FA4887-17-R-0001_Mechanical_Solicitation.docx

FA4887-17-R-0001

Section B - Supplies or Services and Prices

Year 1 Mechanical, Luke AFB, Std

FFP

Mechanical Construction, Luke AFB, AZ, Standard Hours, in accordance with (IAW) Statement of Work (SOW). 5 Year Ordering Period - Year 1. (from date of Award through 12 months) FOB: Destination

SIGNAL CODE: A

MAX

NET AMT

Yr 1 Mechanical, Luke AFB, Non-Std

Mechanical Construction, Luke AFB, AZ, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 1. (from date of Award through 12 months)

MAX

Yr 1 Mechanical, Gila Bend, Std

Mechanical Construction, Gila Bend Air Force Auxiliary Field (AFAF), AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 1. (from date of Award through 12 months)

MAX

Yr 1 Mechanical, Gila, Non-Std

Mechanical Construction, Gila Bend, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 1. (from date of Award through 12 months)

MAX

Yr 1 Mechanical, Ft Tuthill, Std

Mechanical Construction, Ft Tuthill, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 1. (from date of Award through 12 months)

MAX

Yr 1 Mechanical, Ft Tuthill, Non-Std

Mechanical Construction, Ft Tuthill, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 1. (from date of Award through 12 months)

MAX

Year 2, Mechanical, Luke AFB, Std

Mechanical Construction, Luke AFB, AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 2. (12 month period beginning immediately following the end of Year 1)

MAX

Yr 2, Mechanical, Luke, Non-Std

Mechanical Construction, Luke AFB, AZ, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 2. (12 month period beginning immediately following the end of Year 1)

MAX

Yr 2, Mechanical, Gila Bend, Std

Mechanical Construction, Gila Bend Air Force Auxiliary Field (AFAF), AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 2. (12 month period beginning immediately following the end of Year 1)

MAX

Yr 2, Mechanical, Gila, Non-Std

Mechanical Construction, Gila Bend, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 2. (12 month period beginning immediately following the end of Year 1)

MAX

Yr 2, Mechanical, Ft Tuthill, Std

Mechanical Construction, Ft Tuthill, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 2. (12 month period beginning immediately following the end of Year 1)

MAX

Yr 2, Mechanical, Ft Tuthill, Non-Std

Mechanical Construction, Ft Tuthill, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 2. (12 month period beginning immediately following the end of Year 1)

MAX

Year 3, Mechanical, Luke AFB, Std

Mechanical Construction, Luke AFB, AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 3. (12 month period beginning immediately following the end of Year 2)

MAX

Yr 3, Mechanical, Luke, Non-Std

Mechanical Construction, Luke AFB, AZ, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 3. (12 month period beginning immediately following the end of Year 2)

MAX

Yr 3, Mechanical, Gila Bend, Std

Mechanical Construction, Gila Bend Air Force Auxiliary Field (AFAF), AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 3. (12 month period beginning immediately following the end of Year2)

MAX

Yr 3, Mechanical, Gila, Non-Std

Mechanical Construction, Gila Bend, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 3. (12 month period beginning immediately following the end of Year 2)

MAX

Yr 3 Mechanical, Ft Tuthill, Std

Mechanical Construction, Ft Tuthill, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 3. (12 month period beginning immediately following the end of Year 2)

MAX

Yr 3, Mechanical, Ft Tuthill, Non-Std

Mechanical Construction, Ft Tuthill, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 3. (12 month period beginning immediately following the end of Year 2)

MAX

Year 4, Mechanical, Luke AFB, Std

Mechanical Construction, Luke AFB, AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 4. (12 month period beginning immediately following the end of Year 3)

MAX

Yr 4, Mechanical, Luke, Non-Std

Mechanical Construction, Luke AFB, AZ, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 4. (12 month period beginning immediately following the end of Year 3)

