Attach_1_-_Appendix_D(2c)_Hangar_Doors_O&M.pdf

These limit switches have SPDT momentary contacts, internal screw terminal connections, and are UL listed. The roller lever and rod style actuators can be rotated 360° (in 90° increments) for additional mounting options.

These limit switches are ideal where mounting space is limited. Rated 5 amps @ 250 VAC. Housing is gasketed die cast zinc with a plastic cover and rated IP64 for protection against splashing liquids. Switches have a 0.25" dia.

opening with a cord grip fitting for wiring, and come with mounting hardware.

Type Adjustable Roller Lever

Actuation Force 340 g./12.0 oz.

Voltage 250 VAC/125 VDC

Amps 5

Actuator Height 1.9” - 3.5”

NEMA Rating 4/ IP64

Item # 7988K2

Operating Decibels @ Model Voltage Current 10' 1m

BELLS

A4 – – 98 108 A6 – – 100 110 A10 – – 102 112

VIBRATING MECHANISMS

500 24VAC 0.4 amps – – 500 120VAC 0.08 amps – – 500 240VAC 0.04 amps – – 600 12VDC 0.8 amps – – 600 24VDC 0.4 amps – – 600 125VDC 0.08 amps – – 600 250VDC 0.03 amps – –

DESIGNED FOR GENERAL

ALARM OR PAGING

• Vibrating mechanism

• Three gong sizes – four, six, or ten-inch

• A range of output available – 98-102dBa @ 10' (108-112dBa @ 1m)

• Optional weatherproof backbox provides Type 3R enclosure

• UL and cUL Listed, CSA Certified and FM Approved

Vibratone ® Bells

Models A4, A6 and A10 Models 500 and 600

Federal Signal’s Vibratone® heavy duty bell product line utilizes a modular approach to combine gongs and mechanisms allowing for greater flexibility and selection. Three gong sizes are available; the Model A4 is four inches in diameter; the Model A6 is six inches in diameter; and the Model A10 is ten inches in diameter. Each larger gong produces a different tone and a higher dBa output.

Vibrating bells produce a continuous ringing sound when voltage is applied. The Models 500 and 600 vibrating mechanisms are designed for AC and DC operation, respectively.

The Models 500 and 600 are UL and cUL Listed, CSA Certified and FM Approved.

Federal Signal’s Vibratone bells can be used in any industrial application, whether to signal danger or for start and dismissal.

A variety of mounting accessories will accommodate almost any environment.

FEDERAL SIGNAL CORPORATION

5yr5555y W A R R A N T Y

A4 – – 98 108

500 120VAC 0.08 amps – –

VIBRATONE® BELLS (A4/A6/A10/500/600)

2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Fax: 708.534.4852 www.federalsignal-indust.com

H O W T O O R D E R

• Specify mechanism model and voltage, and gong model

• Specify options from list

• Please refer to Model Number

Index A4/A6/A10/500/600 beginning on page 378

Model A6 (6" Gong) with Mechanism

Back View Side View Mechanisms Mechanisms

6"/

152.4 mm

2.13"/

54.1 mm

4"/

101.6 mm

4"/

101.6 mm

S P E C I F I C AT I O N S

Net Shipping

Model Weight Weight Height Width Depth 500 1.0 lb. 1.1 lb. 4.0" 4.0" 2.125"

0.45 kg 0.4 kg 101.6 mm 101.6 mm 54.0 mm

600 1.0 lb. 1.1 lb. 4.0" 4.0" 2.125"

0.45 kg 0.4 kg 101.6 mm 101.6 mm 54.0 mm

A4 0.5 lb. 0.7 lb. 4.0" 4.0" 1.25"

0.23 kg 0.32 kg 101.6 mm 101.6 mm 31.8 mm

A6 1.0 lb. 1.2 lb. 6.0" 6.0" 1.75"

0.45 kg 0.54 kg 152.4 mm 152.4 mm 44.5 mm

A10 3.5 lbs. 4.0 lbs. 10.0" 10.0" 2.25"

1.59 kg 1.8 kg 254.0 mm 254.0 mm 57.2 mm

O P T I O N S FB Deep back box for flush mounting A4 gong with any mechanism FBL Extra deep back box for flush mounting A4 gong with any mechanism FG Grille for flush mounting A4 gong and any mechanism in FB back box NB 4” back box for interior mounting NBL Large interior back box for interior mounting SF Surface mounting plate for plastered-in 4” boxes WB Weatherproof back box

