Atch_2_-_DD254.pdf

Please wait...

If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.

You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.

For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.

Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13

Solicitation Number:

1. General. This contract involves varying levels of classified access and clearance requirements based on individual office and mission requirements. Contractors shall follow all applicable Standard Office Procedures.

a. All contractor personnel performing under this contract shall possess a minimum of an interim Secret clearance, unless specified as requiring a higher level clearance, prior to reporting to any assignment within OUSD (P).

b. Following the major heading below there are variable provisions, which the applicability is indicated by a block marked by the COR/CM as applicable or not applicable as appropriate to this contract. Provisions not containing this variable indicating not applicable will apply in all cases to performance of this contract.

c. Prior approval of the contracting activity and concurrence of the COR/CM is required for any subcontracting.

d. The use of Portable Electronic Devices (PED’s) with wireless capabilities shall be addressed in the Standard Operating Procedures of each facility where classified information processing is accomplished.

e. All contractor personnel performing under this contract shall be required to sign and execute a Classified Information Non-Disclosure agreement (SF-312). The nondisclosure statement shall be required as part of the initial in-processing and must be executed prior to performing any work under this contract. The non-disclosure agreement will be maintained on file within the OUSD (P) Security Office. Contractor personnel who refuse to sign the non-disclosure agreement will not be permitted to work within OUSD (P). Procedures and requirements for handling Sensitive But Unclassified (which includes Proprietary Information) are contained at Attachment 5.

2. Top Secret Clearance. Specified positions designated by the Contracting Officers Representative (COR) or Contract Monitor (CM) will require a Top Secret clearance.

__XX__ Applicable ____Not Applicable

3. Actual Performance. Contractor performance is restricted to the Pentagon, Washington, D.C. 20301 and other OUSD (P) offices throughout the National Capital Region and Contractor Locations.

4. COMSEC Information. The contractor will require administrative access to classified COMSEC material and may be required to serve as alternate COMSEC Responsible Officer. The contractor will not receipt, copy, or generate classified COMSEC material unless specifically authorized in writing by the COR or CM. The contractor must forward any request

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13 for COMSEC material/information through the government program manager to the COMSEC Manager. The contractor is governed by DoD 5220.22-M, COMSEC Supplement to the NISPOM. Access to COMSEC is restricted to US citizens holding a final US Government clearance. Such information is not releasable to personnel holding a reciprocal clearance. Access to COMSEC information at the contractor facility requires establishment of a COMSEC account. Contractor will coordinate with the Defense Security Service and the NSA Central Office of Record. Contractor is responsible for accountable COMSEC information and must provide a complete inventory as required by the COMSEC manager. Clearances appropriate to the equipment classification level are required. COMSEC briefings will be provided by the government. COMSEC material/information may not be released to DoD contractors without OSD Program Manager approval. Contractor must forward requests for COMSEC material/information to the COMSEC officer through the program office. Contractor complies with NSA Manual 3-16 (U) in the control and protection of COMSEC material/information. Access to COMSEC material is restricted to U.S. citizens holding final U.S. Government clearances. Such information will not be released to personnel holding only reciprocal clearances. Prior approval from the GCA is required in order for a Prime Contractor to grant COMSEC access to a subcontractor. The Prime Contractor will also notify the NSA (National Security Agency) Central Office of Record (COR) before negotiating or awarding subcontracts.

___ Applicable __XX_ Not Applicable.

5. Restricted Data. Access to RESTRICTED DATA, information which is classified and controlled under the Atomic Energy Act of 1954, or CRITICAL NUCLEAR WEAPON DESIGN INFORMATION (CNWDI) is required. A final U.S. Government Top Secret clearance is required for this project. Information in this category relates to: (l) the design, manufacture or utilization of atomic weapons, (2) the production of special nuclear material; or, (3) the use of special nuclear material in the production of energy. Information of this category shall not be disseminated outside official and authorized channels without the consent of the originator. Access to and dissemination of this information shall be governed by DoD Instruction 5230.23 and DoD Directive C-5230.23.

