.2.2 Housekeeping items

2.2.3 Office furniture and equipment

2.2.4 Common production tools and tooling such &.s lathes, drill presses, plating equipment, induction heaters, and powered hand tools

2.2.5 Facility installation equipment

2.2.6 Manufacturer's equipment such as items listed above and items which are used only by the contractor

3. DATA IN SPECIFICATION: Logistics Data Product Worksheet for SE attached.

4. DATA NOT IN SPECIFICATION: To be discussed at Provisioning Guidance Conference.

5. SUMMARY LAYOUT: Contractor Provided

STANDARD/MODIFIED HAND TOOLS LIST SUMMARY WORKSHEET

DI-SESS-81759ff

I. SUMMARY TITLE: LOGISTICS PRODUCT DA TA SUMMARIES

l. I Summary Sub-Title: ST AND ARD/MODIFIED HAND TOOLS LIST

2. SPECIFIC INSTRUCTIONS: Identify and prepare a list of standard hand tools (powered and non-powered) normally available in standard sizes, including those that due to their application require some modifications or required to be specific type.

2.1 2.1.I 2.1.2

2.1 .3

2.1 .4 2.1.5 2.1.6 2.1.7 2.1.8 2.1.9

Standard Modified Hand Tool List shall provide:

Item Name Description (Including Dimensions) Part Number

CAGE

National Stock Number Sub-System Application Level of Maintenance Recommended Quantity Per Level of Maintenance Model Designation Applicability

2.2 The listing should be in two sections: Section l, for standard hand tools, and Section 2, for those requiring rework.

2.3 Revisions to Hand Tools List shall include a section for supersedure/deletion data.

2.4 A sketch or line art drawing of new/modified hand tools is required as part of the list.

2.5 If a particular vendor's item is required when similar items are available from other vendors, provide the reason the item must be reworked.

2.6 Special effort for generation of data shall be limited to those elements of data peculiar to any given report format.

3. DATA IN LMI SPECIFICATION: Data Product Worksheet for Standard Modified Hand Tools List attached.

4. DATA NOT IN LMI SPECIFICATION: To be discussed at Provisioning Guidance Conference.

5. SUMMARY LAYOUT: Contractor Provided.

Atch 2 to DD 1423 for DI-ALSS-81530ff

ST AND ARD/MODIFIED HAND TOOLS LIST

DD Fonn 1423-1, SEP 97 (EG) (Computer Generated) PREVIOUS EDITIONS ARE OBSOLETE Page_ of __ Pages

