Attachment 2 - Statement of Work (SOW) - Amended 25 Aug 25.pdf

Statement of Work

Vindicator Intrusion Detection System (IDS) Installation

Building #91650/Rooms 1238, 2024, 2014, 2031, 2027

23rd Special Tactics Squadron

Hurlburt Field, FL

25 August 2025

1.0. DESCRIPTION OF SERVICES:

1.1 A Honeywell-Vindicator certified contractor shall provide all necessary supervision, labor, travel, materials, tools, equipment, accessories and other items necessary to safely complete the installation of all components to Air Force standards set forth in certification standards DAFI 31-

101, Security Procedures for Head Quarters 25th Air Force and related safety publications to include TIA/EIA-570, Residential Telecommunications Cabling Standards, TIA/EIA-607, Commercial Building Grounding and bonding requirements for Telecommunications, NFPA 70

National Electric Code (NEC), NFPA 101, Life Safety Code, NFPA 780, Standard for the installation of Lightning Protection Systems and the Security Forces Non-Nuclear CMD list, dated 29 April 2024. The contractor will also follow any applicable UFC guidance for the project described below. The contractor shall provide all the necessary tools and equipment to complete the upgrade. This includes any ladders, lifts, hoists, power tools, safety gear or other equipment, tools, supplies necessary to complete installation and provide necessary testing of all installed components.

1.2 SYSTEM REQUIREMENTS:

1.2.1 The contractor shall install a Vindicator Intrusion detection system (IDS) in building

#91650/room 1238, 2024, 2014, 2031, 2027, compatible with Windows 10. The contractor shall provide any support equipment required to integrate new intrusion detection equipment (IDE).

The contractor shall install the Vindicator platform. The Vindicator platform shall meet USAF

Authority to Operate (ATO). The contractor shall install the IDE from the current Air Force

Non-Nuclear IDS Equipment. The system will include Balance Magnetic Switches, 360 Degree

Motion Sensors, Tamper Switches, Vindicator compatible Keypads, a Honeywell graphical keypad (room 2027 will be a SCIF), and all hardware, fittings, wire, backup power supplies and firmware to complete the requirement. Upon completion of work, this system must provide the capability to detect alarms and initiate responses in a manner that will aid preventing damage, destruction, or unauthorized access to the resource.

1.3 EQUIPMENT PLACEMENT:

1.3.1 The contractor shall install and program the alarm panel, keypad, and the components to all panel locations within the alarmed facility, Open Storage Areas (OSA) listed in attachment 1. All the equipment below will be compatible with Windows 10. The contractor shall provide the following listed below:

a. OSA Intel Room (Room 2024) equipment will consist of the following:

• One (1) 360° PIR

• One (1) High Security Switch (HSS) with bracket for entry and exit doors.

• One (1) Vindicator Compatible Arm/Disarm Keypad

• One (1) IDS enclosure w/mounting panel, and keylock handle composed of the following items:

o One (1) Honeywell Vindicator 1500 Security Device, Wire/RJ45 o One (1) Enclosure Tamper switch o One (1) LifeSafety Power Distribution Module o Two (2) 12 VDC 20AH Backup Batteries o One (1) Battery Test Switch o One (1) Omron Relay

• One (1) Power Enclosure w/One (1) Enclosure Tamper Switch

b. OSA JTSAC Simulator (Room 2014) equipment will consist of the following:

• Two (2) High Security Switch (HSS) with bracket for entry and exit doors.

• One (1) Vindicator Compatible Arm/Disarm Keypad

• One (1) IDS enclosure w/mounting panel, and keylock handle composed of the following items:

o One (1) Honeywell Vindicator 1500 Security Device, Wire/RJ45 o One (1) Enclosure Tamper switch o One (1) LifeSafety Power Distribution Module o Two (2) 12 VDC 20AH Backup Batteries o One (1) Battery Test Switch

c. OSA Radio Storage (Room 2031) equipment will consist of the following:

• One (1) High Security Switch with bracket for entry and exit doors.

• One (1) Vindicator Compatible Arm/Disarm Keypad

• One (1) IDS enclosure w/mounting panel, and keylock handle composed of the following items:

o One (1) Honeywell Vindicator 1500 Security Device, Wire/RJ45 o One (1) Enclosure Tamper switch o One (1) LifeSafety Power Distribution Module o Two (2) 12 VDC 20AH Backup Batteries o One (1) Battery Test Switch

d. Intel SCIF (Room 2027) Equipment will consist of the following:

• One (1) High Security Switch with bracket for entry and exit doors.

• One (1) Honeywell Keypad

• One (1) IDS enclosure w/mounting panel, and keylock handle composed of the following items:

o One (1) Honeywell V3 Network Security (IDS & ACS) Firmware 4.3.2

SP VR22 OR V5 Network Security (IDS & ACS) Firmware 4.5.2 SP

VR22

o One (1) Enclosure Tamper switch o One (1) LifeSafety Power Distribution Module o Two (2) 12 VDC 20AH Backup Batteries o One (1) Battery Test Switch

e. Armory (Room 1238) Equipment will consist of the following:

• One (1) High Security Switch with bracket for entry and exit doors.

• One (1) Vindicator Compatible Arm/Disarm Keypad

• One (1) IDS enclosure w/mounting panel, and keylock handle composed of the following items:

o One (1) Honeywell Vindicator 1500 Security Device, Wire/RJ45 o One (1) Enclosure Tamper switch o One (1) LifeSafety Power Distribution Module o Two (2) 12 VDC 20AH Backup Batteries o One (1) Battery Test Switch

f. Miscellaneous Equipment

• The contractor must provide and install all necessary consumable materials

(conduit, cabling, etc) to provide connectivity.

• The contractor must provide and install all necessary power distribution for installed components and devices to ensure a fully operational system.

• The contractor must fully comply with the AFLCMC/HBU Non-Nuclear

Configuration Management Database (CMD) Equipment Approval List

• The contractor must perform all necessary head end programming in support of this effort and work with the USAF sustainment contractor for coordination of alarm point ranges, Device ID’s & IP Addresses, and all information necessary for successful programming.

1.5 Attachment 1, the diagram shows the facility office perimeter that shall be covered with sensors. For rooms 2024, 2014, 2031, 2027 the contractor shall provide and install six (6) BMS

Sensors, six (6) PIR Sensors, and one (1) HSS Sensor as outlined in the diagram. The contractor shall install one (1) Vindicator door access system (door identification reader). The X-10 lock shall be provided by the Government for the contractor’s use in installation. The contractor shall coordinate any changes to panel locations through Security Forces and Civil Engineer

Representative.

