FA466122R0009 Solicitation.pdf

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

7. ISSUED BY CODE 8. ADDRESS OFFER TO

9. FOR INFORMATION

CALL:

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within calendar days and complete it within calendar days after receiving award, notice to proceed. This performance period is mandatory negotiable. (See ).

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and copies to perform the work required are due at the place specified in Item 8 by (hour) local time (date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

b. An offer guarantee is, is not required.

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

STANDARD FORM 1442 (REV. 8/2014)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

12b. CALENDAR DAYS

YES NO

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER 2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED PAGE OF PAGES

Created On: 19 Aug 2022, 10:53 AM Central Standard Time

AMOUNTS

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

21. ITEMS ACCEPTED:

AWARD (To be completed by Government)

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA

BY

31c. DATE

STANDARD FORM 1442 (REV. 8/2014) BACK

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 3304(a) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BY

Section A - Solicitation/Contract Form

Simplified Acquisition Base Engineering Requirement (SABER) IDIQ

Purchase Requisition Number: A021690

Proposal Identifier: FA466122R0009

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Qty Unit Unit Price

Amount

0001 BASE YEAR PROPOSAL FEE

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task orders at $250K to $500K, in a non-secure area.

Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task orders above $500K, in a non-secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task orders between $250K to $500K, work in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task orders above $500K, work in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task order between $250K to $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task orders above $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task order between $250K to $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

SABER task orders above $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER proposal fees OY1

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER task orders between $250K to $500K, in a non-secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER task orders above $500k, work in non-secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER task orders between $250K to $500K, in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER task order above $500K, in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

SABER proposal fee OY2

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a non-secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a non-secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, work in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, work in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

Proposal fee award OY3

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a non-secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a non-secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, work in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, work in a secure area Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a non-secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders between $250K and $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

40 Each

Option Line Item

SABER Task Orders above $500K, in a secure area Non-Standard work hours, coefficient is X.XX%

Pricing Arrangement: Firm Fixed Price

Section C - Description/Specifications/Statement of Work

Requirements The Simplified Acquisition Base Engineering Requirement (SABER) ID/IQ for Dyess AFB, Texas is for a broad range of maintenance, repair, alteration, and minor construction ranging from $250,000 - $1,000,000.00.

The contractor is required to furnish all requirements including but not limited to materials, labor, plans, tools, equipment, transportation, supervision, management, quality assurance, and technical design support in accordance with the contract specifications per task order. Please see attachment 1, SABER IDIQ.

Section D - Packaging and Marking

Section E - Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.246-12 Inspection of Construction. Aug 1996

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.245-7001 Tagging, Labeling, and Marking of Government-Furnished Property. Apr 2012

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: POC will be designated per task order.

DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: POC will be determined at the task order level

DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: POC will be determined at the task order level

DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Inspection and Acceptance Location

Both Destination Instructions: POC will be determined at the task order level

DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

Section F - Deliveries or Performance

Overall Contract Delivery Period

From date of lead time event to beginning of performance 10 Calendar Days Date of Notice to Proceed Receipt

From date of lead time event to completion of performance 250 Calendar Days Date of Notice to Proceed Receipt

Contractor Destination

Line Item Delivery Schedule QTY Address and POC

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Days Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2022 To 19 Oct 2023

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Days Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2022 To 19 Oct 2023

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

Period of Performance From 20 Oct 2022 To 19 Oct 2023

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2022 To 19 Oct 2023

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2022 To 19 Oct 2023

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Days Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2022 To 19 Oct 2023

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

From 20 Oct 2022 To 19 Oct 2023

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2022 To 19 Oct 2023

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2022 To 19 Oct 2023

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2023 To 19 Oct 2024

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Delivery Schedule 40 Each Place of Performance

From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2023 To 19 Oct 2024

DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2023 To 19 Oct 2024

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Period of Performance From 20 Oct 2023 To 19 Oct 2024

40 Each

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2023 To 19 Oct 2024

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

20 Oct 2023 To 19 Oct 2024

Option Line Item

Period of Performance From 20 Oct 2023 To 19 Oct 2024

40 Each

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2023 To 19 Oct 2024

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2023 To 19 Oct 2024

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2024 To 19 Oct 2025

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2024 To 19 Oct 2025

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2024 To 19 Oct 2025

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2024 To 19 Oct 2025

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

20 Oct 2024 To 19 Oct 2025

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2024 To 19 Oct 2025

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2024 To 19 Oct 2025

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2024 To 19 Oct 2025

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

20 Oct 2024 To 19 Oct 2025

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

20 Oct 2025 To 19 Oct 2026

Option Line Item

Delivery Schedule From date of lead time event to completion of performance 365 Calendar Year Date of Notice to Proceed Receipt

