J15_Hazmat Report.pdf

Stantec Consulting Services Inc.

290 Conejo Ridge Avenue, Thousand Oaks, CA 91361

September 26, 2023 File: 185806149

Attention: Wilfred Cassidy, PE Branch Manager Senior Principal – Civil Engineering Stantec GS Email: wilfred.cassidy@stantecgs.com

Reference: Pre-Renovation Hazardous Materials Survey – Building 2424

United States Air Force, Joint Base McGuire-Dix-Lakehurst, New Jersey 08641

Dear Mr. Cassidy:

Stantec Consulting Services Inc. (Stantec) appreciates the opportunity to provide Baker+Stanley+Cardno Joint Venture (JV) and the United States Air Force (USAF) with this pre-renovation hazardous materials survey report. The survey was performed at the property referenced above (herein referred to as the Property), on July 26, 2023. The Property is located on McGuire Boulevard, west of the intersection of McGuire Boulevard and POW/MIA Boulevard within Joint Base McGuire-Dix-Lakehurst located in Burlington County, New Jersey, United States of America. Stantec understands that Building 2424 is scheduled to undergo extensive renovation, including renovating bathrooms and bedrooms and replacing window flashings and flooring materials.

The purpose of this assessment was to evaluate for the presence of asbestos-containing materials (ACMs), lead-based paint (LBP), microbial growth, and other hazardous materials that would require special handling and/or disposal in accordance with applicable federal, state, and local regulations.

BACKGROUND

Stantec was retained under the Baker+Stanley+Cardno JV to conduct a pre-renovation hazardous materials survey of accessible materials in support of the planned renovation of the Property.

The Property consists of Building 2424, a three-story dormitory building comprised of approximately 60,330 total square feet, constructed circa 1997. The interior of the Property is generally finished with drywall and carpet. The exterior of the Property is generally comprised of brick and mortar, stucco, and concrete.

PROJECT PERSONNEL

The survey was performed on July 26, 2023, by Mr. Thomas Causey, Geologist with Stantec, United States Environmental Protection Agency (EPA) Asbestos Hazard Emergency Response Act (AHERA) accredited Building Inspector, and Mr. John Davis, Geologist with Stantec, EPA AHERA accredited Building Inspector.

Lead-paint assessment was conducted by Mr. Causey and Mr. Davis under the guidance of Mr. Jason Stagno, Principal Scientist with Stantec and EPA certified Lead-Based Paint Risk Assessor.

SUSPECT ASBESTOS CONTAINING MATERIALS

Asbestos is a potential health hazard capable of causing respiratory system fibrosis and various forms of systemic cancers. Its condition, handling and disposal are regulated by federal, state, and local agencies.

mailto:wilfred.cassidy@stantecgs.com

Pre-Renovation Hazardous Materials Survey Building 2424 – United States Air Force, Joint Base McGuire-Dix-Lakehurst, New Jersey 08641

Project No.: 185706149

Materials that contain asbestos generally do not pose a health threat unless the asbestos fibers are disturbed by renovation, construction or demolition, and may then become airborne and inhaled.

The EPA defines a homogeneous area as a surfacing material, thermal system insulation, or miscellaneous material that is uniform in color and texture. The use or application of the homogeneous area is also used to identify suspect ACMs. The EPA and Federal Occupational Safety and Health Administration (OSHA) define ACM as any material that contains more than one percent (by weight) of asbestos (>1%). Only one sample from a homogeneous area with an asbestos concentration >1% is required to collectively identify that material as an ACM. The EPA additionally categorizes ACM as follows:

• Category I non-friable ACM - asbestos containing packings, gaskets, resilient floor covering, and asphalt roofing products containing more than 1% asbestos as determined using the polarized light microscopy with dispersion staining (PLM) method.

• Category II non-friable ACM - any material, excluding Category I non-friable ACM, containing more than 1% asbestos as determined using the PLM method that, when dry, cannot be crumbled, pulverized, or reduced to powder by hand pressure.

• Regulated asbestos-containing material (RACM) - (a) Friable asbestos material, (b) Category I non-friable ACM that has become friable, (c) Category I non-friable ACM that will be or has been subjected to sanding, grinding, cutting, or abrading, or (d) Category II non-friable ACM that has a high probability of becoming or has become crumbled, pulverized, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations regulated by this subpart.

Potential asbestos exposure in construction is regulated when construction, alteration, repair, maintenance, renovation or demolition of structures, substrates, or portions thereof contain asbestos. For the purpose of this report, materials with any detectable concentration of asbestos are considered positive.

Sampling and Analysis Stantec conducted a pre-renovation survey of materials at the Property in order to identify suspect ACMs in general accordance with the AHERA sampling guidelines as outlined in 40 CFR Part 763. The location, condition, friability, and the potential for suspect ACMs to be impacted (i.e., disturbed) was assessed and documented. Bulk samples of readily accessible suspect ACMs were collected. Consistent with building demolition and renovation regulatory requirements, building material sampling was conducted regardless of the age and/or condition of the structure. A total of 63 bulk samples were collected from 17 homogeneous areas within the Property. The samples were analyzed by PLM in accordance with the EPA “Method for the Determination of Asbestos in Bulk Building Materials” (EPA/600/R93/116, July 1993). Analysis was performed by EMSL Analytical, Inc. (EMSL) located in Piscataway, New Jersey. This laboratory is participating in the National Voluntary Laboratory Accreditation Program (NVLAP). Additionally, EMSL is also accredited by the American Industrial Hygiene Association (AIHA).

A summary of the asbestos laboratory analytical results is included in Table 1 in Attachment A. The summary table includes the asbestos analytical results of all materials sampled as a part of this survey with details including location, quantity, and type of ACM identified. A sample location figure is provided in Attachment B; a photographic log is provided in Attachment C; laboratory analytical results and bulk sample logs are provided in Attachment D; and personnel and laboratory accreditations are provided in Attachment E.

Findings Based on the findings of this survey, none of the materials sampled and analyzed contain asbestos.

SUSPECT LEAD BASED PAINTS

Lead is a potential health hazard. Its condition, handling and disposal are regulated by federal, state, and local agencies. Lead in paint generally does not pose a health threat unless the material is disturbed or sufficiently deteriorated to produce dust, which may become airborne and inhaled or ingested. Contractors working in the facility should be informed of the type and the location of lead-containing materials.

Applicable OSHA regulations may apply depending on the work being performed.