____ Applicable __XX_ Not Applicable.

6. CNWDI Information. Contract personnel are permitted access to CNWDI in the performance of this contract. The government program manager or designated representative will brief all contractors prior to granting access to CNWDI information. Contractor must be briefed by at appropriate government agent and follow the guidelines as outline in DoD Directive 5210.2. Restricted Data shall be handled in accordance with the applicable guidance for Nuclear Weapons (Secret/RD)

____ Applicable __XX_ Not Applicable.

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13

7. Formerly Restricted Data. Information that is removed from the Restricted Data category upon a joint determination by the Department of Energy (or antecedent agencies) and the Department of Defense that such information relates primarily to the military utilization of atomic weapons and that such information can be safeguarded adequately as classified defense information. For Foreign Dissemination however, it is treated in the same manner as Restricted Data. Information of this category shall not be disseminated outside official channels without the consent of the originator. Access to and dissemination of this information shall be governed by DoD Instruction 5230.23 and DoD Directive C-5230.23. Access to FORMERLY RESTRICTED DATA requires a final U.S. Government clearance at the TS level.

8. SCI Requirement. Performance requiring access to or at the SCI level shall be governed by the SCI addendum titled "Release of Sensitive Compartmented Information (SCI) Intelligence Information to U.S. Contractors". Prior approval of contracting activity is required for subcontracting. Access to Intelligence information requires SCI indoctrination and a final Top Secret U.S. Government clearance. The names of contractor personnel requiring access to SCI shall be submitted to the contracting officer's representative (COR) for approval. The COR will approve and coordinate visits by contractor personnel to insure satisfactory justification. See attachment 4 for guidance.

_ XX Applicable ___ Not Applicable.

9. Non SCI Intelligence. Performance requiring access to Non-SCI intelligence information shall be governed by the addendum titled "Release of Non-SCI Intelligence Information to DoD Contractors" Contractor will require eligibility to SCI. See attachment 3 for guidance.

__ XX Applicable __ _ Not Applicable.

10. Special Access Provisions Apply. Contract requires access to Special Access Programs. (DoD Overprint to the NISPOM Supplement) Security guidance for operating procedures will be provided under separate cover. All SAP material will remain the property of the releasing Government User Agency. Upon completion or cancellation of this contract, SAP materials previously furnished will be returned to the direct custody of Director, OUSD(P) SAPCO, to include final reports produced at the SAP level. The SAP Program Manager will provide security classification guidance for the performance of the contract. Contractor personnel must adhere to the special access requirements/procedures developed by the SAP program/study manager. User agency managers will grant access when the need-to-know is established and required to accomplish the required efforts under this contract. SAP program/study manager must approve all requests for access.

____ Applicable __XX_ Not Applicable.

11. NATO Information. The contractor is permitted access to North Atlantic Treaty Organization (NATO) information in performance of this contract. The government project

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13 manager is the designated representative that will ensure the Contractor Facility Security Officer (FSO) and concerned employees are NATO briefed prior to access being granted. The Prime contractor must receive approval from the Government Contracting Authority (GCA) to grant NATO accesses to a subcontractor. Access requires a final US Government clearance at the appropriate level. Forward NATO classified materials needed by the contactor only from a Service Sub-registry directly to the contractor concerned. Special briefings are required for access to NATO information. Prior approval of the government program manager is required for subcontracting. Individuals must have a briefing in accordance with United States Security Authority for NATO (USSAN) Affairs Instruction 1-69 (5100.55 Enclosure 2), "United States Implementation of NATO Security Procedures", Section VI. The briefing ensures individuals with access to NATO information are aware of pertinent security regulations for safeguarding NATO classified information and the consequences of negligent handling. The use of the Central U.S. Registry (CUSR) is mandated for receiving and transferring NATO materials. The Government Contracting Activity must authorize the hand-carrying of NATO classified material across international borders. This will only be authorized when urgent situation exists. Designated couriers must have a NATO Courier Certificate. Access to the Joint Staff Information Network (JSIN-C) requires the individual to be cleared for NATO Secret. The contractor is not authorized to destroy controlled classified material.