S P E C I F I C AT I O N S

500 1.0 lb. 1.1 lb. 4.0" 4.0" 2.125"

0.45 kg 0.4 kg 101.6 mm 101.6 mm 54.0 mm

A4 0.5 lb. 0.7 lb. 4.0" 4.0" 1.25"

0.23 kg 0.32 kg 101.6 mm 101.6 mm 31.8 mm

D.P. Industries, Inc. Bottom Edge Weather-strip Seal with Retainer Bar provides an excellent weather resistant seal for your hangar door system. This weather resistant seal is made of 1/8”, 2 ply cloth inserted neoprene weather-strip. Neoprene is suitable for applications whose temperature range is between -30 to +200 Deg. F. The neoprene weather-strip is bolt mounted to structural steel channel retainer bar using Buildex heavy duty TEKS self drilling fasteners. Allowing for up to 4” of surface variation, while still ensuring a weather resistant seal. The weather-strip seals to the floor and will prevent negative or positive air flow under the door.

Please note: Custom weather-strip options are available for applications exceeding –30 or +200 Deg. F. Please call for more information.

16 Kit Kat Rd Mound House NV 89706 E-Mail: doors@dpindustries.com Toll Free (800) 411-8996 Phone (775) 246-9011 Fax (775) 246-9010

CUSTOM DOOR SYSTEMS

Weather-Strip Seal with Retainer Bar

Please Note: All drawings, pictures, representations and related information are proprietary and are the property of D.P. Industries, Inc. Distribution or sharing is strictly prohibited.

D.P. Industries, Inc.

Leading Edge Bubble

Weather-strip Seal w/Retainer Bar

The Leading edge bubble weather-strip w/retainer bar provides an excellent weather resistant seal for your hangar door system. This weather resistant seal is made of 1/8”, 2 ply cloth inserted neoprene weather-strip.

Bubble seal neoprene is suitable for applications whose temperature range is between -30 to +200 Deg. F. The neoprene weather-strip is bolt or weld mounted to structural steel channel bar or angle iron using Buildex heavy duty

TEKS self drilling fasteners and structural steel channel retainer bar.

Allowing for up to 4” of surface variation, while still ensuring a weather resistant seal.

Please note:

Custom weather-strip options are available. Available options include; applications exceeding –30 or +200 Deg. F, applications needing thinner/thicker and narrow/ wider weather-strip. Please call D.P.

Industries, Inc. for more information..

Leading Edge Bubble Weather-strip Seal w/Retainer bar at Center of Doors

16 Kit Kat Rd Mound House, NV 89706 E-Mail: doors@dpindustries.com Toll Free (800) 411-8996 Phone (775) 246-9011 Fax (775) 246-9010

CUSTOM DOOR SYSTEMS

Please Note: All drawings, pictures, representations and related information are proprietary and are the property of D.P. Industries, Inc. Distribution or sharing is strictly prohibited.

All wheels are cut from the finest domestic A-36

Steel Plate. Precision machined to meet strict quality control tolerances of less than .001. Timken tapered roller bearing are used on all wheels to ensure easy rolling and a long life. Bearing capacity is approximately 7,500 lbs. each for a total wheel capacity of 15,000 lbs. Flanged wheels fit rail with a tolerance of 1/8”.

Steel sprockets are precision machined from the finest domestic A-36 Steel Plate to fit ANST roller chains. Sprockets are then welded to the wheel hubs with a precision automated wire feed welder.

Drive and Idler Wheels for Aircraft Hangar Door

16 Kit Kat Rd, Mound House, NV. 89706 E-Mail: doors@dpindustries.com Toll Free (800)411-8996 Phone (775) 246-9011 Fax (775) 246-9010

CUSTOM DOOR SYSTEMS

Tapered Roller Bearing Assembly, 2” x 3-1/4”

Cone Number LM104949

Bearing Style Assembly

Inside Diameter 2”

Bearing Material Steel

Precision Class Standard (2)

Rows Single

Bearing Element Type Tapered Roller

Cup Number LM104911

Outer Ring Feature Assembly

Bore Type Round

Outside Diameter 3.25”

Part # Set38 900SA

Manufacturer The Timken Company

Dimensions, mm (inches) Load Ratings, N (lbf.)

Dynamic (1) Factors (5) Dynamic (2) Factors (5) Static Part Number d D T C1 e Y C90 Ca90 K C0 Inner Outer

TS

SINGLE-ROW

(1) Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.

(2) Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.

(3) Negative value indicates effective center inside cone backface.

(4) These maximum fillet radii will be cleared by the bearing corners.