The United States Department of Housing and Urban Development (HUD) Title X pertains to target housing and child-occupied facilities and is enforced by the EPA. Although the Property is not target housing or a child-occupied facility, Title X was followed as general guidelines. Pursuant to Title X regulations, LBP is defined as paint or other surface coatings that contain lead equal to or in excess of one milligram per square centimeter (1.0 mg/cm2) or more than 0.5 percent by weight. Additionally, worker exposure to materials containing lead during construction work is regulated by the Federal OSHA [29 CFR 1926.62(a)].

This regulation requires worker protection during construction “…where lead or materials containing lead are present.”

Sampling and Analysis Stantec assessed the condition of painted surfaces of the Property and collected paint samples of painted surfaces observed to be in fair and/or poor condition as defined within Chapter 5 of the HUD guidelines. In addition to paint observed to be in fair or poor condition, bulk samples were collected of the predominant paint at the Property. The definitions of paint condition are dependent on the location of the paint and component involved. The following table defines HUD categories for paint condition under various circumstances.

HUD Categories of Paint Film Quality

Type of Building Component Total Area of Deteriorated Paint

Intact Fair Poor

Exterior components with large surface areas. Entire Surface is Intact. Less than or equal to 10 square feet.

More than 10 square feet.

Interior components with large surface areas (walls, ceilings, floors, doors).

Entire Surface is Intact. Less than or equal to 2 square feet. More than 2 square feet.

Interior and exterior components with small surface areas (windowsills, baseboards, soffits, trim).

Entire Surface is Intact.

Less than or equal to 10 percent of the total surface area of the component.

More than 10 percent of the total surface area of the component.

Paint samples were collected by removing the material using hand tools to extract representative pieces.

Hard-sided containers were used to contain the samples of suspect materials. A unique sample number was assigned to each sample.

A total of eight bulk paint samples were collected from the Property. The samples were analyzed using flame atomic absorption spectrometry following the EPA SW 846 3050B/7000B analytical protocol. The samples were submitted to EMSL in Cinnaminson, New Jersey. This laboratory is accredited by the AIHA under the ELAP for bulk paint/coating analysis. Additionally, EMSL is also accredited A2LA.

Findings Based on the findings of this survey, the following paints sampled had detectable concentrations of lead above the laboratory reporting limit that would require compliance with worker protection regulations.

• Brown paint, located on railings and walls.

• White paint, located on exterior walls.

Table 2 in Attachment A presents a summary of the lead analytical results from paint sampled at the Property and sample locations. A sample location figure is provided in Attachment B; a photographic log is provided in Attachment C; laboratory analytical results and bulk sample logs are provided in Attachment D.

OTHER HAZARDOUS MATERIALS

Stantec performed a visual inspection of the Property for the presence of other hazardous materials and Universal Wastes [pursuant to 40 CFR 273.9 and 40 CFR 260.10]. The survey was limited to above grade only and did not include a soil or subsurface investigation. Materials evaluated as part of this inspection included: polychlorinated biphenyl (PCB)-containing units such as lighting ballasts and PCB-containing electrical units (i.e., electrical transformers); lead-containing units such as car batteries or emergency exit sign batteries; fluorescent lighting tubes; mercury-containing units such as light switches and thermostats;

refrigerants, halon, and other Chlorofluorocarbons (CFCs) such as fire extinguishing systems and Freon™ used in association with building drinking fountains; heavy metals as may be found in cooling tower water treatment systems; solvents, paints, fuel (storage tanks), lubricants, and other associated maintenance and cleaning products; radioactive materials that may be contained in units such as smoke detectors, or medical equipment; office materials, supplies, and equipment such as computer monitors and printing supplies, and miscellaneous materials such as unlabeled materials or substances of concern. Stantec’s visual inspection was limited to fixtures and equipment in the Property that were readily accessible. Assessment of these hazardous materials was based solely on the identification placards on the equipment or general knowledge of historical use. If the presence and/or absence of a material was not clearly marked, then the piece of equipment was assumed to contain a concentration of the material in question. No sample collection was performed in the process of identifying other hazardous materials or Universal Wastes.

PCBs in Dielectric Fluid or Fluorescent Lighting Ballasts Although no longer commercially produced in the United States, PCBs may be present in products and materials produced before the 1979 PCB ban. Historically some electrical components used PCBs within the dielectric fluid (transformers, ballasts, capacitors, etc.). As such, if these components are present and are not labeled “No PCBs”, they must be disposed of in accordance with current environmental regulations.

Fluorescent light fixtures were not observed within accessible areas of the Property.

Mercury According to the EPA, fluorescent light bulbs contain varying amounts of mercury and can be hazardous to the environment if they are disposed of improperly. Therefore, the EPA encourages the recycling of mercury-containing light bulbs, regardless of the mercury content. Fluorescent light fixtures were not observed within accessible areas of the Property.

Older style, “silent” light switches and analog thermostat boxes are also known to have varying amounts of mercury contained in ampules that act as an electronic switch. It is not expected that mercury-containing light switches or thermostats will be encountered; however, care should be taken when removing potential mercury-containing equipment to ensure no mercury ampules are present.

Ozone-Depleting Substances The EPA requires the recovery and recycling of refrigerant under the Clean Air Act (40 CFR Part 82, Subpart F). Heating, ventilation, and air conditioning (HVAC) units were observed at the Property and are assumed to contain ozone depleting refrigerant (i.e., Freon™).

Batteries Batteries are required to be recycled and/or disposed of in accordance with applicable hazardous waste regulations. Illuminated exit signs were observed within the Property and may contain batteries.

Radioactive Materials The federal Nuclear Regulatory Commission regulations (10 CFR Part 31.5) provides for the protection of the health and safety of workers and the public from ionizing radiation. Smoke detectors typically utilize a small radioactive source as a key component in detecting smoke particles. EPA regulations require smoke detectors to be disposed of at a nuclear waste facility or returned directly to the manufacturer. Smoke detectors were observed at the Property.

Miscellaneous The following miscellaneous items were observed at the Property at the time of the survey:

• Fire alarms equipped with lights, fire extinguishers, and miscellaneous janitorial cleaning products were observed.

MICROBIAL GROWTH

Mold is ubiquitous in the environment. In order to grow and flourish, mold requires moisture and an organic food source. As such, mold may thrive in areas of water leaks or condensation such as in HVAC systems, roof leaks, sprinkler systems, coolers, refrigeration units, sinks, bathrooms, showers, etc.

