Attachment_02_DF-LCS2_Non-Flame_Resistant_Combat_Shirt_Salient_Characteristics_(29_Oct_13).pdf

DEFENSOR FORTIS – LOAD CARRYING SYSTEM 2

NON-FLAME RESISTANT COMBAT SHIRT

SECURITY FORCES COMBAT SHIRT

SALIENT CHARACTERISTICS

Salient Characteristics (ABU pattern ONLY):

All fabric shall be lightweight, breathable, moisture wicking and odor resistant; long sleeve “over the head” style with a semi-tight fit that eliminates bunching or riding up under armor; right & left sleeves shall contain: Air Force Digital Tiger Stripe Camouflage Print, hook and loop cuff closures, anti-abrasion padded elbow patches, two-channel flapped pen pocket on both forearms secured by hook & loop fastener tape, zippered shoulder pockets with 6-1/4 inch opening for all sizes (opening toward front of arm); right shoulder pocket must accommodate hook & loop name tape and rank insignia; fastener tape dimensions: loop fastener for name tape shall be 1 inch wide x 5-1/2 inches long, loop fastener for the rank patch shall be 2 inches wide x 2 inches long; torso & mock turtle neck shall be AF Sage Green 1641 (match color in Tiger Stripe Green) or Army Foliage Green 504; modesty panel covering chest area; NIR is not required.

A. Suggested mesh knitted material for torso and/or mock turtle neck collar are: Cotton, polyester, spandex, blends, or other mesh knitted cloth. This material has been designated as “Type A”.

Please see RFP Attachment 13 for additional description and for required tests.

B. Suggested material for sleeves are: Cotton, rayon, nylon, spandex, blends, or other knitted cloth.

This material has been designated as “Type B”. Please see RFP Attachment 14 for additional description and for required tests.

C. Suggested non-mesh knitted material to be used in addition to or instead of the Type A material for torso and/or mock turtle neck collar are: Cotton, rayon, polyester, spandex, blends or other knitted cloth. This material has been designated as “Type C”. Please see RFP Attachment 15 for additional description and for required tests.

D. Suggested material to be used as the backing material and an interfacing for the forearm pocket and shoulder pocket to reinforce the structure shall be woven cloth. This/these material(s) have been designated as “Type D”. Please see RFP Attachment 16 for additional description and for required tests.

Test Table, Type A Material.docx

Test Table, Type B Material.docx

Test Table, Type C Material.docx

Test Table, Type D Material.docx

Combat Shirt Sizing Requirements: The combat shirt shall be available in the following sizes and should generally fit the dimensions listed with each size.

Size Chest

X-Small < 34”

Small 34” – 38″

DEFENSOR FORTIS – LOAD CARRYING SYSTEM 2

NON-FLAME RESISTANT COMBAT SHIRT

Medium 38” – 42″

Large 42” – 46″

X-Large 46” – 50″

XX-Large

50” – 54”

XXX-Large

54” – 58”