DATA_ITEM_DESCRIPTION_(DID)_-DI-MGMT-_80441B_GOVERNMENT_PROPERTY_INVENTORY_REPORT.pdf

Data Item Description Rev. B PDF 69 KB Posted

Attached to
Remanufacture of KC-135 Special Coupling, NSN 1680-99-663-6362 FL, P/N 61520-7 / FRS709813
Solicitation number
FA8118-18-R-0051
Issued by

About this file

Data Item Description

View the file

Other versions and copies of DI-MGMT-80441B

File Revision Posted Attached to
A003_DI-MGMT-80441D.pdf Rev. D SOLICITATION FA811826R0055- Repair of the F-16 Oxygen Monitor NSN 1660-01-473-3548
DI-MGMT-80441D Government Property Inventory Report.pdf Rev. D Remanufacture of B-2 Actuator, Electromechanical, Rotary
Government Property (GP) Inventory Report (DI-MGMT-80441D).pdf Rev. D F108 Compressor Inlet Temperature (CIT) Sensor
DI-MGMT-80441D Government Property Inventory Report.pdf Rev. D Tear Down, Test & Evaluation/Repair of B-2 Fuel Level Control Valve Bodies
DID_DI-MGMT-80441D.pdf Rev. D REMANUFACTURE OF B-1 YAW TRIM ACTUATOR
A003_DI-MGMT-80441D.pdf Rev. D Solicitaton-FA8118-26-R-0047 REMAN F-15 Fuel Tank Safety Relief Valve
A003_DI-MGMT-80441D.pdf Rev. D FA8118-26-R-0043_ Remanufacture of C-130 Fuel Boost Pump
A003_DI-MGMT-80441D.pdf Rev. D FA8118-26-R-0038- Remanufacture and Upgrade of B-52 Wing Flap PDU
DI-MGMT-80441D Government Property Inventory Report.pdf Rev. D Overhaul of E-3 Electro-Mechanical Actuator
DI-MGMT-80441D.pdf Rev. D Repair of B-2 Submerged Pump, Fuel Pumping Element & Fuel Pump Unit
DI-MGMT-80441D.pdf Rev. D Amendment-01 FD20302600598_FA811826R0033- Overhaul of B1 Torque tube assembly
DI-MGMT-80441D GFP Inventory Report.pdf Rev. D Remanufacture of B-1 Interlock Assembly, Wing Sweep
DID_DI-MGMT-80441D.pdf Rev. D Overhaul of F-16 Check Valve
DID_DI-MGMT-80441D.pdf Rev. D Overhaul of F-16 Check Valve
DI-MGMT-80441D Government Property Inventory Report.pdf Rev. D Remanufacturing of the F-16 Air Heat Exchanger
DI-MGMT-80441D GFP Inventory Report.pdf Rev. D Remanufacture of F-15 Rudder and Nose Gear Steering Cartridge Assembly
DI-MGMT-80441_A003_Government_Property_Inventory_Report.pdf Revision not stated Repair of Antenna Control for the GPS Program NSN 5985015515043
DI-MGMT-80441_A003_Government_Property_Inventory_Report.pdf Revision not stated Repair of Compressor-Dehydrator for the JTE Program NSN 4440015989067
DI-MGMT-80441_A003_Government_Property_Inventory_Report.pdf Revision not stated Repair of Radar Receiver for the AEWS Program NSN 5840011540006
DI-MGMT-80441_A003_Government_Property_Inventory_Report.pdf Revision not stated Repair of Controller Assembly for the JTE Program NSN 7042015992306
Show all 20

Who attaches DI-MGMT-80441B

Other files

Show all 13

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DATA ITEM DESCRIPTION

Title: COMMERCIAL ASSET VISIBILITY AIR FORCE (CAV AF)/GOVERNMENT

FURNISHED MATERIAL REPORT

Number: DI- MGMT-81634C Approved Date: 20150911 AMSC Number: 9581 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 11 (AFMC/A4RM) Project Number: MGMT-2015-025 Applicable Forms: N/A Use/Relationship: CAV AF is a web based system used to permit the reporting of end item repair and Government Furnished Material (GFM) transactions incident to the execution of Contract Depot Maintenance (CDM) contracts for the purpose of providing visibility and oversight of these assets.

a. This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirements as delineated in the contract.

b. This DID may be used on any depot-level repair contract.

c. This DID supersedes DI-MGMT-81634B.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. Format. The CAV AF System transactions are processed via the World Wide Web, https://www.cavaf.com. Input formats are found in the CAV AF Users Guide. Repair contractors will be furnished with a copy of the CAV AF Users Guide.

3. Content. The contractor reporting shall contain the following transactions and report types as described in the CAV AF Users Guide:

a. End Items:

(1) Receipt

(2) Induction

(3) Awaiting Parts (AWP)

(4) Re-induction

(5) Survey/Scrap

(6) Completion

(7) Shipment

(8) Proof of Shipment

(9) Reversals

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Source: https://assist.dla.mil -- Downloaded: 2016-04-12T17:40Z Check the source to verify that this is the current version before use.

https://www.cavaf.com/

DI-MGMT-81634C

(10) Assets Beyond Economic Repair (BER) and Maintenance Expenditure Limit (MEL)

(11) Bulk Process

(12) Borrow/Payback

b. Government Furnished Material (GFM):

(1) Requisitions:

(a) Create

(b) Modify

(c) Cancel

(d) Follow-up as appropriate

(2) Receive material:

(a) Modify/reverse material option

(3) Issue material:

(a) Reverse issue of material

(4) Transfer material.

(5) Turn-in material:

(a) Reverse material turn in

(6) Condemnation/Plant Clearance of material:

(a) Condemn an item

(b) Reverse Condemnation

(c) Plant Clearance

(d) Reverse Plant Clearance

(7) Shipping of material:

(a) Material Release Order (MRO)

(b) Redistribution Order (RDO)

(c) After Receipt of Order (ARO)

(d) Reverse Material Shipment

End of DI-MGMT-81634C

Source: https://assist.dla.mil -- Downloaded: 2016-04-12T17:40Z Check the source to verify that this is the current version before use.

File details come from the government source that posted it.