____ Applicable __XX_ Not Applicable.

12. Foreign Government Information. The contractor is permitted access to Foreign Government Information in the performance of this contract. Access to Foreign Government Information requires a US Government clearance at the appropriate level. Comply with the Foreign Government information requirements in the NISPOM Chapter 10, Section 3.

____ Applicable __XX_ Not Applicable.

13. FOUO Information. Performance requiring access to For Official Use Only information

(FOUO) shall be governed by the addendum titled "For Official Use Only Addendum to DoD Contractors"

_XX_ Applicable ____ Not Applicable.

14. Performance in Government Facilities. This contract requires personnel to perform work as a member of, or in direct support of, the OUSD (P) staff and will require individuals to work within Government controlled facilities. The Contract Monitor will provide security classification guidance for the performance of this contract. OUSD (P) will provide security classification guidance for the performance of this contract.

_XX_ Applicable ____ Not Applicable.

Continuation for DD254, Block 13

a. In and Out Processing. This contract requires personnel to perform work as a member of, or in direct support of the OUSD (P) staff and will require individuals to obtain and maintain government issued building access cards to enable performance within Government controlled facilities. As such, all contractor personnel are required to in-process with the Administration Directorate prior to reporting for work. As a condition of this contract, all personnel issued government access cards are required to ensure the card is returned to the OUSD (P) Security office upon removal from the contract or termination of employment under this contract. Applies in all cases where paragraph 14 above is marked applicable.

15. Common Access Cards. This contract requires personnel to obtain the Government issued Common Access Card in order to provide identification or to access government computer systems. As such, all contractor personnel are required to in-process with the Administration Directorate Badge and CAC Coordinator immediately (within 24 hours) of reporting for work. As a condition of this contract, all personnel issued Government Common Access Cards are required to ensure the card is returned to the OUSD (P) Security Office or the CAC Coordinator upon removal from the contract or termination of employment under this contract.

_XX_ Applicable ____ Not Applicable

16. NIPRNET Access Required. This contract requires the contractor to access and use the unclassified government computer system known as the NIPRNET at locations identified by the government customer. All provisions of DoD Information Technology Security Certification and Accreditation Process (DITSCAP) apply. This system is Unclassified only, and inappropriate or improper use of the system will result in a reportable incident to the Defense Security Service.

_XX_ Applicable ____ Not Applicable.

17. SIPRNET Access Required. This contract requires the contractor to access and use the classified government computer system known as the SIPRNET at locations identified by the government customer. All provisions of DoD Information Technology Security Certification and Accreditation Process (DITSCAP) apply. This system is authorized for use up to but not exceeding the Secret level only and inappropriate or improper use of the system will result in a reportable incident to the Defense Security Service.

_XX_ Applicable ____ Not Applicable.

18. Receive Classified Documents. Contract performance is restricted to: Contract facility listed in 8a and various government sites located in the National Capital Region; specified locations will be determined by the government contract monitor. OUSD (P) will provide security classification guidance under performance of this contract. Contractor will receive classified documents only. Cleared personnel are required to perform this service because access to classified information cannot be precluded. The contractor is not authorized to release

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13 classified information to any activity or person, including sub-contractors, without the government Contracting Officer Representative's (COR) written approval. Only with the expressed permission of the government COR may the contractor reproduce any classified information/material. All requirements for control and accounting for original documentation and copies apply. All classified information must be marked in accordance with Executive Order 13526. All applicable provisions of DoD 5220.22M, National Industrial Security Program Operating Manual (NISPOM) and supplements apply.

____ Applicable _XX _ Not Applicable.

19. Receive and Generate classified material. The contractor will be required to receive and generate classified documents or other material. A security classification guide is not available for this program. Any classified information generated in the performance of this contract shall be derivatively classified according to the markings shown on the source material or guidance received from OUSD (P). Classified information and materials shall be protected in accordance with the policies and procedures established by DoDM 5200.01-V1, the NISPOM and all other applicable Executive Orders.

Specific classification guidance will be provided on individual tasks by the COR or CM. The contractor must ensure that applicable classification guidance and marking provisions are complied with lAW the NISPOM. In any case where classification guidance has not been provided, the contractor is to safeguard the information and seek written guidance from the COR or CM prior to release of the information to anyone except the COR or CM.

