B346_Project_Illustrated_Photos.docx

Building 346 Project Illustrated Photos

Picture 1: An example of three conduits installed but Building 346 requires only two conduits Existing fiber to be re-pulled and re-routed

Picture 2: Existing 12 SM fiber that need to be re-routed thru new conduit as shown in Picture 1 Install ¾” back board plywood whole back

Picture 3: Main Comm Room on second floor, install ¾” back board plywood to cover the whole South wall Proposed two 4 inch conduits from Mech. Rm (1st Floor) to Comm. Rm (2nd Floor)

Picture 4: Bore two 4 inch conduits from Mech. Room (1st Floor) ceiling straight up to the Comm. Room (2nd Floor) Two conduits came from Mech. Rm 1st Floor

Picture 5: This is an approximate location where the two 4 inch conduits came from Mech. Room (1st Floor) Existing copper remains in 66 blocks Existing fiber P/P to be relocated to rack

Picture 6: all these existing equipment, 110 blocks, and old wiring need to be removed and clean up with an exception of existing fiber patch panel to be relocated and existing copper remains in 66 blocks image6.jpeg image1.jpeg image2.jpeg image3.jpeg image4.jpeg image5.jpeg