LMI DATA PRODUCT WORKSHEET

Dl-ALSS-81530fT FOR SUPPORT EQUIPMENT/STANDARD/MODIFIED HANDTOOLS

A B c

1 DATA PRODUCT TITLE HAND TOOL SERO

2 ALLOWANCE ITEM CODE x 3 ALLOWANCE ITEM QUANTITY x 4 AUTOMATIC DATA PROCESSING EQUIPMENT CODE (ADPE) x 5 BASIS OF ISSUE (801) x 6 CALIBRATION AND MEASUREMENT REQUIREMENTS SUMMARY RECOMMENDED x 7 CAL/BRA TION INTERVAL x 8 CALIBRATION ITEM x 9 CAL/BRAT/ON PROCEDURE x 10 CALIBRATION REQUIRED x 11 CALIBRATION TIME x 12 COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE x x 13 CONTRACTOR FURNISHED EQUIPMENT/GOVERNMENT FURNISHED EQUIPMENT x 14 CONTRACTOR RECOMMENDED x 15 CONTRACTOR TECHNICAL INFORMATION CODE (CTIC) x x 16 DEMILITARIZATION CODE (DMIL) x 17 DESCRIPTION/FUNCTION AND CHARACTERISTICS OF SUPPORT EQUIPMENT x x 18 DESIGN DATA CATEGORY CODE x 19 DESIGN DATA PRICE x 20 END ITEM ACRONYM CODE (EIAC) x 21 ESTIMATED PRICE x x 22 FUNCTIONAL ANAL YS/S x 23 HARDWARE DEVELOPMENT PRICE x 24 INPUT POWER SOURCE x 25 INSTALLATION FACTORS OR OTHER FACILITIES x 26 INTEGRATED LOGISTIC SUPPORT (/LS) PRICE x 27 /LS REQUIREMENTS CATEGORY CODE x 28 INTERCHANGEABILITY CODE (IC) x 29 ITEM CATEGORY CODE (ICC) x 30 ITEM DESIGNATOR CODE x x 31 ITEM NAME x x 32 LINE REPLACEABLE UNIT x 33 MEAN TIME BETWEEN FAILURES (MTBF) x 34 MEAN TIME TO REPAIR (MTTR) x 35 MEASUREMENT BASE-MTBF x 36 MOBILE FACILITY CODE x 37 NATIONAL STOCK NUMBER AND RELATED DATA x x 38 PARAMETERS x 39 PASS THROUGH PRICE x 40 PRECIOUS METAL INDICATOR CODE (PMIC) x 41 PREPARING ACTIVITY x 42 PRODUCTION LEAD TIME (PL T) x x 43 QUANTITY PER TEST x 44 RECURRING COST x 45 REFERENCE NUMBER x x 46 REFERENCE NUMBER CATEGORY CODE (RNCC) x 47 REFERENCE NUMBER VARIATION CODE (RNVC) x 48 REVISION x -- 49 SERVICE DESIGNATOR CODE (SER) x

50 SKILL SPECIAL TY CODE FOR SE OPERATOR x

51 SOURCE MAINTENANCE AND RECOVERABILITY CODE-SE x x

52 SE DIMENSIONS - OPERATING/SHIPPING/STORAGE x 53 SE EXPLANATIONS x

54 SE RECOMMENDATION DATA NUMBER (SERO NUMBER) x 55 SE RECOMMENDATION DATA NUMBER REV/SUPERSEDE REMARKS x 56 SE WEIGHT - OPERATING/SHIPPING/STORAGE x - 57 TEST ACCURACY RATIO (TAR) x

----- -y-- ------~--

TOTAL QUANTITY RECOMMENDED

59 TYPE EQUIPMENT CODE x 60 ~--~~~---~------------------- ----····---~--------------------~------·-·- ------~------~-- !---------------~-----

UNIT OF ISSUE/UNIT OF MEASURE PRICE (U//UM PRICE) x

Atch 3 to DD 1423 for Dl-ALSS-81530fT

DD Form 1423·1, SEP 97(EG) (Computer Generated) PREVIOUS EDITIONS ARE OBSOLETE Page __ of_Pages

Text20: D

Text21: D001

Text22: SOW para 3.1.17.3.1

Text23: 28 Feb 14

Text24: 8 Oct 14

2014-02-28T08:38:15-0500

GILMORE.MARGARET.A.1065227483

2014-10-08T15:57:34-0400

SLYFIELD.MICHAEL.S.1042079746

Text27: 1

Text28: 4

Text29: Page 2 of 4 Pages

Text30: 3

Text31: 4

Text32: 4

Text33: 4

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget. Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. 8. EXHIBIT C. CATEGORY

D.SYSTEM/ITEM AC/MC-130J Commando II E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

Engineering Data for Provisioning (EDFP)

Dl-SESS-8187 4 406 SCMS/GULABB

7. DD250 REQ 9. DIST 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

STATEMENT

See Block 16 REQUIRED As Required IAWAFMC Form 718 b. COPIES 8.APPCODE 11.ASOFDATE 13. DATE OF SUBSEQUENT Final

As Required Reg Repro

16. REMARKS IF ROUTINE MAIL:

A The Prime Provisioning Activity (PPA) is identified in Block 14 with an asterisk (*). 406SCMS/GULABB *1 B. For PPLs/SFPPLs, one set of technical data (hard copy) will be provided to the PPA with the Logistics Product Data in PLISN sequence, annotated with PLISN, PCCN, SCC, PCC, CAGE and 235 Byron St.