1.6 The power and the network connectivity are located within 100 feet of the alarm panel location.

1.7 The contractor shall contact 1 SOSFS/S5E for coordination before any installation to begin to validate all completed work.

2.0 INSTALLATION:

2.1 Al l IDE components such as sensors, junction boxes, communication wiring, battery power, and line supervision shall be individually identifiable to include separate alarm points. No alarm points shall be grouped to show one name and one main area without the ability to identify which individual sensor is activated.

2.2 All alarm points shall be wired to the alarm panel clockwise (left) when entering the room from the main door and shall be connected into the alarm panel in this order from left to right in the panel.

2.3 All junction boxes housing IDE in rooms 1238, 2024, 2014, 2031 shall have two (2) tamper protection switches and three (3) for room 2027 located inside the box.

2.4 The IDE shall have a backup power source, such as a battery, that will provide an uninterrupted eight (8) hours of power. This back up power source must be connected to provide a 30-minute battery failure notification prior to battery failing. This notification must be incorporated into the panel to provide Security Forces with this information.

2.5 Programing to the VCC will not be completed until after base upgrade to Windows 10.

The contractor will install all equipment associated with IDE and wait to complete programming until directed by the ESS NCOIC.

3.0 TESTING:

3.1. CVT. The contractor shall perform a Contractor Verification Test (CVT) upon completion of the IDE installation. When completed the contractor shall notify the ESS that the system is ready for Phase testing.

3.2. Certification Test Requirements. 1 SOSFS/S5E and 1 SOW/IPI or alternate authorities shall conduct functional and operational certification tests for the IDS to ensure the system meets effective standards/compliance requirements.

Note: This test and certification process shall be accomplished before the IDS is deemed operational. The testing and certification shall occur in three (3) phases.

3.3. Phase I: The contractor shall perform a Contractor Verification Test (CVT) upon the IDE

Installation. The contractor, the 23 STS representative, and 1 SOSFS/S5E shall witness test

Phase I. The test shall be performed in accordance with the written testing procedures provided in the Installation Design Package (IDP). Any component found to be inoperative during the test or at any time during the installation period shall be brought to the attention of the Security

Forces POC and 23 STS representatives. Acceptance testing shall consist of the following:

intrusion tests, tamper tests, annunciation test, assessment test, AC power loss test, line supervision test, sensor system self-tests, and access control.

3.4. Phase II: Phase II testing is a 72-hour continuous test that ensures all equipment is installed properly and works according to specifications. It shall establish initial expectations regarding false and nuisance alarm. The AFTO 747, Communications and Information Systems

Acceptance Certificate, transferring the system shall be signed after successful completion of

Phase II. AFTO 747 signifies the completion of the project and provides acceptance of the installed system. The completion of this form certifies the system has been tested and accepted as installed, and all noted exceptions shall be corrected by the party responsible to the satisfaction of the government POC / 1 SOSFS/S5E.

3.5. Phase III. Phase III testing is a 30-day continuous operational test to assess how well the system performs in its normal operating mode on a permanent basis. This test is to detect any premature or latent defects in the equipment or components and to allow the operators and maintainers an opportunity to assess the adequacy of logistics support and assess the false and nuisance alarm rates of the system. After successful completion of this Phase III, the 23 STS shall request MAJCOM certification.

3.6. Phase II and III testing shall be completed by the Government.

3.7. NAR/FAR Rates:

3.7.1 Interior IDS:

Interior false and nuisance alarms should be extremely limited. No more than one false alarm per individual sensor point within the previous 30 days is acceptable. No more than three nuisance alarms per individual sensor point within the previous 30 days is acceptable.

3.7.2 Exterior IDS:

No more than one false alarm per individual sensor point within the previous 24-hour period is acceptable. No more than three nuisance alarms per individual sensor point within the previous

24-hour period is acceptable.

3.7.3 Individual Resource IDS:

IDS configured to protect an individually exposed resource, such as an aircraft, must not have more than three false alarms or three nuisance alarms per individual sensor point within the previous 24-hour period.

4. TRAINING. The installer shall provide basic training for any altered IDE, newly installed IDE, or IDS. The training shall include information on how to secure facility, how to place facility in "access" status, how to change user pin codes, how to test all alarm point/sensors and components, and the initiation of work orders through the respective installers. The contractor shall provide the user with a user manual, or any other written verbiage stating how to utilize and install the device to activate and deactivate the system.

5. COLLATERAL SUPPORT:

5.1 The Government shall provide the following products in support of this effort.

5.1.1 Provide assistance in acquiring related permits that may be necessary for work performed.

5.1.2 Coordinate access into the installation.

5.1.3. Provide storage space/staging area for materials and an operating space with telephone capability for the installation team. Building 91065, Room #2024 shall act as the main staging area for the contractor during the installation process. To request additional space contact 23 STS project manager. The government is not responsible for materials left unattended or unsecured.

5.1.4. 23 STS shall provide a host escort for the contractors during the installation. The 23

STS project manager shall coordinate with facility/users to ensure rooms and work areas are available when access is required.

6.0. SYSTEM MAINTENANCE:

6.1. The contractor shall provide a one year of warranty maintenance and replacement parts on all new equipment installed by the contractor. The warranty shall start on the day the government accepts the entire project.

6.2. Infrastructure Malfunctions. The contractor and government representatives will coordinate and troubleshoot problems during the installation and the one-year warranty/maintenance period.

7.0 SPECIAL REQUIREMENTS:

7.1. All wiring connections shall be secured using standard security connectors that meet standard fire codes for security systems. All wiring shall be clearly labeled, and wiring diagram provided to 1 SOCONS, 1 SOCES, and 1 SOSFS/S5E.

7.2. A joint quality assurance inspection shall be conducted prior to government acceptance and after system operability testing.

7.3. The contractor shall assign employees who possess adequate certification to handle all required product installation tasks to meet OSHA, base safety requirements and annunciator certification standards. The contractor shall ensure that the product meets the required safety standards at the time the project is completed and accepted by the government. The contractor shall provide the standard commercial product warranty certificate specifying the warranty period for the system on a PDF file.

7.4. All IDS wires/cables shall be routed through conduit. Cabling installed through the ceiling shall be air plenum-rated conduit.

