FA8126-15-Q-0210_Q A.docx
DOCX document 18 KB Posted
- Solicitation number
- FA8126-15-Q-0210
View the file
Other files
Show all 49
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
***Please ensure to review all attachments in FBO related to the referenced solicitation***
FA8126-15-Q-0210
Vendor Questions and Answers
1) QUESTION: Is it acceptable to use a non-environmental version of the BKW series parts? Specifically on the FMMP, Bulkhead Parts List, Item 5, shows part numberBKW3E301-0056, would it be acceptable to use a BKW3D301-0056?
2) QUESTION: Also, on the FMMP, Wraparound Plate, part number 05A070W301A87, item 1, could we use BKW4D301-0056 in place of what is shown?
ANSWER for QUESTIONS 1 and 2: The parts in question are Government Furnished Property (GFP). The GFP property should be used. There is no need to use an alternate part.
3) QUESTION: Can you provide the Government Furnished Property list? SOW section 3.1 states GFP is listed in Attachment #3 Appendix B, but the attachment #3 provided is for top level PWB requirements.
ANSWER: The Government Furnished Property list is provided in the solicitation. The document is SGFP-Atch3AppB-FMMPLRUITA-111015.xlsx
4) QUESTION: Where can we find mechanical design specifications/requirements of the ITA front panel? Only a rough sketch of its front view and finish requirement was provided.
ANSWER: The specification for the product is provided with the solicitation inside of the Statement of Work (SOW). The development and delivery of production level drawings is within the scope of the solicitation, paragraph 2.1.2.2.
5) QUESTION: Where can we find mechanical design specifications/requirements of the holding fixture, cooling fixture, extender cards and wrap around self test cards? SOW 2.2.3 lists these as the parts that constitute the ITA.
ANSWER: The specification for the product is provided with the solicitation inside of the SOW. The development and delivery of production level drawings is within the scope of the solicitation, paragraph
6) QUESTION: Where can we find mechanical design specifications/requirements of the six ITA cables? Only wiring information and parts lists were provided.
ANSWER: The specification for the product is provided with the solicitation inside of the SOW. The development and delivery of production level drawings is within the scope of the solicitation, paragraph 2.1.2.2.
***Please ensure to review all attachments in FBO related to the referenced solicitation***
File details come from the government source that posted it. Updated .