1. Draft RFP - Conformed Amendment FA520919RA0060005.pdf

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

7. ISSUED BY CODE 8. ADDRESS OFFER TO

9. FOR INFORMATION

CALL:

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within calendar days and complete it within calendar days after receiving award, notice to proceed. This performance period is mandatory negotiable. (See ).

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and copies to perform the work required are due at the place specified in Item 8 by (hour) local time (date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

b. An offer guarantee is, is not required.

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

STANDARD FORM 1442 (REV. 8/2014)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

12b. CALENDAR DAYS

YES NO

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER 2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED PAGE OF PAGES

AMOUNTS

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

21. ITEMS ACCEPTED:

AWARD (To be completed by Government)

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA

BY

31c. DATE

STANDARD FORM 1442 (REV. 8/2014) BACK

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 3304(a) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BY

FA520919RA0060005

Section A - Solicitation/Contract Form

Section B - Supplies or Services and Prices/Cost

Additional Information/Notes

Multiple Award Construction Contract (MACC) is a multiple-award, competitive design-build and construction only indefinite delivery/indefinite quantity (IDIQ) construction acquisition based on a general statement of work further defined with each individual task order. The work will consist of multiple disciplines in general construction categories of U.S. Army and Air Force (AF) MACC programs (see Section J, Attachment J-2), entitled below:

MACC, U.S. Army Installations within Honshu, Japan MACC for Yokota Air Base & its Geographically-Separated Units (GSUs), Japan

MACC awardees are required to meet Attachment J-1, para. H010 "Competition" and any other requirements stated under this acquisition.

Minimum/Maximum Contract Amount (see Section J, Attachment J-1, Other Contract Requirements, para.

B002) The period of performance will be a basic 12-month contract period with nine one-year option periods in accordance with (IAW) DFARS 217.204.

This acquisition is unrestricted; however, this solicitation includes clauses authorized for the purpose of construction effort in Japan: FAR 52.236-7 (modified IAW AFFARS 5336.507, to read "Government of Japan" and DFARS 252.225-7042, under which offerors are required to be the firms that have been registered and hold construction contractor license under the law of Japan.

Note: Price fill-in is not required in this section. Price proposal for MACC Mock Project shall be provided based on the Air Force General Provisions (Attachment J-2.b), Statement of Work and its associated documents (Attachment J-3), and submitted along with and Past Performance Information in accordance with Section L.

This MACC Program ceiling is $990,000,000.00

Item Supplies/Service Quantity Unit Unit Price Amount

Basic Year Period: One year from the date of contract award Firm Fixed Price

1 Lot

000101 Ordering Period: From 8 May 20 to 7 May Base Period Firm Fixed Price

Option Line Item 000102

Ordering Period: From 8 May 21 to 7 May Option One Period

Option Line Item 000103

Ordering Period: From 8 May 22 to 7 May Option Two Period

Option Line Ordering Period: From 8 May 23 to 7 May

Item 000104

Option Three Period

Option Line Item 000105

Ordering Period: From 8 May 24 to 7 May Option Four Period

Option Line Item 000106

Ordering Period: From 8 May 25 to 7 May Option Five Period

Option Line Item 000107

Ordering Period: From 8 May 26 to 7 May Option Six Period

Option Line Item 000108

Ordering Period: From 8 May 27 to 7 May Option Seven Period

Option Line Item 000109

Ordering Period: From 8 May 28 to 7 May Option Eight Period

Option Line Item 000110

Ordering Period: From 8 May 29 to 7 May Option Nine Period

Section C - Description/Specifications/Statement of Work

The Contractor shall furnish the services and supplies set forth in Section B in accordance with the General Provisions listed in Section J, Attachment J-2, and statement of work, specifications and/or drawings called for by individual task order when issued.

