ATTACHMENT_2.pdf

RFP ATTACHMENT 2

Cross Reference Matrix

Utilizing MIL-HDBK-245D, Handbook for the Preparation of Statement of Work, the following matrix is intended to reduce internal RFP inconsistencies and aid in proposal preparation. It is provided as a reference tool for information only. In the event of conflict between this matrix and any other section of the RFP, the other section shall take precedence. The offeror shall provide a Cross Reference Matrix that identifies Proposal Volume and Paragraph reference(s) for each Subfactor/Element identified below.

Initial Source Selection, RFCM System Design Subfactor/Element System Requirements

Document (SRD) Statement of Work

(SOW)

Other Proposal

Reference Subfactor One Receiver and Transmitter Capability

Element One –System Architecture Element Two –Receiver Capability 3.3.2 and its subsections;

3.3.4.1; 3.3.4.3 (specifically

SRD_767)

Element Three –Transmitter Capability 3.3.3 and its subsections;

3.3.4.2; 3.3.4.3 (specifically

SRD_873)

Subfactor Two Starting Technology Foundation and Estimated Design Changes

3.6 and its subsections Table 1; Table 2;

3.1.1; 3.1.2; 3.1.6.3;

3.1.17.4.4

Subfactor Three Aircraft Integration Element One –Installation and Non- Interference and Electromagnetic Capability

3.9.5; 3.9.6 3.1.1.3; 3.2.3.7

Element Two - Airworthiness 3.12.1 3.1.1.3.3; 3.2.3.6

Subfactor Four Sustainability 3.1.1.1; 3.1.1.2; 6;

3.1.8.1; 3.1.8.2; 3.3;

CDRLs B007, A033, A031, B006, B018;

Schedule B of the RFP, CLIN

Subfactor Five, Schedule 3.1.12.5; 3.1; 3.1.2;

3.1.5; 3.2.5; 3.4;

4.2.1.2; 3.1.15.3.5;

Schedule B of the RFP; RFP Part I section

B; RFP

Attachment 5;