Stantec conducted a visual assessment for conditions that would be conducive for microbial growth within accessible areas of the Property. Due to occupancy, Stantec was limited to viewing five dormitory rooms, their associated common bathrooms, and common areas of the Property. Apparent water intrusion and mold was observed above ceiling access panels in all five dormitory “A” spaces accessed. Mold was also observed within wall cavities of two “A” spaces, where portions of the wall had previously been removed.

Water intrusion in the “A” spaces appeared to be related to HVAC condensation and seems to have affected approximately 100% of the walls and ceilings in these areas. Based upon these findings, it is likely this scenario exists in other dormitory rooms throughout the building. Additionally, moisture intrusion may not be limited to the “A” spaces, but could extend beyond into bathrooms and main portions of the dormitory rooms. Stantec also noted the presence of dehumidifying units in each dormitory room observed.

A photographic log is provided in Attachment C.

RECOMMENDATIONS

Asbestos-Containing Materials Based on the findings of this survey, ACMs were not identified. Table 1 within Attachment A presents a summary of the asbestos analytical results of materials sampled as a part of this survey. No additional assessment appears to be warranted at this time. It should be noted however that the asbestos inspection was limited to accessible materials only and did not include underground utilities. Historically, certain underground utility piping has been known to contain asbestos (e.g., Transite pipe). If renovation/demolition of the Property includes removal of onsite portions of underground utilities (storm drains, sewer, domestic water laterals, etc.) or any other suspect material not included within this report, evaluation of the asbestos content of these components must be performed prior to the removal process or be assumed positive for asbestos.

Lead-Based Paint Based on the findings of this survey, lead-containing paint was identified which would require compliance with the Federal OSHA 29 CFR 1926.62. It is recommended that the lead-containing paint be stabilized prior to renovation, refurbishing, or demolition activities. The paint stabilization work should be performed by Licensed Contractors who maintain appropriately trained and certified lead workers.

In general, bulk demolition wastes do not exhibit sufficient lead concentration to be classified as a hazardous waste based on the bulk weight of the waste in comparison to the weight of lead in the painted surface. However, if the paint is stripped, the paint and stripping media may be classified as a hazardous waste and regulations controlling the generation, storage, treatment, transportation, and disposal of lead containing hazardous waste need to be implemented and observed. Additional health and safety requirements and protocols may also be required to prevent exposure and spreading of the waste material.

Ceramic tile was observed at the Property during the survey. Stantec did not collect samples of the tiles as it would cause irreparable damage to the material. Ceramic tile has been known to contain lead glazing.

Consideration should be taken during activities involving disturbing the tiles.

Other Hazardous Materials There are a variety of items within the Property that may contain PCBs, mercury, or are identified to be a Universal Waste. It is recommended that these materials be handled and disposed of in accordance with applicable EPA regulations (40 CFR 273.9 and 40 CFR 260.10). Additionally, EPA regulations require Freon™ related work be performed by EPA certified personnel.

Microbial Growth Areas of microbial growth were observed at the Property. Repairs of moisture intrusion sources and removal of impacted building materials, by qualified contractors, are recommended.

LIMITATIONS

Reasonable efforts have been made by Stantec personnel to locate, sample, and/or identify suspect ACMs, LBP, microbial growth, and other hazardous materials associated with the Property. For any facility, the existence of unique or concealed materials and debris is a possibility. In addition, sampling and laboratory analysis constraints typically hinder the investigation. Stantec does not warrant, guarantee or profess to have the ability to locate or identify all hazardous materials in a facility. The survey is limited in nature, as only full demolition of the Property will reveal all concealed conditions. Additionally, exterior finishes and roofs not included in this survey may contain asbestos. If renovation/demolition of portions of the Property includes removal of on-site portions of underground utilities (storm drains, sewer, domestic water laterals, etc.), or materials not included in this survey, evaluation of the asbestos content of these components must be performed prior to the removal process. Suspect materials identified in these locations are assumed positive for asbestos until sampling and analysis indicates otherwise. Stantec cannot warrant the effectiveness or damage thereof, at any of the patches or temporary repairs performed at sampling locations (walls, ceilings, or floors). This report is intended for use in planning based on the agreed upon scope of work. This report is not intended to be a bidding document. Quantities of materials identified are estimates only and would need to be verified by contractors bidding on future work. If, during the course of a renovation/demolition project, suspect ACMs, LBPs or any other suspect hazardous materials are discovered that are not included within this report, those materials should be treated accordingly until additional sampling, analysis, and/or assessment can be performed.

Additionally, the passage of time may result in a change in the environmental characteristics at the Property. This report does not warrant against future operations or conditions that could affect the recommendations made. The results, findings, conclusions and recommendations expressed in this report are based only on conditions that were observed during Stantec’s survey of the Property and test results provided by EMSL Analytical, Inc. These observations are time dependent, are subject to changing site conditions, and revisions to federal, state, and local regulations. Reliance on this letter report by Third Parties (i.e., other than the Baker+Stanley+Cardno JV) shall be at the Third Party's sole risk.

If you have any questions regarding this report or require further clarification, please do not hesitate to contact the Stantec personnel identified below.

Regards, Stantec Consulting Services Inc.

Prepared by: Reviewed by:

Jennifer Alvarado Audrey Lundin Associate Scientist AHERA Building Inspector & Management Planner Phone: (805) 798-3841 Senior Environmental Scientist Jenny.Alvarado@stantec.com Phone: (925) 627-4573 Audrey.Lundin@stantec.com

Approved by:

Jason Stagno AHERA Building Inspector & Management Planner EPA Lead Paint Risk Assessor Principal Scientist Phone: (805) 630-8648 Jason.Stagno@stantec.com

Attachments: A: Tables 1 and 2 – Summary of Analytical Results B: Sample Location Figure C: Photographic Log D: Laboratory Analytical Reports and Bulk Sample Logs E: Personnel and Laboratory Accreditations mailto:Jenny.Alvarado@stantec.com mailto:Jennifer.Alvarado@stantec.com mailto:Jason.Stagno@stantec.com

Attachment A Tables 1 and 2 – Summary of Analytical

Results

Table 1 Summary of Asbestos Results

Building 2424 United States Air Force, Joint Base McGuire-Dix-Lakehurst, New Jersey, USA

Building Sample No. Homogeneous Area Location of Material Asbestos Content Condition OSHA Definition EPA Category

