Atch 8 Solicitation Questions and Answers.pdf

DEPARTMENT OF THE AIR FORCE

90TH MISSILE WING (AFGSC)

21 Dec 2023

MEMORANDUM FOR 90 CES/CEM

FROM: 90 CONS/PKAB

SUBJECT: Solicitation Questions for GHLN 24-1256 Maintain Radio Towers, FA461324Q0001

Q1: Are you able to provide photographs of the tower at the Facility 3656 location?

Govt Answer: See attachment 1

Q2: Are you able to provide the height and model of the tower at the Facility 3656 location?

Govt Answer: All Towers are a Rohn SSV. Tower 3565 is 209’ tall.

Q3: In the 04 – Metals section of the Description of Service Requirements section B, it states that the contractor shall replace six (6) rusted/corroded bulb sockets with new, in kind, sockets. Can you please provide the specifications for the bulb sockets?

Govt Answer: Refer to pages 4-22 of this document.

Q4: In the 06 – Electrical section of the Description of Service Requirements section A 1., it states that the bulbs shall be the same make and type of the existing bulbs or equal. Can you please provide details of the existing bulbs?

Govt Answer: Refer to pages 4-22 of this document.

Q5: What are the types (monopole, self-support, etc.) of each tower?

Govt Answer: All Towers are a Rohn SSV.

Q6: What are the heights of each tower?

Govt Answer: B-01 is 205'; D-01 is 188'; G-01 is 168'; L-01 is 205'; O-01 is 205'; 3656 is 209'.

Q7: What are the types of bulbs installed and required to swap at each tower?

Govt Answer: Refer to pages 4-22 of this document.

Q8: Confirm the bid date and time listed above are unchanged.

Govt Answer: Solicitation response deadline extended to January 11th at 2:00 pm MST (Mountain Standard Time), refer to Amendment 01 issued 27 Dec 2023.

Q9: Construction cost estimate or a construction cost range for the project.

Govt Answer: This requirement is not a construction. It is considered a service, therefore, no magnitude is given.

Q10: Planholders list/bidders list and Non-Mandatory pre-bid attendance list:

Govt Answer: The CUI drawings that were provided to bidders who have verified NIST SP-800 171 basic assessment and signed MFR UCNI Doc (refer to Attachments 4, 4a, 4b, 6, 7) will have details necessary to complete the offer. Site visit is not offered at this time.

Q11: Any addenda that have been released, please attach.

Govt Answer: Refer to solicitation posting. Amendment 01 released 27 Dec 2023 with corresponding changes.

Q12: Requesting requirement for NIST 800-171 related to this effort, to be removed from the RFP or an explanation be provided that identifies why it applies to this Scope of Work.

Govt Answer: Refer to DFARS 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. As prescribed in 204.2105 (c), use the following clause: PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE

TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2023)

Definitions. As used in this clause— “Covered defense telecommunications equipment or services” means—

(1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation, or any subsidiary or affiliate of such entities;

(2) Telecommunications services provided by such entities or using such equipment; or

(3) Telecommunications equipment or services produced or provided by an entity that the Secretary of Defense reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.

As of Jan 2023, requirements that have covered defense information, such as Controlled Unclassified Information (Drawings) in this project, require offerors to submit a verified basic assessment of NIST 800-171. If company was a subcontractor to a Prime, the Prime was responsible for providing a verifiable NIST SP 800-171.

Q13: The Period of Performance is identified as 60 calendar days. Unless there is another requirement which demands that the work be completed during the winter months, requesting that the performance period be revised to those months where there is less risk related to weather.

Govt Answer: Winter suspension will be allowed once contract is awarded. Period of Performance begins once the suspension has been lifted.

Q14: Given the need to resolve the above questions, we respectfully request that the Due Date for offers be extended a minimum of 7 days.

Govt Answer: Per Amendment 01, solicitation response deadline extended to January 11th at 2:00 pm MST (Mountain Standard Time).

MEGAN L. EVANS, Civ, DAF Contract Specialist

Atachment 1

Galvanized Rigid Conduit (GRC)

• Hot-dip galvanized for excellent corrosion resistance

• High strength ductile steel for long life and easy bending

• Smooth, continuous raceways for fast wire pulling

• Kwik-Release End Cap to protect threads

• True Color™ GRC special orders available

• Listed to Safety Standard UL 6

• Manufactured in accordance with ANSI C80.1

• Available in sizes 1/2 (16) - 6 (155)

Kwik-Couple Galvanized Rigid Conduit (GRC)

• Similar Benefits to standard GRC Conduit*

• Factory installed Kwik-Couple™ couplings are available on

GRC conduit Just line up the ends, spin the coupling forward onto the next piece and wrench tighten. It’s that easy!

• No separate couplings to purchase, inventory or install

• Kwik-Release End Cap to protect threads

• True Color™ Kwik-Couple® GRC special orders available

• Manufactured in accordance with ANSI C80.1

• Available in sizes 2 1/2 (63) - 5 (129) *Kwik-Couple GRC does not contain a listing for wet locations and is not approved for Class I Division I locations.

Chart on the following page

Galvanized Rigid Conduit (GRC) and Kwik-Couple® GRC in mm in mm lb kg ft m 1/2 16 0.840 21.34 0.104 2.64 82 37.2 2500 762.5 3/4 21 1.050 26.67 0.107 2.72 109 49.4 2000 610.0 1 27 1.315 33.40 0.126 3.20 161 73.0 1250 381.3 1 1/4 35 1.660 42.16 0.133 3.38 218 98.9 900 274.5 1 1/2 41 1.900 48.26 0.138 3.51 263 119.3 800 244.0 2 53 2.375 60.33 0.146 3.71 350 158.8 600 183.0 2 1/2 63 2.875 73.03 0.193 4.90 559 253.6 370 112.9 3 78 3.500 88.90 0.205 5.21 727 329.8 300 91.5 3 1/2 91 4.000 101.60 0.215 5.46 880 399.2 250 76.3 4 103 4.500 114.30 0.225 5.72 1030 467.2 200 61.0 5 129 5.563 141.30 0.245 6.22 1520 689.5 150 45.8 6 155 6.625 168.28 0.266 6.76 1785 809.7 100 30.5

Galvanized Rigid Conduit (GRC) Listed to UL 6, manufactured in accordance with ANSI C80.1

1 Tolerances: Trade Size 1/2 to 1-1/2: ±0.015” (0.38mm); Trade Size 2-6: ±1% Length equals 10 ft. (3.05m) with a tolerance of +/- .25 in. (6.35mm) 2 For information only. Not a requirement of the UL standard.