Period of Performance From 20 Oct 2025 To 19 Oct 2026

40 Each Place of Performance DoDAAC: F1R310 CountryCode: USA

7CES CC ENGINEERING

AF BPN NO MILSBILLS PROCESSES

710 3RD ST

DYESS AFB, TX 79607

UNITED STATES

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.211-18 Variation in Estimated Quantity. Apr 1984 52.242-15 Stop-Work Order. Aug 1989 52.247-34 F.o.b. Destination. Nov 1991 52.247-35 F.o.b. Destination, Within Consignee's Premises. Apr 1984

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.201-7000 Contracting Officer's Representative. Dec 1991 252.204-7006 Billing Instructions. Oct 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.236-7000 Modification Proposals--Price Breakdown. Dec 1991

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. Dec 2018

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) As used in this clause-Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, asElectronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall-WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the PracticeWAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File TransferWAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reportsWAWF payment instructions.

in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s):Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

NA

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2in1

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(f) [Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields inDocument routing.

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F87700

Issue By DoDAAC FA4661

Admin DoDAAC FA4661

Inspect By DoDAAC F1R310

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

WAWF Helpdesk

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.202-1 Definitions. Jun 2020 52.203-5 Covenant Against Contingent Fees. May 2014 52.203-6 Restrictions on Subcontractor Sales to the Government. Jun 2020 52.203-7 Anti-Kickback Procedures. Jun 2020 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity. May 2014 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. May 2014 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.203-13 Contractor Code of Business Ethics and Conduct. Nov 2021

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights.

Jun 2020

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper. May 2011 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. Jun 2020 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities.

Nov 2021

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Nov 2021

52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment.

Nov 2021

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. Oct 2018 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.210-1 Market Research. Nov 2021 52.215-8 Order of Precedence-Uniform Contract Format. Oct 1997 52.219-6 Notice of Total Small Business Set-Aside. Nov 2020 52.219-8 Utilization of Small Business Concerns. Oct 2018 52.219-13 Notice of Set-Aside of Orders. Mar 2020 52.222-6 Construction Wage Rate Requirements. Aug 2018 52.222-7 Withholding of Funds. May 2014 52.222-8 Payrolls and Basic Records. Jul 2021 52.222-9 Apprentices and Trainees. Jul 2005 52.222-10 Compliance with Copeland Act Requirements. Feb 1988 52.222-11 Subcontracts (Labor Standards). May 2014 52.222-12 Contract Termination-Debarment. May 2014 52.222-13 Compliance with Construction Wage Rate Requirements and Related Regulations. May 2014 52.222-14 Disputes Concerning Labor Standards. Feb 1988 52.222-15 Certification of Eligibility. May 2014 52.222-21 Prohibition of Segregated Facilities. Apr 2015 52.222-26 Equal Opportunity. Sep 2016 52.222-27 Affirmative Action Compliance Requirements for Construction. Apr 2015

52.222-30 Construction Wage Rate Requirements-Price Adjustment (None or Separately Specified Method).

Aug 2018

52.222-35 Equal Opportunity for Veterans. Jun 2020 52.222-36 Equal Opportunity for Workers with Disabilities. Jun 2020 52.222-37 Employment Reports on Veterans. Jun 2020 52.222-50 Combating Trafficking in Persons. Nov 2021 52.222-54 Employment Eligibility Verification. Nov 2021 52.222-55 Minimum Wages for Contractor Workers Under Executive Order 14026. Jan 2022 52.222-62 Paid Sick Leave Under Executive Order 13706. Jan 2022 52.223-5 Pollution Prevention and Right-to-Know Information. May 2011 52.223-5 Alternate I Pollution Prevention and Right-to-Know Information. - (Alternate I) May 2011 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving. Jun 2020 52.223-19 Compliance with Environmental Management Systems. May 2011 52.223-21 Foams. Jun 2016 52.225-13 Restrictions on Certain Foreign Purchases. Feb 2021 52.228-2 Additional Bond Security. Oct 1997 52.228-5 Insurance-Work on a Government Installation. Jan 1997 52.228-11 Individual Surety-Pledge of Assets. Feb 2021 52.228-12 Prospective Subcontractor Requests for Bonds. May 2014 52.228-14 Irrevocable Letter of Credit. Nov 2014 52.229-3 Federal, State, and Local Taxes. Feb 2013 52.229-12 Tax on Certain Foreign Procurements. Feb 2021 52.232-17 Interest. May 2014