2424-01A 2424-01B 2424-01C 2424-01D 2424-01E 2424-01F 2424-01G 2424-01A 2424-01B 2424-01C 2424-01D 2424-01E 2424-01F 2424-01G 2424-02A 2424-02B 2424-02C 2424-02A 2424-02B 2424-02C 2424-03A 2424-03B 2424-03C 2424-03A 2424-03B 2424-03C 2424-04A 2424-04B 2424-04C 2424-04D 2424-04E 2424-04F 2424-04G 2424-05A 2424-05B 2424-05C 2424-06A 2424-06B 2424-06C 2424-07A 2424-07B 2424-07C 2424-08A 2424-08B 2424-08C 2424-09A 2424-09B 2424-09C 2424-10A 2424-10B 2424-10C 2424-11A 2424-11B 2424-11C 2424-12A 2424-12B 2424-12C 2424-13A 2424-13B 2424-13C 2424-14A 2424-14B 2424-14C

NA

ND = Non Detect

NA = Not Applicable

SF = Square Feet

Notes:

ACM = Asbestos-Containing Material

Throughout InteriorJoint Compound, White, Associated with Drywall ND Good NA NA

NA

Glue, Yellow, Associated with Carpets Common Area, Except Mechanical Room ND Good NA

Grout, White, Associated with Bathroom Showers Dormitory Rooms NA NA

Caulking, Gray, Exterior Fascia and Ceilings Along Balcony ND

Glue, Clear/Beige, Associated with Tan Cove Base

Throughout Common Areas, Except Bathrooms and

Mechanical Room

ND

Dormitory Rooms ND Good NA NA

Ceiling Texture, White

Cove Base, Blue Dormitory Rooms ND Good

Good NA NA

NA NA

Glue, Clear/Beige, Associated with Blue Cove Base

NA

ND Good

Throughout Common Areas, Except Bathrooms and

Mechanical Room ND Good NA

Good

NA

Interior of Window Frames ND NA NA

Sidewalks Throughout Property ND

NA

Good

NA

Dormitory Rooms ND Good NA NA

Caulk, Black Exterior of Dormitory Windows ND Good NA NA

NA

NA

Interior Door Frames ND

NA

Good

Good

NA

Caulk, Black, Associated with Exterior Masonry

Between Concrete Masonry Unit Columns and Overhead

Beams

ND NA

2424 Drywall, Gray/Tan Throughout Interior ND Good NA NA

2424 Cove Base, Tan

2424 Glue, Green, Associated with 24" x 24" Carpet Tiles Dormitory Rooms GoodND NA

NA

Caulk, White

Caulking, White, Associated with Expansion Joints

Good

Caulk, Black

2424 Caulking, White, Associated with Bathroom Showers Dormitory Rooms ND Good NA

Table 2 Summary of Paint Results

Building 2424 United States Air Force, Joint Base McGuire-Dix-Lakehurst, New Jersey, USA

Building Sample No.

Sample Location

Paint Color

Substrate Material

Paint Condition

Quantity Estimate

Lead Content

2424-P01 Third Floor Mechanical Room Walls - East Wing White Drywall Intact - <0.0080%

(<80 ppm)

2424-P02 Recreation Center (Main Room) Walls White Drywall Intact - <0.0080%

(<80 ppm)

2424-P03 Recreation Center Walls Blue/Off-White Drywall Intact - <0.0080% (<80 ppm)

2424-P04 Recreation Center (Game Room) Walls Red Drywall Intact - <0.0080%

(<80 ppm)

2424-P05 Exterior Railing Brown Metal Fair 600 SF 0.011% (110 ppm)

2424-P06 Exterior Walls White Concrete Fair 3,000 SF 0.023% (230 ppm)

2424-P07 Game Room Ceiling White Drywall Intact - <0.0080% (<80 ppm)

2424-P08 Unit 108 - Kitchen Wall White Drywall Intact - <0.0080% (<80 ppm)

Red Bold = Paint contains detectable concentration of lead

Notes:

ppm = parts per million

SF = square feet

Attachment B Sample Location Figure

AutoCAD SHX Text

WING 2

AutoCAD SHX Text

WING 1

AutoCAD SHX Text C01

AutoCAD SHX Text C07

AutoCAD SHX Text C11

AutoCAD SHX Text C09

AutoCAD SHX Text C10

AutoCAD SHX Text C02

AutoCAD SHX Text C04

AutoCAD SHX Text C06

AutoCAD SHX Text C05

AutoCAD SHX Text C03

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 143A

AutoCAD SHX Text 144A

AutoCAD SHX Text 146A

AutoCAD SHX Text 145A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 147A

AutoCAD SHX Text 148A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 150A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 152A

AutoCAD SHX Text 151A

AutoCAD SHX Text 149A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 156A

AutoCAD SHX Text 155A

AutoCAD SHX Text 153A

AutoCAD SHX Text 154A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 141A

AutoCAD SHX Text 142A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

FIRST FLOOR PLAN

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 105A

AutoCAD SHX Text 106A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 108A

AutoCAD SHX Text 107A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

CL.

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

JANITOR

AutoCAD SHX Text

WOMENS

AutoCAD SHX Text

MENS

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

MECH/ELECT

AutoCAD SHX Text

GAME ROOM

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

LINEN

AutoCAD SHX Text

TELE/VEND

AutoCAD SHX Text 133A

AutoCAD SHX Text 135A

AutoCAD SHX Text 127A

AutoCAD SHX Text 138A

AutoCAD SHX Text 140A

AutoCAD SHX Text 139A

AutoCAD SHX Text

AutoCAD SHX Text 101A

AutoCAD SHX Text 102A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 111A

AutoCAD SHX Text 112A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 110A

AutoCAD SHX Text 109A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 103A

AutoCAD SHX Text 104A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 113A

AutoCAD SHX Text 114A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CLOSET

AutoCAD SHX Text C12

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text C08

AutoCAD SHX Text

LOUNGE

AutoCAD SHX Text

PLANTER

AutoCAD SHX Text

PLANTER

AutoCAD SHX Text

PLANTING

AutoCAD SHX Text

KITCHEN

AutoCAD SHX Text

VENDING

AutoCAD SHX Text

STAIR A

AutoCAD SHX Text

LOCKER

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

AutoCAD SHX Text

LOCKER

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

STUDY

AutoCAD SHX Text

LAUNDRY ROOM

AutoCAD SHX Text

AutoCAD SHX Text 115A

AutoCAD SHX Text 116A

AutoCAD SHX Text 117A

AutoCAD SHX Text 118A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 119A

AutoCAD SHX Text 120A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 121A

AutoCAD SHX Text 122A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 123A

AutoCAD SHX Text 124A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 125A

AutoCAD SHX Text 126A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 127A

AutoCAD SHX Text 128A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

COMMON

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text 2424-09C

AutoCAD SHX Text 2424-04G

AutoCAD SHX Text 2424-09B

AutoCAD SHX Text

2424-01A (DRYWALL) 2424-01A (JOINT COMPOUND)

