Attachment_01_DF-LCS2_Salient_Characteristics_(16_Sep_13).pdf

DEFENSOR FORTIS – LOAD CARRYING SYSTEM 2

SALIENT CHARACTERISTICS

General Salient Characteristics (applies to all items unless specifically stated):

The Defensor Fortis – Load Carrying System 2 (DF-LCS2) shall:

1. Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS).

2. Double-walled and multi-layer construction is required throughout all items to ensure durability.

3. All stitching shall conform to ASTM 6193 lockstitch type 301.

4. Stitching shall conform to 8-10 stitches per inch, without loose ends, runoffs, bunching or other defects.

5. Box stitching or triple back tracks are required at all high stress points to ensure durability.

6. Backstitching or overstitching is required to prevent raveling and provide reinforcement.

7. Thread ends shall be trimmed to 1/16 inch maximum.

8. Raw edges shall be turned under, heat sealed, and/or bound with binding tape to prevent unraveling.

9. Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects that affect performance or durability.

10. Fabric requires water repellent finish.

11. Treated for Near Infrared spectral Reflectance (NIR).

12. Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) and All-

Purpose Lightweight Individual Carrying Equipment (ALICE) legacy system.

13. Unless specifically stated, all items shall be available in:

a. Air Force Digital Tiger Stripe (AFDTS) print,

b. Operational Enduring Freedom Camouflage Pattern (OCP), and

c. Tactical Black

14. Constructed with a minimum of 1000 Denier Cordura.

15. Non-magnetic and non-corrosive materials.

16. Functional in all climates and environment conditions to include, but not limited to: tropical, desert, rain, snow, sand, high temperature/humidity, etc.

17. Eyelets and snap fasteners shall be made of brass with a black chemical finish.

18. Zipper closures shall be heavy-duty, stainless steel.

19. All items shall be fade/scratch resistant, water resistant, and hand washable.

20. All pouches and holders shall:

a. Be PALS compatible.

b. Allow user to access its contents while wearing Mission-Oriented-Protective-Posture

(MOPP) gloves and tactical gloves.

c. Have a single closure device that doesn’t rust, dent, or misshape.

d. Keep contents secure within the pouch (NOTE: Some pouches require a specific type of closure such as a zipper).

e. Requires either metal snap closure or buckle release closure capable of easily opening with one hand (NOTE: Must remain consistent throughout the system unless specifically stated).

f. Easily attaches to H-harness through the use of modular webbing.

g. Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage.

Specific Salient Characteristics for Each Item:

Rifleman Kit (All Items Available in ABU, OCP, and Tactical Black):

1. H-Harness: Harness shall fit over shoulders; shoulder straps shall be a minimum of two and a half (2.5) inches and a maximum of five and a half (5.5) inches at it widest point, tapered while descending vertically; shall allow maximum pouch placement options through the use of Modular Lightweight Load-carrying Equipment (MOLLE) webbing; MOLLE webbing shall be utilized on shoulder straps, back panel, and waist panels; shoulders and sides shall be adjustable for length and girth; shoulder harnesses shall have removable adjustable compression strap located over user’s chest; all adjustment mechanisms shall be made of high impact plastic clips and must be able to maintain their strength while being neatly and tightly secured; shall include padded load-bearing shoulder pads; shall include a reinforced heavy-duty drag handle; shall contain two (2) metal D-rings (one on each shoulder); D-rings shall be centered on top of shoulder seam or no lower than one (1) inch below seam; harness must be lightweight, durable, breathable, and versatile; harness shall contain no hook and loop or elastic adjustment mechanisms; must be available in the following sizes: XL, L, M, S, XS.

2. Single Pocket M-4 Triple Magazine Pouch (quantity 2): Pouch shall hold three (3), thirty (30) round 5.56 mm magazines in a stackable configuration; retention device to securely hold magazines in place (e.g., elastic straps or bungee cord).

3. Single Pocket M-4 Double Magazine Pouch (quantity 4): Pouch shall hold two (2), thirty (30) round 5.56 mm magazines in a stackable configuration; retention device to securely hold magazines in place (e.g., elastic straps or bungee cord).

4. Single Pocket M-9 Single Magazine Pouch (quantity 3): Pouch shall securely hold one (1), fifteen (15) round M9 Beretta (military model 92F) 9mm magazine.