52.232-23 Assignment of Claims. May 2014 52.232-29 Terms for Financing of Purchases of Commercial Products and Commercial Services. Nov 2021 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Nov 2021 52.233-1 Disputes. May 2014 52.233-3 Protest after Award. Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004 52.236-2 Differing Site Conditions. Apr 1984 52.236-3 Site Investigation and Conditions Affecting the Work. Apr 1984 52.236-5 Material and Workmanship. Apr 1984 52.236-6 Superintendence by the Contractor. Apr 1984 52.236-7 Permits and Responsibilities. Nov 1991 52.236-8 Other Contracts. Apr 1984

52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

Apr 1984

52.236-10 Operations and Storage Areas. Apr 1984 52.236-11 Use and Possession Prior to Completion. Apr 1984 52.236-12 Cleaning Up. Apr 1984 52.236-13 Accident Prevention. Nov 1991 52.236-15 Schedules for Construction Contracts. Apr 1984 52.236-17 Layout of Work. Apr 1984 52.236-21 Specifications and Drawings for Construction. Feb 1997 52.242-13 Bankruptcy. Jul 1995 52.242-14 Suspension of Work. Apr 1984 52.243-1 Alternate I Changes-Fixed-Price. - (Alternate I) Aug 1987 52.243-4 Changes. Jun 2007 52.244-6 Subcontracts for Commercial Products and Commercial Services. Jan 2022 52.245-1 Government Property. Sep 2021 52.245-1 Alternate I Government Property. (Alternate I) Sep 2021 52.245-9 Use and Charges. Apr 2012 52.247-5 Familiarization with Conditions. Apr 1984 52.247-15 Contractor Responsibility for Loading and Unloading. Apr 1984 52.247-16 Contractor Responsibility for Returning Undelivered Freight. Apr 1984 52.247-68 Report of Shipment (REPSHIP). Feb 2006 52.249-2 Termination for Convenience of the Government (Fixed-Price). Apr 2012 52.249-2 Alternate I Termination for Convenience of the Government (Fixed-Price). - (Alternate I) Apr 2012 52.249-10 Default (Fixed-Price Construction). Apr 1984 52.249-14 Excusable Delays. Apr 1984

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011

252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-Related Felonies.

Dec 2008

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Sep 2013 252.203-7003 Agency Office of the Inspector General. Aug 2019 252.203-7004 Display of Hotline Posters. Aug 2019 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. Dec 2019 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. May 2016

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2021

252.204-7022 Expediting Contract Closeout. May 2021 252.205-7000 Provision of Information to Cooperative Agreement Holders. Dec 1991

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

252.211-7007 Reporting of Government-Furnished Property. Aug 2012 252.222-7006 Restrictions on the Use of Mandatory Arbitration Agreements. Dec 2010 252.223-7004 Drug-Free Work Force. Sep 1988 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. Sep 2014 252.223-7008 Prohibition of Hexavalent Chromium. Jun 2013 252.225-7048 Export-Controlled Items. Jun 2013

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

Apr 2019

252.232-7010 Levies on Contract Payments. Dec 2006

252.232-7017 Accelerating Payments to Small Business Subcontractors-Prohibition on Fees and Consideration.

Apr 2020

252.243-7001 Pricing of Contract Modifications. Dec 1991 252.243-7002 Requests for Equitable Adjustment. Dec 2012

252.244-7000 Subcontracts for Commercial Items. Oct 2020 252.245-7002 Reporting Loss of Government Property Jan 2021 252.245-7003 Contractor Property Management System Administration Apr 2012 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations. Oct 2010

FAR Clauses Incorporated by Full Text

52.204-1 Approval of Contract. Dec 1989

As prescribed in , insert the following clause:4.103

APPROVAL OF CONTRACT (DEC 1989)

This contract is subject to the written approval of The Contracting Officer, Ranada Lowe and shall not be binding until so approved.

(End of clause)

52.211-10 Commencement, Prosecution, and Completion of Work. Apr 1984

As prescribed in 11.404(b), insert the following clause in solicitations and contracts when a fixed-price construction contract is contemplated. The clause may be changed to accommodate the issuance of orders under indefinite-delivery contracts for construction.

COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK (APR 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 250.