AutoCAD SHX Text

2424-01B (DRYWALL) 2424-01A (JOINT COMPOUND)

AutoCAD SHX Text

2121-02B (COVE BASE) 2121-02B (GLUE) 2121-02C (COVE BASE) 2121-02C (GLUE)

AutoCAD SHX Text 2424-10A

AutoCAD SHX Text 2424-06A

AutoCAD SHX Text 2424-06B

AutoCAD SHX Text 2424-11A 2424-11B 2424-11C

AutoCAD SHX Text

2121-02A (COVE BASE) 2121-02A (GLUE)

AutoCAD SHX Text 2424-P03

AutoCAD SHX Text 2424-P02

AutoCAD SHX Text 2424-P07

AutoCAD SHX Text 2424-P05

AutoCAD SHX Text 2424-P04

AutoCAD SHX Text 2424-P06

AutoCAD SHX Text 2424-07A

AutoCAD SHX Text 2424-07C

AutoCAD SHX Text 2424-10B

AutoCAD SHX Text 2424-12A

AutoCAD SHX Text 2424-01C (DRYWALL) 2424-01C (JOINT COMPOUND) 2424-01D (DRYWALL) 2424-01D (JOINT COMPOUND) 2424-01E (DRYWALL) 2424-01E (JOINT COMPOUND)

AutoCAD SHX Text 2424-05A 2424-05B

AutoCAD SHX Text 2424-04A

AutoCAD SHX Text 2424-P08

AutoCAD SHX Text 2424-04C

AutoCAD SHX Text

2424-03C (COVE BASE) 2424-03C (GLUE)

AutoCAD SHX Text 2424-12C 2424-13C

AutoCAD SHX Text

2424-03A (COVE BASE) 2424-03A (GLUE)

AutoCAD SHX Text 2424-10C

AutoCAD SHX Text 2424-08C

AutoCAD SHX Text 2424-12B 2424-13A 2424-13B

AutoCAD SHX Text 2424-09A

AutoCAD SHX Text 2424-08A 2424-08B

AutoCAD SHX Text

2424-03B (COVE BASE) 2424-03B (GLUE)

AutoCAD SHX Text 2424-04B

AutoCAD SHX Text 2424-06C

AutoCAD SHX Text 2424-07B

AutoCAD SHX Text 2424-04D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 307A

AutoCAD SHX Text 308A

AutoCAD SHX Text 306A

AutoCAD SHX Text 305A

AutoCAD SHX Text 349A

AutoCAD SHX Text 351A

AutoCAD SHX Text 350A

AutoCAD SHX Text 352A

AutoCAD SHX Text 354A

AutoCAD SHX Text 356A

AutoCAD SHX Text 355A

AutoCAD SHX Text 353A

AutoCAD SHX Text 348A

AutoCAD SHX Text 346A

AutoCAD SHX Text 347A

AutoCAD SHX Text 345A

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

JAC. CL.

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

TELE/VEND

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

STAIR A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 337A

AutoCAD SHX Text 338A

AutoCAD SHX Text 340A

AutoCAD SHX Text 339A

AutoCAD SHX Text 341A

AutoCAD SHX Text 342A

AutoCAD SHX Text 344A

AutoCAD SHX Text 343A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 314A

AutoCAD SHX Text 313A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 304A

AutoCAD SHX Text 303A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 301A

AutoCAD SHX Text 302A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 309A

AutoCAD SHX Text 310A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 312A

AutoCAD SHX Text 311A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

LOCKER

AutoCAD SHX Text

LOCKER

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

LAUNDRY ROOM

AutoCAD SHX Text

LOUNGE

AutoCAD SHX Text

OPEN TO

AutoCAD SHX Text

BELOW

AutoCAD SHX Text 316A

AutoCAD SHX Text

AutoCAD SHX Text 318A

AutoCAD SHX Text 315A

AutoCAD SHX Text 317A

AutoCAD SHX Text

AutoCAD SHX Text 320A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 322A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 324A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 326A

AutoCAD SHX Text

AutoCAD SHX Text 328A

AutoCAD SHX Text 319A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 321A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 323A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 325A

AutoCAD SHX Text

AutoCAD SHX Text 327A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

THIRD FLOOR PLAN

AutoCAD SHX Text

LOCKER

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

AutoCAD SHX Text

2424-01G (DRYWALL) 2424-01G (JOINT COMPOUND)

AutoCAD SHX Text 2424-P01

AutoCAD SHX Text 2424-14A

AutoCAD SHX Text 2424-05C

AutoCAD SHX Text 2424-14B

AutoCAD SHX Text

2424-01F (DRYWALL) 2424-01F (JOINT COMPOUND)

AutoCAD SHX Text 2424-04E 2424-04F

AutoCAD SHX Text 2424-14C

AutoCAD SHX Text

REV NO.

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

APP'D

AutoCAD SHX Text

CHK'D

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

DWG DATE

AutoCAD SHX Text

DWN BY

AutoCAD SHX Text

SHEET TITLE

AutoCAD SHX Text 27 September 2023

AutoCAD SHX Text C:\Cadd\JBMDL Field\Figure 2424 1-3.dwg

AutoCAD SHX Text Plot Date & Time:

AutoCAD SHX Text

12:10 PM

AutoCAD SHX Text

PROJECT NO.