7.5. The contractor shall develop an installation schedule and coordinate with the 1 SOSFS/S5E

POC prior to work completion. Installation scheduling coordination may take up to forty-eight hours with subordinate units. If re-scheduling is required, the contractor should make every attempt to adhere to the forty-eight-hour window prior to the notification change request.

8.0. SECURITY REQUIREMENTS:

8.1. The contractor shall always comply with base security requirements to include base pass requirements and personnel security clearance.

8.2. The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s).

cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished contractor identification badges while visiting or performing work on the installation.

8.3 The contractor will be required to complete a Contractor Employee Listing (to be provided by the government) for employees to gain access to the installation:

8.3.1. The Contractor Employee List. This form must list every employee requiring access.

Every time employees change; it must be updated to reflect additions and/or deletions. Identify those individuals you wish to have escort authority by including the word “Escort” or “E” next to their names. Limit the number of individuals designated as escorts to a reasonable number (i.e., one or two). For work locations please use building numbers or areas (i.e., Building #91650.).

Once completed, send the list to the Contracting Office representative in EXCEL format using secure means such as hand carry, mail, or electronic mail. The Contracting Officer will then prepare and attach a cover letter and forward the Employee List to the Visitor Control Center.

8.3.2. During the performance of the contract, the contractor shall be responsible for obtaining the required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

8.3.3. When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Volume 1, The Air Force Installation Security

Program, and AFI 31-501, Personnel Security Program Management, citing the appropriate paragraphs as applicable.

8.3.4. Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

8.3.5. Failure to comply with these requirements may result in the withholding of final payment.

9.0 Retrieving Identification Media. The contractor shall be responsible for retrieving all identification media including visitor passes from employees who depart for any reason before the contract expires. For example, termination for cause, retirement, etc.… Visitor passes shall be retrieved and turned into 1SOSFS Pass and Registration/Visitor Center once the contractor and its employees leave the base for the last time.

10.0 Traffic Laws. The contractor and employees shall comply with the Base traffic regulations.

11.0 Weapons, Firearms, Ammunition. The contractor employees are prohibited from possessing weapons, firearms, or ammunition or within the contractor vehicle or privately owned vehicles while on the Government installation.

12.0 OPEN STORAGE AREAs. Contractor employees performing work in the controlled areas described as Open Secret Storage Area (OSSA) must meet prescribed requirements

IAW DoDM 5200.0 l, Volume 3, Enclosure 3, Para 2.a.(l). "IDS Installation and

Maintenance Personnel. Alarm installation and maintenance shall be accomplished by

U.S. citizens who have been subjected to a trustworthiness determination (NACI) according to Reference (l)." The contractor shall provide information of individuals to the government for clearance verification prior to commencing work.

End of SOW

Attachment:

Diagram of Room

PI

GB

DC

DA

TV

TV

1:4

T

110PP-100

UTPP-48

FOPP-24

OFDP-24

WM

PR

EB

ES

S O

F S

P E

C

IA

L T

A C

T

IC

S O

P E

R A

T

IO

N S

F A

C

IL

IT

Y

H

U R

L B

U R

T F

IE

L D

L

T E

L E

C O

M M

U N

IC

A

T

IO

N S

L E

G E

D e s c ri p ti o n

R v is io s

A B C D

TELECOMMUNICATIONS LEGEND

E F G H I

TELECOMMUNICATIONS INFRASTRUCTURE SYSTEM (TIS)

1 BASIC VOICE/DATA OUTLET TYPES WITH SUBSCRIPT MODIFIERS SHOWN BELOW

WORK AREA OUTLET, WALL MOUNTED AT 18" AFF, NOTATION ADJACENT TO OUTLET

INDICATES NUMBER OF CABLES [AS SHOWN, (3)]. IF NO NOTATION IS SHOWN, THEN

PROVIDE 3 CABLES, WITH PULLSTRING FOR SPARE, TYPICAL ALL DEVICES. OUTLET

MUST HAVE THREE SPARE PORTS.

TELEPHONE OUTLET, WALL MOUNTED AT 54" AFF, FOR WALL INSTRUMENT. PROVIDE 1

CABLE UNLESS OTHERWISE NOTED.

DATA OUTLET, WALL MOUNTED AT 18" AFF. PROVIDE 2 CABLES MINIMUM, UNLESS

OTHERWISE NOTED BELOW. (4D) = 4 DATA PORTS AND CABLES WITH PULLSTRING FOR

SPARE.

TELEVISION DISTRIBUTION SYSTEM (TVDS)

TELEVISION OUTLET, WALL MOUNTED BEHIND FLAT PANEL, BUT NOT OBSTRUCTED

BY MOUNT (UNLESS OTHERWISE NOTED). IF SHOWN ADJACENT TO A 'TVF' DATA

OUTLET, PROVIDE AS A COMBINATION OUTLET WITH TELEVISION COAX

CONNECTOR AND (2) CAT 6 JACKS ON SHARED FACEPLATE.

AMPLIFIER, WALL MOUNTED.

TERMINAL CABINET, WALL MOUNTED.

LINE TERMINATOR, MOUNTED IN JUNCTION BOX, ABOVE ACCESSIBLE CEILING.

SPLITTER/MIXER, INPUT-OUTPUT CONNECTOR RATIO AS SHOWN, MOUNT IN

JUNCTION BOX ABOVE ACCESSIBLE CEILING.

ACCESS CONTROL SYSTEM

THIS SYSTEM IS PART OF THE ESS. FINAL LOCATIONS ARE TO BE COORDINATED WITH

SECURITY PERSONNEL.

PROVIDE THE ACCESS CONTROL SYSTEM FOR THE SECURE AREA AND INTEL SUITE WITH

'CARD-IN / CARD-OUT' FUNCTIONALITY AND CAPABILITY OF RECORDING LOG OF THESE

ACTIVITIES.

PROXIMITY/CARD READER, PROVIDE SINGLE GANG JUNCTION BOX WITH 1"C.

WHERE PROXIMITY/CARD READER AND EXIT BUTTON ARE SHOWN BACK TO

BACK, PROVIDE ONE 1"C FOR THE PAIR OF DEVICES. ROUTE CONDUIT AND

CABLING BACK TO SERVING TELECOMMUNICATIONS ROOM.

