Attachment_07_-_Air_Force_DF-LCS_Requirements_Acceptability_Checklist_-_11_Dec_2013.xlsx
XLSX spreadsheet 410 KB Posted
- Solicitation number
- FA8054-13-R-0001
About this file
Requirements Acceptability Checklist (11 Dec 13)
View the file
Other files
Show 40 more
Latest 50 of 58 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DF-LCS Acceptability Checklist Defensor Fortis - Load Carrying System Requirements Acceptability Checklist
***** BEST VIEWED AT 80% ZOOM OR HIGHER****
TO ENSURE YOU SEE ENTIRE REQUIREMENT, VERIFY THE REQURIEMENT BY LOOKING AT IT IN THE FORMULA BAR JUST BELOW MICROSOFT EXCEL WINDOW ABOVE
INSTRUCTIONS:
| SECTION A: For each law enforcement equipment category in which you intend to submit a proposal, ENTER A RESPONSE IN EVERY CORRESPONDING YELLOW CELL IN COLUMN G. Failure to respond to every requirement for a category in which you are submitting a proposal (i.e. a yellow cell is blank) will result in an UNACCEPTABLE determination for the entire category. | Acceptable/Unacceptable | Rationale for Unacceptable Score | |
| Defensor Fortis - Load Carrying System Requirements Acceptability Checklist |
Category Legend:
RK: Rifleman Kit TLK: Team Leader Kit (CLIN # 0105-0107) GK: M-203 Grenadier Kit (CLIN # 0108-0110) SK: M-249 Squad Automatic Weapon Kit (CLIN # 0111-0113) MK: M-240 Machine Gunner Kit (CLIN # 0117-0119) MWDK: Military Working Dog Kit (CLIN # 0114-0116) MMK: Multi-Mission Kit (CLIN # 0123-0125) SPI: Single Purchase Items SFCS: Security Forces Combat Shirt
Provide reference for literature submitted to substantiate proof that proposal meets requirement (specify document name and location/page number within document, as appropriate).
FAILURE TO COMPLETE EVERY CELL FOR A GIVEN CATEGORY WILL RESULT IN A TECHNICAL ASSESSMENT OF "UNACCEPTABLE"
| SECTION B | |||
| Category | SECTION A | ||
| Requirement Description | Manufacturer Name | Product Name | Manufacturer |
| Part Number | Offeror | ||
| Part or Item Number | Reference | ||
| Rifleman Kit | H-Harness - CLIN # 0026-0035 | ||
| RK 1.1 | Fits over shoulders |
| RK 1.2 | Shoulder straps shall be minimum of 2.5 inches, maximum of 5.5 inches |
| RK 1.3 | Shoulder straps shall taper while descending vertically |
| RK 1.4 | Allow maximum pouch placement through the use of Modular Lightweight Load-carrying Equipment (MOLLE) webbing |
| RK 1.5 | MOLLE webbing utilized on shoulder straps, back panel, and waist panels |
| RK 1.6 | Shoulders and side adjustable for length and girth |
| RK 1.7 | Removable adjustable compression strap located over user’s chest |
| RK 1.8 | Adjustment mechanisms shall be made of high impact plastic clips |
| RK 1.9 | Adjustment mechanisms must maintain their strength while being neatly and tightly secured |
| RK 1.10 | Padded load-bearing shoulder pads |
| RK 1.11 | Reinforced heavy-duty drag handle |
| RK 1.12 | Two (2) metal D-rings (one on each shoulder) |
| RK 1.13 | D-rings centered on top of shoulder seam or no lower than one (1) inch below seam |
| RK 1.14 | Lightweight, durable, breathable, and versatile |
| RK 1.15 | Contain no hook and loop or elastic adjustment mechanisms |
| RK 1.16 | Available in the following sizes: |
| RK 1.16 (a) | o X-Small: HEIGHT: 56" - 66" WAIST: 22" - 29" |
| RK 1.16 (b) | o Small: HEIGHT: 60" - 70" WAIST: 26" - 33" |
| RK 1.16 (c) | o Medium: HEIGHT: 64" - 74" WAIST: 30" - 37" |
| RK 1.16 (d) | o Large: HEIGHT: 68" - 78" WAIST: 34" - 41" |
| RK 1.16 (e) | o X-Large: HEIGHT: 72" - 82" WAIST: 38" - 45" |
| RK 1.17 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 1.18 | Double-walled and multi-layer construction |
| RK 1.19 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 1.20 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 1.21 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 1.22 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 1.23 | Shall be available in: |
| RK 1.23 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 1.23 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 1.23 (c) | o Tactical Black |
| RK 1.24 | Non-corrosive materials |
| RK 1.25 | Fade/scratch resistant |
| RK 1.26 | Water repellent finish |
| RK 1.27 | Materials Requirements List: |
| RK 1.27 (a) | o 1000 denier Cordura (or the like) |
| RK 1.27 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 1.27 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 1.27 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 1.27 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 1.27 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 1.27 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 1.27 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 1.27 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 1.27 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 1.27 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| Rifleman Kit | Single Pocket M-4 Triple Magazine Pouch - CLIN # 0052-0053 |
| RK 2.1 | Hold three (3), thirty (30) round 5.56 mm magazines in a stackable configuration |
| RK 2.2 | Retention device to securely hold magazines in place |
| RK 2.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 2.4 | Double-walled and multi-layer construction |
| RK 2.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 2.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 2.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 2.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 2.9 | Shall be available in: |
| RK 2.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 2.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 2.9 (c) | o Tactical Black |
| RK 2.10 | Non-corrosive materials |
| RK 2.11 | Fade/scratch resistant |
| RK 2.12 | Water repellent finish |
| RK 2.13 | Materials Requirements List: |
| RK 2.13 (a) | o 1000 denier Cordura (or the like) |
| RK 2.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 2.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 2.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 2.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 2.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 2.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 2.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 2.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 2.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 2.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 2.14 | Be PALS compatible |