AutoCAD SHX Text

PROJECT TITLE

AutoCAD SHX Text

PRIME CONSULTANT

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

REV

AutoCAD SHX Text

REVISION DESCRIPTION

AutoCAD SHX Text

DWN

AutoCAD SHX Text

APP

AutoCAD SHX Text

REV DATE

AutoCAD SHX Text

SUB CONSULTANT

AutoCAD SHX Text

BUILDING 2424

AutoCAD SHX Text

SAMPLE LOCATION MAP

AutoCAD SHX Text

SMT

AutoCAD SHX Text

JS

AutoCAD SHX Text

JS

AutoCAD SHX Text 09/07/2023

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

FIGURE 1

AutoCAD SHX Text

JOINT BASE

AutoCAD SHX Text

MCGUIRE-DIX-LAKEHURST, NJ

AutoCAD SHX Text 185806149

AutoCAD SHX Text

HAZMAT SURVEY

AutoCAD SHX Text

NON ASBESTOS - CONTAINING SAMPLE LOCATION

AutoCAD SHX Text

ASBESTOS - CONTAINING SAMPLE LOCATION

AutoCAD SHX Text

PAINT CHIP SAMPLE LOCATION (NO LEAD DETECTED)

AutoCAD SHX Text

PAINT CHIP SAMPLE LOCATION (LEAD - CONTAINING)

AutoCAD SHX Text

NOTE: NO SAMPLES WERE COLLECTED FROM SECOND FLOOR.

Attachment C Photographic Log

Photographs of the Property Site Name: Building 2424 – United States Air Force, Joint Base McGuire, Dix, Lakehurst, New Jersey Photographer: T. Causey and J. Davis/Stantec Consulting Services Inc.

Date: July 26, 2023

Photo #1 View of Building 2424 exterior.

Photo #2 View of a typical dormitory room within Building 2424.

http://www.stantec.com/

Photographs of the Property Site Name: Building 2424 – United States Air Force, Joint Base McGuire, Dix, Lakehurst, New Jersey Photographer: T. Causey and J. Davis/Stantec Consulting Services Inc.

Date: July 26, 2023

Photo #3 View of a mechanical room within Building 2424.

Photo #4 View of rust, indicating water damage, at a panel within a dormitory room.

http://www.stantec.com/

Attachment D Laboratory Analytical Reports and Bulk

Sample Logs

EMSL Analytical, Inc.

200 Route 130 North Cinnaminson, NJ 08077

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042318235EMSL Order:

Customer ID: 32SCOE63

Customer PO: 185806149.202

Project ID:

Attention: Phone:Jason Stagno

Fax:Stantec Consulting Services Inc.

Received Date:290 Conejo Ridge Avenue 07/26/2023 4:30 PM

Analysis Date:Thousand Oaks, CA 91361 07/28/2023 - 08/02/2023

Collected Date: 07/26/2023

Project: 185806149.202 / JBMDL Survey / B2424 / Joint Base McGuire / Dis, Lakehurst, New Jersey

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

2424-01A-Drywall

042318235-0001

None DetectedQuartz

Ca Carbonate

Gypsum

Non-fibrous (Other)

3%

12%

65%

10%

Cellulose10%Gray/Tan

Fibrous

Heterogeneous

(1) Mechanical Room

- Common Area -

White Drywall

HA: 2424-01

2424-01A-Joint

Compound

042318235-0001A

None DetectedQuartz

Ca Carbonate

Mica

Non-fibrous (Other)

3%

82%

3%

12%

Cellulose<1%White

Non-Fibrous

Homogeneous

(1) Mechanical Room

- Common Area -

Joint Compound

HA: 2424-01

2424-01B-Drywall

042318235-0002

None DetectedQuartz

Ca Carbonate

Gypsum

Non-fibrous (Other)

3%

12%

60%

13%

Cellulose12%Gray/Tan

Fibrous

Heterogeneous

(1) Corridor C06 -

Common Area -

White Drywall

HA: 2424-01

02424-0B Joint

Comound

042318235-0002A

None DetectedQuartz

Ca Carbonate

Mica

Non-fibrous (Other)

3%

80%

3%

14%

Cellulose<1%White

Non-Fibrous

Homogeneous

(1) Corridor C06 -

Common Area - Joint

Compound

HA: 2424-01

2424-01C-Drywall

042318235-0003

None DetectedQuartz

Ca Carbonate

Gypsum

Non-fibrous (Other)

3%

12%

65%

15%

Cellulose5%Gray/Tan

Fibrous

Heterogeneous

(1) 108 - Kitchen -

White Drywall

HA: 2424-01

2424-01C-Joint

Compound

042318235-0003A

Layer Not Present(1) 108 - Kitchen -

Joint Compound

HA: 2424-01

2424-01D-Drywall

042318235-0004

None DetectedQuartz

Ca Carbonate

Gypsum

Non-fibrous (Other)

3%

12%

60%

13%

Cellulose12%Gray/Tan

Fibrous

Heterogeneous

(1) 108 - Kitchen -

White Drywall

HA: 2424-01

2424-01D-Joint

Compound

042318235-0004A

None DetectedQuartz

Ca Carbonate

Mica

Non-fibrous (Other)

3%

82%

3%

12%

Cellulose<1%White

Non-Fibrous

Homogeneous

(1) 108 - Kitchen -

Joint Compound

HA: 2424-01

2424-01E-Drywall

042318235-0005

None DetectedQuartz

Ca Carbonate

Gypsum

Non-fibrous (Other)

3%

12%

60%

15%

Cellulose10%Gray/Tan

Fibrous

Heterogeneous

(1) 108 - Kitchen -

White Drywall

HA: 2424-01

2424-01E-Joint

Compound

042318235-0005A

None DetectedQuartz

Ca Carbonate

Mica

Non-fibrous (Other)

3%

82%

3%

12%

Cellulose<1%Beige

Non-Fibrous

Homogeneous

(1) 108 - Kitchen -

Joint Compound

HA: 2424-01

Initial report from: 08/02/2023 11:56:02

Page 1 of 6ASB_PLM_0008_0001 - 1.78 Printed: 8/2/2023 11:56 AM

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042318235EMSL Order:

Customer ID: 32SCOE63

Customer PO: 185806149.202

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

2424-01F-Drywall

042318235-0006

None DetectedQuartz

Ca Carbonate

Gypsum

Non-fibrous (Other)

2%

11%

67%

10%

Cellulose10%Gray/Tan

Fibrous

Homogeneous

(3) 302 - Closet -

White Drywall

HA: 2424-01

2424-01F-Joint

Compound

042318235-0006A

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

83%

15%

Cellulose<1%White

Non-Fibrous

Homogeneous

(3) 302 - Closet -

Joint Compound

HA: 2424-01

2424-01G-Drywall

042318235-0007

None DetectedQuartz

Ca Carbonate

Gypsum

Non-fibrous (Other)

3%

12%

64%

9%

Cellulose12%Gray/Tan

Non-Fibrous

Homogeneous

(3) Mechanical Room

- White Drywall

HA: 2424-01

2424-01G-Joint

Compound

042318235-0007A

Layer Not Present(3) Mechanical Room

- Joint Compound

HA: 2424-01

2424-02A-Cove Base

042318235-0008

None DetectedCa Carbonate

Non-fibrous (Other)

65%

35%

Tan

Non-Fibrous

Homogeneous

(1) Common Area -

Core Room - Tan

Cove Base

HA: 2424-02

2424-02A-Glue

042318235-0008A

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

35%

63%

Beige

Non-Fibrous

Homogeneous

(1) Common Area -

Core Room - Clear

Cove Base Glue

HA: 2424-02

2424-02B-Cove Base

042318235-0009

None DetectedCa Carbonate

Non-fibrous (Other)

68%

32%

Tan

Non-Fibrous

Homogeneous

(1) Common Area -

Corridor C06 - Tan

Cove Base

HA: 2424-02

2424-02B-Glue

042318235-0009A

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

40%

58%

Beige

Non-Fibrous

Homogeneous

(1) Common Area -

Corridor C06 - Clear

Cove Base Glue

HA: 2424-02

2424-02C-Cove Base

042318235-0010

None DetectedCa Carbonate

Non-fibrous (Other)

50%

50%

Tan

Non-Fibrous

Homogeneous

(1) Common Area -

Corridor C06 - Tan

Cove Base

HA: 2424-02

2424-02C-Glue

042318235-0010A

None DetectedCa Carbonate

Non-fibrous (Other)

40%

60%

Beige

Non-Fibrous

Homogeneous

(1) Common Area -

Corridor C06 - Clear

Cove Base Glue

HA: 2424-02

2424-03A-Cove Base

042318235-0011

None DetectedCa Carbonate

Non-fibrous (Other)

45%

55%

Blue

Non-Fibrous

Homogeneous

(1) 103 - Main Room -

Blue Cove Base

HA: 2424-03

2424-03A-Glue

042318235-0011A

Layer Not Present(1) 103 - Main Room -

Cove Base Glue

HA: 2424-03

2424-03B-Cove Base

042318235-0012

None DetectedCa Carbonate

Non-fibrous (Other)

55%

45%

Black

Non-Fibrous

Homogeneous

(1) 118 - Bathroom -

Blue Cove Base

HA: 2424-03

2424-03B-Glue

042318235-0012A

None DetectedCa Carbonate

Non-fibrous (Other)

35%

65%

Beige

Non-Fibrous

Homogeneous

(1) 118 - Bathroom -

Cove Base Glue

Page 2 of 6ASB_PLM_0008_0001 - 1.78 Printed: 8/2/2023 11:56 AM

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042318235EMSL Order:

Customer ID: 32SCOE63

Customer PO: 185806149.202

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

HA: 2424-03

2424-03C-Cove Base

042318235-0013

None DetectedCa Carbonate

Non-fibrous (Other)

60%

40%

Cellulose<1%Black

Non-Fibrous

Homogeneous

(1) 103 - Bathroom -

Blue Cove Base

HA: 2424-03

2424-03C-Glue

042318235-0013A

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

62%

36%

Cellulose<1%Tan

Non-Fibrous

Homogeneous

(1) 103 - Bathroom -

Cove Base Glue

HA: 2424-03

2424-04A

042318235-0014

None DetectedGypsum

Non-fibrous (Other)

65%

17%

Cellulose18%White

Fibrous

Homogeneous

(1) 108 - Main - White

Textured Ceiling

HA: 2424-04

2424-04B

042318235-0015

None DetectedCa Carbonate

Gypsum

Non-fibrous (Other)

20%

50%

15%

Cellulose15%Gray/White

Fibrous

Heterogeneous

(1) 118 - Main - White

Textured Ceiling

HA: 2424-04

2424-04C

042318235-0016

None DetectedCa Carbonate

Non-fibrous (Other)

70%

16%

Cellulose14%White

Fibrous

Homogeneous

(1) 103 - Main - White

Textured Ceiling

HA: 2424-04

2424-04D

042318235-0017

None DetectedGypsum

Non-fibrous (Other)

68%

16%

Cellulose16%White

Fibrous

Homogeneous

(1) 123 - Main - White

Textured Ceiling

HA: 2424-04

2424-04E

042318235-0018

None DetectedGypsum

Non-fibrous (Other)

72%

11%

Cellulose17%White

Fibrous

Homogeneous

(1) 302 - Main - White

Textured Ceiling

HA: 2424-04

2424-04F

042318235-0019

None DetectedCa Carbonate

Gypsum

Non-fibrous (Other)

12%

52%

16%

Cellulose20%White

Fibrous

Homogeneous

(1) 302 - Main - White

Textured Ceiling

HA: 2424-04

2424-04G

042318235-0020

None DetectedCa Carbonate

Gypsum

Non-fibrous (Other)

12%

52%

14%

Cellulose22%White

Fibrous

Homogeneous

(1) 133 - Main - White

Textured Ceiling

HA: 2424-04

2424-05A

042318235-0021

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

11%

15%

72%

Cellulose2%Yellow/Green

Non-Fibrous

Homogeneous

(1) 108 - Green

Carpet Glue associated w/24"x24"

Carpet Squares

HA: 2424-05

2424-05B

042318235-0022

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

6%

12%

82%

Cellulose<1%Yellow/Green

Non-Fibrous

Homogeneous

(1) 108 - Green

Carpet Glue associated w/24"x24"

Carpet Squares

HA: 2424-05

2424-05C

042318235-0023

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

12%

84%

Cellulose2%Green

Non-Fibrous

Homogeneous

(1) 302 - Green

Carpet Glue associated w/24"x24"

Carpet Squares

HA: 2424-05

2424-06A

042318235-0024

None DetectedCa Carbonate

Non-fibrous (Other)

3%

97%

Gray

Non-Fibrous

Homogeneous

Courtyard of Common

Area - White Exterior

Caulking at Sidewalk

Expansion Joint

HA: 2424-06

Page 3 of 6ASB_PLM_0008_0001 - 1.78 Printed: 8/2/2023 11:56 AM

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042318235EMSL Order:

Customer ID: 32SCOE63

Customer PO: 185806149.202

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

2424-06B

042318235-0025

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

3%

6%

91%

Gray

Non-Fibrous

Homogeneous

Courtyard of Common

Area - White Exterior

Caulking at Sidewalk

Expansion Joint

HA: 2424-06

2424-06C

042318235-0026

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

38%

60%

Cellulose<1%Gray

Non-Fibrous

Homogeneous

Outside Unit 120 -

White Exterior

Caulking at Sidewalk

Expansion Joint

HA: 2424-06

2424-07A

042318235-0027

None DetectedCa Carbonate

Non-fibrous (Other)

70%

30%

Black

Non-Fibrous

Homogeneous

(1) 104 - Window -

Black Exterior

Window Caulking

HA: 2424-07

2424-07B

042318235-0028

None DetectedCa Carbonate

Non-fibrous (Other)

72%

28%

Black

Non-Fibrous

Homogeneous

(1) 123 - Window -

Black Exterior

Window Caulking

HA: 2424-07

2424-07C

042318235-0029

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

3%

62%

35%

Black

Non-Fibrous

Homogeneous

(1) 108 - Window -

Black Exterior

Window Caulking

HA: 2424-07

2424-08A

042318235-0030

None DetectedCa Carbonate

Non-fibrous (Other)

74%

26%

Black

Non-Fibrous

Homogeneous

(1) 118 - White

Interior Window

Caulking

HA: 2424-08

2424-08B

042318235-0031

None DetectedCa Carbonate

Non-fibrous (Other)

77%

23%

Black

Non-Fibrous

Homogeneous

(1) 118 - White

Interior Window

Caulking

HA: 2424-08

2424-08C

042318235-0032

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

68%

30%

Black

Non-Fibrous

Homogeneous

(1) 103 - White

Interior Window

Caulking

HA: 2424-08

2424-09A

042318235-0033

None DetectedCa Carbonate

Non-fibrous (Other)

80%

20%

Black

Non-Fibrous

Homogeneous

(1) 118 - Black Door

Caulking at Door

Frame

HA: 2424-09

2424-09B

042318235-0034

None DetectedCa Carbonate

Non-fibrous (Other)

80%

20%

Black

Non-Fibrous

Homogeneous

(1) Locker Room 1A -

Black Door Caulking at Door Frame

HA: 2424-09

2424-09C

042318235-0035

None DetectedCa Carbonate

Non-fibrous (Other)

70%

30%

Black

Non-Fibrous

Homogeneous

(1) Mail Room - Black

Door Caulking at Door

Frame

HA: 2424-09

2424-10A

042318235-0036

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

70%

28%

Black

Non-Fibrous

Homogeneous

Courtyaard - Black

Exterior Masonry

Caulking

HA: 2424-10

2424-10B

042318235-0037

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

45%

53%

Black

Non-Fibrous

Homogeneous

Outside Room 108 -

Black Exterior

Masonry Caulking

HA: 2424-10

2424-10C

042318235-0038

None DetectedCa Carbonate

Non-fibrous (Other)

15%

85%

Black

Non-Fibrous

Homogeneous

Outside Room 103 -

Black Exterior

Masonry Caulking

HA: 2424-10

Page 4 of 6ASB_PLM_0008_0001 - 1.78 Printed: 8/2/2023 11:56 AM

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042318235EMSL Order:

Customer ID: 32SCOE63

Customer PO: 185806149.202

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

2424-11A

042318235-0039

None DetectedCa Carbonate

Non-fibrous (Other)

30%

70%

Synthetic<1%Yellow

Non-Fibrous

Homogeneous

Common Area - Core

Room - Yellow Carpet

Glue

HA: 2424-11

2424-11B

042318235-0040

None DetectedCa Carbonate

Non-fibrous (Other)

30%

70%

Cellulose

Synthetic

<1%

<1%

Yellow

Non-Fibrous

Homogeneous

Common Area -

Lounge - Yellow

Carpet Glue

HA: 2424-11

2424-11C

042318235-0041

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

7%

40%

53%

Cellulose<1%Yellow

Non-Fibrous

Homogeneous

Common Area -

Lounge - Yellow

Carpet Glue

HA: 2424-11

2424-12A

042318235-0042

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

45%

45%

10%

Cellulose<1%Gray

Non-Fibrous

Homogeneous

108 - White Grout in

Unit Bathrooms

HA: 2424-12

2424-12B

042318235-0043

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

45%

45%

10%

Cellulose<1%Gray

Non-Fibrous

Homogeneous

118 - White Grout in

Unit Bathrooms

HA: 2424-12

2424-12C

042318235-0044

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

38%

52%

10%

Cellulose<1%Beige

Non-Fibrous

Homogeneous

103 - White Grout in

Unit Bathrooms

HA: 2424-12

2424-13A

042318235-0045

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

70%

28%

Cellulose<1%White

Non-Fibrous

Homogeneous

103 - White Shower

Caulking at Tile in

Showers

HA: 2424-13

2424-13B

042318235-0046

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

2%

68%

30%

White

Non-Fibrous

Homogeneous

103 - White Shower

Caulking at Tile in

Showers

HA: 2424-13

2424-13C

042318235-0047

None DetectedQuartz

Ca Carbonate

Non-fibrous (Other)

3%

70%

27%

White

Non-Fibrous

Homogeneous

108 - White Shower

Caulking at Tile in

Showers

HA: 2424-13

2424-14A

042318235-0048

None DetectedCa Carbonate

Non-fibrous (Other)

60%

40%

Gray

Non-Fibrous

Homogeneous

(3) Balcony East Back

Side - Gray Exterior

Caulking

HA: 2424-14

2424-14B

042318235-0049

None DetectedCa Carbonate

Non-fibrous (Other)

55%

45%

Cellulose<1%Gray

Non-Fibrous

Homogeneous

(3) Balcony West

Front Side - Gray

Exterior Caulking

HA: 2424-14

2424-14C

042318235-0050

None DetectedCa Carbonate

Non-fibrous (Other)

3%

92%

Glass5%Gray

Fibrous

Homogeneous

(3) Balcony West

Front Side - Gray

Exterior Caulking

HA: 2424-14

Page 5 of 6ASB_PLM_0008_0001 - 1.78 Printed: 8/2/2023 11:56 AM

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042318235EMSL Order:

Customer ID: 32SCOE63

Customer PO: 185806149.202

Project ID:

Analyst(s)

Laurel Elkin (27)

Susan Pollack (33)

Samantha Rundstrom, Laboratory Manager or Other Approved Signatory

EMSL maintains liability limited to cost of analysis. Interpretation and use of test results are the responsibility of the client. This report relates only to the samples reported above, and may not be reproduced, except in full, without written approval by EMSL.