CNC Router Cutting System - Item Description.pdf
PDF 169 KB Posted
- Attached to
- CNC Router Cutting System
- Solicitation number
- FA812526Q0029
About this file
This document is an Item Description from the Department of the Air Force, Oklahoma City Air Logistics Complex at Tinker Air Force Base, detailing specifications for a Computer Numerical Control (CNC) Router Cutting System. The 76th CMXG/553rd unit is requesting funding for one CNC Router Cutting System with specific technical requirements, including a 60 x 140 inch work area, maximum cutting speed of 1200 inches per minute, rapid traverse of 2300 inches per minute, and a Z-axis clearance of 5 inches. Additional required features include a vacuum tabletop, 12-position rotary spindle tool changer, automatic tool changer with 13 HP spindle, programmable dust boot, surface probe, laser pointer alignment, operator station, dust collection kit, and a 30 KVA transformer. The specification also includes provisions for installation and training.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
OKLAHOMA CITY AIR LOGISTICS COMPLEX (AFMC)
TINKER AIR FORCE BASE, OKLAHOMA
SUBJECT: Item Description
The 76th CMXG/ 553rd is requesting utilization of funds for the purchase of one (1) Computer Numerical Control (CNC) Router Cutting System.
The requested equipment item description / Specifications are outlined below.
Quantity of one (1) CNC Router Cutting System.
• Work area of at least 60 x 140 inches
• Maximum cutting speed of at least 1200 inches per min
• Rapid traverse of at least 2300 inches per min
• Z-axis clearance of at least 5 inches
• Repeatability within at least +/- 0.005 inches
• Vacuum tabletop
• Locator pins to square sheet material
• Automatic Tool Changer (ATC) Spindle supplied with at least 13 Horsepower (HP), compatible with Hollow Taper Shank (HSK) 63 tool holders w/ ER40 collets
• 12 position rotary spindle tool changer
• Programmable dust boot to maximize particulate cleanup
• Surface probe and autocalibration sensor to allow for hands-free tooling length setup
• Laser pointer with red crosshair to align material prior to cutting
• Operator station with computer screen
• Dust collection kit with at least 6 HP
• 30 KVA Transformer (480 Volt to 380 Volt 3-Phase)
• Installation and training
File details come from the government source that posted it. Updated .