MAX

Yr 4, Mechanical, Gila, Non-Std

Mechanical Construction, Gila Bend, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 4. (12 month period beginning immediately following the end of Year 3)

MAX

Yr 4, Mechanical, Gila Bend, Std

Mechanical Construction, Gila Bend Air Force Auxiliary Field (AFAF), AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 4. (12 month period beginning immediately following the end of Year 3)

MAX

Yr 4, Mechanical, Ft Tuthill, Std

Mechanical Construction, Ft Tuthill, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 4. (12 month period beginning immediately following the end of Year 3)

MAX

Yr 4, Mechanical, Ft Tuthill, Non-Std

Mechanical Construction, Ft Tuthill, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 4. (12 month period beginning immediately following the end of Year 3)

MAX

Year 5, Mechanical, Luke AFB, Std

Mechanical Construction, Luke AFB, AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 5. (12 month period beginning immediately following the end of Year 4)

MAX

Yr 5, Mechanical, Luke, Non-Std

Mechanical Construction, Luke AFB, AZ, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 5. (12 month period beginning immediately following the end of Year 4)

MAX

Yr 5, Mechanical, Gila Bend, Std

Mechanical Construction, Gila Bend Air Force Auxiliary Field (AFAF), AZ, Standard Hours, IAW SOW. 5 Year Ordering Period - Year 5. (12 month period beginning immediately following the end of Year 4)

MAX

Yr 5, Mechanical, Gila, Non-Std

Mechanical Construction, Gila Bend, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 5. (12 month period beginning immediately following the end of Year 4)

MAX

Yr 5, Mechanical, Ft Tuthill, Std

Mechanical Construction, Ft Tuthill, Standard Hours, IAW SOW. O5 Year Ordering Period - Year 5. (12 month period beginning immediately following the end of Year 4)

MAX

Yr 5, Mechanical, Ft Tuthill, Non-Std

Mechanical Construction, Ft Tuthill, Non-Standard Hours, IAW SOW. 5 Year Ordering Period - Year 5. (12 month period beginning immediately following the end of Year 4)

MAX

E4 Clicks Software

E4 Clicks Software reimbursement at actual cost only. Invoices shall be submitted within 30 days showing actual cost paid to e4Clicks. Contractors are authorized to obtain GSA pricing for e4Clicks.

MAX

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

$2,000.00

$6,000,000.00

DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND ORDER VALUE

The minimum quantity and order value for each Delivery/Task Order issued shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for each Delivery/Task Order issued shall not exceed the maximum quantity and order value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

$2,000.00

$6,000,000.00

CLIN DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND CLIN ORDER VALUE

The minimum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not exceed the maximum quantity and order value stated in the following table.

CLIN

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

$2,000.00

$1,028,560.00

$2,000.00

$23,920.00

$2,000.00

$107,640.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$1,028,560.00

$2,000.00

$23,920.00

$2,000.00

$107,640.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$1,028,560.00

$2,000.00

$23,920.00

$2,000.00

$107,640.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$1,028,560.00

$2,000.00

$23,920.00

$2,000.00

$107,640.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$1,028,560.00

$2,000.00

$23,920.00

$2,000.00

$107,640.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$11,960.00

$2,000.00

$20,000.00

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLAUSES INCORPORATED BY REFERENCE