____ Applicable __XX_ Not Applicable.

a. The contractor must restrict access to only those individuals who possess the necessary security clearance and who are actually providing services under the contract with a valid need-to-know. Further dissemination to other contractors, subcontractors, other government agencies, private individuals or organizations is prohibited unless authorized in writing by the originating agency through the CM.

b. In cases where classified information is authorized to be stored or generated at the vendor facility, the contractor must ensure each employee having access to classified material is fully aware of the special security requirements for this material and shall maintain records in a manner that will permit the contractor to furnish, on demand, the names of individuals who have had access to this material in their custody.

c. Upon completion or termination of the classified contract, or sooner when the purpose of the release has been served, the contractor will return all classified information (furnished or generated) to the source from which received unless retention or other disposition instructions are authorized in writing by the COR. Applies in all cases where paragraph 0 above is marked applicable.

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13

d. The contractor must designate an individual who is working on the contract as custodian. The designated custodian shall be responsible for receipting and accounting for all classified material received under this contract. This does not mean that the custodian must personally sign for all classified material. The inner wrapper of all classified material dispatched should be marked for the attention of a designated custodian and must not be opened by anyone not working directly on the contract.

e. Within 30 days after the final product is received and accepted by the procuring agency, classified intelligence materials released to or generated by the contractor, must be returned to the originating agency through the contract monitor unless written instructions authorizing destruction or retention are issued. Requests to retain material shall be directed to the CM for this contract in writing and must clearly indicate the justification for retention and identity of the specific document to be retained. Applies in all cases where paragraph 0 above is marked applicable.

f. Classification, re-grading, or declassification markings of documentation produced by the contractor shall be consistent with that applied to the information or documentation from which the new document was prepared. If a compilation of information or a complete analysis of a subject appears to require a security classification other than that of the source documentation, the contractor shall assign the tentative security classification and request instructions from the contract monitor. Pending final determination, the material shall be safeguarded as required for its assigned or proposed classification, whichever is higher, until the classification is changed or otherwise verified. Applies in all cases where paragraph 0 above is marked applicable.

Fabricate, Modify, or Store Classified Hardware. Contracts will fabricate, modify, receive, and generate classified information and hardware. Contractor is authorized to process and store up to and including Top Secret information and hardware at contract facilities listed in 8a. Actual knowledge and production of classified information is required for performance of this contract. Cleared personnel are required to perform this service because access to classified information cannot be precluded. The contractor is not authorized to release classified information to any activity or person, including subcontractors, without the government Contracting Monitor's written approval. Only with the expressed permission of the government's Contracting Monitor may the contractor reproduce any classified information/material. All requirements for control and accounting for original documentation and copies apply.

____ Applicable __XX_ Not Applicable.

21. Perform Services Only. Actual knowledge and production of classified information is required for performance of this contract. Cleared personnel are required to perform this service because access to classified information cannot be precluded. The contractor is not authorized to

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13 release classified information to any activity or person, including sub-contractors, without the government Contracting Monitor's written approval. Only with the expressed permission of the government's Contracting Monitor may the contractor reproduce any classified information/material. All requirements for control and accounting for original documentation and copies apply. All applicable provisions for DoD 5220.22M and NISPOM supplements apply.

_XX__Applicable __ Not Applicable.

22. Have access to classified outside the US. Contractor will require access to classified information outside the U.S. to include its possessions and Trusted Territories.

_ XX Applicable __ _ Not Applicable.

23. Government Travel. As required by the Government Program Manager, contractors will be authorized travel/Temporary Duty (TDY) outside the NCR region for official government business. Note that if 11c is marked yes then 1b must have level of storage at contract facility. The government program manager will provide travel orders and direction prior to departure.

_XX__ Applicable ___ Not Applicable.