* The time stated for completion shall include final cleanup of the premises.

* The Contracting Officer shall specify either a number of days after the date the contractor receives the notice to proceed, or a calendar date.

(End of clause)

52.211-12 Liquidated Damages-Construction. Sep 2000

As prescribed in , insert the following clause in solicitations and contracts:11.503(b)

LIQUIDATED DAMAGES-CONSTRUCTION (SEPT 2000)

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount of $441.40 for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor's right to proceed, liquidated damages will continue to accrue until the work is completed.

These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

(End of clause)

52.216-18 Ordering. Aug 2020

As prescribed in , insert the following clause:16.506(a)

ORDERING (AUG 2020)

Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the(a) individuals or activities designated in the Schedule. Such orders may be issued from through award date specified in the contract end of contract [insert dates].

All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or(b) task order and this contract, the contract shall control.

A delivery order or task order is considered "issued" when-(c)

If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;(1)

If sent by fax, the Government transmits the order to the Contractor's fax number; or(2)

If sent electronically, the Government either-(3)

Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor; or(i)

Distributes the delivery order or task order via email to the Contractor's email address.(ii)

Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract.(d)

(End of clause)

52.216-19 Order Limitations. Oct 1995

As prescribed in , insert a clause substantially the same as follows:16.506(b)

ORDER LIMITATIONS (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $500.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor-

(1) Any order for a single item in excess of $5,000,000.;

(2) Any order for a combination of items in excess of 1,000,000.; or

(3) A series of orders from the same ordering office within 30 workdays days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section.

If this is a requirements contract ( includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation(c) i.e., (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in(d) paragraph (b), unless that order (or orders) is returned to the ordering office within days after issuance, with written notice stating the 30 workdays Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

52.216-22 Indefinite Quantity. Oct 1995

As prescribed in , insert the following clause:16.506(e)

INDEFINITE QUANTITY (OCT 1995)

This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The(a) quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall(b) furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum."

(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after completion of all task orders issued during the contract ordering period or after 15 October, 2026.

52.217-9 Option to Extend the Term of the Contract. Mar 2000

As prescribed in , insert a clause substantially the same as the following:17.208(g)

OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 calendar days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 calendar days days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed four years.

(End of clause)

52.219-14 Limitations on Subcontracting. Sep 2021

As prescribed in , insert the following clause:19.507(e)

LIMITATIONS ON SUBCONTRACTING (SEP 2021)

This clause does not apply to the unrestricted portion of a partial set-aside.(a)

, as used in this clause, means a first-tier subcontractor, including an independent contractor, that-(b) Definition. Similarly situated entity

Has the same small business program status as that which qualified the prime contractor for the award ( , for a small business set-(1) e.g.

aside contract, any small business concern, without regard to its socioeconomic status); and

Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor(2) assigned to the subcontract.

This clause applies only to-(c) Applicability.

Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);(1)

Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);(2)

Contracts that have been awarded on a sole-source basis in accordance with subparts 19.8, 19.13, 19.14, and 19.15;(3)

Orders expected to exceed the simplified acquisition threshold and that are-(4)

Set aside for small business concerns under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or(i)

Issued directly to small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii);(ii)

Orders, regardless of dollar value, that are-(5)

Set aside in accordance with subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 8.405-5 and 16.505(i) (b)(2)(i)(F); or

Issued directly to concerns that qualify for the programs described in subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award(ii) contracts, as described in 19.504(c)(1)(ii); and

Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the(6) evaluation preference.

An independent contractor shall be considered a subcontractor.(d) Independent contractors.

By submission of an offer and execution of a contract, the Contractor agrees that in performance of a(e) Limitations on subcontracting.

contract assigned a North American Industry Classification System (NAICS) code for-

Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to(1) subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;

Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by(2) the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the(3) cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or

Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract(4) performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.

The Contractor shall comply with the limitations on subcontracting as follows:(f)

For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause-(1)

By the end of the base term of the contract and then by the end of each subsequent option period; or

By the end of the performance period for each order issued under the contract.

For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.(2)

A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be(g) performed by the aggregate of the joint venture participants.

(End of clause)

52.219-28 Post-Award Small Business Program Rerepresentation. Sep 2021

As prescribed in , insert the following clause:19.309(c)(1)

POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (SEP 2021)

. As used in this clause-(a) Definitions means a contract of more than five years in duration, including options. However, the term does not include contracts that Long-term contract exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

-Small business concern

Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is(1) bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (d) of this clause.