Section F - Deliveries or Performance

DELIVERY INFORMATION

29-JUN-2018

SCOTT HINDT

13970 GILLESPIE DRIVE

BLDG 343

ENGINEERING SECTION

LUKE AFB AZ 85309

623-856-9573

F2U308

29-JUN-2018

F2U308

29-JUN-2018

F2U308

29-JUN-2018

F2U308

29-JUN-2018

F2U308

29-JUN-2018

F2U308

29-JUN-2019

F2U308

29-JUN-2019

F2U308

29-JUN-2019

F2U308

29-JUN-2019

F2U308

29-JUN-2019

F2U308

29-JUN-2019

F2U308

29-JUN-2020

F2U308

29-JUN-2020

F2U308

29-JUN-2020

F2U308

29-JUN-2020

F2U308

29-JUN-2020

F2U308

29-JUN-2020

F2U308

29-JUN-2021

F2U308

29-JUN-2021

F2U308

29-JUN-2021

F2U308

29-JUN-2021

F2U308

29-JUN-2021

F2U308

29-JUN-2021

F2U308

29-JUN-2022

F2U308

29-JUN-2022

F2U308

29-JUN-2022

F2U308

29-JUN-2022

F2U308

29-JUN-2022

F2U308

29-JUN-2022

F2U308

29-JUN-2022

F2U308

Section G - Contract Administration Data

CLAUSES INCORPORATED BY FULL TEXT

52.211-10 COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK (APR 1984) - ALTERNATE I (APR 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than date specified in each individual Task Order. The time stated for completion shall include final cleanup of the premises.

The completion date is based on the assumption that the successful offeror will receive the notice to proceed by 10 days after award. The completion date will be extended by the number of calendar days after the above date that the Contractor receives the notice to proceed, except to the extent that the delay in issuance of the notice to proceed results from the failure of the Contractor to execute the contract and give the required performance and payment bonds within the time specified in the offer.

(End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

CONSTRUCTION PAYMENT INVOICE

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

FA4887

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

julie.kocinski@us.af.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

julie.kocinski@us.af.mil

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

Section I - Contract Clauses

CLAUSES INCORPORATED BY FULL TEXT

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016)

Covered contractor information system means an information system that is owned or operated by a contractor that processes, stores, or transmits Federal contract information.

Federal contract information means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government, but not including information provided by the Government to the public (such as on public Web sites) or simple transactional information, such as necessary to process payments.

Information means any communication or representation of knowledge such as facts, data, or opinions, in any medium or form, including textual, numerical, graphic, cartographic, narrative, or audiovisual (Committee on National Security Systems Instruction (CNSSI) 4009).

Information system means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information (44 U.S.C. 3502).

Safeguarding means measures or controls that are prescribed to protect information systems.

(b) Safeguarding requirements and procedures.

(1) The Contractor shall apply the following basic safeguarding requirements and procedures to protect covered contractor information systems. Requirements and procedures for basic safeguarding of covered contractor information systems shall include, at a minimum, the following security controls:

(i) Limit information system access to authorized users, processes acting on behalf of authorized users, or devices (including other information systems).

(ii) Limit information system access to the types of transactions and functions that authorized users are permitted to execute.

(iii) Verify and control/limit connections to and use of external information systems.

(iv) Control information posted or processed on publicly accessible information systems.

(v) Identify information system users, processes acting on behalf of users, or devices.

(vi) Authenticate (or verify) the identities of those users, processes, or devices, as a prerequisite to allowing access to organizational information systems.

(vii) Sanitize or destroy information system media containing Federal Contract Information before disposal or release for reuse.

(viii) Limit physical access to organizational information systems, equipment, and the respective operating environments to authorized individuals.

(ix) Escort visitors and monitor visitor activity; maintain audit logs of physical access; and control and manage physical access devices.

(x) Monitor, control, and protect organizational communications (i.e., information transmitted or received by organizational information systems) at the external boundaries and key internal boundaries of the information systems.

(xi) Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.

(xii) Identify, report, and correct information and information system flaws in a timely manner.

(xiii) Provide protection from malicious code at appropriate locations within organizational information systems.

(xiv) Update malicious code protection mechanisms when new releases are available.

(xv) Perform periodic scans of the information system and real-time scans of files from external sources as files are downloaded, opened, or executed.

(2) Other requirements. This clause does not relieve the Contractor of any other specific safeguarding requirements specified by Federal agencies and departments relating to covered contractor information systems generally or other Federal safeguarding requirements for controlled unclassified information (CUI) as established by Executive Order 13556.