PROXIMITY/CARD READER, SAME AS ABOVE. SUBSCRIPT 'A' DENOTES FOR

US Army Corps of Engineers Mobile District

SUBSCRIPT MODIFIER LEGEND FOR VOICE/DATA OUTLET TYPES:

*** NOTE: COORDINATE WITH ARCHITECTURAL, THE HEIGHT OF ALL COUNTER

TOPS, BACKSPLASHES, TABLE TOPS OR SINKS WHICH AFFECT THE

MOUNTING HEIGHT OF OUTLETS.

CL - CEILING MOUNTED OR MOUNTED TO STRUCTURE ABOVE.

CT - COUNTER TOP, MOUNT OUTLET 4" ABOVE COUNTER TOP,

BACKSPLASH OR TABLE TOP TO CENTER OF OUTLET.

CW- MOUNTED IN CASEWORK

MF - MOUNTED IN MODULAR FURNITURE. CONTRACTOR MUST

PROVIDE CABLING, OUTLETS AND JACKS. ALL CABLING MUST BE

PROVIDED & INSTALLED BY THE TELECOM CONTRACTOR PER

DISTRIBUTION TAP, NUMBER DENOTES NUMBER OF TAPS, 12 TAPS AS SHOWN.

GROUNDING BLOCK, CONNECT TO BUILDING GROUND.

TV TV CIRCUIT IN CONDUIT.

VIDEO TELECONFERENCE (VTC) SYSTEM

A ACTIVITY LOGGING ONLY. THIS READER DOES NOT OPERATE DOOR CONTROLS.

EXIT BUTTON, PROVIDE SINGLE GANG JUNCTION BOX WITH 1"C. WHERE

PROXIMITY/CARD READER AND EXIT BUTTON ARE SHOWN BACK TO BACK,

PROVIDE ONE 1"C FOR THE PAIR OF DEVICES. ROUTE CONDUIT AND CABLING 2

BACK TO SERVING TELECOMMUNICATIONS ROOM.

ELECTRIC STRIKE, PROVIDE 1"C FROM THE WALL/JAMB STUDS. ROUTE CONDUIT

BACK TO SERVING TELECOMMUNICATIONS ROOM. COORDINATE WITH DOOR

HARDWARE.

TERMINAL CABINET, SIZE AS NOTED OR 6" x 6" x 4" MINIMUM, WITH WOOD

FURNITURE MANUFACTURER'S RECOMMENDATIONS.

S - SIPRNET DATA OUTLET. OUTLETS MUST BE PROVIDED IN

PROTECTIVE DISTRIBUTION SYSTEM (PDS)

TS - DATA OUTLET FOR TOP SECRET (SOCRATES) SYSTEM, PROVIDE WITH

4 WIRED PORTS. OUTLETS MUST BE PROVIDED IN PROTECTIVE

DISTRIBUTION SYSTEM (PDS)

W - WALL MOUNTED, FOR TELEPHONE.

CONDUIT STUB-UP.

3 MULTI SERVICE, HAND ACCESS, REACH-IN TYPE, FLUSH FLOOR BOX WITH ACTIVATION

COVER PLATE. PROVIDE VOICE/DATA OUTLET. PROVIDE (2) 1-1/4" CONDUITS TO EACH

LOCATION; (1) FOR VOICE/DATA SERVICE AND (1) SPARE WITH PULLSTRING. FOR

POWER REQUIREMENTS SEE ELECTRICAL LEGEND E-001. SEE DETAIL 'F4' ON SHEET

VTC

WALL MOUNTED TELECOM JUNCTION BOX, MOUNTED AT 18"AFF UNLESS

OTHERWISE NOTED. PROVIDE GROMMET FACEPLATE, SEE DETAIL E2/ET502.

SHELF MOUNTED SPEAKER, BY OTHERS.

SHELF MOUNTED CAMERA, BY OTHERS.

CEILING MOUNTED MICROPHONE, BY OTHERS.

VTC CABLING, BY OTHERS.

BACKBOARD, HINGED DOOR AND TERMINAL STRIPS.

AC ACS CABLING IN CONDUIT. PROVIDE CAT 6 CABLING OR AS RECOMMENDED BY

SYSTEM MANUFACTURER.

Robert M. Huggins Reg. No. 256149 expires 12-31-22

NO. 26286

PROFESSIONAL

TB

4 DB

TBB

PET

12"x4"CT

TEQR

S-004.

WALL MOUNTED TELECOM JUNCTION BOX, MOUNTED AT 18" AFF UNLESS OTHERWISE

NOTED. PROVIDE FLEXIBLE CONNECTION TO EQUIPMENT. NUMERAL DENOTES

QUANTITY OF OUTLETS SERVED.

WALL MOUNTED TELECOM JUNCTION BOX, MOUNTED AT 18" AFF UNLESS OTHERWISE

NOTED.

TELECOMMUNICATIONS CABLE IN CONDUIT, SEE PDS OUTLET WIRING DETAIL FOR

NUMBER AND TYPE OF CABLES.

COPPER BACKBONE IN CONDUIT.

FIBER BACKBONE IN CONDUIT.

TELECOMMUNICATIONS BACKBOARD, 96"H WITH LENGTH/WIDTH AS SHOWN ON PLAN,

FIRE RETARDANT, AC GRADE PLYWOOD WITH LABEL AND FIRE RATING STAMP VISIBLE.

CROSS CONNECT BLOCK (SINGLE LINE DIAGRAM). 'PET' DENOTES PROTECTED

ENTRANCE TERMINALS.

CROSS CONNECT BLOCK (FLOOR PLANS)

TELECOMMUNICATIONS CABLE TRAY. BASKET WIRE-TYPE IN CORRIDORS AND LADDER

TYPE CABLE TRAY IN TELECOMMUNICATIONS ROOMS. SIZE AS INDICATED ON PLANS,

MINIMUM 12"W x4"D.

TELECOMMUNICATIONS EQUIPMENT RACK, 4-POST TYPE, 24"W x 36"D x 84"H UNLESS

OTHERWISE NOTED.

OPTICAL FIBER DISTRIBUTION PANEL, RACK MOUNTED, 24-PORT.

FIBER OPTIC PATCH PANEL, RACK MOUNTED, 24-PORT.

PATCH PANEL, UNSHIELDED TWISTED PAIR CABLES, RACK MOUNTED, 48-PORT.

110 VOICE CROSS CONNECT, RACK MOUNTED, 100-PORT.

RACK MOUNTED WIRE MANAGER.