| RK 2.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 2.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 2.17 | Keep contents secure within the pouch |
| RK 2.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 2.19 | Capable of easily opening with one hand |
| RK 2.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 2.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Single Pocket M-4 Double Magazine Pouch - CLIN # 0050-0051 |
| RK 3.1 | Hold Two (2), thirty (30) round 5.56 mm magazines in a stackable configuration |
| RK 3.2 | Retention device to securely hold magazines in place |
| RK 3.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 3.4 | Double-walled and multi-layer construction |
| RK 3.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 3.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 3.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 3.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 3.9 | Shall be available in: |
| RK 3.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 3.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 3.9 (c) | o Tactical Black |
| RK 3.10 | Non-corrosive materials |
| RK 3.11 | Fade/scratch resistant |
| RK 3.12 | Water repellent finish |
| RK 3.13 | Materials Requirements List: |
| RK 3.13 (a) | o 1000 denier Cordura (or the like) |
| RK 3.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 3.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 3.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 3.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 3.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 3.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 3.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 3.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 3.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 3.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 3.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 3.14 | Be PALS compatible |
| RK 3.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 3.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 3.17 | Keep contents secure within the pouch |
| RK 3.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 3.19 | Capable of easily opening with one hand |
| RK 3.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 3.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Single Pocket M-9 Single Magazine Pouch - CLIN # 0054-0055 |
| RK 4.1 | Hold one (1), fifteen (15) round M9 Beretta 9mm magazine |
| RK 4.2 | Retention device to securely hold magazine in place |
| RK 4.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 4.4 | Double-walled and multi-layer construction |
| RK 4.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 4.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 4.7 | Treated for Near Infrared spectral Reflectance (NIR) |
| RK 4.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 4.9 | Shall be available in: |
| RK 4.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 4.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 4.9 (c) | o Tactical Black |
| RK 4.10 | Non-corrosive materials |
| RK 4.11 | Fade/scratch resistant |
| RK 4.12 | Water repellent finish |
| RK 4.13 | Materials Requirements List: |
| RK 4.13 (a) | o 1000 denier Cordura (or the like) |
| RK 4.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 4.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 4.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 4.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 4.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 4.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 4.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 4.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 4.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 4.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 4.14 | Be PALS compatible |
| RK 4.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 4.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 4.17 | Keep contents secure within the pouch |
| RK 4.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 4.19 | Capable of easily opening with one hand |
| RK 4.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 4.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Duel Pocket M-9 Single Magazine Pouch - CLIN # 0056-0057 |
| RK 5.1 | Hold two (2), fifteen (15) round M9 Beretta 9mm magazines |
| RK 5.2 | Retention device to securely hold magazine in place |
| RK 5.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 5.4 | Double-walled and multi-layer construction |
| RK 5.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 5.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 5.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 5.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 5.9 | Shall be available in: |
| RK 5.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 5.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 5.9 (c) | o Tactical Black |
| RK 5.10 | Non-corrosive materials |
| RK 5.11 | Fade/scratch resistant |
| RK 5.12 | Water repellent finish |
| RK 5.13 | Materials Requirements List: |
| RK 5.13 (a) | o 1000 denier Cordura (or the like) |
| RK 5.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 5.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 5.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 5.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 5.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 5.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 5.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 5.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 5.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 5.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 5.14 | Be PALS compatible |
| RK 5.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 5.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 5.17 | Keep contents secure within the pouch |