Part Number, with accompanying transmittal correspondence. Suite 19A C. For PPLs/SFPPLs, one set of technical data (electronic or hard copy) will be provided to DUS (** Block 14), annotated with PLISN, PCCN, sec. PCC, CAGE, and PIN, with accompanying Robins AFB, GA transmittal correspondence (with a courtesy copy provided to the PPA)

31098-1670 D. All transmittal correspondence will cite the applicable Contract Number, PCCN, and SCC. DLIS transmittal correspondence should cite 406SCMS/GULABB as the PPA and provide a courtesy copy to the PPA E. Block 7: Acceptance/Rejection of the technical data will be furnished within 90 calendar days after IF PRVT CARRIER:

receipt by the PPA Method of acceptance/rejection will be in accordance with contract

638 Supply Chain *1 requirements.

F. Block 8: Approval (written) is not required. However, the data item will be reviewed and Management Group accepted/rejected based on its conforming to the requirements of the DID within 90 days of receipt

406SCMS/GULABB by the requiring office.

G. Block 9: Distribution statement D applies. 235 Byron St.

H. Blocks 10, 12, & 13: Date(s) to be reflected on the AFMC Form 718 (Atch 1 to the Initial Provisioning Performance Specification (!PPS)). If complete sets are not provided, identify missing Suite 19A technical data and provide it 30 days prior to the Spares Provisioning Conference or as directed by

Robins AFB, GA the PPA This applies to all non stock-listed items regardless of the type Logistics Product Data and SMR Code (source, maintenance, recoverability). Technical data is required for each support item 31098-1670 appearing on all types of Logistics Product Data, first appearance only on each Logistics Product Data submission, unless directed otherwise by the PPA.

I. The prime contractor and all sub-vendors shall provide required data, translated to the English

IF HARD COPY: language, for the express purpose of identifying and cataloging items with a full description regardless of limited rights claims. Letters of refusal must clearly state reason(s) technical data is DLIS-KPD PSO **1 not being furnished to satisfy the data requirements levied and recommend alternate methods of furnishing required technical data to the PPA. 74 Washington Ave., J. For DCNs, LL TILs, and CBILs, both sets of technical data will be provided to the PPA. N, Suite 7 K. The contractor shall not assess developmental costs to the Government to furnish this technical data as SDFP, only cost necessary for reproduction and assemblage. Battle Creek, Ml L. In the event SDFP submittal deliveries are to be made to a secured program specific electronic

49037-3084 site (contractor or government), a transmittal notification will be concurrently forwarded to the PPA via email. IF ELECTRONIC:

DLISPSO@dla.mil 1

15. TOTAL 2

G. PREPARED BY I. APPROVED BY J. DATE

DD Form 1423-1, SEP 97 (EG) (Computer Generated) PREVIOUS EDITIONS ARE OBSOLETE Page ____ of ___ Pages

FD2060-14-30015

Text13: D002

Text14: 28 Feb 14

Text15: 8 Oct 14

2014-10-08T15:59:06-0400

SLYFIELD.MICHAEL.S.1042079746

2014-02-28T08:39:42-0500

GILMORE.MARGARET.A.1065227483

Text18: 3.1.17.3.1 & 3.1.17.4.2

Text19: D

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

Page of Pages

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

data_item: D003 title: Supplementary Provisioning Technical Documentation sub: See Block 16 auth: DI-SESS-81716/T ref: SOW para 3.1.17.3.1 & 3.1.17.4.2 req_ofc: AFLCMC/WNYCA dd250: LT appcode: A dist: D freq: See Blk 16 asof: See Blk 16 firstsub: See Blk 16 subsub: See Blk 16 addressee1: AFLCMC/WNYCA draft1:

reg1:

repro1:

addressee2: 280 Byron Street draft2:

reg2:

repro2:

addressee3: Bldg 229 draft3:

reg3:

repro3:

addressee4: RAFB, GA 31098 draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6: IF PRVT CARRIER:

draft6:

reg6:

repro6:

addressee7: 638 Supply Chain draft7:

reg7: 1 repro7:

addressee8: Management Group draft8:

reg8:

repro8:

addressee9: 406 SCMS/GULABB draft9:

reg9:

repro9:

addressee10: 2235 Byron Street draft10:

reg10:

repro10:

addressee11: Suite 19A draft11:

reg11:

repro11:

addressee12: RAFB, GA 31098-1670 draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14: IF ROUTINE MAIl:

draft14:

reg14:

repro14:

addressee15: 406 SCMC/GULABB draft15:

reg15: 1 repro15:

addressee16: 235 Byron Street draft16:

reg16:

repro16:

addressee17: Suite 19A draft17:

reg17:

repro17:

addressee18: RAFB, GA 31098-1670 draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20: IF HARD COPY:

draft20:

reg20:

repro20:

addressee21: DLIS-KPD PSO draft21:

reg21: 1 repro21:

addressee22: 74 Washington Ave.

draft22:

reg22:

repro22:

addressee23: N. Suite 7 draft23:

reg23:

repro23:

addressee24: Battle Creek, MI draft24:

reg24:

repro24:

addressee25: 49037-3084 draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27: IF ELECTRONIC draft27:

reg27:

repro27:

addressee28: DLISPSO@dla.mil draft28:

reg28: 1 repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30: AFLCMC/WISM draft30:

reg30: 1 repro30:

addressee31: (See CDRL Notes) draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_reg: 5 total_repro: 0 remarks: Block 3: Subtitles Peculiar Support Equipment para 3.1.17.3.1 Provisioning para 3.1.17.4.2

Block 4 and 14: Documents shall be written using the Microsoft Office product suite and /or Microsoft Project Tools. Contractor format shall comply with provisioning data requirements.

Blocks 10, 11, 12, and 13: Submit this data along with all other provisioning data as requested/required by the Provisioning Office.

group:

total_price:

prep_name: Regina Morrison line_item:

exhibit: D xtdp: Off xtm: Off othercat: X system: Commando II RFCM ctr_no: FD2060-14-30015 contr:

remarksb:

Page2:

Reset:

2014-09-26T10:13:55-0400

MASON.SUZANNE.D.1229958832

prep_date: 9/20/2014 app_by: Michael Slyfield AFLCMC/WNYBBB

2014-10-08T16:02:38-0400

SLYFIELD.MICHAEL.S.1042079746

app_date: 8 Oct 14

Page: 1 of_pages: 1 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: D004 title: Maintenance Test and Support Equipment List sub:

auth: DI-SESS-80294B ref: SOW para 3.1.17.3.3 req_ofc: AFLCMC/WNYCA dd250: DD appcode: A dist: D freq: See Blk 16 asof: See Blk 16 firstsub: See Blk 16 subsub: See Blk 16 addressee1: AFLCMC/WISM draft1: 1 reg1: 1 repro1:

addressee2: (See CDRL Notes) draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: Blocks 10, 11, 12, and 13: Blocks 8, 10, 11, 12, and 13: Initial draft shall be submitted at CDR. Final draft shall be submitted 90 days after Post Award Technical Interchange Meeting. Government comments/approval will be provided within 30 days after receipt of each submittal. The Contractor shall resubmit within 30 days after receipt of comments/disapproval. Submit final within 30 days after Government approval.

”NOTE: FOR ADDITIONAL INSTRUCTIONS SEE EXHIBIT CDRL NOTES"

group:

total_price:

prep_name: Regina Morrison line_item:

exhibit: D xtdp: Yes xtm: Off othercat:

system: Commando II RFCM ctr_no: FD2060-14-30015 contr:

remarksb:

Page2: 2

Reset:

2014-09-26T10:14:36-0400

MASON.SUZANNE.D.1229958832

prep_date: 9/20/2014 app_by: Michael Slyfield AFLCMC/WNYBBB

2014-10-08T16:03:46-0400

SLYFIELD.MICHAEL.S.1042079746

app_date: 8 Oct 14

Page: 1 of_pages: 1 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: D005 title: Logistics Management Information (LMI) Summaries sub: See Block 16 auth: DI-ALSS-81530 ref: SOW para 3.1.17.4.1 & 3.1.17.4.2 req_ofc: AFLCMC/WNYCA dd250: LT appcode: A dist: D freq: See Blk 16 asof: See Blk 16 firstsub: See Blk 16 subsub: See Blk 16 addressee1: AFLCMC/WISM draft1: 1 reg1: 1 repro1:

addressee2: (See CDRL Notes) draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: Block 3: Subtitles Integrated Logistics Support Management para 3.1.17.4.1 Provisioning para 3.1.17.4.2

Blocks 10, 11, 12, and 13: Initial submission is due 15 months prior to Trial Kit Install on Aircraft or initial DT Field Testing, whichever is earlier. Final submission is due 12 months prior to contractual obligations for operational procurement. Government shall provide comments/approval within 30 days after receipt of report. Contractor shall resubmit within 30 days after receipt of comments/approval.

”NOTE: FOR ADDITIONAL INSTRUCTIONS SEE EXHIBIT CDRL NOTES"

group:

total_price:

prep_name: Regina Morrison line_item:

exhibit: D xtdp: Off xtm: Off othercat: X system: Commando II RFCM ctr_no: FD2060-14-30015 contr:

remarksb:

Page2:

Reset:

2014-09-26T10:15:21-0400

MASON.SUZANNE.D.1229958832

prep_date: 9/20/2014 app_by: Michael Slyfield AFLCMC/WNYBBB

2014-10-08T16:05:12-0400

SLYFIELD.MICHAEL.S.1042079746

app_date: 8 Oct 14

Page: 1 of_pages: 1 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: D006 title: Level of Repair Analysis (LORA) Report sub:

auth: DI-ILSS-80655 ref: SOW para 5.2.1 req_ofc: AFLCMC/WNYEAB dd250: LT appcode: A dist: D freq: See Blk 16 asof: See Blk 16 firstsub: See Blk 16 subsub: See Blk 16 addressee1: AFLCMC/WISM draft1: 1 reg1: 1 repro1:

addressee2: (See CDRL Notes) draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: Blocks 8, 10, 11, 12, and 13: Draft shall be submitted NLT 30 days after CDR. The Government will provide approval or disapproval/comments within 30 days of receipt of each submission. The Contractor shall revise and resubmit within 30 days of receipt of disapproval/comments receipt. Submit final within 14 days of Government approval.

”NOTE: FOR ADDITIONAL INSTRUCTIONS SEE EXHIBIT CDRL NOTES"

group:

total_price:

prep_name: Regina Morrison line_item:

exhibit: D xtdp: Off xtm: Off othercat: X system: Commando II RFCM ctr_no: FD2060-14-30015 contr:

remarksb:

Page2: 2

Reset:

2014-09-26T10:16:26-0400

MASON.SUZANNE.D.1229958832

prep_date: 9/20/2014 app_by: Michael Slyfield AFLCMC/WNYBBB

2014-10-08T16:06:15-0400

SLYFIELD.MICHAEL.S.1042079746

app_date: 8 Oct 14

Page: 1 of_pages: 1 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: D007 title: Test Requirements Document (TRD) sub:

auth: DI-ATTS-80041A ref: SOW para 3.2.7 req_ofc: AFLCMC/WNYEAB dd250: LT appcode: A dist: D freq: See Blk 16 asof: See Blk 16 firstsub: See Blk 16 subsub: See Blk 16 addressee1: AFLCMC/WISM draft1: 1 reg1: 1 repro1:

addressee2: (See CDRL Notes) draft2:

reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_reg: 1 total_repro: 0 remarks: Blocks 10, 11, 12, and 13: Draft shall be submitted NLT 120 days after award of Option 7. Government comments will be provided within 30 days after receipt. The contractor shall resubmit within 30 days after receipt of Government comments/approval. Submit final within 14 days of Government approval.