* NEMA RN-3 Standard

Quality, Long Lasting Heavy Duty Steel Conduit

For Faster Installations Use the Kwik-Couple GRC Connection

* U.S. Patent Numbers 7,404,582 and 7,726,001.

Trade Size

Metric Designator

Approximate Weight Per

100 Ft. (30.5M)

Outside Diameter1

Nominal Wall Thickness2

Quantity in Master Bundle*

Kwik-Couple Rigid Elbows

• Also available with pre-installed Kwik-Couple Couplings

• Made to order, contact us for lead times

Project Information

Company Name:

Address:

City:

State & Zip:

Phone:

Project Name:

City:

State:

NOTE: Special orders are non-cancelable, non-returnable and non-refundable www.alliedeg.com

Galvanized Rigid Conduit (GRC) and Kwik-Couple® GRC

FEATURES & SPECIFICATIONS

NOTE: Special orders are non-cancelable, non-returnable and non-refundable www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

KWIK-COUPLE AVAILABLE

Trade Size 2-1/2 to 5

Full Electrical System Protection Manufactured from mild steel, Allied’s Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending.

The 3/4” taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black, and 1/4 sizes red.

Coatings Hot-dip galvanized inside and out to provide galvanic corrosion protection. Also topcoated with a compatible organic layer to protect against white rust. The inside surface is evenly coated for wire-pulling ease, even through multiple 90° bends.

EMI Shielding Allied Rigid Steel Conduit is very effective in reducing the effects of electromagnetic field levels for encased power distribution circuits, shielding computers and other sensitive electronic equipment from the effects of electromagnetic interference.

Visit www.alliedeg.com to obtain the GEMI (Grounding and Electro-Magnetic Interference) software analysis program.

Codes & Standards Compliance Standard Galvanized Rigid Steel Conduit produced by Allied is precision manufactured for dependable, long-lasting value and ultimate protection for electrical conductors. Covered by article 344 of the National Electrical Code® (NEC), rigid steel conduit is highly resistant to damage from impact. It can be installed in all occupancies and locations, including Class I Division 1 hazardous locations. Rigid steel conduit is recognized as an equipment grounding conductor in Section

250.118 of the NEC. It is listed to Underwriters Laboratories Safety Standard UL 6 and is manufactured to ANSI C80.1, both of which have been adopted as Federal Specifications in lieu of WWC 581.

Kwik-Couple Rigid steel conduit is listed to UL 6 and UL 514B and is manufactured in accordance with ANSI C80.1. Kwik-Couple Rigid Steel conduit is Listed for Concrete-tight applications.

Installation of Rigid Metal Conduit shall be in accordance with the National Electrical Code and UL General Information card #DYIX.

Master bundles conform to NEMA standard RN2.

Specification Data To specify, Rigid Steel Conduit and Kwik-Couple Rigid Steel Conduit include the following: Rigid Steel Conduit shall be hot-dip galvanized and manufactured by Allied Tube & Conduit.

Threads shall be hot galvanized after cutting. Rigid steel conduit shall be listed to UL Safety Standard 6 by a nationally-recognized testing laboratory with follow up service. It shall be manufactured in accordance with ANSI C80.1.

Note: Federal specification WW-C-581, Class 1, Type A has been superseded by UL Standard 6, which has been adopted by the federal government.

in mm in mm lb kg ft m 2 1/2 63 2.875 73.03 0.193 4.90 559 253.6 400 121.9 3 78 3.500 88.90 0.205 5.21 727 329.8 300 91.4 3 1/2 91 4.000 101.60 0.215 5.46 880 399.2 250 76.2 4 103 4.500 114.30 0.225 5.72 1030 467.2 200 61.0 5 129 5.563 141.30 0.245 6.22 1400 635.0 150 45.7

Kwik-Couple (GRC) UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

1 Tolerances: Trade Size 2-1/2 to 5: ± 1% 2 For information only. Not a requirement of the UL standard.

Trade Size

Metric Designator

Approximate Weight Per

100 Ft. (30.5M)

Outside Diameter1

Nominal Wall Thickness2

Bundle Quantity

NOTE: Special orders are non-cancelable, non-returnable and www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Galvanized Rigid Conduit (GRC) Couplings & Elbows

Trade Size

Metric Designator

Nominal O.D. (A)2 Length (B)1 Threads Per Inch1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm lb kg 1/2 16 1.01 25.7 1 5/8 41.3 14 12 5.4 100 3/4 21 1.25 31.8 1 41/64 41.7 14 18 8.2 50 1 27 1.53 38.7 1 31/32 50.0 11 1/2 30 13.6 30

1 1/4 35 1.87 47.5 2 1/32 51.6 11 1/2 37 16.8 25 1 1/2 41 2.16 54.7 2 1/16 52.4 11 1/2 52 23.6 25

2 53 2.65 67.3 2 1/8 54.0 11 1/2 72 32.7 20 2 1/2 63 3.25 82.6 3 3/16 81.0 8 170 77.1 1

3 78 3.87 98.3 3 5/16 84.1 8 210 95.3 1 3 1/2 91 4.50 114.3 3 13/32 86.5 8 340 154.2 1

4 103 4.88 123.8 3 33/64 89.3 8 300 136.1 1 5 129 6.00 152.4 3 61/64 100.4 8 475 215.5 1 6 155 7.20 182.9 4 1/4 108.0 8 765 347.0 1

Galvanized Rigid Conduit (GRC) Couplings Manufactured to Underwriters Laboratory Safety Standards UL 6 Manufactured in accordance with ANSI C80.1

GRC Nipples & Couplings A = Diameter B = Length

1Mimimum requirement as per UL Standard

Galvanized Rigid Conduit (GRC) 90 Degree Elbows Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

Trade Size

Metric Designator

Radius (A)1 Offset (B)2 Straight (D)1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm in mm lb kg 1/2 16 4 102 5 7/8 149 1 1/2 38 68 30.8 50 3/4 21 4 1/2 114 7 178 1 1/2 38 109 49.4 50 1 27 5 3/4 146 8 3/4 222 1 7/8 48 201 91.2 25

1 1/4 35 7 1/4 184 10 3/4 273 2 51 336 152.4 20 1 1/2 41 8 1/4 210 12 1/4 311 2 51 460 208.7 15

2 53 9 1/2 241 14 1/2 368 2 51 729 330.7 10 2 1/2 63 10 1/2 267 17 432 3 76 1374 623.2 1

3 78 13 330 19 5/8 498 3 1/8 79 2045 927.6 1 3 1/2 91 15 381 22 3/4 578 3 1/4 83 2860 1297.3 1

4 103 16 406 23 7/8 606 3 3/8 86 3519 1596.2 1 5 129 24 610 34 7/8 886 3 5/8 92 6942 3148.9 1 6 155 30 762 45 1/2 1156 3 3/4 95 11960 5425.1 1

15˚ 30˚22.5˚

45˚ 60˚ 90˚

GRC Elbow - Dimensions A = Radius B = O�set C = Straight

1Mimimum requirement as per UL Standard 2For information only, not a requirement as per UL Standard Sizes 2 1/2 (63) and larger shipped in palletized cartons or bulk.

Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

B

B

D

D

A

B

A

KWIK-COUPLE ELBOWS AVAILABLE

by special order in Trade Size 2-1/2 to 5 www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Galvanized Rigid Conduit (GRC) Elbows

Trade Size

Metric Designator

Radius (A)1 Offset (B)2 Offset (C)2 Straight (D) 1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm in mm in mm lb kg 1/2 16 4 102 7 178 2 7/8 73 1 1/2 38 55 24.9 50 3/4 21 4 1/2 114 7 7/8 200 3 1/4 83 1 1/2 38 82 37.2 50 1 27 5 3/4 146 9 5/8 244 4 102 1 7/8 48 148 67.1 25

1 1/4 35 7 1/4 184 11 1/8 283 4 5/8 117 2 51 232 105.2 20 1 1/2 41 8 1/4 210 13 1/8 333 5 3/8 137 2 51 329 149.2 15

2 53 9 1/2 241 15 3/4 400 6 1/2 165 2 51 525 238.1 10 2 1/2 63 10 1/2 267 17 1/2 445 7 1/4 184 3 76 932 422.8 1

3 78 13 330 21 7/8 556 9 229 3 1/8 79 1515 687.2 1 3 1/2 91 15 381 26 1/8 664 10 7/8 276 3 1/4 83 2200 997.9 1

4 103 16 406 26 1/4 667 10 7/8 276 3 3/8 86 2575 1168.0 1 5 129 24 610 35 7/8 911 14 7/8 378 3 5/8 92 4783 2169.6 1 6 155 30 762 43 3/8 1102 18 457 3 3/4 95 7590 3442.8 1

Galvanized Rigid Conduit (GRC) 45 Degree Elbows Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

Galvanized Rigid Conduit (GRC) Large Radius 90 Degree Elbows Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

Trade Size

Metric Designator

Radius (A) Offset (B)2 Straight (D)2

Approximate Weight Per 100 Pieces in mm in mm in mm lb kg 1 27 12 305 20 5/8 524 8 5/8 219 483 219.1 1 27 15 381 24 1/4 616 9 1/4 235 564 255.8 1 27 18 457 27 7/8 708 9 7/8 251 644 292.1 1 27 24 610 34 5/8 879 10 5/8 270 792 359.3 1 27 30 762 41 1041 11 279 926 420.0 1 27 36 914 46 3/4 1187 10 3/4 273 1047 474.9 1 27 42 1067 54 1372 12 305 1208 547.9 1 27 48 1219 61 1/4 1556 13 1/4 337 1369 621.0

1 1/4 35 12 305 20 5/8 524 8 5/8 219 654 296.7 1 1/4 35 15 381 24 1/4 616 9 1/4 235 763 346.1 1 1/4 35 18 457 27 7/8 708 9 7/8 251 872 395.5 1 1/4 35 24 610 34 5/8 879 10 5/8 270 1072 486.3 1 1/4 35 30 762 41 1041 11 279 1254 568.8 1 1/4 35 36 914 46 3/4 1187 10 3/4 273 1417 642.8 1 1/4 35 42 1067 54 1372 12 305 1635 741.6 1 1/4 35 48 1219 61 1/4 1556 13 1/4 337 1853 840.5

15˚ 30˚22.5˚

45˚ 60˚ 90˚

GRC Elbow - Dimensions A = Radius B = O�set C = Straight

1Mimimum requirement as per UL Standard 2For information only, not a requirement as per UL Standard Sizes 2 1/2 (63) and larger shipped in palletized cartons or bulk.

Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

2For information only, not a requirement as per UL Standard Chart continued on the next page Shipped in palletized cartons or bulk.

Also available in the following Degrees (90°, 60°, 30°, 22-1/2°, 15° & 11-1/4°)

15˚ 30˚22.5˚

45˚ 60˚ 90˚

GRC Elbow - Dimensions A = Radius B = O�set C = Straight

D

D

B

A

B

B

C

D

D

A

KWIK-COUPLE ELBOWS AVAILABLE

by special order in Trade Size 2-1/2 to 5 www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Galvanized Rigid Conduit (GRC) Elbows

Galvanized Rigid Conduit (GRC) Large Radius 90 Degree Elbows (continued) Listed UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

Trade Size

Metric Designator

Radius (A) Offset (B)2 Straight (D)2

Approximate Weight Per 100 Pieces in mm in mm in mm lb kg 1 1/2 41 12 305 20 5/8 524 8 5/8 219 789 357.9 1 1/2 41 15 381 24 1/4 616 9 1/4 235 921 417.8 1 1/2 41 18 457 27 7/8 708 9 7/8 251 1052 477.2 1 1/2 41 24 610 34 5/8 879 10 5/8 270 1293 586.5 1 1/2 41 30 762 41 1041 11 279 1512 685.8 1 1/2 41 36 914 46 3/4 1187 10 3/4 273 1710 775.7 1 1/2 41 42 1067 54 1372 12 305 1973 895.0 1 1/2 41 48 1219 61 1/4 1556 13 1/4 337 2236 1014.2

2 53 15 381 24 1/4 616 9 1/4 235 1225 555.7 2 53 18 457 27 7/8 708 9 7/8 251 1400 635.0 2 53 24 610 30 3/8 772 6 3/8 162 1473 668.2 2 53 30 762 41 1041 11 279 2013 913.1 2 53 36 914 46 3/4 1187 10 3/4 273 2275 1031.9 2 53 42 1067 54 1372 12 305 2625 1190.7 2 53 48 1219 61 1/4 1556 13 1/4 337 2975 1349.5