(c) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in subcontracts under this contract (including subcontracts for the acquisition of commercial items, other than commercially available off-the-shelf items), in which the subcontractor may have Federal contract information residing in or transiting through its information system.

52.211-12 LIQUIDATED DAMAGES--CONSTRUCTION (SEP 2000)

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount, to be detemined on each individual Task Order as needed, for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor's right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

52.216-19 ORDER LIMITATIONS. (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $2,000.00 (insert dollar figure or quantity), the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor:

(1) Any order for a single item in excess of $1,000,000.00 (insert dollar figure or quantity);

(2) Any order for a combination of items in excess of $1,000,000.00 (insert dollar figure or quantity); or

(3) A series of orders from the same ordering office within 10 days that together call for quantities exceeding the limitation in subparagraph (1) or (2) above.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) above.

(d) Notwithstanding paragraphs (b) and (c) above, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 3 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-22 INDEFINITE QUANTITY. (OCT 1995)

(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum". The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum".

(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after the completion date of this contract’s ordering period or the completion date of the last active task order, whichever is later.

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

``Active duty wartime or campaign badge veteran,'' ``Armed Forces service medal veteran,'' ``disabled veteran,'' ``protected veteran,'' ``qualified disabled veteran,'' and ``recently separated veteran'' have the meanings given at FAR 22.1301.

(b) Equal opportunity clause. The Contractor shall abide by the requirements of the equal opportunity clause at 41 CFR 60-300.5(a), as of March 24, 2014. This clause prohibits discrimination against qualified protected veterans, and requires affirmative action by the Contractor to employ and advance in employment qualified protected veterans.

(c) Subcontracts. The Contractor shall insert the terms of this clause in subcontracts of $150,000 or more unless exempted by rules, regulations, or orders of the Secretary of Labor. The Contractor shall act as specified by the Director, Office of Federal Contract Compliance Programs, to enforce the terms, including action for noncompliance. Such necessary changes in language may be made as shall be appropriate to identify properly the parties and their undertakings.

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUL 2014)

(a) Equal opportunity clause. The Contractor shall abide by the requirements of the equal opportunity clause at 41 CFR 60-741.5(a), as of March 24, 2014. This clause prohibits discrimination against qualified individuals on the basis of disability, and requires affirmative action by the Contractor to employ and advance in employment qualified individuals with disabilities.

(b) Subcontracts. The Contractor shall include the terms of this clause in every subcontract or purchase order in excess of $15,000 unless exempted by rules, regulations, or orders of the Secretary, so that such provisions will be binding upon each subcontractor or vendor. The Contractor shall act as specified by the Director, Office of Federal Contract Compliance Programs of the U.S. Department of Labor, to enforce the terms, including action for noncompliance. Such necessary changes in language may be made as shall be appropriate to identify properly the parties and their undertakings.

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997)

(a) "Hazardous material", as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract).

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract.

Material Identification No.

(If none, insert "None")

(c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous.

(d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Material Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Material Safety Data Sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award.

(e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data.

(f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property.

(g) Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material.

(h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows:

(1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to--

(i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials;

(ii) Obtain medical treatment for those affected by the material; and

(iii) Have others use, duplicate, and disclose the data for the Government for these purposes.

(2) To use, duplicate, and disclose data furnished under this clause, in accordance with subparagraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data.

(3) The Government is not precluded from using similar or identical data acquired from other sources.

52.223-11 OZONE-DEPLETING SUBSTANCES AND HIGH GLOBAL WARMING POTENTIAL HYDROFLUOROCARBONS (JUN 2016)

Global warming potential means how much a given mass of a chemical contributes to global warming over a given time period compared to the same mass of carbon dioxide. Carbon dioxide's global warming potential is defined as 1.0.

High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA's Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

Ozone-depleting substance means any substance the Environmental Protection Agency designates in 40 CFR part 82 as--

(1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or

(2) Class II, including, but not limited to, hydrochlorofluorocarbons.