INTRUSION DETECTION SYSTEM (IDS)

THIS SYSTEM IS PART OF THE ESS. THE SYSTEM IS JUNCTION BOXES AND CONDUIT WITH PULL

STRING ONLY. FINAL LOCATIONS ARE TO BE COORDINATED WITH SECURITY PERSONNEL.

INTRUSION DETECTION PANEL, BY OTHERS.

PASSIVE INFRARED MOTION DETECTOR, CEILING MOUNTED, UNLESS OTHERWISE

NOTED, BY OTHERS.

DURESS ALARM BUTTON.

GLASS BREAK SENSOR, CEILING MOUNTED, BY OTHERS.

BALANCED MAGNETIC DOOR CONTACTS, BY OTHERS.

ID IDS CIRCUIT IN CONDUIT. 1" MINIMUM CONDUIT WITH PULL STRING. CABLING, BY

OTHERS.

MISCELLANEOUS

SEE NOTE 27, SHEET ET002, FOR TYPICAL DEVICE MOUNTING HEIGHTS.

GENERIC SHAPE FOR FLUSH / RECESSED ENCLOSURE.

GENERIC SHAPE FOR SURFACE MOUNTED ENCLOSURE.

CONDUIT CONCEALED BELOW FLOOR SLAB. 5

CONDUIT TERMINATION ABOVE ACCESSIBLE CEILING. PROVIDE NYLON

INSULATED BUSHING, BONDING BUSHING AND FIRE STOP, WHERE REQUIRED.

NUMBER OF CONDUITS

SIZE OF CONDUITS

TMGB

TGB

BCT

PDS

TELECOMMUNI

CATIONS MAIN

GROUNDING

BUSBAR, 24

CIRCUIT, 400A

PANELBOARD

NEUTRAL BUS,

ATTACHED TO

WALL WITH

SCREWS.

TELECOMMUNICATIONS

GROUND BUS, 24 CIRCUIT

225A PANELBOARD NEUTRAL

BUS, ATTACHED TO WALL

WITH SCREWS.

BONDING CONDUCTOR

FOR

TELECOMMUNICATIONS,

IN CONDUIT AS

REQUIRED. CONDUCTOR

MUST BE SIZED PER TIA-607-

B; TABLE 1 - TBB CONDUCTOR

SIZE VS LENGTH, WITH A

MINIMUM #6 AWG. SIZE

CONDUIT PER NEC.

PROTECTED DISTRIBUTION

SYSTEM.

CONDUIT NUMBER

NUMBER OF INNERDUCTS IN

CONDUIT

INNERDUCT NUMBER

T

IDP

ACTC

PR

TVTC

N B

S y m b o l N o

D a te p p ro v d a te

J

U N

E

F il e

N o

M E

Y

I.

S

.O

S h e e t F il e

N a m e

S o li c it a ti o n N u m b r:

W

8-

-R

-0

D e s ig n e d B y:

U G

G

IN

ra w n

B y

R H

U G

G

C h e c k e d

M

T K

IS

O v ie w e d

K

H

IL

.S

A

R M

Y E

N G

IN

E

E R

D

IS

T R

IC

R P

S O

F E

N G

IN

E

E

B

IL

E

A L A

B A

(1) 4" C

1 (3) 1" FABRIC INNERDUCT

1 24ST, SM FIBER

3 SPARE

CONDUIT #1 CONTENTS CONTENTS OF EACH INNERDUCT

H

E

E

T

I

D

E

N

T

I

F

I

C

A

T

I

O

N

ET

SHEET 503 of

A B C D E F G H I

2 SPARE

C U s e rs

\h u g g in s r\

D o c u m e n ts

\2 -E

R o b e rt h .r v t

/1

/2

:2

:1

P s ig n e d B y

R H

U G

G w n

U G

G e c k e d

T K

IS

v ie w e d B y

K C

H

IL

F S

P E

C

IA

L T

A C

T

IC

S O

P E

R A

T

IO

C

IL

R

L B

U R

T F

IE

L D

L E

C O

M F

L O

O R

P L A

N

B L O

C K

G

NOTES:

1. OUTLETS AND JUNCTION BOXES FOR CONNECTIONS TO

MONITORS. SECURE OUTLETS TO STRUCTURE ABOVE,

ADJACENT TO MONITOR SUPPORTS.

of Engineers

5.7

FIRE PUMP

1G10

1G10-01

FOR TIMECLOCK

FOR ELECTRICAL

SERVICE METER

1G09-02

ELEC

1G09

W W 1G09-01 1G09-03

W 1G07-01

1G03-08

1G03-07

ARMORY OFF

1G03

1G03-06

1G03-05

3D 1G03-01

1G03-04

1G03-03

1G03-02

1G05-09

1-1/4"C

1G05-06

T TV

WALL MOUNTED DC

NOTE 1

4.9

WAR

READINESS

1G07

(2) 1-1/4"C

1G05-07

3D 3D T

1G05-10

1G05-08

ARMORY

1G05-01

1G05-02

DC WEAPONS

CLEAN ROOM

1G01

DC

3 WALL MOUNTED,

ON COLUMN

expires 12-31-22 3

4.4 1G05-05

1G05-04

1G05-03

IDS

4 A B C C.3 C.8 D D.2 D.5 D.9 E E.2 E.4 4

5 5

1A

1B

1C

1F 1D

PLAN NORTH FIRST FLOOR KEY PLAN 6

1G05

1G

N

I te

J

U N

E

F il e

N o

M E

Y

I.

S

.O S h e e t F il e

N a m e

U .S

A

R M

Y E

N G

IN

E

E R

D

IS

T R

R P

S O

F E

N G

IN

E

E

B

IL

E

A L A

B A y m b o l

N o

D e s c ri p ti v is io p ro v li c it a ti o n N u m b

8-

-R

-0

SHEET

TELECOM FLOOR PLAN - BLOCK 1G IDENTIFICATION

SCALE: 1/8" = 1'-0"

0 4' 8' 16' ET117

SCALE: 1/8"=1'-0" SHEET 511 of 565

U s e rs

\h u g g in s r\

D o c u m e n ts

\2 -E

R o b e rt h .r v t

/1

/2

:2

:5

3D s c ri p ti v is io

8.2

2A25-08 2A25-09

2A25-07

2A25-10

E4

ET402

MED STOR

W 2B09-01

2B09-02

NARC

2B11

COMM

2B03

2B02-01

BREAKROOM

2B02

1-1/4" EC TO ABOVE

ACCESSIBLE CEILING

FOR RELAY MONITOR

FUNCTIONS

LOCATE OUTLETS

NOTES:

1. SURFACE MOUNTED ENCLOSURE AND (6) 4"EC FROM

EXTERIOR TELECOM JUNCTION BOX, SEE SHEET ET115

AND E5/ET402 FOR DETAILS. ROUTE CONDUIT ABOVE

ACCESSIBLE CEIILING.