5. Dual Pocket M-9 Single Magazine Pouch with Kydex Insert: Pouch shall securely hold two (2), fifteen (15) round M9 Beretta (military model 92F) 9mm magazines.

6. Single Fragmentation Grenade Pouch (quantity 2): Pouch shall securely hold one (1) fragmentation grenade.

7. Chemical Spray Holder: Pouch shall securely hold one (1) MK-4, Z-305, four (4) ounce dispenser; must allow room for a canister of six and a quarter (6.25) inches in height and one and a half (1.5) inches in diameter.

8. Expandable Baton Holder (6 inch): Pouch shall securely hold a six (6) inch collapsed baton;

requires positive retention capability (e.g., retention teeth, snug fit, etc).

9. Expandable Baton Holder (8 inch): Pouch shall securely hold an eight (8) inch collapsed baton;

requires positive retention capability (e.g., retention teeth, snug fit, etc).

10. Dual Handcuff Pouch: Pouch shall securely hold two (2) pair of hand cuffs.

11. Joint Tactical Radio System (JTRS) Pouch: Pouch shall have a retention device to securely hold radio in place (e.g., elastic straps or bungee cord).

12. XTS 5000 Digital Portable Radio Pouch: Pouch shall have a retention device to securely hold radio in place (e.g., elastic straps or bungee cord).

13. One (1) Quart Canteen (with cup)/General Purpose Pouch (quantity 2): Pouch shall have a retention device to securely hold canteen in place (e.g., elastic straps or bungee cord); must have either a mesh bottom or a grommet emplaced at the bottom for liquid drainage. NOTE:

canteen and cup not included

14. Medical/Bleeder Control Pouch: Pouch shall have a zipper closure device; dimensions large enough to hold an individual first aid kit (IFAK).

15. Hydration Pouch: Pouch shall hold one (1), one hundred (100) fluid ounce hydration kit.

16. Utility Pouch: Pouch shall have a zipper closure device; pouch dimension must be approximately nine (9) inches in length, three (3) inches width, and five (5) inches in height.

17. Latex Glove Pouch: Pouch shall hold a minimum of ten (10) latex gloves (five (5) pair).

18. Protective Insert: Insert shall meet the dimensions to be inserted in the one (1) quart canteen pouch; insert shall provide protective housing for military gear (e.g., night vision goggles); insert shall have a grommet emplaced at the bottom for liquid drainage.

19. All-Purpose Lightweight Individual Carrying Equipment (ALICE) Adaptor: Adaptor shall be compatible with legacy equipment using ALICE clips; adaptor shall be PALS compatible.

20. Flashlight Holder: Pouch shall hold a standard compact flashlight; adjustable to accommodate various versions of flashlights.

21. User Training Guide: Color printed; weatherproof; light weight; durable; small enough to fit in pocket; provides clear instructions on proper wear and maintenance of H-harness, pouches, and bags. NOTE: Multiple uniform color requirements do not apply to this item, illustrations should only be in the ABU pattern.

Team Leader Kit (All Items Available in ABU, OCP, and Tactical Black):

1. Pop Flare Pouch (quantity 2): Pouch shall securely hold one (1) pop flare.

2. Single Smoke Grenade Pouch (quantity 2): Pouch shall hold one (1) smoke grenade. Pouch shall have a retention device to securely hold grenade in place (e.g., elastic straps or bungee cord).

M-203 Grenadiers Kit (All Items Available in ABU, OCP, and Tactical Black):

1. Triple 40 mm Round Pouch (quantity 6): Pouch shall hold three (3) 40 mm rounds; pouch shall have a retention device to securely hold grenades in place (e.g., elastic straps or bungee cord).

M-249 Squad Automatic Weapon (SAW) Gunner Kit (All Items Available in ABU, OCP, and Tactical Black):

1. Utility Pouch: Pouch shall have a zipper closure device; pouch dimension must be

2. Utility Pouch: Pouch shall have a zipper closure device; pouch dimension must be approximately five (5) inches in length, three (3) inches width, and five (5) inches in height.

3. Two-hundred (200) Round Ammo Pouch (quantity 3): Pouch shall securely hold two-hundred

(200) linked 5.56 mm rounds.

M-240 Machine Gunner Kit (All Items Available in ABU, OCP, and Tactical Black):

1. One-Hundred (100) Round Ammo Pouch (quantity 4): Pouch shall securely hold one-hundred

(100) linked 7.62 mm rounds.

