WWYK260003_As Built Info.pdf

This document is a set of architectural and engineering drawings for a DO# 5250 Class Warehouse located at Tinker Air Force Base, Oklahoma, prepared by Federal Constructors Inc.

The drawings include comprehensive design plans for a military warehouse facility with the following systems and components: electrical plans showing lamp lay-in floor fixtures, emergency lighting master units, LED exits, 250W MH lighting, watt remote control heads, and outside lights; power plans depicting 2P contractor W-24V coil and 208V-24V control transformers, size "O" starters with 24V coil and 208V-24 control, CORX 10, 30A receptacles, and thermostat locations; fire protection plans indicating fire sprinkler head locations, sprinkler riser details, water motor gongs, pipe flow diagrams, and hydraulic information with system class specifications, head coverage details, design density calculations, and underground pipe sizing; gas piping and hot/cold water distribution systems; and sheet metal construction details. The site plan shows the warehouse footprint with parking areas, a 16-foot-wide drive, and building numbers 4003, 4004, and 4065. The electrical plan is scaled at 1/8 inch to 1 foot, the power plan at 1/8 inch to 1 foot, and the fire protection plan at 1/8 inch to 1 foot. Detail plans include isometric and architectural views of specific warehouse components and a gas/piping section. These technical drawings serve as the construction specification documents for the warehouse facility project.