(5) These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.

ROLLER BEARINGS

B

T C

D dB a

• B86 TIMKEN PRODUCTS CATALOG

50.000 105.000 32.000 111000 0.87 0.69 28700 42500 0.67 138000 JW5049 JW5010

1.9685 4.1339 1.2598 24900 6440 9560 31000

50.000 105.000 37.000 159000 0.49 1.23 41200 34400 1.20 223000 JHM807045 JHM807012

1.9685 4.1339 1.4567 35700 9260 7730 50200

50.800 77.788 12.700 34600 0.34 1.78 8960 5160 1.74 47200 LL205449 LL205410

2.0000 3.0625 0.5000 7770 2010 1160 10600

50.800 80.962 18.258 56300 0.36 1.69 14600 8880 1.64 88800 L305649 L305610

2.0000 3.1875 0.7188 12700 3280 2000 20000

50.800 82.000 21.976 75200 0.31 1.97 19500 10200 1.91 104000 LM104949 JLM104910

2.0000 3.2283 0.8652 16900 4390 2290 23400

50.800 82.550 21.590 75200 0.31 1.97 19500 10200 1.91 104000 LM104949 LM104911

2.0000 3.2500 0.8500 16900 4390 2290 23400

50.800 82.550 23.622 75200 0.31 1.97 19500 10200 1.91 104000 LM104949 LM104911A

2.0000 3.2500 0.9300 16900 4390 2290 23400

50.800 82.931 21.590 75200 0.31 1.97 19500 10200 1.91 104000 LM104949 LM104912

2.0000 3.2650 0.8500 16900 4390 2290 23400

50.800 83.312 17.462 50600 0.41 1.48 13100 9110 1.44 67500 18790 18721

2.0000 3.2800 0.6875 11400 2950 2050 15200

50.800 85.000 17.462 50600 0.41 1.48 13100 9110 1.44 67500 18790 18720

2.0000 3.3465 0.6875 11400 2950 2050 15200

50.800 85.725 19.050 47800 0.57 1.06 12400 12000 1.03 63900 18200 18337

2.0000 3.3750 0.7500 10700 2780 2710 14400

50.800 88.900 17.462 50600 0.41 1.48 13100 9110 1.44 67500 18790 18724

2.0000 3.5000 0.6875 11400 2950 2050 15200

50.800 88.900 20.638 50600 0.41 1.48 13100 9110 1.44 67500 18790 18723

2.0000 3.5000 0.8125 11400 2950 2050 15200

50.800 88.900 20.638 79500 0.32 1.88 20600 11300 1.83 95800 368 362A

2.0000 3.5000 0.8125 17900 4640 2540 21500

50.800 88.900 20.638 79500 0.32 1.88 20600 11300 1.83 95800 368A 362A

2.0000 3.5000 0.8125 17900 4640 2540 21500

50.800 88.900 20.638 79500 0.32 1.88 20600 11300 1.83 95800 370A 362A

2.0000 3.5000 0.8125 17900 4640 2540 21500

50.800 88.900 23.812 79500 0.32 1.88 20600 11300 1.83 95800 368A 362AX

2.0000 3.5000 0.9375 17900 4640 2540 21500

50.800 89.980 24.750 91600 0.38 1.59 23700 15300 1.55 130000 28580 28520

2.0000 3.5425 0.9744 20600 5340 3450 29200

50.800 90.000 20.000 79500 0.32 1.88 20600 11300 1.83 95800 368 362

2.0000 3.5433 0.7874 17900 4640 2540 21500

50.800 90.000 20.000 79500 0.32 1.88 20600 11300 1.83 95800 368 363

2.0000 3.5433 0.7874 17900 4640 2540 21500

50.800 90.000 20.000 79500 0.32 1.88 20600 11300 1.83 95800 368A 362

2.0000 3.5433 0.7874 17900 4640 2540 21500

50.800 90.000 20.000 79500 0.32 1.88 20600 11300 1.83 95800 370A 362

2.0000 3.5433 0.7874 17900 4640 2540 21500

50.800 92.075 24.608 91600 0.38 1.59 23700 15300 1.55 130000 28580 28521

2.0000 3.6250 0.9688 20600 5340 3450 29200

50.800 92.075 27.780 91600 0.38 1.59 23700 15300 1.55 130000 28580 28523

2.0000 3.6250 1.0937 20600 5340 3450 29200

50.800 93.264 20.638 81400 0.34 1.77 21100 12200 1.73 101000 375 374

2.0000 3.6718 0.8125 18300 4750 2750 22700

50.400 93.264 20.638 81400 0.34 1.77 21100 12200 1.73 101000 375-S 374

2.0000 3.6718 0.8125 18300 4750 2750 22700

50.800 93.264 26.988 81400 0.34 1.77 21100 12200 1.73 101000 375 3720

2.0000 3.6718 1.0625 18300 4750 2750 22700

50.800 93.264 26.988 81400 0.34 1.77 21100 12200 1.73 101000 375 3730

2.0000 3.6718 1.0625 18300 4750 2750 22700

Dimensions, mm (inches) Factors Weight Bearing Shaft Housing Cage kg (lbs.)