(b) The Contractor shall label products that contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j (b), (c), (d), and (e) and 40 CFR part 82, subpart E, as follows:

Warning: Contains (or manufactured with, if applicable) *_______, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.

* The Contractor shall insert the name of the substance(s).

(c) Reporting. For equipment and appliances that normally each contain 50 or more pounds of hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons, the Contractor shall--

(1) Track on an annual basis, between October 1 and September 30, the amount in pounds of hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons contained in the equipment and appliances delivered to the Government under this contract by--

(i) Type of hydrofluorocarbon (e.g., HFC-134a, HFC-125, R-410A, R-404A, etc.);

(ii) Contract number; and

(iii) Equipment/appliance;

(2) Report that information to the Contracting Officer for FY16 and to www.sam.gov, for FY17 and after--

(i) Annually by November 30 of each year during contract performance; and

(ii) At the end of contract performance.

(d) The Contractor shall refer to EPA's SNAP program (available at http://www.epa.gov/snap) to identify alternatives. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables available at http://www.epa.gov/snap.

52.223-20 AEROSOLS (JUN 2016)

Global warming potential means how much a given mass of a chemical contributes to global warming over a given time period compared to the same mass of carbon dioxide. Carbon dioxide's global warming potential is defined as 1.0.

High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA's Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at http://www.epa.gov/snap/).

Hydrofluorocarbons means compounds that contain only hydrogen, fluorine, and carbon.

(b) Unless otherwise specified in the contract, the Contractor shall reduce its use, release, or emissions of high global warming potential hydrofluorocarbons, when feasible, from aerosol propellants or solvents under this contract. When determining feasibility of using a particular alternative, the Contractor shall consider environmental, technical, and economic factors such as--

(1) In-use emission rates, energy efficiency;

(2) Safety, such as flammability or toxicity;

(3) Ability to meet technical performance requirements; and

(4) Commercial availability at a reasonable cost.

(c) The Contractor shall refer to EPA's SNAP program to identify alternatives. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables available at http://www.epa.gov/snap/.

52.223-21 FOAMS (JUN 2016)

Global warming potential means how much a given mass of a chemical contributes to global warming over a given time period compared to the same mass of carbon dioxide. Carbon dioxide's global warming potential is defined as 1.0.

High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA's Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at http://www.epa.gov/snap/.

Hydrofluorocarbons means compounds that contain only hydrogen, fluorine, and carbon.

(b) Unless otherwise specified in the contract, the Contractor shall reduce its use, release, and emissions of high global warming potential hydrofluorocarbons and refrigerant blends containing hydrofluorocarbons, when feasible, from foam blowing agents, under this contract. When determining feasibility of using a particular alternative, the Contractor shall consider environmental, technical, and economic factors such as--

(1) In-use emission rates, energy efficiency, and safety;

(2) Ability to meet performance requirements; and

(3) Commercial availability at a reasonable cost.

(c) The Contractor shall refer to EPA's SNAP program to identify alternatives. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables available at http://www.epa.gov/snap/.

52.225-9 BUY AMERICAN—CONSTRUCTION MATERIALS (MAY 2014)

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is--

(i) A commercial item (as defined in paragraph (1) of the definition at FAR 2.101);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4) such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into a construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means--

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the construction material (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Domestic construction material means--

(1) An unmanufactured construction material mined or produced in the United States;

(2) A construction material manufactured in the United States, if--

(i) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or

(ii) The construction material is a COTS item.

Foreign construction material means a construction material other than a domestic construction material.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Domestic preference.

(1) This clause implements 41 U.S.C. chapter 83, Buy American, by providing a preference for domestic construction material. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for construction material that is a COTS item. (See FAR 12.505(a)(2)). The Contractor shall use only domestic construction material in performing this contract, except as provided in paragraphs (b)(2) and (b)(3) of this clause.

(2) This requirement does not apply to information technology that is a commercial item or to the…