”NOTE: FOR ADDITIONAL INSTRUCTIONS SEE EXHIBIT CDRL NOTES"

group:

total_price:

prep_name: Regina Morrison line_item:

exhibit: D xtdp: Off xtm: Off othercat: X system: Commando II RFCM ctr_no: FD2060-14-30015 contr:

remarksb:

Page2:

Reset:

2014-09-26T10:17:04-0400

MASON.SUZANNE.D.1229958832

prep_date: 9/20/2014 app_by: Michael Slyfield AFLCMC/WNYBBB

2014-10-08T16:07:24-0400

SLYFIELD.MICHAEL.S.1042079746

app_date: 8 Oct 14

Page: 1 of_pages: 1 app: Adobe Professional 8.0

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: D008 title: Commercial Off-The-Shelf (COTS) Manuals and Associated Supplemental Data sub:

auth: DI-TMSS-80527C ref: SOW para 3.4 req_ofc: AFLCMC/WNYEAB dd250: DD appcode: N/A dist: A freq: 1 TIME asof: N/A firstsub: See Blk 16 subsub: N/A addressee1: AFLCMC/WISM draft1:

reg1: 1 repro1: 1 addressee2: 1895 5th St, Bldg 46 draft2:

reg2:

repro2:

addressee3: Wright-Patterson AFB draft3:

reg3:

repro3:

addressee4: OH 45433-7200 draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6: Electronic Delivery:

draft6:

reg6: 1 repro6: 1 addressee7: talon.configmgt@ draft7:

reg7:

repro7:

addressee8: us.af.mil draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_reg: 2 total_repro: 2 remarks: Block 6: RFCM data shall be approved by the following offices.

Blocks 12: Deliver data concurrently with RFCM SIL hardware delivery. Government comments/disapproval or approval will be provided within 30 days after receipt of submittal. The Contractor shall resubmit within 30 days after receipt of Government comments/disapproval.

”NOTE: FOR ADDITIONAL INSTRUCTIONS SEE EXHIBIT CDRL NOTES"

group:

total_price:

prep_name: Regina Morrison line_item:

exhibit: D xtdp: Yes xtm: Off othercat:

system: Commando II RFCM ctr_no: FD2060-14-30015 contr:

remarksb:

Page2:

Reset:

2014-09-26T10:18:02-0400

MASON.SUZANNE.D.1229958832

prep_date: 9/20/2014 app_by: Michael Slyfield AFLCMC/WNYBBB

2014-10-08T16:09:02-0400

SLYFIELD.MICHAEL.S.1042079746

app_date: 8 Oct 14

Page: 1 of_pages: 1 app: Adobe Professional 8.0

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

c D. SYSTEM/ITEM AC/MC-130J Commando II E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3.SUBTITLE

LOGISTICS PRODUCT DATA

Dl-SESS-81758/T SOW PARA -- ~06 SCMS/GULABB

7. DD250 REQ 9. DIST 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

STATEMENT

See Block 16 REQUIRED As Required IAWAFMC Form 718 b. COPIES 8.APPCODE 11. AS OF DATE 13. DATE OF SUBSEQUENT Final

As Required Reg Repro

16. REMARKS. 406 SCMS/GULABB 1 0

A. The Prime Provisioning Activity (PPA) is identified in Block 14. 235 Byron St.

B. Specific summaries to be delivered on this contract are: Suite 19A (1)_X_Provisioning Parts List (PPL) Top Down Sequence

Robins AFB GA (2)_X_Design Change Notices (DCN) (3)_X_Statement of Prior Submission (SPS) Hard Copy Only. 31098-1670

C. Attachment: LMI Data Product Worksheet for Logistics Product Data.

D. Block 7: Acceptance/Rejection of the Logistics Product Data will be furnished within 90 calendar days after receipt by the PPA. Method of acceptance/rejection will be in accordance with contract requirements.

E. Block 8: Approval (written) is not required. However, the data item will be reviewed and accepted/rejected based on its conforming to the requirements of the DID within 90 days of receipt by the requiring office.