max shaft backing backing backing fillet radius shoulder dia. shoulder dia. shoulder dia.

B C a(3) R(4) da db r (4) Da Db Aa Ab G1 G2 Cg

(6) For standard class (4 or 2) only, the maximum metric value is a whole millimeter dimension.

(7) Compound radius on inner race. Details on drawing for bearing.

(8) Pin-type cage. Please consult The Timken Company.

Continued on next page.

Tapered - Type TS

B

• TIMKEN PRODUCTS CATALOG B87

29.000 22.000 4.3 3.0 60.0 76.0 3.0 100.0 86.0 4.90 3.60 39 14.6 0.1105 1.23

1.1417 0.8661 0.17 0.12 2.36 2.99 0.12 3.94 3.39 0.19 0.14 2.72

36.000 29.000 -7.6 3.0 63.0 69.0 2.5 100.0 90.0 3.60 2.60 63.9 17.1 0.0760 1.49

1.4173 1.1417 -0.30 0.12 2.48 2.72 0.10 3.94 3.54 0.14 0.10 3.28

12.700 9.525 0.0 1.5 55.0 57.0 1.5 74.0 71.0 0.20 1.70 24.2 29.1 0.0699 0.20

0.5000 0.3750 0.00 0.06 2.17 2.24 0.06 2.91 2.80 0.01 0.07 0.45

18.258 14.288 -2.5 1.5 56.0 58.0 1.5 77.0 73.0 0.30 1.90 38.8 27.8 0.0841 0.35

0.7188 0.5625 -0.10 0.06 2.20 2.28 0.06 3.03 2.87 0.01 0.08 0.77

22.225 17.000 -5.8 3.5 56.0 63.0 0.5 78.0 76.0 1.20 2.00 38.8 19.3 0.0801 0.42

0.8750 0.6693 -0.23 0.14 2.20 2.48 0.02 3.07 2.99 0.05 0.08 0.93

22.225 16.510 -5.8 3.5 56.0 63.0 1.3 78.0 75.0 1.20 2.00 38.8 19.3 0.0801 0.42

0.8750 0.6500 -0.23 0.14 2.20 2.48 0.05 3.07 2.95 0.05 0.08 0.93

22.225 18.542 -5.8 3.5 56.0 63.0 0.8 78.0 75.0 1.20 2.00 38.8 19.3 0.0801 0.45

0.8750 0.7300 -0.23 0.14 2.20 2.48 0.03 3.07 2.95 0.05 0.08 0.99

22.225 16.510 -5.8 3.5 56.0 63.0 1.3 77.5 75.0 1.20 2.00 38.8 19.3 0.0801 0.43

0.8750 0.6500 -0.23 0.14 2.20 2.48 0.05 3.06 2.95 0.05 0.08 0.95

17.462 13.495 -0.8 3.5 56.0 62.0 0.8 79.0 77.0 0.80 1.50 28.6 21.5 0.0789 0.34

0.6875 0.5313 -0.03 0.14 2.20 2.44 0.03 3.11 3.03 0.03 0.06 0.76

17.462 13.495 -0.8 3.5 56.0 62.0 1.5 80.0 77.0 0.80 1.50 28.6 21.5 0.0789 0.37

0.6875 0.5313 -0.03 0.14 2.20 2.44 0.06 3.15 3.03 0.03 0.06 0.81

18.263 12.700 2.0 1.5 56.0 59.0 1.5 81.0 76.0 * * 26.1 20.3 0.0852 0.40

0.7190 0.5000 0.08 0.06 2.20 2.32 0.06 3.19 2.99 * * 0.88

17.462 13.495 -0.8 3.5 56.0 62.0 1.3 82.0 78.0 0.80 1.50 28.6 21.5 0.0789 0.42

0.6875 0.5313 -0.03 0.14 2.20 2.44 0.05 3.23 3.07 0.03 0.06 0.93

17.462 16.670 -0.8 3.5 56.0 62.0 1.3 82.0 78.0 0.80 1.50 28.6 21.5 0.0789 0.48

0.6875 0.6563 -0.03 0.14 2.20 2.44 0.05 3.23 3.07 0.03 0.06 1.06