2. PROVIDE A MINIMUM OF 8 INCHES OF SLACK CABLE AT

THIS LOCATION.

3. PROVIDE 20 FEET OF SLACK CABLE AT THIS LOCATION

TO FACILITATE CABLE ROUTING TO SWITCH AND ANY

MINOR VARIATIONS OF FINAL WORKSTATION

POSITIONING.

4. ONCE JTAC INSTALLATION IS COMPLETE, PROVIDE LOW-

VOLTAGE CABLING REQUIRED TO FINISH CONNECTIONS

OF EMERGENCY POWER OFF SYSTEM.

5. SURFACE MOUNTED ENCLOSURE AND (3) 4"EC FROM

EXTERIOR TELECOM JUNCTION BOX, SEE SHEET ET115

AND G5/ET402 FOR DETAILS. ROUTE CONDUIT ABOVE

ACCESSIBLE CEIILING.

6. DATA OUTLET FOR VTC CAMERA, MOUNTED AT 5'-0" AFF.

PROVIDE CAMERA AND SHELF TO THE RIGHT OF THE

MONITOR ARRAY. COORDINATE/CONFIRM MONITOR

Mobile District

6.8

2A25-06

2A25-05

RADIO

WRKSTNS

2B25

2A25-14

2A25-15

2A25-11

2A25-12

2B09-06

3D

2B09

2B09-05

+90"

FOR TEMPERATURE

MONITORING SYSTEM

2B09-04

CORR

2BC2

2B09-03

KP

W 2B16-01

2B07-01

LAC

2B07

S COMM

2B05

2BC1

FOR CONNECTION

TO LECTERN

CLASSROOM

2B04

BEHIND TV/MONITOR

FOR CONNECTION

TO LECTERN

SIZES WITH INTEL PERSONNEL PRIOR TO FINALIZING

CAMERA LOCATION. 2

7. ALL CIRCUITS, CONDUITS AND OTHER TRADE UTILITIES

NOT SERVING THIS AREA MUST ROUTE AROUND THE

PERIMETER AND MUST NOT PENETRATE THE PERIMETER

WALL.

8. PROVIDE CARD READERS ON THE INTERIOR AND

EXTERIOR OF THE DOOR TO THE INTEL SUITE, TO

SUPPORT 'CARD-IN / CARD-OUT' FUNCTIONS.

9. COORDINATE EXACT CONDUIT STUB-UP LOCATIONS

WITH JTAC SIM EQUIPMENT VENDOR.

2A25-16

2A25-17

2A25-13

CORR

2BC3

+60" +60"

2B04-05 2B04-04 2B04-03 2B04-02

6.3

2A25-04

JAN

2B17

ELEC

2B1 6

TLT, W

2B15

STOR

2B 06

T T TV TV T T 2B04-01S

2A25-03

2B20-02

2B20-03S

S S

TLT, M

2B18

1-1/4"EC

T S 2B21-02S

SECURE AREA

COMM SEE SHEET ET402 FOR

2B12-02

2B12-01

SIM OFFICE

2B10

TV

2B12-03

2B12-04

NOTE 9

JTAC SERVER

2B14

SEE SHEET ET402

FOR EQUIPMENT

LAYOUT IN THIS

ROOM

Reg. No. 256149 expires 12-31-22 3

2B20-05S 2B21-01 2B24 EQUIPMENT LAYOUT KP NOTE 2 4"C FOR DATA

2A25-01 NOTE 8

S

PR A S

2B20-06

2B20-04 2B20-01S

2B20-09S

2B20-10

2B20-08

S

2B20-11S

NCOIC

2B21 2B21-03

NOTE 7 IN THIS ROOM CORR

2BC5

DC EPO2

2B12-01

EPO1

NOTE 3

CABLES

2"C SPARE

RADIO STOR

2A25-02

NOTE 6

2B20-25S

2B20-24 +60"

2B20-07S

INTEL

PI 2B20

2B23

2B08-01 2B08-02

ATC SIM

2"C

(2) CAT6 CABLES IN

NOTE 9

4"C FOR DATA CABLE

FROM WORKSTATION

TO SIMULATOR

2B25A 2BC4 +90" 2B20-27 NOTE 7

S SEE SHEET ET402 FOR 2B08 2"C 1-1/4"C FOR EMERGENCY

2B20-23

+90"

2B20-26

2B20-12

2B20-13S

2B22-01S

2B22-02

EQUIPMENT LAYOUT

IN THIS ROOMS

SYSTEM SHUTDOWN

STAIR

2BS3

1-1 /4"EC (TYP)

2B20-22

2B20-21S

2B20-20

2B20-16S

2B20-17

2B20-19S

2B20-18

S

2B20-14S

2B20-15

OIC/DEP

2B22

2B22-03

2B22-04S

NOTE 7

2B08-04

2B08-03

2B12-03

JTAC SIM

2B12

NOTE 4

2B12-02

NOTE 5 S S S T

E.2

E.4 E.9 F

F.5 F.8

E6

G H

H.3

J J.2

J.5

K K.2

L L.5

2A

2B

V

T T T

T T T

E

S H

E E

T E

T

F

Q

U

IP

M E

N T

L A

Y O

H E

S E

R O

O e s ig n e d B y

R H

U G

G w n

U G

G e c k e d

T K

IS

v ie w e d B y

K C

H

IL

te

J

U N

E

F il e

N o

M E

Y

I.