F. Block 9: Distribution statement D applies.

G. Blocks 10, 11, 12, & 13:

(1) PPL: Date(s) to be reflected on the AFMC Form 718 (Atch 1 to the Initial Provisioning Performance Specification (I PPS)). See Paragraph 3. 1 of the IPPS.

(2) DCN(s): See Paragraph 10 of the IPPS.

(3) SPS: When the !PPS is provided with the solicitation, an offerer's SPS shall be as outlined by the solicitation. When the !PPS is furnished after award, the contractor shall furnish a SPS within thirty (30) days after receipt of the IPPS. See Paragraph 7 of the IPPS.

H. Logistics Product Data transmittal document will reflect, as a minimum, PCCN, SCC, PCC, Contract Number, Type Logistics Product Data, and Line Item Count.

I. Data element definitions will be in accordance with GEIA-HB-0007A and/or other data provided at the PGC by the PPA.

J. In the event Logistics Product Data submittal deliveries are to be made to a secured program specific electronic site (contractor or government), a transmittal notification will be concurrently forwarded to the PPA via email.

15. TOTAL 1 0

DD Form 1423-1, SEP 97 (EG) (Computer Generated) PREVIOUS EDITIONS ARE OBSO/,ETE Page ____ of ___ Pages

FD2060-14-R-30015

D

LOGISTICS DATA PRODUCTS WORKSHEET

1. SUMMARY TITLE: Logistics Data Products

2. SPECIFIC INSTRUCTIONS: Types of Logistics Data Products which may be required are listed below and will be specified on the Contract Data Requirement List (CORL) for Dl-SESS-81758ff.

2.1. PROVISIONING PARTS LIST (PPL): Defined as Hardware Breakdown.

2.1.1. PPL will also include all repairable contractor off the-shelf (COTS) items as a one line entry unless excluded by the PPA.

2.1.2. PPL will not include a breakdown of government furnished equipment unless specified otherwise by the PPA, but shall be listed as a one line entry on the PPL.

2.2. COMMON AND BULK ITEMS LIST: Hardware items such as common nuts, bolts, screws, keys, washers, and fittings, except those of special design. The CBIL can also contain bulk items such as electrical wire and cable, gasket material, tubing, hose, adhesives, paints, oil, grease, solvents, and metal stock (such as rods and sheets). WHEN THE PPL IS A REQUIREMENT, ALL HARDWARE ITEMS WILL

APPEAR ON THE PPL, NOT ON THE CBIL.

2.3. DESIGN CHANGE NOTICE (DCN): Identify changes to Logistics Data Products which add to, delete, supersede, or modify items previously listed which are approved for incorporation into the end item, which result from an engineering change requiring approval by a configuration authority. Administrative Change Notices (ACNs) are changes that do not result from an engineering change (ex. typo, additional source, etc.).

2.4. LONG LEAD TIME ITEMS LIST (LL TIL): List of those items which, due to their complexity of design, complicated manufacturing process or limited production, require early ordering to ensure adequate delivery schedules.

2.5. SHORT FORM PROVISIONING PARTS LIST (SFPPL): Identify only those support items recommended for maintenance of the end item, component or assembly.

2.6. STATEMENT OF PRIOR SUBMISSION (SPS}: Certify that the

contractor/subcontractor has previously furnished the Government Logistics Data Products which may satisfy the Logistics Data Products requirements of this contract.

3. DATA IN LMI SPECIFICATION: Refer to Initial Provisioning Performance Specification (IPPS), LMI Data Product Selection Sheet (Atch 2).

4. DATA NOT IN LMI SPECIFICATION: Refer to IPPS, Atch 2 Notes.

5. SUMMARY LAYOUT: Government Provided. Refer to IPPS, Atch 3.

Text1: 3.1.17.3.1

Text3: DI-SESS-81757A/T

Text4: D009

Text6: 1

Text7: 2

Text8: Page 2 of 2 Pages

2014-10-08T16:15:21-0400

SLYFIELD.MICHAEL.S.1042079746

Text10: 8 Oct 14

Text11: 28 Feb 14

Text12:

2014-02-28T08:39:00-0500

GILMORE.MARGARET.A.1065227483