2. Utility Pouch: Pouch shall have a zipper closure device; pouch dimension must be

Military Working Dog Kit (All Items Available in ABU, OCP, and Tactical Black):

1. Patrol Medical Kit Pouch: Pouch shall have a zipper closure device; dimensions large enough to hold an individual first aid kit (IFAK); pouch shall be equipped with a drop leg adapter.

2. Two (2) Quart canteen Pouch (quantity 2): Pouch shall have a retention device to securely hold canteen in place (e.g., elastic straps or bungee cord); must have either a mesh bottom or a grommet emplaced at the bottom for liquid drainage. NOTE: canteen not included

3. Utility Pouch (quantity 2): Pouch shall have a zipper closure device; pouch dimension must be approximately five (5) inches in length, three (3) inches width, and five (5) inches in height.

Multi-Mission Kit (All Items Available in ABU, OCP, and Tactical Black):

1. Multi-Mission Pack: Backpack configuration; shall be approximately thirteen and a half (13.5) inches in length, sixteen (16) inches in width, and fifteen (15) inches in height; exterior PALS webbing for MOLLE attachment; shall have a main internal compartment and minimum of three

(3) smaller external compartments; pack shall have two (2) internal and external side pockets (one internal pocket shall have PALS webbing attached to main compartment flap); padded shoulder straps and waist belt; side retention straps; internal hydration pouch capable of holding one (1), one hundred (100) ounce hydration kit; grommet emplaced at the bottom for liquid drainage; zipper closer device on all external compartments (with exception of side pockets).

2. Multi-Mission Pack – Small Accessory Pouch (quantity 2): Shall be approximately thirteen and a half (13.5) inches in length, seven and a half (7.5) inches in width, and seven (7) inches in height; PALS webbing for MOLLE attachment, pouch must be able to be attached to the Multi- Mission Pack; zipper closure device.

3. Utility Pouch (quantity 2): Pouch shall have a zipper closure device; pouch dimension must be approximately nine (9) inches in length, three (3) inches in width, and five (5) inches in height.

Single Purchase Items:

1. Load-Out Bag (Black in color ONLY): Total bag dimension shall be a minimum of thirty-five (35) inches in length, sixteen (16) inches in width, and twelve (12) inches in height; main compartment capacity shall be no smaller than five thousand five hundred (5,500) cubic inches;

reinforced corners and stiffeners on bottom of bag; fully welded, solid metal frame construction; ball-bearing all-terrain wheels (similar to that of a rollerblade skate) located at bottom end of bag; no smaller than two (2) inch wide webbing pull handle attached to wheel end of bag; no smaller than two (2) inch wide webbing pull handle attached to opposite of wheel end of bag and attached to frame to allow pulling by frame and not the bag; two (2) webbing straps not smaller than two (2) inches wide span the distance of the lid and can be attached together (e.g., hook and loop) to make a carrying handle; foam padding throughout to protect contents; minimum of one (1) clear organizer/document pouch (e.g., vinyl), no smaller than eleven and a half (11.5) inches long by eight and half (8.5) inches wide, hook and loop closure, located on top lid of main compartment; minimum of one (1) exterior zippered pocket spanning the length of the bag; minimum of two (2) interior zippered pockets; fully zippered main compartment allows complete access to the bag’s interior; minimum of two(2) removable internal (main compartment) separating dividers; compression straps to stabilize load;

minimum of four (4) heavy-duty D-rings located on exterior for attaching additional gear; all zippers shall be heavy-duty and lockable.

2. Single Pocket M-4 Single Magazine Pouch (Available in ABU, OCP, and Tactical Black): Pouch shall hold one (1), thirty (30) round 5.56 mm magazine; retention device to securely hold magazine in place (e.g., elastic straps or bungee cord).

3. Padded Equipment Belt (Available in ABU and Tactical Black): Allows user to attach pouches through the use of MOLLE; supports drop-leg holsters (both right and left handed); provides user additional support and padding while wearing in conjunction with belt insert; two or two and a quarter (2.25) inch belt insert must comfortably fit inside padded equipment belt;

available in the following sizes: XL, L, M, S, XS.

4. Rigid Belt Insert (Available in Tactical Black and Foliage Green): Two inch wide rigid utility belt;

adjustable; can be worn with or without the padded equipment belt; available in the following sizes: XL, L, M, S, XS.