Requirements Indefinite-Delivery/Indefinite-Quantity (IDIQ) Multiple Award Construction Contract (MACC), U.S. Army Installations within Honshu, Japan and Yokota Air Base and its Geographically-Separated Units (GSUs), Japan

Section D - Packaging and Marking

(Reserved)

Section E - Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.246-12 Inspection of Construction. 1996-08 52.246-13 Inspection -- Dismantling, Demolition, or Removal of Improvements. 1996-08

000101 Inspection and Acceptance Location Both Destination Instructions: Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Telephone: 225-7066 Email:

Option Line Item 000102 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Telephone: 225-7066 Email:

Option Line Item 000103 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Telephone: 225-7066 Email:

Option Line Item 000104 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Telephone: 225-7066 Email:

Option Line Item 000105 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Telephone: 225-7066 Email:

Option Line Item 000106 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Email:

Telephone: 225-7066

Option Line Item 000107 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Email:

Telephone: 225-7066

Option Line Item 000108 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Email:

Telephone: 225-7066

Option Line Item 000109 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Email:

Telephone: 225-7066

Option Line Item 000110 Inspection and Acceptance Location Both Destination Instructions: Designated POC is to be assigned by each Task Order

DoDAAC: F4G3A3 Cage:

DunsNumber:

Duns4Number:

CountryCode: JPN

374TH CES ENGINEERING FLT YOKOTA AB

AF BPN NO MILSBILLS PROCESSES

UNIT 5104 BLDG 937

FUSSA SHI,

JAPAN

OfficeCode:

374 CES

Email:

Telephone: 225-7066

Section F - Deliveries or Performance

000101 Ordering Period From 8 May 20 To 7 May 21 Option Line Item 000102 Ordering Period From 8 May 21 To 7 May 22 Option Line Item 000103 Ordering Period From 8 May 22 To 7 May 23 Option Line Item 000104 Ordering Period From 8 May 23 To 7 May 24 Option Line Item 000105 Ordering Period From 8 May 24 To 7 May 25 Option Line Item 000106 Ordering Period From 8 May 25 To 7 May 26 Option Line Item 000107 Ordering Period From 8 May 26 To 7 May 27 Option Line Item 000108 Ordering Period From 8 May 27 To 7 May 28 Option Line Item 000109 Ordering Period From 8 May 28 To 7 May 29 Option Line Item 000110 Ordering Period From 8 May 29 To 7 May 30

000101

Option Line Item 000102

Option Line Item 000103

Option Line Item 000104

Option Line Item 000105

Option Line Item 000106

Option Line Item 000107

Option Line Item 000108

Option Line Item 000109

Option Line Item 000110

FAR Clauses Incorporated by Full Text

52.211-12 Liquidated Damages-Construction. 2000-09

(a) If the Contractor fails to complete the work within the time specified in individual task order, the Contractor shall pay liquidated damages to the Government in the amount of ___*_____ for each additional calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor's right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

(End of clause) *This clause may be included in individual requirement and incorporated into the resultant Task Order identifying the liquidated damages rate applicable to that individual Task Order.

Section G - Contract Administration Data

ACCOUNTING AND APPROPRIATION DATA

Accounting and appropriation data will be cited on each individual task order(s) as awarded.

Section H - Special Contract Requirements

(Reserved)

Section I - Contract Clauses

Addendum to DFARS 252.225-7043 Antiterrorism/Force Protection for Defense Contractors Outside the United States. (June 2015)

(a) Paragraph 252.225-7043(d) are deleted in their entirety and replaced with following sentence:

(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from the appropriate Antiterrorism Force Protection Office at the Command Headquarters. Also see http://atep.dtic.mil.

Additional information:

Assistant Secretary of Defense for Special Operations and Low Intensity Conflict, ASD (SOLIC); telephone, DSN 227-7205 or commercial (703)697-7205.

For Army contracts: HQDA-AT; telephone, DSN 222-9832 or commercial (703) 692-9832.