S

.O S h e e t F il e

N a m e

S O

F S

P E

C

IA

L T

A C

T

IC

S O

P E

R A

T

IO

C

IL

R

L B

U R

T F

IE

L D

A

R M

Y E

N G

IN

E

E R

D

IS

T R

R P

S O

F E

N G

IN

E

E

B

IL

E

A L A

B A

L E

C O

M F

L O

O R

P L A

N

B L O

C K m b o l N o

D p ro v li c it a ti o n N u m b

8-

-R

-0

PLAN NORTH SECOND FLOOR KEY PLAN

TELECOM FLOOR PLAN - BLOCK 2B IDENTIFICATION

SCALE: 1/8" = 1'-0"

0 4' 8' 16' ET123

SCALE: 1/8"=1'-0" SHEET 514 of 565

U s e rs

\h u g g in s r\

D o c u m e n ts

\2 -E

R o b e rt h .r v t

/1

/2

:2

:1

2B23

2B24

2B05

D e s c ri p ti v is io

TBB (TYP)

SPACE RESERVED FOR FIRE

PROTECTION EQUIPMENT

MECHANICAL EQUIPMENT

BACKBONE CONDUITS

FROM COMM 1A19

NOTES:

1. PROVIDE CASCADE-TYPE CABLE DROP FITTINGS ABOVE

EQUIPMENT RACK.

2. WALL MOUNTED ENCLOSURE, 12" DEEP, REMOVABLE

FRONT COVER, SIZE AS SHOWN.

Mobile District

1 2B03-02 W

NOTE 4

COMM2A2 18"x4"CT

TBB (TYP) (3) 4" SLEEVES

3. TO EXTERIOR MOUNTED ENCLOSURE, SEE SHEET ET115. 1

ROUTE CONDUITS ABOVE ACCESSIBLE CEILING.

TGB

BACKBONE CONDUITS

FROM COMM 1A19

2B03-01

CATC IDTC

TEQR-2B03-01

TEQR-2B03-02

TEQR-2B03-03

J

18"x4"CT

(3) 4" SLEEVES

2B05-01

TEQR-2B05-01

TEQR-2B05-02

COMM2A1

MECHANICAL

EQUIPMENT

4. PROVIDE ALL TEQRS AS ENCLOSED LOCKABLE TYPE

RACKS.

5. ALL 'S' & 'TS' OUTLETS MUST BE SURFACE MOUNTED AND

MUST BE PROVIDED STRICTLY FOLLOWING ALL PDS

CRITERIA. ALL CONDUITS LEAVING THIS SPACE MUST BE

COORDINATED WITH MECHANICAL, FIRE PROTECTION

AND OTHER TRADES TO GROUP PENETRATIONS INTO A

SINGLE GENERAL LOCATION.

6. CONTRACTOR MUST PROVIDE MECHANICAL DUCT

MOUNTED SOUND MASKING SPEAKERS IN ALL DUCTS

ENTERING THE SECURE AREA SPACE. SPEAKERS MUST

BE DESIGNED SPECIFICALLY FOR MOUNTING INSIDE

MECHANICAL DUCT. COORDINATE QUANTITIES AND LOCATIONS WITH MECHANICAL DESIGN. PROVIDE

2 B2

TELECOM ROOM 2A (2B03)

SCALE: 1/4" = 1'-0" TELECOM ROOM 2B (2B05)

SCALE: 1/4" = 1'-0"

SOUND MASKING GENERATOR IN TEQR LOCATED IN

SECURE AREA COMM 2B24. PROVIDE CABLING FROM 2

GENERATOR TO SPEAKERS. BASIS OF DESIGN FOR

SOUND MASKING SPEAKER IS: CAMBRIDGE DYNASOUND

DS2400.

7. PROVIDE CARD READERS ON THE INTERIOR AND

EXTERIOR OF THE DOOR TO THE SECURE AREA, TO

SUPPORT 'CARD-IN / CARD-OUT' AND ACTIVITY LOGGING

FUNCTIONS.

BACKBONE CONDUITS

FROM COMM 1A19

NOTE 3 8. MOUNT PANEL SEMI-RECESSED. ONLY RECESS PANEL

AS DEEP AS FURRING ON WALL. DO NOT PENETRATE

SECURE WALL SYSTEM.

3 EM22A3

TBB (TYP)

6 COMM

CEILING

(6) 4" EC

NOTE 2

IDS

NOTE 8

2B23-01S

2B23-02

TV T

1-1/4"EC

2B23-03

2B24-01 W

MECHANICAL EQUIPMENT

SECOND

FLOOR

4' - 6"

ES

NOTE 6

NOTE 7

TEQR-2B24-01 2B23-04

H.3 TEQR-2B24-02 J

TEQR-2B24-03

H.3 J

2B23-05 TS

SECURE AREA COMM (2B24) RADIO WORKSTATIONS (2B25) - 2B23-22 2B23-06S S

B4 SCALE: 1/4" = 1'-0"

TELECOM ENCLOSURE & CONDUIT

SCALE: 1/4" = 1'-0"

TS 2B23-21

S 2B23-20S

2B23-07

2B23-19

2B23-08 TS

2B23-09S S 4

6.3

CONDUITS FOR SIMULATOR,

SEE ET123 FOR C ONTINUATIO N

BACKBONE CONDUITS

FROM COMM 1A19

6.3

TS 2B23-18

5 S 2B23-17S 2B23-10

TBB (TYP) TGB

JTAC SERVER

2B14 NOTE 1

NOTE 3

2B23-16

2B23-11 TS

2B23-12S S

JTAC SERVER

2B14

18"x4"CT

MECHANICAL

EQUIPMENT

CEILING

(3) 4" EC

TS 2B23-15

S 2B23-14S

S 2B23-13S

2B14-02 W

5 6 2B14-01S

S 6

SECOND

FLOOR

2' - 9"

NOTE 2

H.3 J

L L.5 L

A

C

S E R

V E

2B03 2B03

2B05

2B24

DC

NOTE 5

NOTE 4

N B

T E

Q R

-2 B

-0

T E

Q R

-2 B

-0

T E

Q R

-2 B

-0

"x

4"

"x

4"

4"

4" C

T

"x

4"

F S

P E

C

IA

L T

A C

T

IC

S O

P E

R A

T

IO

C

IL

R

L B

U R

T F

IE

L D

L E

C O

M M

U N

IC

A

T

IO

N S

E N

L A

R G

O M

P L A m b o l N o

D p ro v

E2

E4

B6 te

J

U N

E

F il e

N o

M E

Y

I.

S

.O S h e e t F il e

N a m e

S o li c it a ti o n N u m b

8-

-R

-0

D e s ig n e d B y

R H

U G

G w n

U G

G e c k e d

T K

IS

v ie w e d B y

K C

H

IL

A

R M

Y E

N G

IN

E

E R

D

IS

T R

R P

S O

F E

N G

IN

E

E

B

IL

E

A L A

B A

R (2B14)

SCALE: 1/4" = 1'-0"

L.5

INTEL (2B20) -

TELECOM ENCLOSURE & CONDUIT

SCALE: 1/4" = 1'-0"

ENLARGED SECURE AREA (2B23)

SCALE: 1/4" = 1'-0"

2' 4' 8'

IDENTIFICATION

SCALE: 1/4"=1'-0" SHEET 516 of 565

U s e rs

\h u g g in s r\

D o c u m e n ts

\2 -E

R o b e rt h .r v t

/1

/2

:2

:3

G5

COMM 2B03

INTRUSION DETECTION NOTES:

1. STUB OUT FOR NETWORK CONNECTION WITH BASE

SECURITY OFFICE FOR SYSTEM ALARM.

COORDINATE WITH BASE SECURITY PERSONNEL.

COMM 2B03

TELEVISION DISTRIBUTION NOTES:

1. CONTRACTOR MUST PROVIDE AMPLIFIERS,

SPLITTERS, MIXERS, LINE TERMINATORS, TAPS AND

ANY OTHER PERIPHERALS AS REQUIRED TO

SUPPORT DEVICES SHOWN ON PLANS.

2. CURRENT BASE CABLE TV SERVICE PROVIDER

(COX COMMUNICATIONS) WILL PROVIDE CATV

SERVICE THROUGH EXISTING AND NEW DUCTBANK

SYSTEM. CONTRACTOR MUST VERIFY SERVICE

PROVIDER.

6"

FIRE-RATED

PENETRATION, TYP

CABLE TRAY

TO OTHER TRS

FIRE-RATED

PENETRATION, TYP

CABLE TRAY

TO OTHER TRS

ID

COMM 1A19

ID T

1"C, TYP.

PROVIDE PULL

BOXES AS REQUIRED

COMM 1A19

TV TV

PROVIDE

T PULL BOXES

AS REQUIRED

IDTC

TYPICAL FOR EACH

TR, SEE FLOOR

PLANS FOR EXACT

DEVICE LOCATIONS,

TYPE AND QUANTITY.

CABLE TELEVISION

SERVICE PROVIDER

BUILDING ENTRANCE.

CABLING ROUTED IN

MAIN TELECOM

4 DUCTBANK SYSTEM

FIRST

TVTC

PROVIDE TELEVISION DISTRIBUTION SYSTEM

TERMINAL CABINETS AND PERIPHERALS AS

TYPICAL FOR EACH

TR, SEE FLOOR

PLANS FOR EXACT

DEVICE LOCATIONS,

TYPE AND QUANTITY.

FIRST

FLOOR

6"

INTRUSION DETECTION SYSTEM (IDS)

TERMINAL CABINET, EQUIPMENT, CABLING

AND PERIPHERALS, BY OTHERS (GFGI)

SINGLE LINE DIAGRAM -

INTRUSION DETECTION SYSTEM

SCALE: NOT TO SCALE

REQUIRED FOR DEVICES SHOWN ON DRAWINGS (TYP)

NOTE 1 (TYP)

CABLING AS

REQUIRED,

BY OTHERS.

NOTE 2 (TYP) 6" SQUARE JUNCTION BOX

WITH BLANK COVER ABOVE

ACCESSIBLE CEILING

CEILING

SINGLE LINE DIAGRAM -

B5

TELEVISION DISTRIBUTION SYSTEM

TYPICAL

CONF ROOM

1-1/2"C.

2-GANG DATA BOX, RECESSED

WALL MOUNTED, PROVIDE WALL

PLATE WITH FLEXIBLE GROMMET

1-1/2"C.

2"C.

SCALE: NOT TO SCALE

INSERT. COORDINATE FINAL

JUNCTION BOX LOCATION WITH

ARCHITECTURAL. SEE DETAIL

A1/ET602 FOR COVER PLATE.

FINISHED

COORDINATE

LOCATION WITH

VTC EQUIPMENT

MANUFACTURER

CEILING MOUNTED

MICROPHONES. DEVICES

AND CABLING, BY OTHERS.

M0507 - VIDEO TELECONFERENCING

SYSTEM, CABLING BY OTHERS

LOCATED AT WORKSTATION

(HEADEND EQUIPMENT LOCATION)

2-GANG DATA BOX, RECESSED WALL MOUNTED,

PROVIDE WALL PLATE WITH FLEXIBLE GROMMET

INSERT. COORDINATE FINAL JUNCTION BOX

LOCATION WITH ARCHITECTURAL. SEE DETAIL

TYPICAL, SEE FLOOR

PLANS FOR EXACT

LOCATIONS, TYPE AND

QUANTITY.

LOCATED AT

LECTERN

A1/ET602 FOR COVER PLATE.

TVTC

IDTC

N B

S O

F S

P E

C

IA

L T

A C

T

IC

S O

P E

R A

T

IO

C

IL

R

L B

U R

T F

IE

L D

L E

C O

M S

IN

G

L E

L

IN

E D

IA

G

R A m b o l N o

D e s c ri p ti v is io p ro v

F4 a te

J

U N

E

F il e

N o

M E

Y

I.

S

.O S h e e t F il e

N a m e

S o li c it a ti o n N u m b

8-

-R

-0

D e s ig n e d B y

R H

U G

G w n

U G

G e c k e d

T K

IS

v ie w e d B y

K C

H

IL

A

R M

Y E

N G

IN

E

E R

D

IS

T R

R P

S O

F E

N G

IN

E

E

B

IL

E

A L A

B A

6 SINGLE LINE DIAGRAM -

VIDEO TELECONFERENCING SYSTEM (TYP)

SCALE: NOT TO SCALE

VIDEO TELECONFERENCE NOTES:

1. TERMINATE ALL CONDUITS WITH NYLON INSULATED BUSHING AND BONDING BUSHINGS,

AS REQUIRED. PROVIDE FIRE STOP WHERE REQUIRED.

2. PROVIDE ALL OPEN KNOCKOUTS WITH BUSHINGS.

3. UPON COMPLETION OF SYSTEM INSTALLATION, CONTRACTOR MUST TEST AND VERIFY

THAT SYSTEM IS IN PROPER WORKING CONDITION.

SHEET

IDENTIFICATION

ET503

SHEET 519 of 565

U s e rs

\h u g g in s r\

D o c u m e n ts

\2 -E

R o b e rt h .r v t

/1

/2

:2

:4