| RK 5.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 5.19 | Capable of easily opening with one hand |
| RK 5.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 5.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Single Fragmentation Grenade Pouch - CLIN # 0060-0061 |
| RK 6.1 | Hold one (1) M-67 fragmentation grenade |
| RK 6.2 | Retention device to securely hold grenade in place |
| RK 6.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 6.4 | Double-walled and multi-layer construction |
| RK 6.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 6.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 6.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 6.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 6.9 | Shall be available in: |
| RK 6.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 6.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 6.9 (c) | o Tactical Black |
| RK 6.10 | Non-corrosive materials |
| RK 6.11 | Fade/scratch resistant |
| RK 6.12 | Water repellent finish |
| RK 6.13 | Materials Requirements List: |
| RK 6.13 (a) | o 1000 denier Cordura (or the like) |
| RK 6.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 6.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 6.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 6.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 6.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 6.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 6.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 6.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 6.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 6.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 6.14 | Be PALS compatible |
| RK 6.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 6.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 6.17 | Keep contents secure within the pouch |
| RK 6.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 6.19 | Capable of easily opening with one hand |
| RK 6.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 6.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Chemical Spray Holder - CLIN # 0096-0097 |
| RK 7.1 | Hold one (1) MK-4, four (4) ounce dispenser |
| RK 7.2 | Must allow room for a canister of six and a quarter (6.25) inches in height and one and a half (1.5) inches in diameter |
| RK 7.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 7.4 | Double-walled and multi-layer construction |
| RK 7.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 7.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 7.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 7.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 7.9 | Shall be available in: |
| RK 7.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 7.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 7.9 (c) | o Tactical Black |
| RK 7.10 | Non-corrosive materials |
| RK 7.11 | Fade/scratch resistant |
| RK 7.12 | Water repellent finish |
| RK 7.13 | Materials Requirements List: |
| RK 7.13 (a) | o 1000 denier Cordura (or the like) |
| RK 7.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 7.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 7.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 7.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 7.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 7.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 7.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 7.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 7.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 7.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 7.14 | Be PALS compatible |
| RK 7.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 7.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 7.17 | Keep contents secure within the pouch |
| RK 7.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 7.19 | Capable of easily opening with one hand |
| RK 7.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 7.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Expandable Baton Holder (6 inch) - CLIN # 0102-0103 |
| RK 8.1 | Hold six (6) inch collapsed batton |
| RK 8.2 | Positive retention capability |
| RK 8.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 8.4 | Double-walled and multi-layer construction |
| RK 8.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 8.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 8.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 8.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 8.9 | Shall be available in: |
| RK 8.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 8.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 8.9 (c) | o Tactical Black |
| RK 8.10 | Non-corrosive materials |
| RK 8.11 | Fade/scratch resistant |
| RK 8.12 | Water repellent finish |
| RK 8.13 | Materials Requirements List: |
| RK 8.13 (a) | o 1000 denier Cordura (or the like) |
| RK 8.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 8.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 8.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 8.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 8.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 8.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 8.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 8.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 8.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 8.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 8.14 | Be PALS compatible |
| RK 8.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 8.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 8.17 | Keep contents secure within the pouch |
| RK 8.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 8.19 | Capable of easily opening with one hand |
| RK 8.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 8.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Expandable Baton Holder (8 inch) - CLIN # 0100-0101 |
| RK 9.1 | Hold eight (8) inch collapsed batton |
| RK 9.2 | Positive retention capability |
| RK 9.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 9.4 | Double-walled and multi-layer construction |