2 1/2 63 18 457 24 3/8 619 6 3/8 162 1910 866.4 2 1/2 63 24 610 31 1/8 791 7 1/8 181 2422 1098.6 2 1/2 63 30 762 37 1/2 953 7 1/2 191 2888 1310.0 2 1/2 63 36 914 44 3/4 1137 8 3/4 222 3447 1563.6 2 1/2 63 42 1067 54 1372 12 305 4193 1901.9 2 1/2 63 48 1219 61 1/4 1556 13 1/4 337 4752 2155.5

3 78 15 381 24 1/4 616 9 1/4 235 2545 1154.4 3 78 18 457 24 3/8 619 6 3/8 162 2484 1126.7 3 78 24 610 33 1/8 841 9 1/8 232 3393 1539.1 3 78 30 762 38 5/8 981 8 5/8 219 3892 1765.4 3 78 36 914 46 7/8 1191 10 7/8 276 4741 2150.5 3 78 42 1067 54 1372 12 305 5453 2473.5 3 78 48 1219 60 1/4 1530 12 1/4 311 6058 2747.9 3 78 60 1524 75 7/8 1927 15 7/8 403 7634 3462.8

3 1/2 91 18 457 26 3/8 670 8 3/8 213 3300 1496.9 3 1/2 91 24 610 35 1/8 892 11 1/8 283 4400 1995.8 3 1/2 91 30 762 38 1/2 978 8 1/2 216 4693 2128.7 3 1/2 91 36 914 47 1194 11 279 5757 2611.4 3 1/2 91 42 1067 54 1372 12 305 6600 2993.8 3 1/2 91 48 1219 60 1/4 1530 12 1/4 311 7333 3326.2

4 103 18 457 27 3/8 695 9 3/8 238 4034 1829.8 4 103 24 610 35 1/8 892 11 1/8 283 5150 2336.0 4 103 30 762 39 3/8 1000 9 3/8 238 5644 2560.1 4 103 36 914 47 1194 11 279 6738 3056.4 4 103 42 1067 54 1372 12 305 7725 3504.1 4 103 48 1219 60 1/4 1530 12 1/4 311 8583 3893.2 4 103 60 1524 75 7/8 1927 15 7/8 403 10815 4905.7

2For information only, not a requirement as per UL Standard Chart continued on the next page Shipped in palletized cartons or bulk.

Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

15˚ 30˚22.5˚

45˚ 60˚ 90˚

GRC Elbow - Dimensions A = Radius B = O�set C = Straight

B

B

A

D

D

KWIK-COUPLE AVAILABLE

Trade Size 2-1/2 to 5 by special order www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Galvanized Rigid Conduit (GRC) Elbows & Nipples

Galvanized Rigid Conduit (GRC) Large Radius 90 Degree Elbows (continued) Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

Trade Size

Metric Designator

Radius (A) Offset (B)2 Straight (D)2

Approximate Weight Per 100 Pieces in mm in mm in mm lb kg 5 129 36 914 50 3/4 1289 14 3/4 375 10033 4551.0 5 129 48 1219 65 1/4 1657 17 1/4 438 12833 5821.0 5 129 60 1524 75 7/8 1927 15 7/8 403 14700 6667.9 6 155 36 914 50 3/4 1289 14 3/4 375 13187 5981.6 6 155 48 1219 65 1/4 1657 17 1/4 438 16867 7650.9 6 155 60 1524 75 7/8 1927 15 7/8 403 19320 8763.6

15˚ 30˚22.5˚

45˚ 60˚ 90˚

GRC Elbow - Dimensions A = Radius B = O�set C = Straight

Galvanized Rigid Conduit (GRC) Nipples Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

Trade Size

Metric Designator

Length (A) Total Thread Length (B)1

Threads Per Inch1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm lb kg 1/2 16 (Close) 1 1/8 29 0.78 19.8 14 6 2.7 25 1/2 16 1 1/2 38 0.78 19.8 14 8 3.6 25 1/2 16 2 51 0.78 19.8 14 12 5.4 25 1/2 16 2 1/2 64 0.78 19.8 14 15 6.8 25 1/2 16 3 76 0.78 19.8 14 19 8.6 25 1/2 16 3 1/2 89 0.78 19.8 14 22 10.0 25 1/2 16 4 102 0.78 19.8 14 26 11.8 25 1/2 16 5 127 0.78 19.8 14 33 15.0 25 1/2 16 6 152 0.78 19.8 14 40 18.1 25 1/2 16 8 203 0.78 19.8 14 54 24.5 25 1/2 16 10 254 0.78 19.8 14 68 30.8 25 1/2 16 12 305 0.78 19.8 14 82 37.2 25 3/4 21 (Close) 1 3/8 35 0.79 20.1 14 9 4.1 25 3/4 21 1 1/2 38 0.79 20.1 14 10 4.5 25 3/4 21 2 51 0.79 20.1 14 14 6.4 25 3/4 21 2 1/2 64 0.79 20.1 14 19 8.6 25 3/4 21 3 76 0.79 20.1 14 24 10.9 25 3/4 21 3 1/2 89 0.79 20.1 14 28 12.7 25 3/4 21 4 102 0.79 20.1 14 34 15.4 25 3/4 21 5 127 0.79 20.1 14 43 19.5 25 3/4 21 6 152 0.79 20.1 14 52 23.6 25 3/4 21 8 203 0.79 20.1 14 73 33.1 25 3/4 21 10 254 0.79 20.1 14 89 40.4 25 3/4 21 12 305 0.79 20.1 14 109 49.4 25

1Mimimum requirement as per UL Standard Chart continued on the next page A tolerance of minus one thread applies to Total length of Thread

2For information only, not a requirement as per UL Standard Shipped in palletized cartons or bulk.

Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

GRC Nipples & Couplings A = Diameter B = Length

B

A

B

B

A

D

D

KWIK-COUPLE AVAILABLE

Trade Size 2-1/2 to 5 by special order www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Galvanized Rigid Conduit (GRC) Nipples

Trade Size

Metric Designator

Length (A) Total Thread Length (B)1

Threads Per Inch1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm lb kg 1 27 (Close) 1 1/2 38 0.98 24.9 11 1/2 16 7.3 25 1 27 2 51 0.98 24.9 11 1/2 22 10.0 25 1 27 2 1/2 64 0.98 24.9 11 1/2 28 12.7 25 1 27 3 76 0.98 24.9 11 1/2 36 16.3 25 1 27 3 1/2 89 0.98 24.9 11 1/2 43 19.5 25 1 27 4 102 0.98 24.9 11 1/2 49 22.2 25 1 27 5 127 0.98 24.9 11 1/2 64 29.0 25 1 27 6 152 0.98 24.9 11 1/2 78 35.4 25 1 27 8 203 0.98 24.9 11 1/2 109 49.4 25 1 27 10 254 0.98 24.9 11 1/2 138 62.6 25 1 27 12 305 0.98 24.9 11 1/2 166 75.3 25

1 1/4 35 (Close) 1 5/8 41 1.01 25.7 11 1/2 22 10.0 25 1 1/4 35 2 51 1.01 25.7 11 1/2 28 12.7 25 1 1/4 35 2 1/2 64 1.01 25.7 11 1/2 37 16.8 25 1 1/4 35 3 76 1.01 25.7 11 1/2 47 21.3 25 1 1/4 35 3 1/2 89 1.01 25.7 11 1/2 55 24.9 25 1 1/4 35 4 102 1.01 25.7 11 1/2 66 29.9 25 1 1/4 35 5 127 1.01 25.7 11 1/2 84 38.1 25 1 1/4 35 6 152 1.01 25.7 11 1/2 100 45.4 25 1 1/4 35 8 203 1.01 25.7 11 1/2 136 61.7 25 1 1/4 35 10 254 1.01 25.7 11 1/2 176 79.8 40 1 1/4 35 12 305 1.01 25.7 11 1/2 216 98.0 30 1 1/2 41 (Close) 1 3/4 44 1.03 26.2 11 1/2 28 12.7 25 1 1/2 41 2 51 1.03 26.2 11 1/2 34 15.4 25 1 1/2 41 2 1/2 64 1.03 26.2 11 1/2 44 20.0 25 1 1/2 41 3 76 1.03 26.2 11 1/2 56 25.4 25 1 1/2 41 3 1/2 89 1.03 26.2 11 1/2 68 30.8 25 1 1/2 41 4 102 1.03 26.2 11 1/2 80 36.3 25 1 1/2 41 5 127 1.03 26.2 11 1/2 103 46.7 25 1 1/2 41 6 152 1.03 26.2 11 1/2 122 55.3 50 1 1/2 41 8 203 1.03 26.2 11 1/2 170 77.1 40 1 1/2 41 10 254 1.03 26.2 11 1/2 216 98.0 30 1 1/2 41 12 305 1.03 26.2 11 1/2 260 117.9 20

2 53 (Close) 2 51 1.06 26.9 11 1/2 44 20.0 25 2 53 2 1/2 64 1.06 26.9 11 1/2 59 26.8 25 2 53 3 76 1.06 26.9 11 1/2 72 32.7 25 2 53 3 1/2 89 1.06 26.9 11 1/2 88 39.9 40 2 53 4 102 1.06 26.9 11 1/2 103 46.7 40 2 53 5 127 1.06 26.9 11 1/2 132 59.9 40 2 53 6 152 1.06 26.9 11 1/2 160 72.6 30 2 53 8 203 1.06 26.9 11 1/2 220 99.8 20 2 53 10 254 1.06 26.9 11 1/2 285 129.3 20 2 53 12 305 1.06 26.9 11 1/2 335 152.0 15

Galvanized Rigid Conduit (GRC) Nipples (continued) Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

1Mimimum requirement as per UL Standard Chart continued on the next page A tolerance of minus one thread applies to Total length of Thread

GRC Nipples & Couplings A = Diameter B = Length

B

A www.alliedeg.com 16100 S. Lathrop Ave., Harvey, IL 60426 Phone / 708.339.1610 • Toll-Free / 800.882.5543

Galvanized Rigid Conduit (GRC) Nipples

1Mimimum requirement as per UL Standard A tolerance of minus one thread applies to Total length of Thread

Trade Size

Metric Designator

Length (A) Total Thread Length (B)1

Threads Per Inch 1

Approximate Weight Per 100 Pieces

Standard Package in mm in mm lb kg 2 1/2 63 (Close) 2 3/4 70 1.57 39.9 8 84 38.1 1 2 1/2 63 3 76 1.57 39.9 8 100 45.4 1 2 1/2 63 3 1/2 89 1.57 39.9 8 120 54.4 1 2 1/2 63 4 102 1.57 39.9 8 150 68.0 1 2 1/2 63 5 127 1.57 39.9 8 197 89.4 1 2 1/2 63 6 152 1.57 39.9 8 240 108.9 1 2 1/2 63 8 203 1.57 39.9 8 329 149.2 1 2 1/2 63 10 254 1.57 39.9 8 422 191.4 1 2 1/2 63 12 305 1.57 39.9 8 505 229.1 1

3 78 (Close) 2 5/8 67 1.63 41.4 8 118 53.5 1 3 78 3 76 1.63 41.4 8 130 59.0 1 3 78 3 1/2 89 1.63 41.4 8 157 71.2 1 3 78 4 102 1.63 41.4 8 200 90.7 1 3 78 5 127 1.63 41.4 8 260 117.9 1 3 78 6 152 1.63 41.4 8 300 136.1 1 3 78 8 203 1.63 41.4 8 411 186.4 1 3 78 10 254 1.63 41.4 8 528 239.5 1 3 78 12 305 1.63 41.4 8 630 285.8 1

3 1/2 91 (Close) 2 3/4 70 1.68 42.7 8 160 72.6 1 3 1/2 91 4 102 1.68 42.7 8 240 108.9 1 3 1/2 91 5 127 1.68 42.7 8 320 145.2 1 3 1/2 91 6 152 1.68 42.7 8 373 169.2 1 3 1/2 91 8 203 1.68 42.7 8 510 231.3 1 3 1/2 91 10 254 1.68 42.7 8 655 297.1 1 3 1/2 91 12 305 1.68 42.7 8 785 356.1 1

4 103 (Close) 2 7/8 73 1.73 43.9 8 180 81.6 1 4 103 4 102 1.73 43.9 8 285 129.3 1 4 103 5 127 1.73 43.9 8 380 172.4 1 4 103 6 152 1.73 43.9 8 440 199.6 1 4 103 8 203 1.73 43.9 8 600 272.2 1 4 103 10 254 1.73 43.9 8 775 351.5 1 4 103 12 305 1.73 43.9 8 925 419.6 1 5 129 (Close) 3 76 1.84 46.7 8 240 108.9 1 5 129 5 127 1.84 46.7 8 480 217.7 1 5 129 6 152 1.84 46.7 8 600 272.2 1 5 129 8 203 1.84 46.7 8 825 374.2 1 5 129 10 254 1.84 46.7 8 1055 478.5 1 5 129 12 305 1.84 46.7 8 1260 571.5 1 6 155 (Close) 3 1/8 79 1.95 49.5 8 350 158.8 1 6 155 5 127 1.95 49.5 8 660 299.4 1 6 155 6 152 1.95 49.5 8 820 372.0 1 6 155 8 203 1.95 49.5 8 1125 510.3 1 6 155 10 254 1.95 49.5 8 1440 653.2 1 6 155 12 305 1.95 49.5 8 1720 780.2 1

