CNC Router Cutting System - Item Description Rev.1_30Jan2026.pdf
PDF 743 KB Posted
- Attached to
- CNC Router Cutting System
- Solicitation number
- FA812526Q0029
About this file
This is an Item Description document from the Department of the Air Force, Oklahoma City Air Logistics Complex (AFMC) at Tinker Air Force Base, prepared by the 76th CMXG/553rd for the procurement of one Computer Numerical Control (CNC) Router Cutting System.
The CNC Router Cutting System must meet specific technical specifications including a work area of at least 60 x 140 inches, maximum cutting speed of at least 1200 inches per minute, rapid traverse of at least 2300 inches per minute, Z-axis clearance of at least 5 inches, and repeatability within ±0.005 inches. The system shall include a vacuum tabletop with locator pins, an Automatic Tool Changer (ATC) Spindle with at least 13 horsepower compatible with Hollow Taper Shank (HSK) 63 tool holders with ER40 collets accommodating router bits up to 1-inch shaft size, and a 12-position rotary spindle tool changer. Additional required features include a programmable dust boot, surface probe with autocalibration sensor, auto misting/lubricating system with Maglube fluid, laser pointer with red crosshair, operator station with 24-inch screen pre-loaded with Coreo software, AlphaCam 3-Axis CAD/CAM software, dust collection kit with at least 6 horsepower, 380-Volt 3-Phase electrical control cabinet, 30 KVA transformer (480 Volt to 380 Volt 3-Phase), and training. The machine shall be delivered at the installation site with no installation required by the contractor. The document is dated January 30, 2026, Revision 1.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
OKLAHOMA CITY AIR LOGISTICS COMPLEX (AFMC)
TINKER AIR FORCE BASE, OKLAHOMA
SUBJECT: Item Description
The 76th CMXG/ 553rd is requesting utilization of funds for the purchase of one (1) Computer Numerical Control (CNC) Router Cutting System.
The requested equipment item description / Specifications are outlined below.
Quantity of one (1) CNC Router Cutting System.
• Work area of at least 60 x 140 inches
• Maximum cutting speed of at least 1200 inches per min
• Rapid traverse of at least 2300 inches per min
• Z-axis clearance of at least 5 inches
• Repeatability within at least +/- 0.005 inches
• Vacuum tabletop
• Locator pins to square sheet material
• Automatic Tool Changer (ATC) Spindle supplied with at least 13 Horsepower (HP), compatible with Hollow Taper Shank (HSK) 63 tool holders w/ ER40 collets. Must allow for router bit tools up to 1" shaft size
• 12 position rotary spindle tool changer
• Programmable dust boot to maximize particulate cleanup
• Surface probe and autocalibration sensor to allow for hands-free tooling length setup
• Auto Misting / Lubricating System for Automatic Tool Changer Spindle w/ Misting Fluid Maglube
• Laser pointer with red crosshair to align material prior to cutting
• Operator station with 24-inch computer screen, pre-loaded with Coreo software
• AlphaCam 3-Axis CAD/CAM software
• Dust collection kit with at least 6 HP
• Electrical control cabinet (380 Volt 3-Phase)
• 30 KVA Transformer (480 Volt to 380 Volt 3-Phase)
• Training
• Machine to be delivered at site of install; no installation required by contractor
Rev. 1_30Jan2026
File details come from the government source that posted it. Updated .