| RK 9.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 9.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 9.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 9.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 9.9 | Shall be available in: |
| RK 9.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 9.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 9.9 (c) | o Tactical Black |
| RK 9.10 | Non-corrosive materials |
| RK 9.11 | Fade/scratch resistant |
| RK 9.12 | Water repellent finish |
| RK 9.13 | Materials Requirements List: |
| RK 9.13 (a) | o 1000 denier Cordura (or the like) |
| RK 9.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 9.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 9.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 9.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 9.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 9.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 9.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 9.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 9.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 9.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 9.14 | Be PALS compatible |
| RK 9.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 9.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 9.17 | Keep contents secure within the pouch |
| RK 9.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 9.19 | Capable of easily opening with one hand |
| RK 9.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 9.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Dual Handcuff Pouch - CLIN # 0083, 0091 |
| RK 10.1 | Hold two (2) pair of hand cuffs |
| RK 10.2 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 10.3 | Double-walled and multi-layer construction |
| RK 10.4 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 10.5 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 10.6 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 10.7 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 10.8 | Shall be available in: |
| RK 10.8 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 10.8 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 10.8 (c) | o Tactical Black |
| RK 10.9 | Non-corrosive materials |
| RK 10.10 | Fade/scratch resistant |
| RK 10.11 | Water repellent finish |
| RK 10.12 | Materials Requirements List: |
| RK 10.12 (a) | o 1000 denier Cordura (or the like) |
| RK 10.12 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 10.12 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 10.12 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 10.12 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 10.12 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 10.12 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 10.12 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 10.12 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 10.12 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 10.12 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 10.13 | Be PALS compatible |
| RK 10.14 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 10.15 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 10.16 | Keep contents secure within the pouch |
| RK 10.17 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 10.18 | Capable of easily opening with one hand |
| RK 10.19 | Easily attaches to H-harness through the use of modular webbing |
| RK 10.20 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Joint tactical Radio System (JTRS) - CLIN # 0078-0079 |
| RK 11.1 | Hold one (1) JTRS (AN/PRC-152) |
| RK 11.2 | Retention device to securely hold radio in place |
| RK 11.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 11.4 | Double-walled and multi-layer construction |
| RK 11.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 11.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 11.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 11.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 11.9 | Shall be available in: |
| RK 11.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 11.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 11.9 (c) | o Tactical Black |
| RK 11.10 | Non-corrosive materials |
| RK 11.11 | Fade/scratch resistant |
| RK 11.12 | Water repellent finish |
| RK 11.13 | Materials Requirements List: |
| RK 11.13 (a) | o 1000 denier Cordura (or the like) |
| RK 11.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 11.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 11.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 11.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 11.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 11.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 11.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 11.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 11.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 11.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 11.14 | Be PALS compatible |
| RK 11.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 11.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 11.17 | Keep contents secure within the pouch |
| RK 11.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 11.19 | Capable of easily opening with one hand |
| RK 11.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 11.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | XTS 5000 Digital Portable Radio Pouch - CLIN # 0062-0063 |
| RK 12.1 | Hold one (1) XTS 5000 Digital Portable Radio |
| RK 12.2 | Retention device to securely hold radio in place |
| RK 12.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 12.4 | Double-walled and multi-layer construction |
| RK 12.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 12.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 12.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 12.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 12.9 | Shall be available in: |
| RK 12.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 12.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 12.9 (c) | o Tactical Black |
| RK 12.10 | Non-corrosive materials |
| RK 12.11 | Fade/scratch resistant |
| RK 12.12 | Water repellent finish |
| RK 12.13 | Materials Requirements List: |