24. DTIC Access Required. Contractor is authorized to use the services of the Defense Technical Information Center (DTIC) and is required to prepare and process DD Form 1540. Contracting Officials, with concurrence from the program manager/project manager, must review and approve contractors need-to-know and ensure all identified DTIC information requirements are within Scope of Work prior to approving the DD Form 1540. Certification of need-to-know and use of DTIC field of interest register for the acquisition of reference materials classified through Top Secret RD, disclosures authorizations, and visits clearance approvals, fall under the responsibility of the Contract Monitor (CM).

___ Applicable _XX__ Not Applicable.

25. Require a COMSEC Account. Contractor must forward request for COMSEC material/information through government program manager to COMSEC monitor. Contractor is responsible for accountable COMSEC information and must provide a complete inventory as required by COMSEC account manager.

____ Applicable _XX_ Not Applicable.

26. TEMPEST. The contractor shall ensure that emissions security (EMSEC) conditions related to this contract are minimized.

____ Applicable _XX_ Not Applicable.

Continuation for DD254, Block 13

27. Operations Security (OPSEC). The contractor shall comply with OPSEC requirements specified in DoD 5220-22-M, National Industrial Security Program Operating Manual (NISPOM). OPSEC requirements are applicable to the contractor's SAP procedures but only if specified by the SAP Program Office.

____ Applicable __XX_ Not Applicable.

28. Authorized to use Defense Courier Service. Contractor must obtain written approval from the contracting activity and provide the request for DCS services to Commander, Defense Courier Service, Attn: Operations Division, Fort George G. Meade, MD. 20755-5370. Prior approval of the contracting activity is required before granting subcontractor use of DCS services.

____ Applicable __XX_ Not Applicable.

29. Courier Authorizations. This contract requires personnel to obtain the Government issued Courier Authorization. All courier authorizations will be in accordance with the NISPOM. As such, all contractor personnel are required to in-process with the Administration Directorate Security Office to obtain courier cards. Instructions for obtaining the courier card is contained on the OUSD (P) intranet home page and must be adhered to in order to obtain the courier card. As a condition of this contract, all personnel issued Courier Cards are required to ensure the card is returned to the OUSD (P) Security Office or the CAC Coordinator upon removal from the contract or termination of employment under this contract.

_XX_ Applicable ____ Not Applicable.

30. Performance as Office Security Managers. Contractor may require performance as alternate Office Security Manager. Responsibilities of the Office Security Manager are contained on the OUSD (P) intranet home page and must be adhered to.

_XX_ Applicable ____ Not Applicable.

31. Performance as Terminal Area Security Officer. Contractor may require performance as alternate Terminal Area Security Officer. Responsibilities of the Terminal Area Security Officer are contained on OUSD (P) intranet home page and must be adhered to.

_XX_ Applicable ____ Not Applicable.

32. IT Operation and Support Positions. Contractor will require access to sensitive government automated information systems (AIS) at different levels. Contractor must comply with the attached WHS Policy IT Bulleting 2004-0003.may require performance as alternate Terminal Area Security Officer. Responsibilities of the Terminal Area Security Officer are contained on OUSD (P) intranet home page and must be adhered to.

_XX_ Applicable ____ Not Applicable.

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13

Attachment 2

FOUO Requirements for DoD Contractors:

The following procedures will be used to protect FOR OFFICIAL USE ONLY (FOUO) materials:

1. Handling. Access to FOUO material shall be limited to those employees needing the material to perform their duties. The FOUO marking is assigned to material created by a DoD User Agency. FOUO is not a classification, but requires extra precautions to ensure it is not released to the public.

2. Marking. Mark unclassified documents containing FOUO: "FOR OFFICIAL USE ONLY at the bottom of each page and back cover (if any). In a classified document:

a. Mark individual paragraph that contains FOUO, but not classified material by placing

"FOUO at the beginning of the paragraph.

b. Mark top and bottom of each page that has both FOUO and classified material with the highest security classification of the material on that page.

c. Mark "FOUO at the bottom of each page that has FOUO but not classified material.

d. If a classified document also contains FOUO material or if the classified material becomes FOUO when declassified, place the following statement on the bottom of the cover or the first page under the classification marking: "NOTE: If declassified, review the document to make sure the material is not FOUO and not exempt under DoD Regulation 5400.7 before public release.

e. Mark other records such as computer print outs, photographs, films, tapes" Or slides FOR OFFICIAL USE ONLY" so the receiver or viewer knows the record contains FOUO material.

f. Mark each part of a message that contains FOUO material. Unclassified messages containing FOUO material must show the abbreviation "FOUO before the text begins.

g. Ensure documents that transmit FOUO material call attention to any FOUO attachments.

h. FOUO material released to a contractor by a DoD user agency must have the following statement on the front page or cover: 11-118 DOCUMENT CONTAINS MATERIAL EXEMPT FROM MANDATORY DISCLOSURE UNDER THE FREEDOM OF INFORMATION ACT. EXEMPTION(S) APPLY."

3. Storage. During normal duty hours, place FOUO material in an out-of-sight location if your work area is accessible to persons who do not have a valid need for the material. After normal

OUSD (P) Requirements for DoD Contractors

Continuation for DD254, Block 13 duty hours, store FOUO material to prevent unauthorized access. File with other unclassified records in unlocked files or desks when internal building security is provided. When there is no internal security, locked buildings or rooms usually provide adequate after hours protection. For additional protection, store FOUO material in locked containers such as file cabinets, desks, or bookcases. Expenditure of funds for security containers or closed areas solely for the protection of FOUO material is prohibited.

4. Transmission. FOUO documents and materials may be transmitted via first class mail, parcel post or for bulky shipments fourth class mail. Within the CONUS discussion of FOUO material on the telephone is authorized if necessary for the performance of the contract. Electronic transmission of FOUO information (voice, data or facsimile) should be by approved secure communications systems whenever practical.

5. Release. FOUO material shall not be released outside of the contractor's facility except to the representative of the DoD.

6. Destruction. When no longer needed FOUO material shall be disposed of by a method that precludes its disclosure to unauthorized individuals.

DRAFT

SAMPLE

PREVIOUS EDITION IS OBSOLETE.

Page of AEM LiveCycle Designer

DD FORM 254, APR 2018

NEEDS DD67

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)

OMB No. 0704-0567 OMB approval expires:

October 31, 2020 The public reporting burden for this collection of information, 0704-0567, is estimated to average 70 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.

1. CLEARANCE AND SAFEGUARDING

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)

3. THIS SPECIFICATION IS: (X and complete as applicable.)

a. ORIGINAL (Complete date in all cases.)

b. REVISED (Supersedes all previous specifications.)

4. IS THIS A FOLLOW-ON CONTRACT?

If yes, complete the following:

Classified material received or generated under

5. IS THIS A FINAL DD FORM 254?

If yes, complete the following:

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

7. SUBCONTRACTOR(S) (Click button if you choose to add or list the subcontractors -- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor)

8. ACTUAL PERFORMANCE (Click button to add more locations.)

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)

e. NATIONAL INTELLIGENCE INFORMATION:

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)

12. PUBLIC RELEASE

Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)

13. SECURITY GUIDANCE

The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.

(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.)

14. ADDITIONAL SECURITY REQUIREMENTS

Requirements, in addition to NISPOM requirements for classified information, are established for this contract.

If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

15. INSPECTIONS

Elements of this contract are outside the inspection responsibility of the CSO.

If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)

17. CERTIFICATION AND SIGNATURES

Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked.

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL

9.0.0.2.20120627.2.874785 DD 254, DoD Contract Security Classification Specification List of Attachments [1] (All Files Must be Attached Prior to Signing, i.e., for any digital signature on the form) DD254 DASD Attachments.docx

1899 Powers Ferry Road, Suite 330 Atlanta, GA 30339

2. All approval and permission for SCI and non-SCI intelligence information and responsibility will be accomplished by the ODASD (CN&GT) and not the COR.

3. Classified work is to be performed at the Pentagon, Arlington, VA or other government sites within the National Capital Region.

4. Access to classified information outside the US to include its possessions and trusted territories will be accomplished in accordance with OCONUS travel requirements.

5. See attached

Joint Base Langley-Eustis, VA 23665-2788

Address: 129 Andrews St, Suite 110 Joint Base Langley-Eustis, VA 23665-2788