22.225 16.513 -4.3 1.5 56.0 58.0 1.3 84.0 81.0 0.50 1.00 33.8 14 0.0773 0.51

0.8750 0.6501 -0.17 0.06 2.20 2.28 0.05 3.31 3.19 0.02 0.04 1.12

22.225 16.513 -4.3 3.5 56.0 62.0 1.3 84.0 81.0 0.40 1.10 33.8 12.7 0.0773 0.50

0.8750 0.6501 -0.17 0.14 2.20 2.44 0.05 3.31 3.19 0.02 0.04 1.10

22.225 16.513 -4.3 5.0 56.0 65.0 1.3 84.0 81.0 0.50 1.00 33.8 14 0.0773 0.49

0.8750 0.6501 -0.17 0.20 2.20 2.56 0.05 3.31 3.19 0.02 0.04 1.08

22.225 19.688 -4.3 3.5 56.0 62.0 1.3 84.0 80.0 0.40 1.10 33.8 12.7 0.0773 0.55

0.8750 0.7751 -0.17 0.14 2.20 2.44 0.05 3.31 3.15 0.02 0.04 1.21

25.400 19.987 -4.8 3.5 57.0 63.0 2.3 86.0 81.0 1.40 1.00 46.4 22.6 0.0912 0.66

1.0000 0.7869 -0.19 0.14 2.24 2.48 0.09 3.39 3.19 0.06 0.04 1.45

22.225 15.875 -4.3 1.5 56.0 58.0 2.0 84.0 81.0 0.50 1.00 33.8 14 0.0773 0.52

0.8750 0.6250 -0.17 0.06 2.20 2.28 0.08 3.31 3.19 0.02 0.04 1.14

22.225 20.000 -4.3 1.5 56.0 58.0 0.8 85.0 82.0 0.50 1.00 33.8 14 0.0773 0.55

0.8750 0.7874 -0.17 0.06 2.20 2.28 0.03 3.34 3.23 0.02 0.04 1.21

22.225 15.875 -4.3 3.5 56.0 62.0 2.0 84.0 81.0 0.40 1.10 33.8 12.7 0.0773 0.51

0.8750 0.6250 -0.17 0.14 2.20 2.44 0.08 3.31 3.19 0.02 0.04 1.12

22.225 15.875 -4.3 5.0 56.0 65.0 2.0 84.0 81.0 0.50 1.00 33.8 14 0.0773 0.50

0.8750 0.6250 -0.17 0.20 2.20 2.56 0.08 3.31 3.19 0.02 0.04 1.10

25.400 19.845 -4.8 3.5 57.0 63.0 0.8 87.0 83.0 1.40 1.00 46.4 22.6 0.0912 0.71

1.0000 0.7813 -0.19 0.14 2.24 2.48 0.03 3.43 3.27 0.06 0.04 1.56

25.400 23.017 -4.8 3.5 57.0 63.0 2.3 87.0 81.0 1.40 1.00 46.4 22.6 0.0912 0.76

1.0000 0.9062 -0.19 0.14 2.24 2.48 0.09 3.43 3.19 0.06 0.04 1.67

22.225 15.083 -3.8 2.3 57.0 60.0 1.3 88.0 85.0 0.80 1.40 37.6 15.4 0.0816 0.59

0.8750 0.5938 -0.15 0.09 2.24 2.36 0.05 3.46 3.35 0.03 0.06 1.31

22.225 15.083 -3.8 3.5 57.0 63.0 1.3 88.0 85.0 0.80 1.40 37.6 15.4 0.0816 0.59

0.8750 0.5938 -0.15 0.14 2.24 2.48 0.05 3.46 3.35 0.03 0.06 1.30

22.225 23.812 -3.8 2.3 57.0 60.0 3.3 88.0 82.0 0.80 1.40 37.6 15.4 0.0816 0.70

0.8750 0.9375 -0.15 0.09 2.24 2.36 0.13 3.46 3.23 0.03 0.06 1.55

22.225 23.812 -3.8 2.3 57.0 60.0 0.8 88.0 84.0 0.80 1.40 37.6 15.4 0.0816 0.72

0.8750 0.9375 -0.15 0.09 2.24 2.36 0.03 3.46 3.31 0.03 0.06 1.58

08 34 16.10 O&M Data-Lubrication

Product Features

Unique double fluted point has precise cutting edges to improve drill performance in 1/4'' thru 1/2'' steel.

Engineered for fast drilling and smooth tapping with less effort.

Climaseal® finish provides excellent corrosion resistance and lower tapping torque.

Attachments up to 7.2'' of material including 1/2'' steel.

1/4 Diameter has notched threads to reduce tapping torque.

First in performance!! Over 30 years of consistent drilling.

The original self-drillers for heavy duty applications.

TEKS ®

Self-Drilling Fasteners

Product Specifications

Diameter #12, 1/4 Thread Form 12-24, 1/4-28 Head Style #12: 5/16'' HWH

1/4: 5/16'' HWH

1/4: 3/8'' HWH

Drill Point Teks 4 Teks 4.5 Teks 5

Finish Climaseal

Head Style Hex Washer Head

Approvals and Listings Factory Mutual (J.I. 2 X 9A2 AM), ICBO 3056

ICC - ESR 1976

Applications

Metal deck to structural steel or bar joist.

Clips to structural steel or bar joist.

Liner panels to structural steel or bar joist.

Accessories to structural steel or bar joist.

Longer length fasteners can be used in retrofit clip and sheet applications.

Approvals and Listings Factory Mutual (J.I. 2 X 9A2 AM), ICBO 3056, ICC - ESR 1976

H E

AV

Y

D U

TY

S

TE

E

L -T

O

- S

TE

E

L A

P P

LIC

ATIO

N S

P R

O D

U C

T R

E P

O R

T N

O.02703

Dia. Pt.

4.5

3/16

1/4

Fastener Steel Gauge Pullout Values (average lbs. ultimate)

1/4

Note: Teks fasteners are not categorized as structural bolts. Proper design criteria and strengths must be used for satisfactory application.The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fas-teners only. Appropriate safety factors should be applied to these values for design pur-poses.

TEKS SELF-DRILLING FASTENERS

Selector Guide

Part Head Drill Drill & Tap Max. Material Box Number Description Style Point Capacity Attachment Qty Applications 1088000 12-24 x 7/8'' HWH #4 .125-.250 .325 5,000 1414000 12-24 x 1-1/4'' HWH #4.5 .125-.375 .575 4,000 1006000 12-24 x 1-1/4'' HWH #5 .125-.500 .375 4,000 1070000 12-24 x 1-1/2'' HWH #5 .125-.500 .625 2,500 1072000 12-24 x 2'' HWH #5 .125-.500 1.125 2,000 1074000 1/4-28 x 3'' *HWH #5 .125-.500 2.150 1,000 1075000 1/4-28 x 4'' *HWH #5 .125-.500 3.150 500 1641000 1/4-28 x 5'' HWH #5 .125-.500 4.150 250 1431000 1/4-28 x 6" HWH #5 .125-.500 5.150 250 1590000 1/4-28 x 8" HWH #5 .125-.500 7.150 150

Performance Data

Dia. Pt.

4.5

1/8

1/4

Fastener Steel Gauge (lapped) Shear Values (average lbs. ultimate)

Fastener (dia-tpi)

12-24 T/4 12-24 T/4.5 12-24 T/5 1/4-28 T/5

Tensile (lbs. min.)

Shear (avg. lbs. ult.)

Torque (min. in. lbs.)

Fastener Values 12

1/4

.105''

.075''

.060''

.048''

.036''

.030''

.024''

.018''

Gauge No.

Decimal Equivalent

Sheet Steel Gauges

A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2500. (Maximum 1800 RPM is recommended for Teks 5 fasteners)

Adjust the screwgun nosepiece to properly seat the fastener.

New magnetic sockets must be correctly set before use.

Remove chip build-up as needed.

The fastener is fully seated when the head is flush with the work surface.

Overdriving may result in torsional failure of the fastener or stripout of the substrate.

The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

Teks® and Climaseal® are trademarks of ITW Buildex and Illinois Tool Works, Inc.

© 2007 ITW Buildex and Illinois Tool Works, Inc.

Product Report No. 02703

• Metal deck, clips, liner panels or accessories to structural steel or bar joist.

• Longer fasteners can be used in retrofit clip and sheet applications.

* 5/16” Across Flats HWH.

1349 West Bryn Mawr Avenue Itasca, Illinois 60143 630-595-3500 Fax: 630-595-3549 www.itwbuildex.com

All available with bonded washer.

Installation Guidelines