For Air Force and Combatant Command contracts: The appropriate Antiterrorism/Force Protection Office at the Command Headquarters. Also see https://atep.dtic.mil.

For additional information: Assistant Secretary of Defense for Homeland Defense and Global Security, ASD (HS/GS); telephone, DSN 227-6566 or 260-8350 or commercial (703) 697-6566 or (571) 256-8350.

(End of Clause)

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.202-1 Definitions. 2013-11 52.203-3 Gratuities. 1984-04 52.203-5 Covenant Against Contingent Fees. 2014-05 52.203-6 Restrictions on Subcontractor Sales to the Government. 2006-09 52.203-7 Anti-Kickback Procedures. 2014-05 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity. 2014-05 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. 2014-05 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. 2010-10 52.203-13 Contractor Code of Business Ethics and Conduct. 2015-10 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper. 2011-05 52.204-9 Personal Identity Verification of Contractor Personnel. 2011-01 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. 2018-10 52.204-12 Unique Entity Identifier Maintenance 2016-10 52.204-13 System for Award Management Maintenance. 2018-10

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

2020-08

52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment.

2015-10

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. 2018-10 52.211-13 Time Extensions. 2000-09 52.211-18 Variation in Estimated Quantity. 1984-04 52.215-2 Audit and Records-Negotiation. 2010-10 52.216-7 Alt I Allowable Cost and Payment 1997-02 52.217-7 Option for Increased Quantity-Sperately Priced Line Item 1989-03 52.222-50 Combating Trafficking in Persons. 2019-01 52.223-3 Hazardous Material Identification and Material Safety Data. 1997-01 52.223-15 Energy Efficiency in Energy-Consuming Products. 2007-12 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving. 2011-08 52.225-13 Restrictions on Certain Foreign Purchases. 2008-06 52.225-14 Inconsistency between English Version and Translation of Contract. 2000-02 52.227-4 Patent Indemnity-Construction Contracts. 2007-12 52.228-2 Additional Bond Security. 1997-10 52.228-3 Workers' Compensation Insurance (Defense Base Act). 2014-07 52.228-4 Workers' Compensation and War-Hazard Insurance Overseas. 1984-04 52.228-5 Insurance-Work on a Government Installation. 1997-01 52.228-11 Pledges of Assets. 2018-08 52.228-14 Irrevocable Letter of Credit. 2014-11 52.229-6 Taxes-Foreign Fixed-Price Contracts. 2013-02 52.232-5 Payments under Fixed-Price Construction Contracts. 2014-05 52.232-17 Interest. 2014-05 52.232-27 Prompt Payment for Construction Contracts. 2017-01 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. 2018-10

52.232-37 Multiple Payment Arrangements 1999-05 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2013-12 52.233-1 Disputes. 2014-05 52.233-3 Protest after Award. 1996-08 52.233-4 Applicable Law for Breach of Contract Claim. 2004-10 52.236-16 Alt Quantity Surveys (Apr 1984) - Alternate I 1984-04 52.236-21 Alt I Specifications and Drawings for Construction (Feb 1997) - Alternate I 1984-04 52.236-13 Alt Accident Prevention (Nov 1991) - Alternate I 1991-11 52.236-2 Differing Site Conditions. 1984-04 52.236-3 Site Investigation and Conditions Affecting the Work. 1984-04 52.236-5 Material and Workmanship. 1984-04 52.236-6 Superintendence by the Contractor. 1984-04 52.236-7 Permits and Responsibilities. 1991-11 52.236-8 Other Contracts. 1984-04

52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

1984-04

52.236-10 Operations and Storage Areas. 1984-04 52.236-11 Use and Possession Prior to Completion. 1984-04 52.236-12 Cleaning Up. 1984-04 52.236-14 Availability and Use of Utility Services 1984-04 52.236-15 Schedules for Construction Contracts. 1984-04 52.236-17 Layout of Work 1984-04 52.236-23 Responsibility of the Architect-Engineer Contractor 1984-04 52.236-24 Work Oversight in Architect-Engineer Contractor 1984-04 52.236-26 Preconstruction Conference. 1995-02 52.242-13 Bankruptcy. 1995-07 52.242-14 Suspension of Work. 1984-04 52.243-4 Changes. 2007-06 52.244-6 Subcontracts for Commercial Items. 2019-08 52.245-1 Alt I Government Property Alt I 2012-04 52.245-1 Government Property 2017-01 52.245-9 Use and Charges. 2012-04 52.246-21 Warranty of Construction. 1994-03 52.248-3 Value Engineering-Construction. 2015-10

52.249-2 Alt I Termination for Convenience of the Government (Fixed-Price)(Apr 2012) - Alternate I.

1996-09

52.249-10 Default (Fixed-Price Construction). 1984-04 52.253-1 Computer Generated Forms. 1991-01

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.201-7000 Contracting Officer's Representative 1991-12 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 2011-09

252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-Related Felonies.

2008-12

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2013-09 252.203-7003 Agency Office of the Inspector General. 2019-08 252.204-7003 Control of Government Personnel Work Product. 1992-04 252.204-7006 Billing Instructions. 2005-10 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. 2019-12 252.205-7000 Provision of Information to Cooperative Agreement Holders 1991-12

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

2019-05

252.211-7007 Reporting of Government-Furnished Property. 2012-08 252.222-7002 Compliance with Local Labor Laws (Overseas). 1997-06 252.223-7001 Hazard Warning Labels. 1991-12 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 2014-09 252.223-7008 Prohibition of Hexavalent Chromium. 2013-06 252.225-7012 Preference for Certain Domestic Commodities. 2017-12 252.225-7041 Correspondence in English. 1997-06 252.225-7043 Antiterrorism/Force Protection for Defense Contractors Outside the United States. 2015-06 252.225-7048 Export-Controlled Items. 2013-06 252.227-7032 Rights In Technical Data And Computer Software (Foreign) 1975-06 252.227-7033 Rights in Shop Drawings 1966-04 252.229-7000 Invoices Exclusive of Taxes or Duties 1997-06 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 2018-12

252.232-7008 Assignment of Claims (Overseas). 1997-06 252.232-7010 Levies on Contract Payments. 2006-12 252.233-7001 Choice of Law (Overseas). 1997-06 252.236-7000 Modification Proposals--Price Breakdown. 1991-12 252.236-7005 Airfield Safety Precautions. 1991-12 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. 2013-06 252.243-7001 Pricing of Contract Modifications. 1991-12 252.243-7002 Requests for Equitable Adjustment. 2012-12 252.244-7000 Subcontracts for Commercial Items 2013-06 252.245-7001 Tagging, Labeling, and Marking of Government-Furnished Property 2012-04 252.245-7002 Reporting Loss of Government Property. 2017-12 252.245-7003 Contractor Property Management System Administration. 2012-04 252.245-7004 Reporting, Reutilization, and Disposal. 2017-12 252.247-7023 Transportation of Supplies by Sea. 2019-02

FAR Clauses Incorporated by Full Text

52.211-10 Commencement, Prosecution, and Completion of Work. 1984-04

As prescribed in 11.404(b), insert the following clause in solicitations and contracts when a fixed-price construction contract is contemplated. The clause may be changed to accommodate the issuance of orders under indefinite-delivery contracts for construction.

Commencement, Prosecution, and Completion of Work (Apr 1984) The Contractor shall be required to (a)commence work under this contract when a Task Order (TO) is issued, within the period specified in the TO after the date the Contractor receives the notice to proceed, (b)prosecute the work diligently, and (c)complete the entire work ready for use not later than the period or date set forth in the TO. The time stated for completion shall include final cleanup of the premises.

52.216-19 Order Limitations. 1995-10

As prescribed in 16.506(b), insert a clause substantially the same as follows:

Order Limitations (Oct 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than __Y500,000__ , the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor- (1)Any order for a single item in excess of __Y1,000,000,000__ ;

(2)Any order for a combination of items in excess of __Y2,000,000,000__; or (3)A series of orders from the same ordering office within __five (5) business__ days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section.

(c)If this is a requirements contract (i.e.,includes the Requirements clause at subsection52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d)Notwithstanding paragraphs(b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within __three (3) business__ days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

52.216-22 Indefinite Quantity. 1995-10

As prescribed in 16.506(e), insert the following clause:

Indefinite Quantity (Oct 1995) (a)This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

(b)Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the maximum. The Government shall order at least the quantity of supplies or services designated in the Schedule as the minimum.

(c)Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d)Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after __the delivery date shown in individual Task Order__.

(End of clause)

52.217-9 Option to Extend the Term of the Contract. 2000-03

As prescribed in 17.208(g), insert a clause substantially the same as the following:

Option to Extend the Term of the Contract (Mar 2000) (a)The Government may extend the term of this contract by written notice to the Contractor within __30 days prior to expiration of contract period__ ; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least __sixty (60)__ days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b)If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c)The total duration of this contract, including the exercise of any options under this clause, shall not exceed __120 months__ (months) (years).

(End of clause)

52.228-15 PERFORMANCE AND PAYMENT BONDS – CONSTRUCTION (OCT 2010) 2010-10

is modified to reflect the Contracting Officer’s waiver of requirement for payment bonds and sureties appearing on Treasury Department Circular 570 which was made in accordance with FAR 28.102-1(a)(1) and FAR 28.202(b), as follows.

1. The words of "and payment" are deleted from the words of "performance and payment" at the clause title, para. (b), and para. (b)(3)(i), respectively. In addition, para. (b)(2) and (e) are deleted from the clause in their entirety.

2. The words of “, or sureties authorized for issuance of the performance bond by the Financial Service Agency, theGovernment of Japan” are added at the end of 1st sentence in para. (d).

(End of clause)

52.236-1 Performance of Work by the Contractor. 1984-04

As prescribed in 36.501(b), insert the following clause: [Complete the clause by inserting the appropriate percentage consistent with the complexity and magnitude of the work and customary or necessary specialty subcontracting (see 36.501 (a)).] Performance of Work by the Contractor (Apr 1984) The Contractor shall perform on the site, and with its own organization, work equivalent to at least __twelve (12)__ percent of the total amount of work to be performed under the contract. This percentage may be reduced by a supplemental agreement to this contract if, during performing the work, the Contractor requests a reduction and the Contracting Officer determines that the reduction would be to the advantage of the Government.

(End of clause)

52.236-7 PERMITS AND RESPONSIBILITIES (NOV 1991), is modified as follows, in accordance with AFFARS 5336.507: 1991-11

The first sentence in the clause at FAR 52.236-7 is modified to reflect "host government and political subdivisions" in lieu of "Federal, State, and Municipal" (End of clause)

52.252-2 Clauses Incorporated by Reference. 1998-02

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

- Acquisition.GOV, URL: https://www.acquisition.gov/browse/index/far

- Defense Pricing and Contracting, URL: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

(End of clause)

52.252-4 Alterations in Contract. 1984-04

As prescribed in 52.107(d), insert the following clause in solicitations and contracts in order to revise or supplement, as necessary, other parts of the contract, or parts of the solicitation that apply after contract award, except for any clause authorized for use with a deviation. Include clear identification of what is being altered.

Alterations in Contract (Apr 1984)

Portions of this contract are altered as follows:

__None.__ ____ ____ (End of clause)

52.252-6 Authorized Deviations in Clauses. 1984-04

As prescribed in 52.107(f), insert the following clause in solicitations and contracts that include any FAR or supplemental clause with an authorized deviation. Whenever any FAR or supplemental clause is used with an authorized deviation, the contracting officer shall identify it by the same number, title, and date assigned to the clause when it is used without deviation, include regulation name for any supplemental clause, except that the contracting officer shall insert (DEVIATION) after the date of the clause.

Authorized Deviations in Clauses (Apr 1984) (a)The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter1) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the clause.

(b)The use in this solicitation or contract of any __Defense Federal Acquisition Regulation Supplement __. (48 CFR __Chapter 2__) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.216-7006 Ordering. 2011-05

As prescribed in 216.506(a), use the following clause:

ORDERING (MAY 2011)

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from __the date of contract award__ through __12 months after the date of contract award__.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c)(1) If issued electronically, the order is considered issued when a copy has been posted to the Electronic Document Access system, and notice has been sent to the Contractor.

(2) If mailed or transmitted by facsimile, a delivery order or task order is considered issuedwhen the Government deposits the order in the mail or transmits by facsimile. Mailing includes transmittal by U.S. mail or private delivery services.

(3) Orders may be issued orally only if authorized in the schedule.

(End of clause)

252.225-7045 Balance of Payments Program--Construction Material Under Trade Agreements. 2016-09

(a) Definitions. As used in this clause—

Caribbean Basin country construction material means a construction material that---

(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item--

(i) Means any item of supply (including construction material) that is--

(A) A commercial item (as defined in paragraph (1) of the definition of ``commercial item'' in section 2.101 of the Federal Acquisition Regulation);

(B) Sold in substantial quantities in the commercial marketplace; and

(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(ii) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means--

(i) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(ii) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Designated country means--

(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as ``the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu'' (Chinese Taipei)), Ukraine, or the United Kingdom);

(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means--

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if--

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components.

Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or

(B) The construction material is a COTS item.

Free Trade Agreement country construction material means a construction material that--

(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

Least developed country construction material” means a construction material that—

(i) Is wholly the growth, product, or manufacture of a least developed country; or

(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that--

(i) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA and Free Trade Agreements apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for designated country construction materials.

(c) The Contractor shall use only domestic or designated country construction material in performing this contract, except for--

(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;

(2) Information technology that is a commercial item; or

(3) The construction material or components listed by the Government as follows:

None

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions. 2018-12

(a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment request using the following document type(s).

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Construction Payment Invoice

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Not Applicable

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Pay Official DoDAAC To be specified in individual task order(s) Issue By DoDAAC FA5209 Admin DoDAAC FA5209 Inspect By DoDAAC To be specified in individual task order(s) Accept at Other DoDAAC To be specified in individual task order(s)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

Not applicable

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

252.236-7001 Contract Drawings and Specifications. 2000-08

As prescribed in 236.570(a), use the following clause:

CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

| Title || __See Section J __ || File || __See Section J __ || Drawing No. || __See Section J __ |

(End of clause)

AFFARS Clauses Incorporated by Full Text

5352.201-9101 Ombudsman 6/1/2016

"(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Air Force Installation Contracting Agency (AFICA)/KH (Chief Enlisted Manager), 25 E Street, Suite B-100, JBPH-H, HI 96853-5427, Phone: (808) 449-8569, FAX: (808) 449-8571.

Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer."

5352.223-9001 Health and Safety on Government Installations 10/1/2019

(a) In performing work under this contract on a Government installation, the contractor shall:

(1) Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractor and Government personnel performing or in any way coming in contact with the performance of this contract; and

(2) Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes.

(b) The contracting officer may, by written order, direct Air Force Occupational Safety and Health (AFOSH) Standards and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract.

(c) Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract.

(End of clause)

5352.242-9000 Contractor Access to Air Force Installations 11/1/2012

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, valid vehicle insurance certificate, and (see 374th Security Forces Squadron, Applicable for Vehicle Pass) to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-501, Personnel Security Program Management.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

(End of clause)

Section J - List of Attachments

SECTION J has been amended as follows:

FROM:

Attachment J-1 Other Contract…