GRC Nipples & Couplings A = Diameter B = Length

Galvanized Rigid Conduit (GRC) Nipples (continued) Listed to UL Safety Standard 6 Manufactured in accordance with ANSI C80.1

B

A

FasTrak® Plus Electrical Metallic Tubing (EMT)

For more information, call 800.257.8182 or visit wheatland.com

C22.2 No. 83.1-07 or UL® Listed to UL-797, depending on the market being supplied. It is manufactured in accordance with ANSI® C80.3, UL-797 and federal specifications WW-C-563. It provides mechanical protection for cables and conductors, reduces electromagnetic field exposure, shields against electromagnetic interference and is recognized as an equipment grounding conductor by NFPA 70: NEC 250.118 (4). Email info@wheatland.com for a copy of Georgia Tech’s Grounding and ElectroMagnetic Interference (GEMI) Analysis software.

The Smart Way to RacewaySM Wheatland Tube’s SmartSet™ EMT with built-in set screw coupling is available on 10' and 20' FasTrak Plus EMT.

SmartSet is UL Listed and manufactured in accordance with ANSI C80.1. Our SmartSet product can come built into one end of every piece of EMT to save time and money on every job.

Designed for Quality and Efficiency At Wheatland Tube, we leverage our experience and the latest technologies to provide a consistent, high-quality product with on-time deliveries. We manufacture FasTrak Plus EMT from mild steel strip in state-of-the-art ERW mills with the industry’s leading in-line galvanizing process that applies molten zinc to the outside diameter. A clear coating is then applied to the outside diameter to inhibit rust and reduce storage stains. The inside diameter is sprayed with a proprietary coating for corrosion resistance and easy wire pulling. The product is then inspected visually and with instruments to ensure all meet the product standard specifications. Our complete in-house production capabilities and quality control programs provide consistency in production.

Green and Sustainable FasTrak Plus EMT contains recycled steel content of various amounts, depending on the steel manufacturing process, and will provide decades of reliable service if properly maintained. Conductors may be easily removed and new conductors or cables inserted. Future circuits may be added in the same conduit, as permitted by the code. At the end of its life, the steel may be fully recycled.

Tested and Certified for Safety FasTrak Plus EMT is CSA Certified to CSA

5' lengths — trade sizes ½ and ¾

Accurate circular cross section with uniform wall thickness

Interior surface free from defects injurious to conductors

Lightweight, easy to install

Galvanized OD with additional clear coating

Proprietary ID coating for fast wire-pulling performance

Contains recycled steel

An easy but tough wiring solution With enhanced ID coating, FasTrak Plus EMT offers exceptional wire-pulling performance. A lightweight, smooth-pull wiring solution, easy to bend, yet tough enough for all locations that comply with the National Electrical Code® (NEC®), including dry, wet, exposed, concealed or hazardous locations.

FasTrak® Plus Electrical Metallic Tubing (EMT):

Also available in 20' mailto:info@wheatland.com

SmartSet EMT with integral set screw coupling is available in 10' and 20' lengths through special order for standard FasTrak Plus EMT. Minimum order quantities apply.

NO. E48675

SMARTSET EMT WEIGHTS, DIMENSIONS AND PACKAGING (20' LENGTHS)

Silver (traditional galvanized EMT) is available from stock ½–4. Other colors, sizes and 5' and 20' lengths available as special order. Minimum order quantities may apply.

EMT WEIGHTS, DIMENSIONS AND PACKAGING (10' LENGTHS)

TRADE SIZE

METRIC

DESIGNATOR WEIGHT / 100 FT. MASTER BUNDLE QUANTITY

MASTER BUNDLE

WEIGHT

MASTER BUNDLE

VOLUME

lbs. kg Pieces ft. m lbs. kg cu. ft. cu. m

1/2 16 30 13.6 700 7000 2133.6 2100 952.6 31.7 0.9

3/4 21 46 20.9 500 5000 1524.0 2300 1043.3 36.1 1.0

1 27 67 30.4 300 3000 914.4 2010 911.7 36.5 1.0

1 1/4 35 101 45.8 200 2000 609.6 2020 916.3 38.2 1.1

1 1/2 41 116 52.6 150 1500 457.2 1740 789.3 37.9 1.1

2 53 148 67.1 120 1200 365.8 1776 805.6 46.7 1.3

2 1/2 63 216 98.0 61 610 185.9 1317.6 597.7 41.5 1.2

3 78 263 119.3 51 510 155.4 1341.3 608.4 48.9 1.4

3 1/2 91 349 158.3 37 370 112.8 1291.3 585.7 48.6 1.4

4 103 393 178.3 30 300 91.4 1179 534.8 50 1.4

Silver (traditional galvanized EMT) is available from stock ½–4. Other colors, sizes and 5' and 20' lengths available as special order. Minimum order quantities may apply.

EMT WEIGHTS, DIMENSIONS AND PACKAGING (20' LENGTHS)

TRADE SIZE

METRIC

DESIGNATOR WEIGHT / 100 FT. MASTER BUNDLE QUANTITY

MASTER BUNDLE

WEIGHT

MASTER BUNDLE

VOLUME

lbs. kg Pieces ft. m lbs. kg cu. ft. cu. m

1/2 16 30 13.6 175 3500 1066.8 1050 476.3 15.6 0.44

3/4 21 46 20.9 125 2500 762.0 1150 521.6 18.1 0.51

1 27 67 30.4 75 1500 457.2 1005 455.9 18.3 0.52

1 1/4 35 101 45.8 50 1000 304.8 1010 458.1 19.1 0.54

1 1/2 41 116 52.6 37 740 225.6 858 389.2 19.0 0.54

2 53 148 67.1 37 740 225.6 1095 496.7 23.4 0.66

2 1/2 63 216 98.0 19 380 115.8 821 372.4 20.4 0.58

3 78 263 119.3 19 380 115.8 999 453.1 24.0 0.68

3 1/2 91 349 158.3 19 380 115.8 1326 601.5 23.6 0.67

4 103 393 178.3 10 200 61.0 786 356.5 25.0 0.71

SmartSet EMT with integral set screw coupling is available in 10' and 20' lengths through special order for standard FasTrak Plus EMT. Minimum order quantities apply.

SMARTSET EMT WEIGHTS, DIMENSIONS AND PACKAGING (10' LENGTHS)

TRADE SIZE

METRIC

DESIGNATOR WEIGHT / 100 FT. MASTER BUNDLE QUANTITY

MASTER BUNDLE

WEIGHT

MASTER BUNDLE

VOLUME

lbs. kg Pieces ft. m lbs. kg cu. ft. cu. m

1 1/4 35 1.01 0.46 84 840 256.0 848 384.6 19.1 0.54

1 1/2 41 1.16 0.53 72 720 219.5 835 378.7 19.0 0.54

2 53 1.48 0.67 50 500 152.4 740 335.7 23.4 0.66

2 1/2 63 2.16 0.98 35 350 106.7 756 342.9 20.4 0.58

3 78 2.63 1.19 30 300 91.4 789 357.9 24.0 0.68

3 1/2 91 3.49 1.58 25 250 76.2 873 396.0 23.6 0.67

4 103 3.93 1.78 25 250 76.2 983 445.9 25.0 0.71

TRADE SIZE

METRIC

DESIGNATOR WEIGHT / 100 FT. MASTER BUNDLE QUANTITY

MASTER BUNDLE

WEIGHT

MASTER BUNDLE

VOLUME

lbs. kg Pieces ft. m lbs. kg cu. ft. cu. m

1 1/4 35 1.01 0.46 50 1000 304.8 1010 458.1 15.8 0.45

1 1/2 41 1.16 0.53 36 720 219.5 835 378.7 15.6 0.44

2 53 1.48 0.67 36 720 219.5 1066 483.5 24.8 0.7

2 1/2 63 2.16 0.98 20 400 121.9 864 391.9 21.8 0.62

3 78 2.63 1.19 20 400 121.9 1052 477.2 32.3 0.91

3 1/2 91 3.49 1.58 20 400 121.9 1396 633.2 42.2 1.19

4 103 3.93 1.78 12 240 73.2 943 427.7 28.1 0.8

700 South Dock Street Sharon, PA 16146

800.257.8182 info@wheatland.com wheatland.com

Corporate Office 227 West Monroe Street Suite 2600 Chicago, IL 60606

312.275.1600 info@zekelman.com zekelman.com

WEL-101717

About Wheatland Tube Electrical Conduit and Fittings Wheatland Tube produces a broad spectrum of steel electrical conduit, including intermediate metal conduit (IMC), electrical metallic tubing (EMT) and DuraGuard™ hot-dip galvanized steel rigid metal conduit. We also supply a full line of steel and aluminum elbows and nipples, steel couplings, and rigid aluminum conduit and couplings. Additionally, we now offer SpeedCouple, a factory-installed swivel coupling, and SmartSet™ EMT with integral set screw coupling.

For more information, contact Wheatland Tube at:

800.257.8182 or info@wheatland.com Or, visit our website at wheatland.com

Follow us on:

twitter.com/WheatlandTube linkedin.com/company/zekelman-industries youtube.com/ZekelmanIndustries wheatland.com/blog

Revised: Oct 28, 2015

SHER-CRYL™ HPA

HIGH PERFORMANCE ACRYLIC

B66-300 SerieS GloSS B66-350 SerieS Semi-GloSS

Protective

Marine Coatings

1.26 www.sherwin-williams.com/protective

Product descriPtion

SHER-CRYL HPA is a new technology, ambient cured, one compo-nent acrylic coating with superior exterior performance properties.

Provides performance comparable to high performance solvent based coatings such as urethanes and epoxies.

Product characteristics

Finish: High Gloss or Semi-Gloss

Color: Wide range of colors available

Volume Solids: 38.5% ± 2%, Ultra White

Weight Solids: 51% ± 2%, Ultra White

VOC (EPA Method 24): <200 g/L; 1.66 lb/gal

Recommended Spreading Rate per coat:

Minimum Maximum

Wet mils (microns) 6.0 (150) 10.0 (250) Dry mils (microns) 2.5 (63) 4.0 (100) ~Coverage sq ft/gal (m2/L) 154 (3.8) 247 (6.0) Theoretical coverage sq ft/gal (m2/L) @ 1 mil / 25 microns dft 616 (15.1)

NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance.

Drying Schedule @ 7.0 mils wet (175 microns):

@ 50°F/10°C @ 77°F/25°C @ 120°F/49°C

50% RH

To touch: 1 hour 30 minutes 5 minutes To handle: 8 hours 5 hours 15 minutes To recoat: 8 hours 5 hours 15 minutes To cure: 30 days 30 days 30 days Drying time is temperature, humidity, and film thickness dependent.

Shelf Life: 36 months, unopened

Flash Point: >230°F (110°C) PMCC, mixed Reducer: Water

R8K10 - WB Hot Weather Reducer up to 10%

Clean Up: Water continued on back recommended uses

Examples:

Gloss)

Performance characteristics

System Tested*:

2 cts. Sher-Cryl HPA @ 3.0 mils (75 microns) dft/ct

*unless otherwise noted below

Test Name Test Method Results Adhesion ASTM D4541 946 psi

Corrosion Weathering1

ASTM D5894, 10

cycles, 3,360 hours

Direct Impact Resistance ASTM D2794 >100 in. lbs.

Flexibility ASTM D522, 180° bend, 1/8" mandrel Passes

Humidity Resistance1

ASTM D4585, 1,250

hours

Pencil Hardness ASTM D3363 2B

Salt Fog Resistance1

ASTM B117, 1,250

hours

Thermal Cycling ASTM D2246, 10 cycles Passes

Footnote:

1 1 ct. Sher-Cryl HPA over 1 ct. Pro Industrial Pro-Cryl Universal Primer Provides performance comparable to products formulated to fed-

Protective

Marine Coatings

1.26 www.sherwin-williams.com/protective surface PreParation

Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion.

Do not use hydrocarbon solvents for cleaning.

Refer to product Application Bulletin for detailed surface preparation information.

Surface Preparation Standards Condition of Surface

ISO 8501-1

BS7079:A1

Swedish Std.

SIS055900 SSPC NACE

Pitted & Rusted D St 3 D St 3 SP 3 -tinting

Tint with CCE or EnviroToner colorants at 100% strength. Do not use BAC.

Five minutes minimum mixing on a mechanical shaker is required for complete mixing of color.

aPPlication conditions

Temperature: 50°F (10°C) minimum, 120°F (49°C) maximum (air, surface, and material) At least 5°F (2.8°C) above dew point Relative humidity: 85% maximum

Refer to product Application Bulletin for detailed application information.

ordering information

Packaging: 1 gallon (3.78L) and 5 gallon (18.9L) containers Weight: 10.30 ± 0.2 lb/gl 1.24 Kg/L safety Precautions Refer to the MSDS sheet before use.

Published technical data and instructions are subject to change without notice.

Contact your Sherwin-Williams representative for additional technical data and instructions.

Warranty

tive product or the refund of the purchase price paid for the defective product as

Product information recommended systems Dry Film Thickness / ct.

Mils (Microns) Steel:

2 cts. Sher-Cryl HPA 2.5-4.0 (63-100)

Steel:

1 ct. Pro Industrial Pro-Cryl 2.0-4.0 (50-100) Universal Primer 1-2 cts. Sher-Cryl HPA 2.5-4.0 (63-100) Steel:

Steel:

Aluminum:

2 cts. Sher-Cryl HPA 2.5-4.0 (63-100)

Aluminum:

Galvanizing:

2 cts. Sher-Cryl HPA 2.5-4.0 (63-100)

Concrete Block:

Concrete/Masonry:

2 cts. Sher-Cryl HPA 2.5-4.0 (63-100)

Prefinished Siding: (Baked-on finishes)

Wood, exterior:

Wood, interior:

The systems listed above are representative of the product's use, other systems may be appropriate.

disclaimer

Protective

Marine Coatings

1.26 www.sherwin-williams.com/protective surface PreParations Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion.

Do not use hydrocarbon solvents for cleaning.

Iron & Steel

recommended for best performance.

Aluminum Remove all oil, grease, dirt, oxide and other foreign material per

SSPC-SP1.

Galvanizing

Concrete and Masonry

recommendations.

Weathered masonry and soft or porous cement board must be brush blasted or power tool cleaned to remove loosely adhering contamina-tion and to get to a hard, firm surface. Apply one coat Loxon Condi-tioner, following label recommendations.

Wood

foggy weather. Knots and pitch streaks must be scraped, sanded and spot primed before full coat of primer is applied. All nail holes or small openings must be properly caulked.

Pre-Finished Siding:

Remove oil, grease, dirt, oxides, and other contaminants from the sur-

Previously Painted Surfaces If in sound condition, clean the surface of all foreign material. Smooth, hard or glossy coatings and surfaces should be dulled by abrading the

or removal of the previous coating may be necessary. Retest surface for adhesion. If paint is peeling or badly weathered, clean surface to sound substrate and treat as a new surface as above.

Surface Preparation Standards Condition of Surface

ISO 8501-1

BS7079:A1

Swedish Std.

SIS055900 SSPC NACE

Pitted & Rusted D St 3 D St 3 SP 3 -aPPlication Bulletin aPPlication conditions

Temperature: 50°F (10°C) minimum, 120°F (49°C) maximum (air, surface, and material) At least 5°F (2.8°C) above dew point

Relative humidity: 85% maximum aPPlication equiPment

existing environmental and application conditions.

Reducer ............................Water R8K10 - WB Hot Weather Reducer up to 10% Clean Up ..........................Water

Airless Spray Pressure.........................1500 psi

Conventional Spray Gun ................................Binks 95

Brush

Roller

continued on back

Protective

Marine Coatings

1.26 www.sherwin-williams.com/protective aPPlication Bulletin aPPlication Procedures

Surface preparation must be completed as indicated.

Mixing Instructions: Mix paint thoroughly to a uniform consistency with low speed power agitation prior to use.

Apply paint at the recommended film thickness and spreading rate as indicated below:

Recommended Spreading Rate per coat:

Minimum Maximum

Wet mils (microns) 6.0 (150) 10.0 (250) Dry mils (microns) 2.5 (63) 4.0 (100) ~Coverage sq ft/gal (m2/L) 154 (3.8) 247 (6.0) Theoretical coverage sq ft/gal (m2/L) @ 1 mil / 25 microns dft 616 (15.1)

NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance.

Drying Schedule @ 7.0 mils wet (175 microns):

@ 50°F/10°C @ 77°F/25°C @ 120°F/49°C

50% RH

To touch: 1 hour 30 minutes 5 minutes To handle: 8 hours 5 hours 15 minutes To recoat: 8 hours 5 hours 15 minutes To cure: 30 days 30 days 30 days Drying time is temperature, humidity, and film thickness dependent.

Application of coating above maximum or below minimum recommended spreading rate may adversely affect coating performance.

clean uP instructions

disclaimer

Performance tiPs

Stripe coat all crevices, welds, and sharp angles to prevent early failure in these areas.

When using spray application, use a 50% overlap with each pass of the gun to avoid holidays, bare areas, and pinholes. If necessary, cross spray at a right angle

During the early stages of drying, the coating is sensitive to rain, dew, high humidity, and moisture condensation. Plan painting schedules to avoid these influences during the first 16-24 hours of curing.

tion, various surface irregularities, material lost during mixing, spillage, overthinning, climatic conditions, and excessive film build.

Excessive reduction of material can affect film build, appearance, and adhesion.

Application temperature above 95°F (35°C) may cause dry spray, uneven sheen, and poor adhesion.

Application temperature below 50°F (10°C) may cause poor adhesion and lengthen the drying and curing time.

hydrocarbon containing solvents.

Do not use hydrocarbon solvents for cleaning.

Refer to Product Information sheet for additional performance charac-teristics and properties.

immediately from hot surfaces.

Refer to Product Information sheet for additional performance characteristics and properties.

safety Precautions Refer to the MSDS sheet before use.

Published technical data and instructions are subject to change without notice.

Contact your Sherwin-Williams representative for additional technical data and instructions.

Warranty

fective product or the refund of the purchase price paid for the defective product

• Southwire Type THHN or THWN-2* conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications as specified in the National Electrical Code2

• When used as Type THHN, conductor is suitable for use in dry locations at temperatures not to exceed 90°C

• When used as Type THWN-2*, conductor is suitable for use in wet or dry locations at temperatures not to exceed 90°C or…