| RK 12.13 (a) | o 1000 denier Cordura (or the like) |
| RK 12.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 12.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 12.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 12.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 12.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 12.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 12.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 12.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 12.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 12.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 12.14 | Be PALS compatible |
| RK 12.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 12.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 12.17 | Keep contents secure within the pouch |
| RK 12.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 12.19 | Capable of easily opening with one hand |
| RK 12.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 12.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | One (1) Quart Canteen with Cup/General Purpose Pouch - CLIN # 0082, 0090 |
| RK 13.1 | Hold one (1) quart canteen with cup |
| RK 13.2 | Retention device to securely hold canteen in place |
| RK 13.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 13.4 | Double-walled and multi-layer construction |
| RK 13.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 13.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 13.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 13.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 13.9 | Shall be available in: |
| RK 13.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 13.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 13.9 (c) | o Tactical Black |
| RK 13.10 | Non-corrosive materials |
| RK 13.11 | Fade/scratch resistant |
| RK 13.12 | Water repellent finish |
| RK 13.13 | Materials Requirements List: |
| RK 13.13 (a) | o 1000 denier Cordura (or the like) |
| RK 13.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 13.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 13.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 13.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 13.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 13.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 13.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 13.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 13.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 13.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 13.14 | Be PALS compatible |
| RK 13.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 13.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 13.17 | Keep contents secure within the pouch |
| RK 13.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 13.19 | Capable of easily opening with one hand |
| RK 13.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 13.21 | Must have mesh or grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Medical/Bleeder Control Pouch - CLIN # 0074-0075 |
| RK 14.1 | Closure device that can be easily opened with one hand |
| RK 14.2 | Dimensions large enough to hold all items located in improved first aid kit (IKAK) |
| RK 14.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 14.4 | Double-walled and multi-layer construction |
| RK 14.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 14.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 14.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 14.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 14.9 | Shall be available in: |
| RK 14.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 14.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 14.9 (c) | o Tactical Black |
| RK 14.10 | Non-corrosive materials |
| RK 14.11 | Fade/scratch resistant |
| RK 14.12 | Water repellent finish |
| RK 14.13 | Materials Requirements List: |
| RK 14.13 (a) | o 1000 denier Cordura (or the like) |
| RK 14.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 14.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 14.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 14.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 14.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 14.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 14.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 14.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 14.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 14.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 14.14 | Be PALS compatible |
| RK 14.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 14.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 14.17 | Keep contents secure within the pouch |
| RK 14.18 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 14.19 | Capable of easily opening with one hand |
| RK 14.20 | Easily attaches to H-harness through the use of modular webbing |
| RK 14.21 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Hydration Pouch - CLIN # 0064-0065 |
| RK 15.1 | Hold one (1), one hundred (100) fluid ounce reservoir (CamelBak Part # 60430) |
| RK 15.2 | Include straps for standalone use |
| RK 15.3 | MOLLE webbing on exterior |
| RK 15.4 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 15.5 | Double-walled and multi-layer construction |
| RK 15.6 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 15.7 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 15.8 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 15.9 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 15.10 | Shall be available in: |
| RK 15.10 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 15.10 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 15.10 (c) | o Tactical Black |
| RK 15.11 | Non-corrosive materials |
| RK 15.12 | Fade/scratch resistant |
| RK 15.13 | Water repellent finish |
| RK 15.14 | Materials Requirements List: |
| RK 15.14 (a) | o 1000 denier Cordura (or the like) |
| RK 15.14 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 15.14 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 15.14 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 15.14 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 15.14 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 15.14 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 15.14 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 15.14 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 15.14 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 15.14 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 15.15 | Be PALS compatible |
| RK 15.16 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 15.17 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 15.18 | Keep contents secure within the pouch |
| RK 15.19 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 15.20 | Capable of easily opening with one hand |
| RK 15.21 | Easily attaches to H-harness through the use of modular webbing |
| RK 15.22 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Utility Pouch (9 x 3 x 5) - CLIN # 0072-0073 |
| RK 16.1 | Zipper closure device |
| RK 16.2 | Dimension approzimately nine (9) inches in length, three (3) inches in width, five (5) inches in height |
| RK 16.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 16.4 | Double-walled and multi-layer construction |
| RK 16.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 16.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 16.7 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 16.8 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 16.9 | Shall be available in: |
| RK 16.9 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 16.9 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 16.9 (c) | o Tactical Black |
| RK 16.10 | Non-corrosive materials |
| RK 16.11 | Fade/scratch resistant |
| RK 16.12 | Water repellent finish |
| RK 16.13 | Materials Requirements List: |
| RK 16.13 (a) | o 1000 denier Cordura (or the like) |
| RK 16.13 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 16.13 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 16.13 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 16.13 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 16.13 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 16.13 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 16.13 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 16.13 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 16.13 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 16.13 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 16.14 | Be PALS compatible |
| RK 16.15 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 16.16 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 16.17 | Keep contents secure within the pouch |
| RK 16.18 | Capable of easily opening with one hand |
| RK 16.19 | Easily attaches to H-harness through the use of modular webbing |
| RK 16.20 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Latex Glove Pouch - CLIN # 0076-0077 |
| RK 17.1 | Hold minimum of ten (10) latex gloves |
| RK 17.2 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 17.3 | Double-walled and multi-layer construction |
| RK 17.4 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 17.5 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
| RK 17.6 | Treated for Near Infrared spectral Reflectance (NIR) (Except for Tactical Black) |
| RK 17.7 | Fully modular with standard Modular Lightweight Load-Carrying Equipment (MOLLE) |
| RK 17.8 | Shall be available in: |
| RK 17.8 (a) | o Air Force Digital Tiger Stripe (AFDTS) print, |
| RK 17.8 (b) | o Operational Enduring Freedom Camouflage Pattern (OCP), and |
| RK 17.8 (c) | o Tactical Black |
| RK 17.9 | Non-corrosive materials |
| RK 17.10 | Fade/scratch resistant |
| RK 17.11 | Water repellent finish |
| RK 17.12 | Materials Requirements List: |
| RK 17.12 (a) | o 1000 denier Cordura (or the like) |
| RK 17.12 (b) | o Nylon Webbing: (A-A-55301, MIL-W-17337 Class 2) |
| RK 17.12 (c) | o Binding Tape: (MIL-PRF-5038 Type III) |
| RK 17.12 (d) | o Hook and Loop (If Utilized): (AA-55126 Type II Class 1) |
| RK 17.12 (e) | o Mesh (If Utilized): 504 (MIL-C-8061 Type II) |
| RK 17.12 (f) | o Thread: Size tex no. 68 (nominal) (also identified as Size E) |
| RK 17.12 (g) | o Bungee and Elastic (If Utilized): (MIL-PRF-5664 Type II Class 1) |
| RK 17.12 (h) | o Plastic Hardware (If Utilized): high impact, color appropriate (Foliage 504 (AFDTS), Coyote Brown (OCP), Black (Tactical Black)) |
| RK 17.12 (i) | o Eyelets and Snap Fasteners, brass with black chemical finish, button cap shells should have a color appropriate (Foliage 504(AFDTS), Coyote Brown(OCP), Black(Tactical Black)) baked-on enamel finish (MS-27980-1B, MS-27980-2B, MS-27980-6B, MS-27980-7B, MS-27980-8B) |
| RK 17.12 (j) | o Zipper closure (If Utilized): shall be die cast metal. Metal will be colored in accordance with pattern (Foliage 504 (AFDTS), Coyote Brown (OCP), and Black (Tactical Black)) |
| RK 17.12 (k) | o NOTE: Air Force Sage Green 1641 may be used instead of Foliage 504 |
| RK 17.13 | Be PALS compatible |
| RK 17.14 | Allow user to access its contents while wearing Mission-Oriented-Protective-Posture (MOPP) gloves and tactical gloves. |
| RK 17.15 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 17.16 | Keep contents secure within the pouch |
| RK 17.17 | Requires metal snap closure or buckle release closure (NOTE: Must remain consistent throughout system unless specifically stated) |
| RK 17.18 | Capable of easily opening with one hand |
| RK 17.19 | Easily attaches to H-harness through the use of modular webbing |
| RK 17.20 | Except where mesh specified, all pouches and holders shall have a grommet emplaced at the bottom for liquid drainage |
| Rifleman Kit | Protective Insert - CLIN # 0092-0093 |
| RK 18.1 | Able to be inserted into one (1) quart canteen pouch |
| RK 18.2 | Provide protective housing for gear |
| RK 18.3 | Utilize a weave and snap closure mechanism with Pouch Attachment Ladder System (PALS) |
| RK 18.4 | Double-walled and multi-layer construction |
| RK 18.5 | Raw edges shall be turned under, heat sealed, and/or bound with binding tape |
| RK 18.6 | Woven and dyed materials shall be free of pattern markings, needle holes, tears or other defects |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .